scholarly journals The Effect of Heat Shocks and Freezing–Thawing Cycles on the Mechanical Properties of Natural Building Stones

2021 ◽  
Vol 8 ◽  
pp. 76-100
Author(s):  
Mohammad-Taghi Hamzaban ◽  
Ismail Sedat Büyüksağiş ◽  
Ali Touranchehzadeh ◽  
Milad Manafi
Keyword(s):  
Mechanical Properties ◽  
Mechanical Performance ◽  
Linear Regression Analysis ◽  
Physical And Mechanical Properties ◽  
P Wave ◽  
Multivariate Linear Regression Analysis ◽  
Mining Operations ◽  
Rock Samples ◽  
Rock Types ◽  
Natural Building

The damage to rock masses due to the action of freezing is one of the most important factors in the development of landscapes, the performance of civil structures, and the efficiency of mining operations. In this research paper, the effect has been studied on the physical and mechanical performance of seven different natural building rock samples. The testing program included an experimental study on both dry and saturated intact rock samples and therefore, the effect of saturation on the extent of damage on the tested samples has been discussed as well. Based on the obtained results, freezing–thawing cycles increase the porosity of rock samples and decrease the values of P-wave velocity, uniaxial compressive strength, elastic modulus, and Brazilian tensile strength. Moreover, the behavior of different rock types differs to some extent when exposed to weathering cycles under dry and saturated conditions. A multivariate linear regression analysis was used to predict the changes in the physical and mechanical properties of different rock types. It was been shown that with some cautions, the obtained correlations can be generalized for practical cases and can be used to predict the change of rock physical and mechanical properties during the lifetime of rock engineering projects. Such predictions have a high potential of applicability in quite different types of natural stone applications in cold climates. From the stability of structures created in rock materials to the durability of structures created by different natural stones.

scholarly journals The effect of saturation on the physical and mechanical behavior of some rock samples

2021 ◽  
Vol 2 (3) ◽  
pp. 23-31
Author(s):  
Mohammad Taghi Hamzaban
Keyword(s):  
Tensile Strength ◽  
Mechanical Behavior ◽  
Physical And Mechanical Properties ◽  
Intact Rock ◽  
P Wave ◽  
Mechanical Parameters ◽  
Brazilian Tensile Strength ◽  
Rock Samples ◽  
Rock Types ◽  
Major Factors

Different major factors control the strength of solid rocks. Moisture content is one of the most important factors, which can change the physical and mechanical behavior of intact rock as well as rock mass. Several early studies have shown that rock is weaker if tested wet rather than dry. In this paper, the density, P-wave velocity, uniaxial compressive strength, Brazilian tensile strength, and modulus of elasticity of seven different intact rock samples were measured under both dry and saturated conditions. The porosity of the samples was reported as well. Based on the obtained results, some correlations were proposed for estimating the saturated physical and mechanical properties from dry ones. The proposed correlations include different rock types and are more general than the previously reported ones. Comparing the obtained results showed that the mechanical and physical properties of weaker samples are more sensitive to the saturation process. Moreover, among the different mechanical parameters, Brazilian tensile strength exhibited more sensitivity to saturation. Comparing the results with the calculated porosities revealed that porosity is one of the key factors in the effect of saturation on physical and mechanical parameters. It seems that in the more porous rock samples, greater changes in the different measured parameters occur after saturation.

Experimental investigation of the mechanical behavior of glass fiber/high fluidity polyamide-based composites for automotive market

2021 ◽  
pp. 073168442110140
Author(s):  
Hossein Ramezani-Dana ◽  
Moussa Gomina ◽  
Joël Bréard ◽  
Gilles Orange
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Mechanical Performance ◽  
Physical And Mechanical Properties ◽  
Ultimate Strain ◽  
Uniaxial Tensile ◽  
Compression Tests ◽  
Automotive Market ◽  
Glass Fiber Reinforced ◽  
Glass Fiber Reinforcement

