Accuracy of an artificial intelligence-based model for estimating leftover liquid food in hospitals: validation study (Preprint)

2021 ◽  
Author(s):  
Masato Tagi ◽  
Mari Tajiri ◽  
Yasuhiro Hamada ◽  
Yoshifumi Wakata ◽  
Xiao Shan ◽  
...  
Keyword(s):  
Confusion Matrix ◽  
Estimation Method ◽  
Absolute Error ◽  
Fermented Milk ◽  
Liquid Food ◽  
Staple Food ◽  
Visual Estimation ◽  
The Mean ◽  
Peach Juice ◽  
Side Dishes

BACKGROUND The accurate evaluation of the nutritional status of malnourished hospitalized patients at a higher risk of complications, such as frailty or disability, is crucial. Visual methods of estimating food intake are popular for evaluating the nutritional status in clinical environments. However, from the perspective of accurate measurement, such methods are unreliable. OBJECTIVE The accuracy of estimating leftover liquid food in hospitals using an artificial intelligence (AI)-based model was compared to that of visual estimation. METHODS The accuracy of obtained using the AI-based model (AI estimation) was compared to that of the visual estimation method for thin rice gruel as staple food, and fermented milk and peach juice as side dishes. A total of 576 images of liquid food (432 images of thin rice gruel, 72 of fermented milk, and 72 of peach juice) were used. Welch's t-test and the confusion matrix were used to examine the difference of mean absolute error between AI and visual estimation. RESULTS The mean absolute errors obtained through the AI estimation approach for side dishes were as follows: fermented milk: 0.63 and peach juice: 0.25. These were significantly smaller than those obtained using the visual estimation approach: fermented milk: 1.40 and peach juice: 0.90. Contrastingly, the mean absolute error for staple food obtained using the AI estimation method (0.99) did not differ significantly from that obtained using visual estimation (0.99). The confusion matrix for staple foods showed variation in the distribution of errors, indicating that the errors in the AI estimation were biased toward the case of many leftovers. CONCLUSIONS AI estimation measures liquid food intake in hospitals more precisely than visual estimation, but its accuracy in estimating staple food leftovers requires improvement.

scholarly journals An Estimation Method of Continuous Non-Invasive Arterial Blood Pressure Waveform Using Photoplethysmography: A U-Net Architecture-Based Approach

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1867
Author(s):  
Tasbiraha Athaya ◽  
Sunwoong Choi
Keyword(s):  
Blood Pressure ◽  
Cardiovascular Health ◽  
Estimation Method ◽  
Absolute Error ◽  
British Hypertension Society ◽  
Non Invasive ◽  
Arterial Blood ◽  
Blood Pressure Waveform ◽  
The Mean ◽  
Mimic Iii

Blood pressure (BP) monitoring has significant importance in the treatment of hypertension and different cardiovascular health diseases. As photoplethysmogram (PPG) signals can be recorded non-invasively, research has been highly conducted to measure BP using PPG recently. In this paper, we propose a U-net deep learning architecture that uses fingertip PPG signal as input to estimate arterial BP (ABP) waveform non-invasively. From this waveform, we have also measured systolic BP (SBP), diastolic BP (DBP), and mean arterial pressure (MAP). The proposed method was evaluated on a subset of 100 subjects from two publicly available databases: MIMIC and MIMIC-III. The predicted ABP waveforms correlated highly with the reference waveforms and we have obtained an average Pearson’s correlation coefficient of 0.993. The mean absolute error is 3.68 ± 4.42 mmHg for SBP, 1.97 ± 2.92 mmHg for DBP, and 2.17 ± 3.06 mmHg for MAP which satisfy the requirements of the Association for the Advancement of Medical Instrumentation (AAMI) standard and obtain grade A according to the British Hypertension Society (BHS) standard. The results show that the proposed method is an efficient process to estimate ABP waveform directly using fingertip PPG.

scholarly journals A Continuous Blood Pressure Estimation Method Using Photoplethysmography by GRNN-Based Model

Sensors ◽  
2021 ◽  
Vol 21 (21) ◽  
pp. 7207
Author(s):  
Zheming Li ◽  
Wei He
Keyword(s):  
Blood Pressure ◽  
Estimation Method ◽  
Absolute Error ◽  
Disease Diagnosis ◽  
Generalized Regression Neural Network ◽  
British Hypertension Society ◽  
Proposed Model ◽  
The Mean ◽  
Blood Pressure Estimation ◽  
The Time Domain

