scholarly journals Adsorpsi Methylene Blue pada Nanopartikel Magnetit tersalut Asam Humat: Kajian Isoterm dan Kinetika

2021 ◽  
Vol 4 (1) ◽  
pp. 51
Author(s):  
Ngatijo Ngatijo ◽  
Nurul Gusmaini ◽  
Restina Bemis ◽  
Rahmat Basuki
Keyword(s):  
Methylene Blue ◽  
Ph Optimum ◽  
Ft Ir

<p>Nanopartikel magnetit merupakan suatu material dengan sifat magnet yang stabil dan memiliki luas permukaan tinggi. Penyalutan nanopartikel magnetit dengan asam humat (AH) dilaporkan dapat meningkatkan stabilitas, kapasitas adsorpsi, dan kemudahan pemisahan pasca adsorpsi. Penelitian ini bertujuan untuk melakukan sintesis Nanopartikel Magnetit tersalut Asam Humat (NpMAH) dengan metode ko-presipitasi dan menentukan parameter adsorpsinya sebagai adsorben <em>Methylene Blue</em> (MB) dengan metode <em>batch</em>. Keberhasilan sintesis ditunjukkan oleh karakterisasi NpMAH dengan FT-IR, XRD, SEM, dan VSM. Parameter isoterm adsorpsi mengindikasikan bahwa adsorpsi terjadi secara lapis tunggal dengan kapasitas adsorpsi sebesar 56,96 mg/g dan energi adsorpsi sebesar 26,31 kJ/mol pada pH optimum 6,0. Parameter kinetika menunjukkan bahwa adsorpsi mengikuti model kinetika Ho (<em>pseudo</em> orde kedua) dengan konstanta laju adsorpsi (<em>k<sub>Ho</sub></em>) sebesar 12688,71 g/molmenitdan perhitungan MB yang teradsorpsi pada kesetimbangan (<em>q<sub>e</sub></em>) sebesar 2,96×10<sup>-5</sup> mol/g. Perhitungan energi adsorpsi menggunakan model kinetika Santosa dan RBS berturut-turut 25,67 kJ/mol dan 41,25 kJ/mol.</p>

scholarly journals Straightforward Synthesis of Mn3O4/ZnO/Eu2O3-Based Ternary Heterostructure Nano-Photocatalyst and Its Application for the Photodegradation of Methyl Orange and Methylene Blue Dyes

Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4661
Author(s):  
Jayachamarajapura Pranesh Shubha ◽  
Haralahalli Shivappa Savitha ◽  
Syed Farooq Adil ◽  
Mujeeb Khan ◽  
Mohammad Rafe Hatshan ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Methyl Orange ◽  
Irradiation Time ◽  
Solar Irradiation ◽  
Anionic Dyes ◽  
One Pot ◽  
Sunlight Irradiation ◽  
Ft Ir ◽  
Degradation Activity ◽  
Ecological Applications

Zinc oxide-ternary heterostructure Mn3O4/ZnO/Eu2O3 nanocomposites were successfully prepared via waste curd as fuel by a facile one-pot combustion procedure. The fabricated heterostructures were characterized utilizing XRD, UV–Visible, FT-IR, FE-SEM, HRTEM and EDX analysis. The photocatalytic degradation efficacy of the synthesized ternary nanocomposite was evaluated utilizing model organic pollutants of methylene blue (MB) and methyl orange (MO) in water as examples of cationic dyes and anionic dyes, respectively, under natural solar irradiation. The effect of various experimental factors, viz. the effect of a light source, catalyst dosage, irradiation time, pH of dye solution and dye concentration on the photodegradation activity, was systematically studied. The ternary Mn3O4/ZnO/Eu2O3 photocatalyst exhibited excellent MB and MO degradation activity of 98% and 96%, respectively, at 150 min under natural sunlight irradiation. Experiments further conclude that the fabricated nanocomposite exhibits pH-dependent photocatalytic efficacy, and for best results, concentrations of dye and catalysts have to be maintained in a specific range. The prepared photocatalysts are exemplary and could be employed for wastewater handling and several ecological applications.

scholarly journals Synthesis of Magnetic Ferrocene-Containing Polymer with Photothermal Effects for Rapid Degradation of Methylene Blue

