scholarly journals ANALISIS PROSES PACKAGING DAN STUFFING PERUSAHAAN FURNITUR LOKAL DALAM MENJAGA EKSISTENSI PERSAINGAN GLOBAL (STUDI KASUS: UD SURYA ABADI FURNITURE, SUKOHARJO, JAWA TENGAH)

2018 ◽  
Vol 2 (2) ◽  
pp. 159-167
Author(s):  
Yogi Pasca Pratama ◽  
Dicky Afisena ◽  
Bambang Sarosa
Keyword(s):  
Supply Chain ◽  
Raw Materials ◽  
Descriptive Study ◽  
Influential Factors ◽  
Furniture Industry ◽  
Industry Sector ◽  
High Labor ◽  
Central Java ◽  
Manual Counting ◽  
Materials Used

Indonesia has great potential in developing the furniture industry sector. The abundance of raw materials and high labor numbers should be optimized to encourage the furniture industry in Indonesia in the international furniture trade. However, in reality, the Indonesian furniture industry has increasingly been eliminated in the arena of international furniture trade. Therefore, it is necessary to consider how the furniture industry actually manages the company. One of the influential factors in furniture exports is how to manage the supply chain or logistics of the furniture industry, where one of them is related to the process of packaging and stuffing of furniture products. As a representation, this study tries to describe how the packaging and stuffing process is carried out by UD Surya Abadi Furniture, one of the furniture industries located in Sukoharjo Regency, Central Java. This research is a descriptive study, where data is collected by observation, interview, and documentation techniques. The results of this study discuss the packaging procedures, materials used and feasibility tests, and how the procedures and benefits obtained from the stuffing process at UD Surya Abadi Furniture. The conclusion obtained is that the description of the packaging and stuffing process that is carried out is quite good with the use of materials that meet the standards. Nevertheless, the process of packaging and stuffing at UD Surya Abadi Furniture is still done with manual counting so that it is not optimal.

scholarly journals A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

2012 ◽  
Vol 1 (2) ◽  
Author(s):  
Muh. Hisjam Adi Djoko Guritno And Shalihuddin Djalal Tandjung
Keyword(s):  
Supply Chain ◽  
Production Capacity ◽  
Chain Model ◽  
Furniture Industry ◽  
Sustainable Supply Chain ◽  
Industry Sector ◽  
Central Java ◽  
Supply Chain Model ◽  
Teak Wood ◽  
Wooden Furniture

Wooden furniture industry is an important industry sector in Indonesia, because many people’s welfare relyon this industry sector and the industry has a big social and environmental impacts. Many wooden furnitureindustries in Indonesia, especially in Central Java Province face problems related to the sustainability. The relationbetween wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM) model is proposed as an approach for solutions for the problems. The approach is chosen due to the characteristics of the problems that related to economic, social, and environmental problems. This aim of this paper is to determine how much supply teak wood must be provided by PP to satisfy furniture industry demand, how much production capacity that must be increased and how large forest area that must be planted in order to achieve environmental and social goals without sacrificing economical goals much. Goal programming (GP) is chosen for solving the problems, because the goals are to maximize the total benefit,minimize the total loss and anticipate the conflicts between goals. Numerical trial based on observation in teak wooden furniture industry in Central Java was used to illustrate our findings. Using pareto efficient principle, the model can satisfy all goals that need to be achieved. Numerical results can be used by decision makers in teak wood industry to analyze the trade-off among several set of alternative solutions.

scholarly journals SUPPLY CHAIN ANALYSIS OF SOYBEAN RAW MATERIALS ON TOFU BUSINESS GROUP AT MEROBOK CENTRAL LOMBOK

2021 ◽  
Vol 10 (1) ◽  
pp. 41
Author(s):  
Zainal Abidin
Keyword(s):  
Supply Chain ◽  
Raw Materials ◽  
Descriptive Study ◽  
Business Group ◽  
Qualitative Approach ◽  
Raw Material ◽  
Chain Analysis ◽  
Depth Interview ◽  
Supply Chain Analysis ◽  
Chain Problem

This research is motivated by the problem of raw material shortages that experienced by Tofu business group at Merobok. The research aims are to find out the mapping and to identifiy supply chain problem of soybean raw materials on Tofu business group at Merobok Central Lombok. Type of this research is descriptive study with qualitative approach. Data collecting technique was used in-depth interview, direct observation, and documentation. Then performed qualitative analysis by using Triangulation procedure. As for  the results of this research concluded that Tofu business group apply Few Supplier strategy that is choose three supplier consisting of Ingin Maju farmers (ten persons of farmers), H. Abidi as a merchant, and Mr. Sahlan as a collector at Gemel village. However, Tofu business group more intensive to purchase raw materials from Mr. Sahlan (collector). Tofu business group including of weak buyers of soybean raw materials because unable to dominate supplier and Tofu business group has less purchasing power than other buyers and unable to search other suppliers because they have less available capital Keywords:Supply Chain, Tofu Business Group, Soybean Raw Materials, Mapping, and Supplier

