scholarly journals FORMATION OF ENERGY EFFICIENT SYSTEMS FOR PROVIDING ABIOTIC FACTORS IN ADAPTIVE TECHNOLOGIES OF CULTIVATION OF UTERINE ENTOMOCULES

Author(s):  
N. Pishchanska ◽  
◽  
V. Belchenko ◽  
V. Targony

Abstract. Energy-efficient systems that will enable the implementation of abiotic conditions - important components of adaptive technologies, such as air temperature, relative humidity, air mobility, lighting levels, etc., must meet the requirements of environmental friendliness and minimize economic and energy costs. This requires the use of modern energy efficient technologies, equipment and devices. The purpose of the research is the development of a system for providing abiotic factors in the implementation of adaptive technologies for crops of guaranteed quality, characterized by resource savings and environmental safety. Methods. Analysis of the introduction of technologies and equipment in the process of cultivation of uterine entomocultures, which will increase the efficiency of technological processes of entomoproduction production. Results. The key abiotic factors in adaptive technologies of cultivation of uterine cultures are determined. Technologies, equipment and devices for their provision are studied and the initial requirements to the energy efficient systems consisting of them are formed. Conclusions. The analysis showed the advantages of using film contact devices and ultrasonic ones for energy treatment in adaptive technologies of cultivation of uterine entomocultures in terms of energy efficiency by almost 20% and efficiency by 15%. To ensure the required type and level of lighting, it is recommended to use incandescent lamps and LED lamps. Nozzles with nozzles and perforated panels are defined as distributive elements for air supply, which will almost double the efficiency of using the potential of the air prepared by the microclimate system.

2017 ◽  
Vol 1 (2) ◽  
pp. 19-29 ◽  
Author(s):  
Tetiana Kryvomaz ◽  
Dmytro Varavin

As a result of research into the state of the housing stock in Kiev and the prospects for its reconstruction, the main levels of implementation of eco-energy-efficient measures have been identified, taking into account the increasing cost / effectiveness ratio, which will include problem assessment, optimizing energy costs, eco-energy efficient housing reconstruction, application of innovative technologies. Based on the national and international experience of reconstruction and overhaul, the 6E concept is proposed, which focuses on energy efficiency, environmental safety, economy, ecology, ergonomics and aesthetics of the reconstruction process. Compliance with the basic requirements of eco-energy efficiency in the process of housing reconstruction will ensure the comfort of residents and will improve the level of environmental safety of our country. Introduction of the principles of energy efficiency in the process of reconstruction of housing stock is an integral part of Ukraine's environmental and national security, as it ensures a reduction in the negative impact on the environment and people, and also significantly reduces the waste of the construction industry.


Author(s):  
Svetlana Rubtsova ◽  
Svetlana Rubtsova ◽  
Natalya Lyamina ◽  
Natalya Lyamina ◽  
Aleksey Lyamin ◽  
...  

The concept of a new approach to environmental assessment is offered in the system of integrated management of the resource and environmental safety of the coastal area of the Black Sea. The studies of the season and daily changeability in the bioluminescence field in the Sevastopol coastal waters has been conducted. For the first time considerable differences in the bioluminescence field seasonal changes in the surface and deep water layers and the reasons conditioning this phenomenon have been shown, using a method of multidimensional statistical analysis. The bioluminescence field vertical profile change in the Black sea coastal waters in the autumn period at night has been studied. It has been shown that according to the character of bioluminescence parameters dynamics a water column can be divided into layers: upper (0 – 35 m) and deep water (36 – 60 m). It has been revealed that life rhythms of the plankton community are the main reason for the bioluminescence field intensity variability. It has been revealed that 14-hour periodicity of the bioluminescence field is related to the changes in light and its variations with 2,5…4,5 hours are conditioned by planktonts endogenous daily rhythms. And here biotic factors effect mostly periodicity of the bioluminescence field intensity increase and fall down at the dark time of the day. Abiotic factors are of less importance in circadian rhythmic of the bioluminescence field in the neritic zone.