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 558
Author(s):  
Wenhui Zhu ◽  
Caiyun Zhang ◽  
Yali Chen ◽  
Qiliang Deng
Keyword(s):  
Methylene Blue ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Degradation Rate ◽  
Model Compound ◽  
Vibrating Sample Magnetometer ◽  
Simulated Sunlight ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir

Photothermal materials are attracting more and more attention. In this research, we synthesized a ferrocene-containing polymer with magnetism and photothermal properties. The resulting polymer was characterized by Fourier-transform infrared (FT-IR), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Its photo-thermocatalytic activity was investigated by choosing methylene blue (MB) as a model compound. The degradation percent of MB under an irradiated 808 nm laser reaches 99.5% within 15 min, and the degradation rate is 0.5517 min−1, which is 145 times more than that of room temperature degradation. Under irradiation with simulated sunlight, the degradation rate is 0.0092 min−1, which is approximately 2.5 times more than that of room temperature degradation. The present study may open up a feasible route to degrade organic pollutants.

scholarly journals Removal of Methylene Blue and Congo Red Using Adsorptive Membrane Impregnated with Dried Ulva fasciata and Sargassum dentifolium

Plants ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 384
Author(s):  
Ahmed Labena ◽  
Ahmed E. Abdelhamid ◽  
Abeer S. Amin ◽  
Shimaa Husien ◽  
Liqaa Hamid ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Removal Efficiency ◽  
Congo Red ◽  
Dye Removal ◽  
Industrial Effluents ◽  
Composite Membranes ◽  
Acrylic Fiber ◽  
Ulva Fasciata ◽  
Ft Ir ◽  
Sorption Time

Biosorption is a bioremediation approach for the removal of harmful dyes from industrial effluents using biological materials. This study investigated Methylene blue (M. blue) and Congo red (C. red) biosorption from model aqueous solutions by two marine macro-algae, Ulva fasciata and Sargassum dentifolium, incorporated within acrylic fiber waste to form composite membranes, Acrylic fiber-U. fasciata (AF-U) and Acrylic fiber-S. dentifolium (AF-S), respectively. The adsorption process was designed to more easily achieve the 3R process, i.e., removal, recovery, and reuse. The process of optimization was implemented through one factor at a time (OFAT) experiments, followed by a factorial design experiment to achieve the highest dye removal efficiency. Furthermore, isotherm and kinetics studies were undertaken to determine the reaction nature. FT-IR and SEM analyses were performed to investigate the properties of the membrane. The AF-U membrane showed a significant dye removal efficiency, of 88.9% for 100 ppm M. blue conc. and 79.6% for 50 ppm C. red conc. after 240 min sorption time. AF-S recorded a sorption capacity of 82.1% for 100 ppm M. blue conc. after 30 min sorption time and 85% for 100 ppm C. red conc. after 240 min contact time. The membranes were successfully applied in the 3Rs process, in which it was found that the membranes could be used for five cycles of the removal process with stable efficiency.

scholarly journals Zirconium-Doped Chromium IV Oxide Nanocomposites: Synthesis, Characterization, and Photocatalysis towards the Degradation of Organic Dyes

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 117
Author(s):  
Zahir Muhammad ◽  
Farman Ali ◽  
Muhammad Sajjad ◽  
Nisar Ali ◽  
Muhammad Bilal ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Solid State ◽  
Room Temperature ◽  
Organic Dyes ◽  
Uv Light ◽  
Heterogeneous Photocatalysis ◽  
Ft Ir ◽  
Complete Mineralization

Degradation of organic dyes and their byproducts by heterogeneous photocatalysts is an essential process, as these dyes can be potentially discharged in wastewater and threaten aquatic and xerophyte life. Therefore, their complete mineralization into nontoxic components (water and salt) is necessary through the process of heterogeneous photocatalysis. In this study, Zr/CrO2 (Zirconium-doped chromium IV oxide) nanocomposite-based photocatalysts with different compositions (1, 3, 5, 7 & 9 wt.%) were prepared by an environmentally friendly, solid-state reaction at room temperature. The as-prepared samples were calcined under air at 450 °C in a furnace for a specific period of time. The synthesis of Zr/CrO2 photocatalysts was confirmed by various techniques, including XRD, SEM, EDX, FT-IR, UV-Vis, and BET. The photocatalytic properties of all samples were tested towards the degradation of methylene blue and methyl orange organic dyes under UV light. The results revealed a concentration-dependent photocatalytic activity of photocatalysts, which increased the amount of dopant (up to 5 wt.%). However, the degradation efficiency of the catalysts decreased upon further increasing the amount of dopant due to the recombination of holes and photoexcited electrons.

