scholarly journals STUDY OF EDGE PROTECTING ANCHORS INFLUENCE ON SOIL HEAVING OF THE MINE WORKING

2020 ◽  
Vol 5 (443) ◽  
pp. 71-80
Author(s):  
Demin Vladimir, ◽  
◽  
Mussin Ravil, ◽  
Demina Tatiana, ◽  
Zhumabekova Aila, ◽  
...  
Keyword(s):  
Mine Working ◽  
Economic Effect ◽  
Cross Sectional ◽  
Maintenance Costs ◽  
Technical Result ◽  
Technological Developments ◽  
Mine Workings ◽  
Anchor Bolts ◽  
Sectional Shape ◽  
The Cost

To achieve the objective with the claimed technical result, a method of fastening mine workings of predominantly rectangular cross-sectional shape with anchor bolts was used, while the applied task of reducing the heaving of soil rocks is to increase the efficiency of mine workings by ensuring that the mine workings. Ensuring the possibility of reliable and of good quality fortified rocks along the contour of making within the boundaries of the zone of possible collapse of rocks. The length of the soil anchors did not significantly affect the condition of the soil rocks. Consequently, that on the deformations and stresses both in the lateral and in the soils are not soil, but lateral anchors. The use of these technological developments will reduce the cost of conducting and maintaining workings by 7–10% with soil anchors (reducing maintenance costs by 7–10%) and will provide an economic effect of 10–15 thousand tenge per running meter of output.

JUSTIFICATION OF THE OPTIMAL CROSS-SECTIONAL SHAPE OF THE MINE WORKINGS IN ACCORDANCE WITH THE RATING CLASSIFICATION

Ugol ◽  
2020 ◽  
pp. 4-9
Author(s):  
A.Zh. Imashev ◽  
◽  
A.M. Suimbayeva ◽  
Sh.A. Abdibaitov ◽  
A.A. Musin ◽  
...  
Keyword(s):  
Cross Sectional ◽  
Mine Workings ◽  
Sectional Shape

On the cross-sectional shape of the cellulose crystallites in the tunicate Halocynthia papillosa

1990 ◽  
Vol 48 (3) ◽  
pp. 566-567
Author(s):  
J.-F. Revol ◽  
Y. Van Daele ◽  
F. Gaill
Keyword(s):  
Contrast Imaging ◽  
Animal Kingdom ◽  
Bright Field ◽  
Field Mode ◽  
Cross Sectional ◽  
Ultrathin Sections ◽  
The Cross ◽  
Sectional Shape ◽  
Valonia Ventricosa ◽  
C Nmr

The only form of cellulose which could unequivocally be ascribed to the animal kingdom is the tunicin that occurs in the tests of the tunicates. Recently, high-resolution solid-state l3C NMR revealed that tunicin belongs to the Iβ form of cellulose as opposed to the Iα form found in Valonia and bacterial celluloses. The high perfection of the tunicin crystallites led us to study its crosssectional shape and to compare it with the shape of those in Valonia ventricosa (V.v.), the goal being to relate the cross-section of cellulose crystallites with the two allomorphs Iα and Iβ.In the present work the source of tunicin was the test of the ascidian Halocvnthia papillosa (H.p.). Diffraction contrast imaging in the bright field mode was applied on ultrathin sections of the V.v. cell wall and H.p. test with cellulose crystallites perpendicular to the plane of the sections. The electron microscope, a Philips 400T, was operated at 120 kV in a low intensity beam condition.

ECONOMIC PERSPECTIVES OF BIOTECHNOLOGIES USING IN ANIMAL FARMING

1970 ◽  
pp. 57-60
Author(s):  
I. F. Gorlov ◽  
A. A. Mosolov ◽  
G. V. Komlatskiy ◽  
M. A. Nesterenko ◽  
K. D. Nimbona ◽  
...  
Keyword(s):  
Embryo Transfer ◽  
Economic Effect ◽  
Dairy Herd ◽  
State Level ◽  
Modern Level ◽  
Economic Perspectives ◽  
The Cost ◽  
Short Time