2019 ◽  
Vol 68 (1) ◽  
pp. 999-1003 ◽  
Author(s):  
Nan Qi ◽  
Ming Xiao ◽  
Theodoros A. Tsiftsis ◽  
Rugui Yao ◽  
Shahid Mumtaz

2014 ◽  
Vol 493 ◽  
pp. 74-79
Author(s):  
Y.A. Sabtalistia ◽  
S.N.N. Ekasiwi ◽  
B. Iskandriawan

Energy consumption for air conditioning systems (air conditioning system) increased along with the increasing need for fresh air and comfortable in the room especially apartments. FAC system (Floor Air Conditioning) is growing because it is more energy efficient than CAC (Ceiling Air Conditioning) system. However, the position of the AC supply is on the lower level at the FAC system causes draft discomfort becomes greater as air supply closer to the occupants so that thermal comfort can be reduced. Heat mixture of windows, exterior walls, kitchen, and occupants in the studio apartment affect thermal comfort in the room too.This study aims to determine the position of the AC supply which has the best thermal comfort of FAC system in the studio apartment. It can be done by analyzing ADPI (Air Diffusion Performance Index), the distribution of air temperature, wind speed, RH (Relative Humidity), and DR (Draft Risk) to change the position of the AC supply supported by CFD (Computational Fluid Dynamics) simulation.This result prove that AC position 2 (on wall near the kitchen) is more comfortable than AC position 1 (on the bathroom wall) because AC position 2 away from occupied areas, thereby reducing the occurrence of draught discomfort.


Author(s):  
E. A. Kuznetsov ◽  
N. P. Nesterkina ◽  
Yu. A. Zhuravleva ◽  
S. A. Mikaeva

The article provides a technical and economic comparison of costs when covering 10 classrooms of a general educational institution with LED and fluorescent lamps for a period of 10 years. The main advantage of led light sources is the high level of light output compared to traditional light sources. Replacing incandescent lamps and gas-discharge ICS with led ICS can significantly reduce energy costs. Currently, led ICS are increasingly replacing traditional ICS due to their high energy efficiency and safety. For comparison, luminescent lamps LVO04-4x14-031 and LED lamps DVO12-45-003 produced by JSC “Ardatovsky lighting plant” with a comparable light flux and light distribution were selected. The number of lamps in the 65 m2 auditorium was chosen based on the normalized illumination of 500 Lux on a horizontal work surface (0.8 m). The calculation of the number of lamps that meet all the requirements for lighting in General and higher educational institutions was carried out in the DiaLux 4.13 program. According to preliminary calculations, lighting with led lamps will reduce energy costs over 10 years by 2.16 times compared to fluorescent lamps. The maximum expenses are spent on the purchase of new led lamps. This is mainly due to the higher price of led lighting devices compared to fluorescent ones.


2019 ◽  
Vol 124 ◽  
pp. 05086
Author(s):  
Daria Baklanovskaya ◽  
Marat Goguadze ◽  
Alexey Shmatko

The development of the metallurgical industry requires investing in the environmental safety of processes and technologies of metal processing, as well as to the measures aimed at energy costs reduction. We will look at the economic impact of reducing production costs by saving resources and improving the efficiency of the energy complex. The financial effect of reducing energy consumption per unit of production can be achieved by optimizing the purchase of energy resources, modes of operation of technological and support equipment, improving the management of the company’s energy complex. The article examines the most important indicators of the operating and financial activities of the three companies in the steel industry—Novolipetsk and Magnitogorsk Metallurgical Plants, as well as Severstal PJSC. The financial stability of these companies and the agility of their capital are quite high, and their fixed assets are financed by their own funds. Companies are also financially stable in the short term, as evidenced by the high current liquidity ratios (2 and above), and their own capital exceeds borrowing by 1.5 to 2 times. Thus, we can conclude that they are operationally efficient and have good financial sustainability in the short and long term.


