scholarly journals Automatic Target Detection and Shooting System

2021 ◽  
Vol 9 (VII) ◽  
pp. 4023-4026
Author(s):  
Alan Paul A
Keyword(s):  
Target Detection ◽  
Modular Design ◽  
Low Cost ◽  
Cost Effective ◽  
Multiple Modes ◽  
Automatic Target Detection ◽  
The Past ◽  
Multi Mode

Our paper consists of the idea of improving target detection and shooting systems in an effective and low-cost manner. We have reviewed other systems in the past and come up with a multi-mode system that has multiple modes with its advantages and applications. Our system is much cost effective. We have used easy to get parts to function. it also has a modular design.

Performance evaluation of a low-cost odour trap installed in waterless urinals

2016 ◽  
Vol 6 (2) ◽  
pp. 252-258
Author(s):  
S. Ramesh Sakthivel ◽  
Md Azizurrahaman ◽  
V. Ganesh Prabhu ◽  
V. M. Chariar
Keyword(s):  
Low Cost ◽  
Flow Analysis ◽  
Cost Effective ◽  
Particle Flow ◽  
Ammonia Gas ◽  
Maintenance Costs ◽  
Gas Concentration ◽  
Adverse Conditions ◽  
The Past ◽  
Cost Effective Alternative

Waterless urinals save precious fresh water normally used for flushing and reduce odour levels in restrooms. However, existing models of waterless urinals available on the market are expensive and maintenance costs of the odour traps of these urinals are also quite high. Experiments conducted using a low cost membrane-based waterless-urinal odour prevention trap available in India revealed a reduction of over 90.5% in ammonia gas concentration in the urinals. The ammonia levels observed, in the range of 0.22 to 0.30 ppm in waterless urinals fitted with the odour trap evaluated in this study, is comparable to values reported for the widely used sealant liquid based waterless urinals in the past. No sign of clogging was observed in the clogging tests conducted. Passage of particles up to 4 mm in size in the particle flow analysis tests conducted is somewhat higher than the 2 mm reported for sealant liquid and membrane odour traps in previous studies, and it reveals that the odour trap can perform in adverse conditions without getting clogged. Economics of installation and maintenance aspects of waterless urinals carried out here show that the odour trap evaluated in this study can really be a cost effective alternative.

Autonomous underwater vehicle challenge: design and construction of a medium-sized, AI-enabled low-cost prototype

2021 ◽  
pp. 154851292110272
Author(s):  
Dimitrios Paraschos ◽  
Nikolaos K. Papadakis
Keyword(s):  
Machine Learning ◽  
System Integration ◽  
Modular Design ◽  
Autonomous Underwater Vehicle ◽  
Low Cost ◽  
Cost Effective ◽  
Underwater Vehicle ◽  
Stability Control ◽  
Operational Environment ◽  
Image Capturing

The design of an autonomous underwater vehicle (AUV) with physical dimensions of 1100 mm × 700 mm × 330 mm, and weight of 55 kg, is introduced herein. This paper describes the design, materials, hydrodynamics, and system architecture of an AUV prototype named Synoris, developed as a low-cost and medium-scale testbed platform. Synoris moves via six brushless motors, can reach up to 200 m depth, has an autonomy estimated around 6 hours and a modular design for multiple payload options. Stability control, autonomous movement, obstacle avoidance temperature/pressure sensing, and video/image capturing are simultaneously performed by exploiting a set of onboard computers that are described briefly in Section 4. The whole platform is built on top of the open source software called ROS (robotic operating system) that provides a flexible framework for writing robot software by providing services such as low-level device control, message parsing, data fusion, and system integration. Synoris is ideal for underwater applications and missions, involving machine learning and computer vision features. AUV development in general meets high-cost solutions due to the complexity and harshness of the operational environment. Even the most cost-effective solutions demand plentiful resources. This paper describes the entire process of development and how a relatively low-cost approach can provide a reliable AUV for many underwater applications, involving AI and machine-learning capabilities.

scholarly journals Nanofabrication route to achieve sustainable production of next generation defect-free graphene: analysis and characterisation