The article presents materials on the study of the possibility of reproduction and increase in the herd of highly productive cows through the use of embryo transplantation technology. The classical (in vivo) and more modern, developing (in vitro) methods of embryotransfer, their positive and negative sides are considered in detail. The possibility of accelerating the breeding process by using the method of transplantation, in which from one cow can be obtained from 10 to 100 calves, which will allow for 4-5 years, almost any herd (of any size and breed) with the help of biotechnology to turn into a cattle-breeding enterprise of the most modern level. At the same time, heifers obtained from unproductive cows can be used as "surrogate" mothers who are transplanted with the best donor embryos, which allows to obtain a full-fledged offspring adapted to local environmental conditions. A detailed scheme of obtaining, evaluation, storage, as well as the cost and economic effect of embryo transplantation was calculated, the market was evaluated, the required annual volume of transplants and the number of donor cows for large livestock farms were determined. As a positive example of "Scientific-production enterprise "Centre of biotechnology and embryo transfer" in 2014, implemented a project for accelerated replacement and genetic improvement of the dairy herd, engraftment averaged 57-69%, and the economic effect of the enterprise from getting a single animal by the method of embryo transfer, compared with imports of similar close in quality, ranged from 60 to 100 thousand rubles on his head. It is shown that it is necessary to organize at the state level a developed service for embryo transplantation to reduce the cost of embryo transfer and the possibility of creating in a short time in the country's own highly productive breeding nucleus of dairy and beef cattle, which will reduce, and in the future completely eliminate, import dependence on cattle products.

Automated 3D measurement of fiber cross section morphology in handsheets

2012 ◽  
Vol 27 (2) ◽  
pp. 264-269 ◽  
Author(s):  
Christian Lorbach ◽  
Ulrich Hirn ◽  
Johannes Kritzinger ◽  
Wolfgang Bauer
Keyword(s):  
Image Analysis ◽  
Cross Section ◽  
Cross Sections ◽  
Image Plane ◽  
3D Measurement ◽  
Cross Sectional ◽  
Fiber Cross Section ◽  
Fiber Wall ◽  
Sectional Shape ◽  
Cross Section Geometry

Abstract We present a method for 3D measurement of fiber cross sectional morphology from handsheets. An automated procedure is used to acquire 3D datasets of fiber cross sectional images using an automated microtome and light microscopy. The fiber cross section geometry is extracted using digital image analysis. Simple sample preparation and highly automated image acquisition and image analysis are providing an efficient tool to analyze large samples. It is demonstrated that if fibers are tilted towards the image plane the images of fiber cross sections are always larger than the true fiber cross section geometry. In our analysis the tilting angles of the fibers to the image plane are measured. The resulting fiber cross sectional images are distorted to compensate the error due to fiber tilt, restoring the true fiber cross sectional shape. We use an approximated correction, the paper provides error estimates of the approximation. Measurement results for fiber wall thickness, fiber coarseness and fiber collapse are presented for one hardwood and one softwood pulp.

Probiotics in the diets of laying quails

2020 ◽  
pp. 60-66
Author(s):  
O. Merzlyakova ◽  
V. Rogachyev ◽  
V. Chegodaev
Keyword(s):  
Bacillus Subtilis ◽  
Bacillus Licheniformis ◽  
Egg Production ◽  
Positive Impact ◽  
Hematological Parameters ◽  
Economic Effect ◽  
Egg Laying ◽  
Control Group ◽  
Egg Mass ◽  
The Cost

The efficiency of introducing probiotics based on strains of Bacillus subtilis, Bacillus licheniformis and their consortium in the amount of 150 g/t of feed into the diets of laying quails has been studied. The experiment lasting 182 days has been carried out on four groups of quails with 30 heads in each. The quails have been housed in the broiler battery in compliance with the required microclimate conditions. Quails of all groups have been received the main diet (compound feed) developed taking into account their age and physiological characteristics. The quails of the 1st, 2nd and 3rd experimental groups in addition to the main diet received probiotics (150 g/t compound feed) based on strains Bacillus subtilis, Bacillus licheniformis and their consortium, respectively. It has been found that feeding the laying quails of the consortium of strains Bacillus subtilis and Bacillus licheniformis had the most significant positive impact on their productive performance, it allowed to increase egg production by 7,81 %, egg laying intensity by 5,0 %, egg mass yield by 9,77 %, while reducing feed expenditures for 10 eggs by 13,35 %. The yield of hatching eggs has been increased by 7,03 %, hatchability of chickens from laid and fertilized eggs by 8,33 and 8,35 %, brooding waste decreased by 21,74 %. Hematological parameters of quails during the whole experiment were within the physiological norm. The economic effect calculated on the basis of data on the cost of compound feed, probiotics and the cost of sold eggs of quail laying was 14,56 % in the 3rd experimental group (in relation to the control group).