In this work, we examine the relationships between the microstructure and the mechanical properties of glass fiber–reinforced polyamide 6,6 composite materials ( V f = 54%). These materials made by thermocompression incorporate different grades of high fluidity polyamide-based polymers and two types of quasi-UD glass fiber reinforcement. One is a classic commercial fabric, while the other specially designed and manufactured incorporates weaker tex glass yarns (the spacer) to increase the planar permeability of the preform. The effects of the viscosity of the polymers and their composition on the wettability of the reinforcements were analyzed by scanning electron microscopy observations of the microstructure. The respective influences of the polymers and the spacer on the mechanical performance were determined by uniaxial tensile and compression tests in the directions parallel and transverse to the warp yarns. Not only does the spacer enhance permeability but it also improves physical and mechanical properties: tensile longitudinal Young’s modulus increased from 38.2 GPa to 42.9 GPa (13% growth), tensile strength increased from 618.9 MPa to 697 MPa (3% growth), and decrease in ultimate strain from 1.8% to 1.7% (5% reduction). The correlation of these results with the damage observed post mortem confirms those acquired from analyses of the microstructure of composites and the rheological behaviors of polymers.

scholarly journals Damage Evolution of Granodiorite after Heating and Cooling Treatments

Minerals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 779
Author(s):  
Mohamed Gomah ◽  
Guichen Li ◽  
Salah Bader ◽  
Mohamed Elkarmoty ◽  
Mohamed Ismael
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Failure Mode ◽  
Physical And Mechanical Properties ◽  
P Wave ◽  
Physical Parameters ◽  
Slow Cooling ◽  
Heating And Cooling ◽  
Natural Rock ◽  
The Impact

The awareness of the impact of high temperatures on rock properties is essential to the design of deep geotechnical applications. The purpose of this research is to assess the influence of heating and cooling treatments on the physical and mechanical properties of Egyptian granodiorite as a degrading factor. The samples were heated to various temperatures (200, 400, 600, and 800 °C) and then cooled at different rates, either slowly cooled in the oven and air or quickly cooled in water. The porosity, water absorption, P-wave velocity, tensile strength, failure mode, and associated microstructural alterations due to thermal effect have been studied. The study revealed that the granodiorite has a slight drop in tensile strength, up to 400 °C, for slow cooling routes and that most of the physical attributes are comparable to natural rock. Despite this, granodiorite thermal deterioration is substantially higher for quick cooling than for slow cooling. Between 400:600 °C is ‘the transitional stage’, where the physical and mechanical characteristics degraded exponentially for all cooling pathways. Independent of the cooling method, the granodiorite showed a ductile failure mode associated with reduced peak tensile strengths. Additionally, the microstructure altered from predominantly intergranular cracking to more trans-granular cracking at 600 °C. The integrity of the granodiorite structure was compromised at 800 °C, the physical parameters deteriorated, and the rock tensile strength was negligible. In this research, the temperatures of 400, 600, and 800 °C were remarked to be typical of three divergent phases of granodiorite mechanical and physical properties evolution. Furthermore, 400 °C could be considered as the threshold limit for Egyptian granodiorite physical and mechanical properties for typical thermal underground applications.

scholarly journals Efecto del dióxido de titanio en las propiedades mecánicas y autolimpiantes del mortero

2021 ◽  
Vol 25 (109) ◽  
pp. 88-97
Author(s):  
Carlos Magno Chavarry Vallejos ◽  
Liliana Janet Chavarría Reyes ◽  
Xavier Antonio Laos Laura ◽  
Andrés Avelino Valencia Gutiérrez ◽  
Enriqueta Pereyra Salardi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tio2 Nanoparticles ◽  
Low Temperatures ◽  
Mechanical Performance ◽  
Cement Mortar ◽  
Physical And Mechanical Properties ◽  
Cementitious Composites ◽  
Palabras Clave ◽  
Self Cleaning