Compared with diastolic blood pressure (DBP) and systolic blood pressure (SBP), the blood pressure (BP) waveform contains richer physiological information that can be used for disease diagnosis. However, most models based on photoplethysmogram (PPG) signals can only estimate SBP and DBP and are susceptible to noise signals. We focus on estimating the BP waveform rather than discrete BP values. We propose a model based on a generalized regression neural network to estimate the BP waveform, SBP and DBP. This model takes the raw PPG signal as input and BP waveform as output. The SBP and DBP are extracted from the estimated BP waveform. In addition, the model contains encoders and decoders, and their role is to be responsible for the conversion between the time domain and frequency domain of the waveform. The prediction results of our model show that the mean absolute error is 3.96 ± 5.36 mmHg for SBP and 2.39 ± 3.28 mmHg for DBP, the root mean square error is 5.54 for SBP and 3.45 for DBP. These results fulfill the Association for the Advancement of Medical Instrumentation (AAMI) standard and obtain grade A according to the British Hypertension Society (BHS) standard. The results show that the proposed model can effectively estimate the BP waveform only using the raw PPG signal.

scholarly journals Estimation of Motion and Respiratory Characteristics during the Meditation Practice Based on Video Analysis

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3771
Author(s):  
Alexey Kashevnik ◽  
Walaa Othman ◽  
Igor Ryabchikov ◽  
Nikolay Shilov
Keyword(s):  
Respiratory Rate ◽  
Evaluation System ◽  
Body Movement ◽  
Absolute Error ◽  
The Body ◽  
Meditation Practice ◽  
Body Parts ◽  
Mental Health Training ◽  
Negative Thoughts ◽  
The Mean

Meditation practice is mental health training. It helps people to reduce stress and suppress negative thoughts. In this paper, we propose a camera-based meditation evaluation system, that helps meditators to improve their performance. We rely on two main criteria to measure the focus: the breathing characteristics (respiratory rate, breathing rhythmicity and stability), and the body movement. We introduce a contactless sensor to measure the respiratory rate based on a smartphone camera by detecting the chest keypoint at each frame, using an optical flow based algorithm to calculate the displacement between frames, filtering and de-noising the chest movement signal, and calculating the number of real peaks in this signal. We also present an approach to detecting the movement of different body parts (head, thorax, shoulders, elbows, wrists, stomach and knees). We have collected a non-annotated dataset for meditation practice videos consists of ninety videos and the annotated dataset consists of eight videos. The non-annotated dataset was categorized into beginner and professional meditators and was used for the development of the algorithm and for tuning the parameters. The annotated dataset was used for evaluation and showed that human activity during meditation practice could be correctly estimated by the presented approach and that the mean absolute error for the respiratory rate is around 1.75 BPM, which can be considered tolerable for the meditation application.

scholarly journals Multi-Scene Building Height Estimation Method Based on Shadow in High Resolution Imagery

2021 ◽  
Vol 13 (15) ◽  
pp. 2862
Author(s):  
Yakun Xie ◽  
Dejun Feng ◽  
Sifan Xiong ◽  
Jun Zhu ◽  
Yangge Liu
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Estimation Method ◽  
Absolute Error ◽  
Large Error ◽  
Estimation Methods ◽  
Height Estimation ◽  
Building Height ◽  
Remote Sensing Imagery ◽  
High Resolution Imagery

Accurately building height estimation from remote sensing imagery is an important and challenging task. However, the existing shadow-based building height estimation methods have large errors due to the complex environment in remote sensing imagery. In this paper, we propose a multi-scene building height estimation method based on shadow in high resolution imagery. First, the shadow of building is classified and described by analyzing the features of building shadow in remote sensing imagery. Second, a variety of shadow-based building height estimation models is established in different scenes. In addition, a method of shadow regularization extraction is proposed, which can solve the problem of mutual adhesion shadows in dense building areas effectively. Finally, we propose a method for shadow length calculation combines with the fish net and the pauta criterion, which means that the large error caused by the complex shape of building shadow can be avoided. Multi-scene areas are selected for experimental analysis to prove the validity of our method. The experiment results show that the accuracy rate is as high as 96% within 2 m of absolute error of our method. In addition, we compared our proposed approach with the existing methods, and the results show that the absolute error of our method are reduced by 1.24 m-3.76 m, which can achieve high-precision estimation of building height.