Evaluating the Outcomes of a Hospital-to-Community Model of Integrated Care for Dementia

2020 ◽  
pp. 1-6
Author(s):  
Ngoc Huong Lien Ha ◽  
Philip Yap Lin Kiat ◽  
Sean Olivia Nicholas ◽  
Ivana Chan ◽  
Shiou Liang Wee
Keyword(s):  
Cost Effectiveness ◽  
Integrated Care ◽  
Dementia Care ◽  
Behavioural Problems ◽  
Gdp Per Capita ◽  
Post Intervention ◽  
Cross Sectional ◽  
Life Years ◽  
Per Capita ◽  
The Cost

<b><i>Introduction:</i></b> Living with dementia is challenging for persons with dementia (PWDs) and their families. Although multi-component intervention, underscored by the ethos of person-centred care, has been shown to maintain quality of life (QOL) in PWDs and caregivers, a lack of service integration can hinder effectiveness. <b><i>Methods:</i></b> CARITAS, an integrated care initiative provided through a hospital-community care partnership, endeavours to provide person-centred dementia care through ambulatory clinic consults, case management, patient and caregiver engagement, and support. We evaluated CARITAS’ clinical outcomes and cost-effectiveness with a naturalistic cross-sectional within-subject design. We assessed patients’ function, QOL, and behavioural problems post-intervention. We estimated CARITAS’ cost-effectiveness from a patient’s perspective, benchmarking it against other dementia treatments and Singapore’s Gross Domestic Product (GDP) per capita. <b><i>Results:</i></b> CARITAS care significantly improved health utility (<i>p</i> &#x3c; 0.001), reduced caregiver burden (<i>p</i> &#x3c; 0.001), and improved PWDs’ behavioural problems (<i>p</i> &#x3c; 0.001) related to “memory” (<i>p</i> &#x3c; 0.001), “disruption” (<i>p</i> = 0.017), and “depression” (<i>p</i> &#x3c; 0.001). CARITAS’ benefits (<i>d</i><sub>RMBPC</sub> = 0.357, <i>d</i><sub>EQ5D index</sub> = 0.328, <i>d</i><sub>ZBI</sub> = 0.361) were comparable to those of other pharmacological and non-pharmacological interventions for dementia. CARITAS costs SG$133,056.69 per quality-adjusted life years gain, yielding an incremental cost-effectiveness ratio of 1.31 and 1.49 against the cost of donepezil in patients with mild Alz­heimer’s disease and Singapore’s GDP per capita in 2019, respectively, falling within the cost-effectiveness threshold of 1.0–3.0. <b><i>Discussion:</i></b> CARITAS integrated dementia care is a cost-effective intervention that showed promising outcomes for PWDs and their caregivers.

Study of Correctly Expanded Sonic Jet with Air Tabs

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Arun Prasad R ◽  
Thanigaiarasu S ◽  
Sembaruthi M ◽  
Rathakrishnan E
Keyword(s):  
Numerical Study ◽  
Cross Sectional ◽  
Potential Core ◽  
Convergent Nozzle ◽  
Jet Mixing ◽  
Pressure Profiles ◽  
Constant Diameter ◽  
Sonic Jet ◽  
Sectional Shape ◽  
Length Reduction

AbstractThe present numerical study is to understand the effect of air tabs located at the exit of a convergent nozzle on the spreading and mixing characteristics of correctly expanded sonic primary jet. Air tabs used in this study are two secondary jets issuing from constant diameter tubes located diametrically opposite at the periphery of the primary nozzle exit, normal to the primary jet. Two air tabs of Mach numbers 1.0 to 1.4, in steps of 0.1 are considered in this study. The mixing modification caused by air tabs are analysed by considering the mixing of uncontrolled (free) primary jet as a reference. Substantial enhancement in jet mixing is achieved with Mach 1.4 air tabs, which results in 80 % potential core length reduction. The total pressure profiles taken on the plane (YZ) normal to the primary jet axis, at various locations along the primary jet centreline revealed the modification of the jet cross sectional shape by air tabs. The stream-wise vortices and bifurcation of the primary jet caused by air tabs are found to be the mechanism behind the enhanced jet mixing.