El presente artículo tiene como objetivo determinar la influencia de la adición del dióxido de titanio (TiO2) en el mortero de cemento Pórtland Tipo I. La investigación es descriptiva, correlacional, explicativo, con diseño experimental, longitudinal, prospectivo y estudio de cohorte. Se elaboró una mezcla patrón y tres mezclas de mortero con 5%, 7.5% y 10% de contenido de TiO2 como reemplazo del volumen de cemento para las propiedades autolimpiantes se realizó el ensayo de rodamina e intemperismo. La incorporación de dióxido de titanio disminuyó la resistencia a la compresión, incrementó la fluidez y tasa de absorción de agua; la prueba de rodamina dio que el mortero sin actividad fotocatalítico no contenía TiO2 porque no cumple con los factores de fotodegradación R4 y R26. Mediante la exposición de paneles al intemperismo favoreciendo la propiedad autolimpiante de los morteros con adición de TiO2 (5%). Palabras Clave: Actividad foto catalítico, dióxido de titanio, factores de fotodegradación, propiedades mecánicas y autolimpiante. Referencias [1]E. Medina and H. Pérez, “Influencia del fotocatalizador dióxido de titanio en las propiedades autolimpiables y mecánicas del mortero de cemento - arena 1:4 - Cajamarca,” Universidad Nacional de Cajamarca, 2017. [2]G. Abella, “Mejora de las propiedades de materiales a base de cemento que contienen TiO 2 : propiedades autolimpiantes,” Universidad Politécnica de Madrid, 2015. [3]J. Gonzalez, “El Dióxido de titanio como material fotocatalitico y su influencia en la resistencia a la compresión en Morteros,” Universidad de San Buenaaventura Seccional Bello, 2015. [4]D. Jimenez and J. Moreno, “Efecto del reemplazo de cemento portland por el dioido de titanio en las propiedades mecanicas del mortero,” Pontificia Universidad Javeriana, 2016. [5]L. Wang, H. Zhang, and Y. Gao, “Effect of TiO2 nanoparticles on physical and mechanical properties of cement at low temperatures,” Adv. Mater. Sci. Eng., 2018, doi: 10.1155/2018/8934689. [6]Comisión de Normalización y de Fiscalización de Barreras Comerciales no Arancelares, Norma Técnica Peruana. Perú, 2013, p. 29. [7]ASTM Internacional, “ASTM C150,” 2021. https://www.astm.org/Database.Cart/Historical/C150-07-SP.htm. [8]M. Issa, “( current astm c150 / aashto m85 ) with limestone and process addition ( ASTM C465 / AASHTO M327 ) on the performance of concrete for pavement and Prepared By,” 2014. [9]S. Zailan, N. Mahmed, M. Abdullah, A. Sandu, and N. Shahedan, “Review on characterization and mechanical performance of self-cleaning concrete,” MATEC Web Conf., vol. 97, pp. 1–7, 2017, doi: 10.1051/matecconf/20179701022. [10]C. Chavarry, L. Chavarría, A. Valencia, E. Pereyra, J. Arieta, and C. Rengifo, “Hormigón reforzado con vidrio molido para controlar grietas y fisuras por contracción plástica,” Pro Sci., vol. 4, no. 31, pp. 31–41, 2020, doi: 10.29018/issn.2588-1000vol4iss31.2020pp31-41. [11]D. Tobaldi, “Materiali ceramici per edilizia con funzionalità fotocatalitica,” Università di Bologna, 2009. [12]Norme UNI, “Norma Italiana UNI 11259,” 2016. http://store.uni.com/catalogo/uni-11259-2008?josso_back_to=http://store.uni.com/josso-security-check.php&josso_cmd=login_optional&josso_partnerapp_host=store.uni.com. [13]E. Grebenisan, H. Szilagyi, A. Hegyi, C. Mircea, and C. Baera, “Directory lines regarding the desing and production of self-cleaning cementitious composites,” Sect. Green Build. Technol. Mater., vol. 19, no. 6, 2019. [14]M. Kaszynska, “The influence of TIO2 nanoparticles on the properties of self-cleaning cement mortar,” Int. Multidiscip. Sci. GeoConference SGEM, pp. 333–341, 2018.