scholarly journals Design and Implementation of Intelligent Inspection and Alarm Flight System for Epidemic Prevention

Drones ◽  
2021 ◽  
Vol 5 (3) ◽  
pp. 68
Author(s):  
Jiwei Fan ◽  
Xiaogang Yang ◽  
Ruitao Lu ◽  
Xueli Xie ◽  
Weipeng Li
Keyword(s):  
Deep Learning ◽  
Autonomous Navigation ◽  
Detection Method ◽  
Active Role ◽  
Absolute Error ◽  
Face Mask ◽  
Learning Technology ◽  
Flight System ◽  
Crowd Density ◽  
The Mean

Unmanned aerial vehicles (UAV) and related technologies have played an active role in the prevention and control of novel coronaviruses at home and abroad, especially in epidemic prevention, surveillance, and elimination. However, the existing UAVs have a single function, limited processing capacity, and poor interaction. To overcome these shortcomings, we designed an intelligent anti-epidemic patrol detection and warning flight system, which integrates UAV autonomous navigation, deep learning, intelligent voice, and other technologies. Based on the convolution neural network and deep learning technology, the system possesses a crowd density detection method and a face mask detection method, which can detect the position of dense crowds. Intelligent voice alarm technology was used to achieve an intelligent alarm system for abnormal situations, such as crowd-gathering areas and people without masks, and to carry out intelligent dissemination of epidemic prevention policies, which provides a powerful technical means for epidemic prevention and delaying their spread. To verify the superiority and feasibility of the system, high-precision online analysis was carried out for the crowd in the inspection area, and pedestrians’ faces were detected on the ground to identify whether they were wearing a mask. The experimental results show that the mean absolute error (MAE) of the crowd density detection was less than 8.4, and the mean average precision (mAP) of face mask detection was 61.42%. The system can provide convenient and accurate evaluation information for decision-makers and meets the requirements of real-time and accurate detection.

Explanation Plus Prediction—The Logical Focus of Project Management Research

2021 ◽  
pp. 875697282199994
Author(s):  
Joseph F. Hair ◽  
Marko Sarstedt
Keyword(s):  
Project Management ◽  
Statistical Models ◽  
Predictive Power ◽  
Mean Absolute Error ◽  
Explanatory Power ◽  
Absolute Error ◽  
Model Parameters ◽  
Mean Square ◽  
Management Research ◽  
The Mean

Most project management research focuses almost exclusively on explanatory analyses. Evaluation of the explanatory power of statistical models is generally based on F-type statistics and the R 2 metric, followed by an assessment of the model parameters (e.g., beta coefficients) in terms of their significance, size, and direction. However, these measures are not indicative of a model’s predictive power, which is central for deriving managerial recommendations. We recommend that project management researchers routinely use additional metrics, such as the mean absolute error or the root mean square error, to accurately quantify their statistical models’ predictive power.

scholarly journals A Multi-Channel Uncertainty-Aware Multi-Resolution Network for MR to CT Synthesis

2021 ◽  
Vol 11 (4) ◽  
pp. 1667
Author(s):  
Kerstin Klaser ◽  
Pedro Borges ◽  
Richard Shaw ◽  
Marta Ranzini ◽  
Marc Modat ◽  
...  
Keyword(s):  
Medical Image Analysis ◽  
Absolute Error ◽  
Magnetic Resonance Images ◽  
The Body ◽  
Whole Body ◽  
Image Size ◽  
Body Images ◽  
Image Translation ◽  
The Mean ◽  
Synthetic Ct

Synthesising computed tomography (CT) images from magnetic resonance images (MRI) plays an important role in the field of medical image analysis, both for quantification and diagnostic purposes. Convolutional neural networks (CNNs) have achieved state-of-the-art results in image-to-image translation for brain applications. However, synthesising whole-body images remains largely uncharted territory, involving many challenges, including large image size and limited field of view, complex spatial context, and anatomical differences between images acquired at different times. We propose the use of an uncertainty-aware multi-channel multi-resolution 3D cascade network specifically aiming for whole-body MR to CT synthesis. The Mean Absolute Error on the synthetic CT generated with the MultiResunc network (73.90 HU) is compared to multiple baseline CNNs like 3D U-Net (92.89 HU), HighRes3DNet (89.05 HU) and deep boosted regression (77.58 HU) and shows superior synthesis performance. We ultimately exploit the extrapolation properties of the MultiRes networks on sub-regions of the body.