2021 ◽  
Vol 6 (1) ◽  
pp. 36-43
Author(s):  
Shikhar Misra ◽  
Nirmal Kumar Katiyar ◽  
Arvind Kumar ◽  
Saurav Goel ◽  
Krishanu Biswas
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
High Yield ◽  
Technical Challenge ◽  
The Past ◽  
Free Graphene ◽  
Subtractive Manufacturing ◽  
Graphene Production ◽  
Manufacturing Techniques ◽  
Domestic Appliance

Abstract In the past two decades, graphene has been one of the most studied materials due to its exceptional properties. The scalable route to cost-effective manufacture defect-free graphene has continued to remain a technical challenge. Intrinsically defect-free graphene changes its properties dramatically, and it is a challenging task to control the defects in graphene production using scaled-down subtractive manufacturing techniques. In this work, the exfoliation of graphite was investigated as a sustainable low-cost graphene manufacturing technique. The study made use of a simple domestic appliance e.g., a kitchen blender to churn graphene in wet conditions by mixing with N-Methyl-2-pyrrolidone (NMP). It was found that the centrifugal force-induced turbulent flow caused by the rotating blades exfoliates graphite flakes to form graphene. The technique is endowed with a high yield of defect-free graphene (0.3 g/h) and was deemed suitable to remove 10% fluoride content from the water and color absorption from fizzy drinks.

scholarly journals Development of a mobile, cost-effective and easy to use inertial motion capture system for monitoring in rehabilitation applications

2021 ◽  
Vol 7 (2) ◽  
pp. 586-589
Author(s):  
Nana Schlage ◽  
Andreas Kitzig ◽  
Gudrun Stockmanns ◽  
Edwin Naroska
Keyword(s):  
Motion Capture ◽  
Modular Design ◽  
Low Cost ◽  
Cost Effective ◽  
Human Motion ◽  
Body Region ◽  
Measurement Results ◽  
Before And After ◽  
Good Measurement ◽  
L Systems

Abstract Many people are familiar with the feeling of instability, pain, or subsidence in the knee joint after a knee injury. There are many different methods for examining the knee, such as the drawer test or the Lachman test [1], before and after surgery. While these tests can be used in short term and provide useful results, motion capture systems can be used as an alternative measurement method, almost as a substitute in longer term. These include marker-based or mechanica l systems, which achieve good measurement results but are expensive and inflexible. For this reason, this paper presents a mobile, easy-to-use motion and easy expandable capture system using a low-cost IMU-based development system. The modular design of the system allows it to be adapted to each body region with simple adjustments. However, the present work focuses on applications for capturing human motion sequences and deriving three joint angles of the lower extremities to detect malposition.

ASSESSMENT OF THE PLATELET COUNT IN THE PREGNANT WOMEN IN IGIMS, PATNA, BIHAR

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Tanwi Singh ◽  
Anshuman Sinha
Keyword(s):  
Platelet Count ◽  
Pregnant Women ◽  
Screening Test ◽  
Low Cost ◽  
Medical Science ◽  
Cost Effective ◽  
Platelet Indices ◽  
Increased Risk ◽  
Low Platelet Count ◽  
Severity Of The Disease

The major risk associated with low platelet count in pregnancy is the increased risk of bleeding during the childbirth or post that. There is an increased blood supply to the uterus during pregnancy and the surgical procedure requires cutting of major blood vessels. Women with thrombocytopenia are at increased risk of losing excessive blood. The risk is more in case of caesarean delivery as compared to vaginal delivery. Hence based on above findings the present study was planned for Assessment of the Platelet Count in the Pregnant Women in IGIMS, Patna, Bihar. The present study was planned in Department of Pathology, Indira Gandhi Institute of Medical Science, Patna, Bihar, India. The present study was planned from duration of January 2019 to June 2019. In the present study 200 pregnant females samples received for the platelet estimation were enrolled in the present study. Clinically platelet indices can be a useful screening test for early identification of preeclampsia and eclampsia. Also platelet indices can assess the prognosis of this disease in pregnant women and can be used as an effective prognostic marker because it correlates with severity of the disease. Platelet count is a simple, low cost, and rapid routine screening test. Hence the data generated from the present study concludes that platelet count can be used as a simple and cost effective tool to monitor the progression of preeclampsia, thereby preventing complications to develop during the gestational period. Keywords: Platelet Count, Pregnant Women, IGIMS, Patna, Bihar, etc.