Comparative experimental study on physical and mechanical properties of quartz sandstone after water-cooling and natural-cooling under high temperature

2021 ◽  
pp. qjegh2020-181
Author(s):  
Haopeng Jiang ◽  
Annan Jiang ◽  
Fengrui Zhang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Uniaxial Compressive Strength ◽  
Heating Temperature ◽  
Physical And Mechanical Properties ◽  
P Wave ◽  
Water Cooling ◽  
Average Value ◽  
Cooling Methods

Experimental tests were conducted to study the influence of natural cooling and water cooling on the physical and mechanical properties of quartz sandstone. This study aims to understand the effect of different cooling methods on the physical and mechanical properties of quartz sandstone (such as mass, volume, density, P-wave velocity, elastic modulus, uniaxial compressive strength, etc.). The results show that the uniaxial compressive strength (UCS) and elastic modulus(E) of the specimens cooled by natural-cooling and water-cooling decrease with heating temperature. At 800℃, after natural cooling and water cooling, the average value of UCS decreased by 34.65% and 57.90%, and the average value of E decreased by 87.66% and 89.05%, respectively. Meanwhile, scanning electron microscope (SEM) images were used to capture the development of microcracks and pores within the specimens after natural-cooling and water-cooling, and it was found that at the same temperature, water cooling treatment was more likely to cause microcracks and pores, which can cause more serious damage to the quartz sandstone. These results confirm that different cooling methods have different effects on the physical and mechanical properties of quartz sandstone, and provide a basis for the stability prediction of rock mass engineering such as tunnel suffering from fire.

scholarly journals Effects of Temperature and Water on Mechanical Properties, Energy Dissipation, and Microstructure of Argillaceous Sandstone under Static and Dynamic Loads

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Rongrong Zhang ◽  
Dongdong Ma ◽  
Qingqing Su ◽  
Kun Huang
Keyword(s):  
Mechanical Properties ◽  
Energy Dissipation ◽  
Failure Modes ◽  
Split Hopkinson Pressure Bar ◽  
Physical And Mechanical Properties ◽  
P Wave ◽  
Peak Strain ◽  
Hopkinson Pressure Bar ◽  
Stress Strain ◽  
Sandstone Specimen

RMT-150B rock mechanics and split Hopkinson pressure bar (SHPB) devices were adopted to investigate the physical and mechanical properties, energy dissipation, and failure modes of argillaceous sandstone after different high temperatures under air-dried and saturation states. In addition, SEM and EDS tests were conducted to investigate its microstructure characteristics. Results showed that both the P-wave velocity and density of argillaceous sandstone specimen decreased with the increase of high temperature, while its porosity increased. Compared with static stress-strain curves, there was no obvious compaction stage for dynamic stress-strain curves, and the decrease rate of dynamic curves after peak strain was obviously slow compared with static curves. Both the static and dynamic strengths of argillaceous sandstone specimens decreased with increasing temperature, and the critical temperature point for the strength of argillaceous sandstone was 400°C. At the same temperature, the specific energy absorption under air-dried state was generally smaller compared with that under saturated state. Both the strain rate and temperature showed significant effect on the failure mode. After 100∼1000°C heat treatment, the granular crystals of the clastic structure gradually became larger, and both the number and average size of the original pores decreased, resulting in the deterioration of mechanical properties of argillaceous sandstone specimen.

scholarly journals Cement Paste Mixture Proportioning with Particle Packing Theory: An Ambiguous Effect of Microsilica

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 6970
Author(s):  
Paweł Niewiadomski ◽  
Anna Karolak ◽  
Damian Stefaniuk ◽  
Aleksandra Królicka ◽  
Jacek Szymanowski ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Cement Paste ◽  
Building Materials ◽  
Mechanical Performance ◽  
Physical And Mechanical Properties ◽  
Sio2 Nanoparticles ◽  
Negative Influence ◽  
Particle Packing ◽  
Cement Pastes ◽  
Low Porosity