Temperature Dependent On Activated Carbon For Their Biological Activity And Photocatalytical Degradation of Methylene Blue: A Novel Approach To Green Synthesis

2021 ◽  
Author(s):  
Amalanathan.M ◽  
Aravind.M ◽  
Sony Michael Mary.M ◽  
Razan A. Alshgari ◽  
Asma A. Alothman ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Antibacterial Activity ◽  
Activated Carbon ◽  
Hydrothermal Carbonization ◽  
Microbial Pathogens ◽  
X Ray Diffraction ◽  
E Coli ◽  
Novel Approach ◽  
Transmission Electron ◽  
Ft Ir

Abstract In this work, jasmine flower derived activated carbon were successfully synthesized by hydrothermal carbonization process at the different annealing temperature. The Crystallinity, phase, structural, morphological and optical properties of activated carbon were investigated using X-ray diffraction (XRD), Fourier Transform Infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), Transmission electron microscope (TEM), and UV-visible spectroscopy analysis. The graphitic phase of carbon was obtained from the XRD pattern. Surface morphology reveals irregular-shaped nanoparticles. The photodegradation of methylene blue (MB) was carried out under the visible light irradiation technique to study its photocatalytic activity. The activated carbon obtained at 400oC, 500oC and 600oC shows a photocatalytic degradation efficiency of 86%, 90%, and 94%, respectively. Antibacterial activity of activated carbon was examined against S. Aureus (MTCC-737) and E-Coli (MTCC- 443) microbial pathogens, and their potent antibacterial activity was examined from the zone of inhibition layer.

Co-modification of a lignocellulosic biomass by maleic anhydride and ferric hydroxide for high-efficient biosorption of methylene blue

2021 ◽  
Author(s):  
Youcheng Gao ◽  
Jun Zeng ◽  
Siming Zhu ◽  
Qiang Liu
Keyword(s):  
Methylene Blue ◽  
Maleic Anhydride ◽  
Sugar Beet ◽  
Lignocellulosic Biomass ◽  
Ferric Hydroxide ◽  
Sugar Beet Pulp ◽  
Microwave Assisted ◽  
High Efficient ◽  
Beet Pulp ◽  
Ft Ir

Herein, a novel biosorbent originated from sugar beet pulp (SBP) was synthesized by microwave-assisted esterification with maleic anhydride (MA) and further decoration with ferric hydroxide. Characterized methods including FT-IR, SEM,...

Synthesis of Adsorbent from Bagasse for Methylene Blue Adsorption

2021 ◽  
Vol 7 (2) ◽  
pp. 188-195
Author(s):  
Nurhasni Nurhasni ◽  
Sariana Harahap ◽  
Ahmad Fathoni ◽  
Hendrawati Hendrawati
Keyword(s):  
Methylene Blue ◽  
Textile Industry ◽  
Contact Time ◽  
Ph Effect ◽  
Blue Dye ◽  
Methylene Blue Dye ◽  
Batch Method ◽  
Homogeneous Surface ◽  
Dyeing Process ◽  
Ft Ir

The ability of bagasse adsorbents to adsorb methylene blue without activation using 0.5 M H2SO4 solution was examined. Methylene blue is widely used in the textile industry because it produces bright colors, and the dyeing process is fast and easy. This research aims to determine the optimum adsorption conditions, namely the variations in contact time, dye concentration, adsorbent mass, and pH effect on methylene blue, which were carried out using the batch method. Furthermore, the adsorbents were characterized by FT-IR and SEM. The optimum state of the bagasse adsorbent to adsorb methylene blue dye has a mass of 0.5 grams, a contact time of 30 minutes, a concentration of 50 ppm, and a pH of 5. The character of the adsorbent after activation with H2SO4 was better than without activation. The highest adsorption efficiency of methylene blue dye in the batch method was 99.67%. The FTIR spectrum of the bagasse adsorbent showed OH, C-H, C=O, C=C, and C-O functional groups. The adsorption isotherm model for methylene blue dye follows the Langmuir isotherm since the graph obtained is linear with the correlation coefficient (R2) = 1, where the adsorbent has a homogeneous surface.