SIFAT MEKANIK PAPAN GYPSUM DARI SERBUK LIMBAH KAYU NON KOMERSIAL

2014 ◽  
Vol 6 (2) ◽  
pp. 1
Author(s):  
Saibatul Hamdi
Keyword(s):  
Raw Materials ◽  
Wood Particle ◽  
Quality Standards ◽  
Gypsum Board ◽  
Average Value ◽  
Wood Particles ◽  
Sawn Timber ◽  
Materials Used ◽  
Artocarpus Elasticus ◽  
Ficus Glomerata

The purpose of this research is to know the mechanical strength of gypsum board by utilizing waste sawn wood. Raw materials used consist of flour, gypsum,wood particles, boraks and kambang (Goniothalamus sp), wood tarap (Artocarpus elasticus REINW) and lua (Ficus glomerata ROXB). Wood particle 40 mesh and 60 mesh, concentrations boraks of 1 and 2 and the percentage particles of gypsum sawn timber is 300, 400 and 500%. The results showed that the average value Modulus of Rufture (MoR) in lua wood ranges from 12.55 – 14,47 kgcm2, wood kambang 25.10-31,11 kgcm2 and wood tarap 19.20- 24,18 kgcm2. As for Modulus of Elasticity (MoE) on the lua 1129,80- 2092,70 kgcm2, wood kambang 2512,37-3971,32 kgcm2 and tarap 2050,63-2691,09 kgcm2. Gypsum board are mechanical properties do not meet quality standards created SNI 03-6434-2000.Keywords: sawdust, lua, kambang, tarap, gypsum, mechanical

COMPARATIVE ANALYSIS OF BIOACTIVE SUBSTANCES CONTENT IN THE LEAVES AND FRUITS OF A ROWAN-TREE (SORBUS AUCUPARIA FRUCTUS) AND ASSESSMENT OF PROSPECTS IN MEDICINE AND PHARMACY

2020 ◽  
pp. 58-62
Author(s):  
Chernichkina A.D.
Keyword(s):  
Raw Materials ◽  
Wide Distribution ◽  
Biologically Active ◽  
Bioactive Substances ◽  
Plant Raw Materials ◽  
Mountain Ash ◽  
The Russian Federation ◽  
Materials Used ◽  
Active Substances ◽  
Pectin Substances

A large number of biologically active substances, organic acids, tannins, and pectin substances were detected during the study of fruits, leaves, and pulp of the fruits of mountain Ash. The content of these substances in leaves and pulp will significantly expand the arsenal of medicinal plant raw materials used. Given the wide distribution of mountain Ash in the territory of the Russian Federation, harvesting leaves from the same plants after harvesting the fruit and using pulp will make it possible to obtain new phytopreparations.

Mutual Influence Study of Food Acids and Polysaccharides of Different Nature on the Sensory Perception of Low-Calorie Sweet Dishes

Food Industry ◽  
2020 ◽  
Vol 5 (2) ◽  
pp. 71-78
Author(s):  
Ekaterina Minnikhanova ◽  
Nataliya Zavorokhina ◽  
Anna Gilina
Keyword(s):  
Mutual Influence ◽  
Raw Materials ◽  
Sucrose Solution ◽  
Complex Mixture ◽  
The Body ◽  
Sensory Characteristics ◽  
Apple Pectin ◽  
Low Calorie ◽  
Functional Reserves ◽  
Materials Used

Abstract The inclusion of polysaccharide thickeners in the recipes of sweet dishes increases the functional reserves of the body, contributes to the preservation of health and the prevention of diseases. The purpose of the research is to study the sensory characteristics of polysaccharides of various nature when combined with food acids, to develop a recipe for a basic mixture of low-calorie meals for public catering. The authors analyzed citric, lactic and succinic acids in combinations with polysaccharides of various nature. Organoleptic tests were evaluated by a touch panel. The organization of the tasting analysis corresponded to GOST ISO 6658-2016; the consistency was determined according to GOST 31986-2012, GOST ISO 11036-2017, GOST ISO 8588-2011. The optimal organoleptic combinations of the presented food acids and complex additives of sweeteners (CDP) were identified, which included aspartame, sodium saccharinate, Sucralose, sweetness coefficient – 340: the mixture with citric acid had a long pleasant aftertaste without foreign tastes and the best taste characteristics. Using the “A-not A” method, we found that the sample with the addition of CDP is identical to the sucrose solution. In the second part of the study, polysaccharides were added to model samples of acids with complex sweeteners; the best sensory characteristics were obtained by model samples consisting of a mixture of low-esterified Apple pectin with lactic acid and KDP. The technology of obtaining a stable elastic jelly using low-esterified Apple pectin has been developed, since the complex mixture of sweeteners and food acids does not have a dehydrating effect. Developed a dry mix recipe that can serve as a basic development, low-calorie sweet products for catering and has a variance of use of lactic and succinic acids, depending on the flavor characteristics of the raw materials used and its corrective ability.