Recently, the research of innovative building materials is focused on applying supplementary materials in the form of micro- and nanopowders in cementitious composites due to the growing insistence on sustainable development. Considering above, in paper, a research on the effect of microsilica and SiO2 nanoparticles addition to cement paste, designed with Andreasen and Andersen (AA) packing density model (PDM), in terms of its physical and mechanical properties was conducted. Density, porosity, compressive strength, hardness, and modulus of indentation were investigated and compared regarding different amount of additives used in cement paste mixes. Microstructure of the obtained pastes was analyzed. The possibility of negative influence of alkali-silica reaction (ASR) on the mechanical properties of the obtained composites was analyzed. The results of the conducted investigations were discussed, and conclusions, also practical, were presented. The obtained results confirmed that the applied PDM may be an effective tool in cement paste design, when low porosity of prepared composite is required. On the other hand, the application of AA model did not bring satisfactory results of mechanical performance as expected, what was related, as shown by SEM imaging, with inhomogeneous dispersion of microsilica, and creation of agglomerates acting as reactive aggregates, what as a consequence caused ASR reaction, crack occurrence and lowered mechanical properties. Finally, the study found that the use of about 7.5% wt. of microsilica is the optimum in regards to obtain low porosity, while, to achieve improved mechanical properties, the use of 4 wt. % of microsilica seems to be optimal, in the case of tested cement pastes.

scholarly journals Physical and mechanical properties of the rocks of the Starobinsky deposit forming the Third potash layer and its roof

2021 ◽  
Vol 65 (4) ◽  
pp. 484-494
Author(s):  
A. B. Petrovsky ◽  
V. Ya. Prushak ◽  
E. A. Lutovich
Keyword(s):  
Mechanical Properties ◽  
Physical And Mechanical Properties ◽  
Geological Structure ◽  
Mining Operations ◽  
The Third ◽  
Composition And Structure ◽  
Mining Conditions ◽  
The Stability ◽  
Roof Falling ◽  
Main Factor

The geological structure and the physical-mechanical properties of rocks composing and overlapping the Third potash formation in the areas of the mine field mine No. 4 JSC Belaruskali, which are scheduled to practice, are studied. The geological sections of the Third potash layer and its roof were built, the thickness of sylvinite and halite layers was measured, the roof falling of the rocks of the layer with a height of up to 20 m was assessed, and the type of immediate roof was determined by the composition and structure of its constituent rocks. It was established that the strength under uniaxial compression of both sylvinite and halite layers for the areas under consideration differs slightly. Therefore, to solve engineering problems of ensuring the stability of mine workings and to calculate fastening parameters, strength values averaged over the groups of layers can be used that correlate well with the percentage of weak and clay interlayers. The same applies to Poisson’s ratio, the values of which for various layers of formation are slightly different and can be taken by their averaging. It is shown that the main factor that negatively affects the strength of rocks occurring in the roof of the Third potash seam is the presence of weak and clay interlayers, which increases with depth. The introduction of the obtained results allows us to improve the calculation accuracy of securing mining parameters, to reduce the costs of their maintenance, and to improve the safety of mining operations in developing the Third potash formation in complex geological and mining conditions.

scholarly journals Analysis of efficiency of drilling equipment use in mining operations

2021 ◽  
Vol 315 ◽  
pp. 02018
Author(s):  
Yuriy Masaev ◽  
Vladislav Masaev ◽  
Yuriy Drozdenko
Keyword(s):  
Mechanical Properties ◽  
Energy Intensity ◽  
Physical And Mechanical Properties ◽  
Structural Features ◽  
Ore Deposits ◽  
Mining Operations ◽  
Drilling Equipment ◽  
Wide Range ◽  
Mine Workings ◽  
Underground Method

When developing coal and ore deposits by underground method, it is necessary to carry out a large volume of preparatory mine workings using drilling and blasting operations. Minerals are found in rocks under various conditions and their physical and mechanical properties change in a wide range. Under such conditions, it is necessary to use drilling machines this different to the principle of action and structural features. The article considers geometric parameters of roc cutters, peculiarities of drilling modes, affecting energy intensity and drilling productivity in rocks with different strength coefficient.

Sign in / Sign up

Export Citation Format

Share Document