Processes ◽  
2020 ◽  
Vol 8 (8) ◽  
pp. 901
Author(s):  
Aondohemba Aende ◽  
Jabbar Gardy ◽  
Ali Hassanpour

Currently over 845 million people are believed to be living under severe water scarcity, and an estimated 2.8 billion people across the globe are projected to come under serious water scarcity by the year 2025, according to a United Nations (UN) report. Seawater desalination has gained more traction as the solution with the most potential for increasing global freshwater supplies amongst other solutions. However, the economic and energy costs associated with the major desalination technologies are considered intrinsically prohibitive largely due to their humongous energy requirements alongside the requirements of complex equipment and their maintenance in most cases. Whilst forward osmosis (FO) is being touted as a potentially more energy efficient and cost-effective alternative desalination technique, its efficiency is challenged by draw solutes and the draw solutes recovery step in FO applications alongside other challenges. This paper looks at the present situation of global water scarcity, and a brief leap into the major desalination technologies employed. A closer look at the key drivers of FO as a seawater desalination technique in their individual domain and its outlook as an technology are further highlighted.


2018 ◽  
Vol 7 (3.5) ◽  
pp. 24 ◽  
Author(s):  
A.M Shmyrin ◽  
N.M Mishachev ◽  
V.V Semina

Considering cement production, we deal with dust, associated with a non-optimal operation of the dust-free ventilation system in the clinker burning department. The optimally organized heating, ventilating, and air conditioning system in any type of production ensures the microclimate of the production premises, corresponding to the sanitary norms and rules, which contribute to the increase of the staff’s efficiency. In this paper, the questions of the neighborhood modeling of the heating, ventilating, and air conditioning system in the premises of the cement production shop are considered. A system for minimizing energy costs and reducing dust emission in the clinker burning shop is proposed, which allows increasing the environmental safety of production. 


Author(s):  
Andrey Mikhailovich Saykin ◽  
Sergey Evgenievich Buznikov ◽  
Denis Vladimirovich Endachev ◽  
Kirill Evgenievich Karpukhin ◽  
Alexey Stanislavovich Terenchenko

<p>This article overviews the history of development of driverless vehicles both in Russia and the World. Foreign experience of development of driverless vehicles, including electric traction, is analyzed. Main stages of creation of experimental NAMI driverless electric vehicle are revised. Main engineering solutions are described concerning development of advanced NAMI driverless electric vehicle, its major components and control systems. Projects aimed at environmental safety of passengers in NAMI driverless electric vehicle are exemplified. Results of bench scale and running tests of NAMI driverless electric vehicle are summarized. Major advantages of driverless energy efficient and environmentally clean transport are demonstrated.</p>


2020 ◽  
Vol 324 ◽  
pp. 02004
Author(s):  
Artem Frolovich Porutchikov ◽  
Dmitriy Pavlovich Trubin

The paper presents the results of theoretical and experimental analysis of a vacuum-freeze-drying refrigeration machine based on carbon dioxide. Such refrigeration machines can be equipped with refrigerators for the needs of medicine, where low temperatures are widely in demand in the range from minus 80 degrees Celsius to minus 130 degrees Celsius. The problem of developing alternative refrigeration machines is dictated by modern environmental requirements for working substances, which are gradually being tightened and soon the use of familiar freons will become impossible. For the air conditioning and commercial refrigeration industry, new substances are being actively developed, such as hydrofluoroolefins (HFOs), hydrocarbons can also serve as substitutes for hydrofluorocarbons and their mixtures, but it must be considered that they are combustible and explosive. A carbon dioxide vacuum sublimation unit may be an alternative to modern freon vapor compression refrigeration units for the indicated temperature range, but subject to comparable energy costs during its operation. The article examined the three-stage and four-stage cycles of a vacuum-freeze-drying refrigeration machine, conducted their theoretical comparison in terms of COP with a cascade cycle on hydrocarbon working substances. It can be noted that the COP of the considered cycles are close, but the environmental friendliness, safety and non-combustibility of carbon dioxide gives the advantages of a vacuum freeze-drying refrigeration machine.


Sign in / Sign up

Export Citation Format

Share Document