DAMPAK SUBSITUSI IMPORT TERHADAP DEFISIT NERACA PERDAGANGAN: STUDI KASUS IMPOR KULIT INDONESIA

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Ivan Yulianto ◽  
Ario Seno Nugroho
Keyword(s):  
General Equilibrium ◽  
Foreign Exchange ◽  
Computable General Equilibrium ◽  
Trade Balance ◽  
Raw Materials ◽  
Import Substitution ◽  
Leather Industry ◽  
Materials Used ◽  
Net Export ◽  
Balance Deficit

An alternative strategy to reduce the trade balance deficit simultaneously to increase the net foreign exchange is the import-substitution for raw materials used to produce an export goods. This paper proposes an import substitution study on footwear products that have a dependency on imported raw materials by 70 percent, with the largest composition being leather raw materials by 67 percent. This paper analyzes the relationship between subsidies on the leather industry to leather import-substitution, multiplier effect to footwear sector, and Indonesia trade balance. Author make use of simulation the on Input-Output 2010 table and Computable General Equilibrium (CGE) Model. The simulation shows 100 billion subsidies on the leather sector, lead for the substitution-import of leather by 7,94 million rupiah, increase the net export foreign exchange by 1.1 billion rupiah of the footwear sector, and for overall, increase Indonesia trade balance deficit by 68 billion rupiah. Keywords: Computable General Equilibrium, footwear, leather, net foreign exchange, subsidy.ABSTRAK: Salah satu terobosan untuk mengurangi defisit neraca perdagangan dan meningkatkan nilai neto devisa ekspor adalah dengan substitusi impor bahan baku yang digunakan untuk memproduksi barang ekspor. Paper ini mengusulkan kajian substitusi impor pada produk alas kaki yang mempunyai ketergantungan bahan baku impornya sebesar 70 persen, dengan komposisi terbesar adalah bahan baku kulit sebesar 67 persen. Tujuan penelitian ini adalah untuk mengetahui dampak stimulus subsidi pada industri kulit terhadap subtitusi impor kulit, dukungan multiplier sektor kulit terhadap sektor alas kaki, serta terhadap devisa ekspor Indonesia. Penelitian ini menggunakan simulasi model Computable General Equilibrium (CGE). Hasil simulasi menunjukkan stimulus subsidi sebesar 100 milyar rupiah pada sektor kulit memberikan substitusi bahan baku kulit sebesar 7,94 juta rupiah, menaikkan devisa ekspor sektor alas kaki sebesar 1.1 miliar rupiah, serta secara keseluruhan menambah defisit neraca berjalan Indonesia sebesar 68 miliar rupiah. Kata kunci: alas kaki, Computable General Equilibrium (CGE), devisa ekspor, kulit, subsidi.

New surface treatment techniques to minimize copper alloy leaching in drinking water

2012 ◽  
Vol 7 (4) ◽  
Author(s):  
Norikazu Sugaya
Keyword(s):  
Surface Treatment ◽  
Raw Materials ◽  
Organic Film ◽  
Forming Process ◽  
Mixed Acid ◽  
Treatment Techniques ◽  
Acid Washing ◽  
Washing Process ◽  
Film Forming ◽  
Materials Used

This new surface treatment is simple and easy as well as low in cost. The processes can even be performed by hand. Pharmaceutical raw materials used for the surface treatment, such as hydrochloric acid and nitric acid used in a mixed acid washing process and vegetable oil used in an organic film forming process, are easily obtained in many countries.

scholarly journals Bio-Based Alternatives to Phenol and Formaldehyde for the Production of Resins

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2237 ◽  
Author(s):  
P. R. Sarika ◽  
Paul Nancarrow ◽  
Abdulrahman Khansaheb ◽  
Taleb Ibrahim
Keyword(s):  
Raw Materials ◽  
Phenol Formaldehyde ◽  
Raw Material ◽  
Wood Industry ◽  
Suitable Material ◽  
The Past ◽  
Wide Range ◽  
Recent Developments ◽  
Sustainable Materials ◽  
Materials Used

Phenol–formaldehyde (PF) resin continues to dominate the resin industry more than 100 years after its first synthesis. Its versatile properties such as thermal stability, chemical resistance, fire resistance, and dimensional stability make it a suitable material for a wide range of applications. PF resins have been used in the wood industry as adhesives, in paints and coatings, and in the aerospace, construction, and building industries as composites and foams. Currently, petroleum is the key source of raw materials used in manufacturing PF resin. However, increasing environmental pollution and fossil fuel depletion have driven industries to seek sustainable alternatives to petroleum based raw materials. Over the past decade, researchers have replaced phenol and formaldehyde with sustainable materials such as lignin, tannin, cardanol, hydroxymethylfurfural, and glyoxal to produce bio-based PF resin. Several synthesis modifications are currently under investigation towards improving the properties of bio-based phenolic resin. This review discusses recent developments in the synthesis of PF resins, particularly those created from sustainable raw material substitutes, and modifications applied to the synthetic route in order to improve the mechanical properties.

Sign in / Sign up

Export Citation Format

Share Document