Visualizing the Variance of a Random Variable

2011 ◽  
Vol 18 (01) ◽  
pp. 71-85
Author(s):  
Fabrizio Cacciafesta
Keyword(s):  
Stochastic Dominance ◽  
Mean Absolute Error ◽  
Random Variable ◽  
Absolute Error ◽  
Second Order ◽  
Taylor Formula ◽  
Order Stochastic Dominance ◽  
The Mean ◽  
Second Order Stochastic Dominance ◽  
Options Theory

We provide a simple way to visualize the variance and the mean absolute error of a random variable with finite mean. Some application to options theory and to second order stochastic dominance is given: we show, among other, that the "call-put parity" may be seen as a Taylor formula.

scholarly journals Day-Ahead Forecasting of Hourly Photovoltaic Power Based on Robust Multilayer Perception

2018 ◽  
Vol 10 (12) ◽  
pp. 4863 ◽  
Author(s):  
Chao Huang ◽  
Longpeng Cao ◽  
Nanxin Peng ◽  
Sijia Li ◽  
Jing Zhang ◽  
...  
Keyword(s):  
Power Plants ◽  
Mean Squared Error ◽  
Absolute Error ◽  
Multilayer Perception ◽  
Squared Error ◽  
The Mean ◽  
Effectiveness And Efficiency ◽  
Mlp Network ◽  
Grid Operation ◽  
Better Than

Photovoltaic (PV) modules convert renewable and sustainable solar energy into electricity. However, the uncertainty of PV power production brings challenges for the grid operation. To facilitate the management and scheduling of PV power plants, forecasting is an essential technique. In this paper, a robust multilayer perception (MLP) neural network was developed for day-ahead forecasting of hourly PV power. A generic MLP is usually trained by minimizing the mean squared loss. The mean squared error is sensitive to a few particularly large errors that can lead to a poor estimator. To tackle the problem, the pseudo-Huber loss function, which combines the best properties of squared loss and absolute loss, was adopted in this paper. The effectiveness and efficiency of the proposed method was verified by benchmarking against a generic MLP network with real PV data. Numerical experiments illustrated that the proposed method performed better than the generic MLP network in terms of root mean squared error (RMSE) and mean absolute error (MAE).

scholarly journals Direct Calculation of Thermodynamic Wet-Bulb Temperature as a Function of Pressure and Elevation

2013 ◽  
Vol 30 (8) ◽  
pp. 1757-1765 ◽  
Author(s):  
Sayed-Hossein Sadeghi ◽  
Troy R. Peters ◽  
Douglas R. Cobos ◽  
Henry W. Loescher ◽  
Colin S. Campbell
Keyword(s):  
Air Temperature ◽  
Mean Absolute Error ◽  
Direct Calculation ◽  
Ambient Air ◽  
Absolute Error ◽  
Mean Square ◽  
Air Temperatures ◽  
Order Polynomial ◽  
The Mean ◽  
Very High

Abstract A simple analytical method was developed for directly calculating the thermodynamic wet-bulb temperature from air temperature and the vapor pressure (or relative humidity) at elevations up to 4500 m above MSL was developed. This methodology was based on the fact that the wet-bulb temperature can be closely approximated by a second-order polynomial in both the positive and negative ranges in ambient air temperature. The method in this study builds upon this understanding and provides results for the negative range of air temperatures (−17° to 0°C), so that the maximum observed error in this area is equal to or smaller than −0.17°C. For temperatures ≥0°C, wet-bulb temperature accuracy was ±0.65°C, and larger errors corresponded to very high temperatures (Ta ≥ 39°C) and/or very high or low relative humidities (5% < RH < 10% or RH > 98%). The mean absolute error and the root-mean-square error were 0.15° and 0.2°C, respectively.

Sign in / Sign up

Export Citation Format

Share Document