Experimental investigation and optimization on field shaper structure parameters in magnetic pulse welding

2021 ◽  
pp. 095440542110148
Author(s):  
Yingzi Chen ◽  
Zhiyuan Yang ◽  
Wenxiong Peng ◽  
Huaiqing Zhang
Keyword(s):  
Magnetic Field ◽  
High Speed ◽  
Light Metal ◽  
Magnetic Pulse ◽  
Cross Sectional ◽  
Magnetic Pulse Welding ◽  
Pulse Welding ◽  
Sectional Shape ◽  
Welding System ◽  
The Magnetic Field

Magnetic pulse welding is a high-speed welding technology, which is suitable for welding light metal materials. In the magnetic pulse welding system, the field shaper can increase the service life of the coil and contribute to concentrating the magnetic field in the welding area. Therefore, optimizing the structure of the field shaper can effectively improve the efficiency of the system. This paper analyzed the influence of cross-sectional shape and inner angle of the field shaper on the ability of concentrating magnetic field via COMSOL software. The structural strength of various field shapers was also analyzed in ABAQUS. Simulation results show that the inner edge of the field shaper directly affects the deformation and welding effect of the tube. So, a new shape of field shaper was proposed and the experimental results prove that the new field shaper has better performance than the conventional field shaper.

scholarly journals Cost-Effectiveness of Colorectal Cancer Genetic Testing

2021 ◽  
Vol 18 (16) ◽  
pp. 8330
Author(s):  
Abdul Rahman Ramdzan ◽  
Mohd Rizal Abdul Manaf ◽  
Azimatun Noor Aizuddin ◽  
Zarina A. Latiff ◽  
Keng Wee Teik ◽  
...  
Keyword(s):  
Colorectal Cancer ◽  
Genetic Testing ◽  
Cost Effectiveness ◽  
Cancer Survival ◽  
Screening Method ◽  
Targeted Prevention ◽  
Activity Based Costing ◽  
Cross Sectional ◽  
Increased Risk ◽  
The Cost

Colorectal cancer (CRC) remains the second leading cause of cancer-related deaths worldwide. Approximately 3–5% of CRCs are associated with hereditary cancer syndromes. Individuals who harbor germline mutations are at an increased risk of developing early onset CRC, as well as extracolonic tumors. Genetic testing can identify genes that cause these syndromes. Early detection could facilitate the initiation of targeted prevention strategies and surveillance for CRC patients and their families. The aim of this study was to determine the cost-effectiveness of CRC genetic testing. We utilized a cross-sectional design to determine the cost-effectiveness of CRC genetic testing as compared to the usual screening method (iFOBT) from the provider’s perspective. Data on costs and health-related quality of life (HRQoL) of 200 CRC patients from three specialist general hospitals were collected. A mixed-methods approach of activity-based costing, top-down costing, and extracted information from a clinical pathway was used to estimate provider costs. Patients and family members’ HRQoL were measured using the EQ-5D-5L questionnaire. Data from the Malaysian Study on Cancer Survival (MySCan) were used to calculate patient survival. Cost-effectiveness was measured as cost per life-year (LY) and cost per quality-adjusted life-year (QALY). The provider cost for CRC genetic testing was high as compared to that for the current screening method. The current practice for screening is cost-saving as compared to genetic testing. Using a 10-year survival analysis, the estimated number of LYs gained for CRC patients through genetic testing was 0.92 years, and the number of QALYs gained was 1.53 years. The cost per LY gained and cost per QALY gained were calculated. The incremental cost-effectiveness ratio (ICER) showed that genetic testing dominates iFOBT testing. CRC genetic testing is cost-effective and could be considered as routine CRC screening for clinical practice.

Blast Wave Shaping by Altering Cross‐Sectional Shape

2021 ◽  
Author(s):  
Kelly Williams ◽  
Martin J. Langenderfer ◽  
Gayla Olbricht ◽  
Catherine E. Johnson
Keyword(s):  
Blast Wave ◽  
Cross Sectional ◽  
Sectional Shape
Sign in / Sign up

Export Citation Format

Share Document