Regulatory and sustainability initiatives lead to improved polyaminopolyamide epichlorohydrin (PAE) wet-strength resins and paper products

TAPPI Journal ◽  
2018 ◽  
Vol 17 (09) ◽  
pp. 519-532 ◽  
Author(s):  
Mark Crisp ◽  
Richard Riehle
Keyword(s):  
Health And Safety ◽  
Cost Effective ◽  
Worker Safety ◽  
Regulatory Requirements ◽  
Wet Strength ◽  
The Past ◽  
Consumer Safety ◽  
Federal Institute ◽  
Sustainability Initiatives ◽  
The Impact

Polyaminopolyamide-epichlorohydrin (PAE) resins are the predominant commercial products used to manufacture wet-strengthened paper products for grades requiring wet-strength permanence. Since their development in the late 1950s, the first generation (G1) resins have proven to be one of the most cost-effective technologies available to provide wet strength to paper. Throughout the past three decades, regulatory directives and sustainability initiatives from various organizations have driven the development of cleaner and safer PAE resins and paper products. Early efforts in this area focused on improving worker safety and reducing the impact of PAE resins on the environment. These efforts led to the development of resins containing significantly reduced levels of 1,3-dichloro-2-propanol (1,3-DCP) and 3-monochloropropane-1,2-diol (3-MCPD), potentially carcinogenic byproducts formed during the manufacturing process of PAE resins. As the levels of these byproducts decreased, the environmental, health, and safety (EH&S) profile of PAE resins and paper products improved. Recent initiatives from major retailers are focusing on product ingredient transparency and quality, thus encouraging the development of safer product formulations while maintaining performance. PAE resin research over the past 20 years has been directed toward regulatory requirements to improve consumer safety and minimize exposure to potentially carcinogenic materials found in various paper products. One of the best known regulatory requirements is the recommendations of the German Federal Institute for Risk Assessment (BfR), which defines the levels of 1,3-DCP and 3-MCPD that can be extracted by water from various food contact grades of paper. These criteria led to the development of third generation (G3) products that contain very low levels of 1,3-DCP (typically <10 parts per million in the as-received/delivered resin). This paper outlines the PAE resin chemical contributors to adsorbable organic halogens and 3-MCPD in paper and provides recommendations for the use of each PAE resin product generation (G1, G1.5, G2, G2.5, and G3).

Cross-culture outcomes of a brazilian professor Fulbright in the USA

2017 ◽  
Vol 26 (50) ◽  
pp. 115
Author(s):  
Marcelo Da Silva Leite ◽  
Celeste Gaia
Keyword(s):  
Higher Education ◽  
Low Cost ◽  
Cross Culture ◽  
College And University ◽  
Governmental Agencies ◽  
The Past ◽  
University Curriculum ◽  
Fulbright Scholar ◽  
The Usa ◽  
Higher Education Costs

Over the past decade due the expansion of globalization there has been an increasing emphasis on internationalization among faculty, administration and accrediting agencies in the Higher Education.  Although to promote internationalization in the Higher Education, costs are a big challenge, one way to have the international actions with low cost, it is seeking for grants from different governmental agencies and foundations.The Fulbright Scholar program provides a long-standing and externally-funded means for internationalizing college and university curriculum. This article is going to share the perspective   of a Brazilian Fulbright Scholar at an American college and the institution perspective of the Fulbright scholar participation at the College.

Janus – A New Approach to Air Combat Pilot Training

2019 ◽  
Vol 2019 (4) ◽  
pp. 7-22
Author(s):  
Georges Bridel ◽  
Zdobyslaw Goraj ◽  
Lukasz Kiszkowiak ◽  
Jean-Georges Brévot ◽  
Jean-Pierre Devaux ◽  
...  
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
High Energy ◽  
Training System ◽  
Embedded Sensors ◽  
Pilot Training ◽  
New Approach ◽  
Combat Aircraft ◽  
Air Combat ◽  
The Cost