scholarly journals Synthesis of a high-surface area V2O5/TiO2–SiO2 catalyst and its application in the visible light photocatalytic degradation of methylene blue

RSC Advances ◽  
2019 ◽  
Vol 9 (42) ◽  
pp. 24368-24376 ◽  
Author(s):  
Ajay Kumar Adepu ◽  
Srinath Goskula ◽  
Suman Chirra ◽  
Suresh Siliveri ◽  
Sripal Reddy Gujjula ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Visible Light ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Bet Surface Area ◽  
Titanium Silicate ◽  
Ft Ir ◽  
Synthesized Materials ◽  
Visible Light Photocatalytic

In the present study, we synthesized several high-surface area V2O5/TiO2–SiO2 catalysts (vanado titanium silicate, VTS). The synthesized materials are characterized by PXRD, FE-SEM/EDAX, TEM, BET-surface area, FT-IR, UV-Vis, XPS, fluorescence and photocatalytic studies.

scholarly journals Preparation and Adsorption Properties of Biochar/g-C3N4 Composites for Methylene Blue in Aqueous Solution

2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Xiaodong Li
Keyword(s):  
Methylene Blue ◽  
Thermodynamic Parameters ◽  
Raw Materials ◽  
Order Kinetic ◽  
Adsorption Effect ◽  
Freundlich Model ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Doping Ratio

Using straw and urea as raw materials, biochar (BC) and g-C3N4 were prepared by oxygen-free pyrolysis at 300°C and 550°C. BC/g-C3N4 was prepared by loading different amounts of g-C3N4 onto the surface of biochar and characterized by SEM and FT-IR. The adsorption effect on methylene blue (MB) was investigated from the aspects of dosage and pH. The studies of adsorption equilibrium isotherms and the kinetic and the thermodynamic parameters on the BC/g-C3N4 adsorbents are discussed. The results showed that BC/g-C3N4 0.16 g/L with a doping ratio of 1 : 3 was added to the MB solution with an initial concentration of 50 mg/L and pH=11. The adsorption rate and adsorption amount were 96.72% and 302.25 mg/g, respectively. The adsorption process included surface adsorption and intraparticle diffusion, which conformed to the pseudo-second-order kinetic model and Langmuir-Freundlich model. Thermodynamic parameters (ΔG0<0, ΔH0>0, and ΔS0>0) showed that the adsorption reaction is spontaneous, which positively correlated with temperature.

scholarly journals Fabrication of TiO2@Yeast-Carbon Hybrid Composites with the Raspberry-Like Structure and Their Synergistic Adsorption-Photocatalysis Performance

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Dang Yu ◽  
Bai Bo ◽  
He Yunhua
Keyword(s):  
Methylene Blue ◽  
Hybrid Composites ◽  
Light Response ◽  
X Ray Diffraction ◽  
Uniform Size ◽  
Fourier Transformed Infrared Spectroscopy ◽  
Wide Range ◽  
Excellent Photocatalytic Activity ◽  
Ft Ir ◽  
Enhanced Adsorption

In the present work, we report the preparation and photocatalytic properties of TiO2@yeast-carbon with raspberry-like structure using a pyrolysis method. The products are characterized by field emission scanning electron microscopy (FE-SEM), energy dispersive spectrometry (EDS), X-ray diffraction (XRD), thermal gravimetric and differential thermal analysis (TGA-DTA), Fourier transformed infrared spectroscopy (FT-IR), and ultraviolet visible spectroscopy (UV-VIS), respectively. The results show that the hybrid TiO2@yeast-carbon microspheres have ordered elliptic shapes of uniform size (length = 3.5±0.3 μm; width = 2.5±0.5 μm). UV-VIS ascertains that the as-prepared microspheres possess an obvious light response in a wide range of 250–400 nm. In the decomposition of typical model pollutants including methylene blue and congo red, the hybrid composites exhibited excellent photocatalytic activity for the methylene blue due to the enhanced adsorption ability. Further investigation reveals that the combined effect of adsorption from the yeast-carbon core and photocatalytic degradation from the attached TiO2nanoparticles were responsible for the improvement of the photocatalytic activities. Hereby, the raspberry-like TiO2@yeast-carbon has promising applications in water purification.

Sign in / Sign up

Export Citation Format

Share Document