Abstract Advanced jet training still relies on old concepts and solutions that are no longer efficient when considering the current and forthcoming changes in air combat. The cost of those old solutions to develop and maintain combat pilot skills are important, adding even more constraints to the training limitations. The requirement of having a trainer aircraft able to perform also light combat aircraft operational mission is adding unnecessary complexity and cost without any real operational advantages to air combat mission training. Thanks to emerging technologies, the JANUS project will study the feasibility of a brand-new concept of agile manoeuvrable training aircraft and an integrated training system, able to provide a live, virtual and constructive environment. The JANUS concept is based on a lightweight, low-cost, high energy aircraft associated to a ground based Integrated Training System providing simulated and emulated signals, simulated and real opponents, combined with real-time feedback on pilot’s physiological characteristics: traditionally embedded sensors are replaced with emulated signals, simulated opponents are proposed to the pilot, enabling out of sight engagement. JANUS is also providing new cost effective and more realistic solutions for “Red air aircraft” missions, organised in so-called “Aggressor Squadrons”.

An Assessment of a Low-Cost Wastewater Disposal System after Twenty-Five Years of Operation

1987 ◽  
Vol 19 (5-6) ◽  
pp. 701-710 ◽  
Author(s):  
B. L. Reidy ◽  
G. W. Samson
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Wastewater Disposal ◽  
Industrial Base ◽  
Industrial Wastewaters ◽  
The Past ◽  
Gasification Process ◽  
Appropriate Treatment ◽  
Environmentally Safe ◽  
Coal Resource

A low-cost wastewater disposal system was commissioned in 1959 to treat domestic and industrial wastewaters generated in the Latrobe River valley in the province of Gippsland, within the State of Victoria, Australia (Figure 1). The Latrobe Valley is the centre for large-scale generation of electricity and for the production of pulp and paper. In addition other industries have utilized the brown coal resource of the region e.g. gasification process and char production. Consequently, industrial wastewaters have been dominant in the disposal system for the past twenty-five years. The mixed industrial-domestic wastewaters were to be transported some eighty kilometres to be treated and disposed of by irrigation to land. Several important lessons have been learnt during twenty-five years of operating this system. Firstly the composition of the mixed waste stream has varied significantly with the passage of time and the development of the industrial base in the Valley, so that what was appropriate treatment in 1959 is not necessarily acceptable in 1985. Secondly the magnitude of adverse environmental impacts engendered by this low-cost disposal procedure was not imagined when the proposal was implemented. As a consequence, clean-up procedures which could remedy the adverse effects of twenty-five years of impact are likely to be costly. The question then may be asked - when the total costs including rehabilitation are considered, is there really a low-cost solution for environmentally safe disposal of complex wastewater streams?

Motivating Compliance: Firm Response to Mandatory Disclosure Policies

2018 ◽  
Vol 32 (2) ◽  
pp. 103-119
Author(s):  
Colleen M. Boland ◽  
Chris E. Hogan ◽  
Marilyn F. Johnson
Keyword(s):  
Conflict Of Interest ◽  
Low Cost ◽  
Cost Effective ◽  
Data Availability ◽  
Policy Adoption ◽  
Future Research ◽  
Regulated Firms ◽  
Firm Response ◽  
Disclosure Rules ◽  
The Impact

SYNOPSIS Mandatory existence disclosure rules require an organization to disclose a policy's existence, but not its content. We examine policy adoption frequencies in the year immediately after the IRS required mandatory existence disclosure by nonprofits of various governance policies. We also examine adoption frequencies in the year of the subsequent change from mandatory existence disclosure to a disclose-and-explain regime that required supplemental disclosures about the content and implementation of conflict of interest policies. Our results suggest that in areas where there is unclear regulatory authority, mandatory existence disclosure is an effective and low cost regulatory device for encouraging the adoption of policies desired by regulators, provided those policies are cost-effective for regulated firms to implement. In addition, we find that disclose-and-explain regulatory regimes provide stronger incentives for policy adoption than do mandatory existence disclosure regimes and also discourage “check the box” behavior. Future research should examine the impact of mandatory existence disclosure rules in the year that the regulation is implemented. Data Availability: Data are available from sources cited in the text.

Sign in / Sign up

Export Citation Format

Share Document