scholarly journals RESEARCH ON MODERN FORENSIC METHODS OF DETECTION, RECORD, SEIZURE OF SHOEPRINTS AND THEIR FURTHER ACCOUNTING FOR CRIME DETECTION

2020 ◽  
Vol 21 (1) ◽  
pp. 106-119
Author(s):  
R. Pertsev
Keyword(s):  
Crime Scene ◽  
Database Systems ◽  
Practical Experience ◽  
Automated System ◽  
Significant Information ◽  
Crime Scene Investigators ◽  
Crime Detection ◽  
Forensic Tools ◽  
Crime Scenes

Shoe prints that have been traced by crime scene investigators at the crime scene can provide information relating to a criminal or a group of criminals that have committed it, and serve as evidence while pre-trial investigation. Furthermore, shoe prints provide information on the possible participation of the same person in different types of crimes (to integrate crimes). At present, the number of crimes related to stealing civilian properties, including robbery, has significantly increased as a result of economic crisis in many countries around the world. As the studies and the practical experience while investigating crime scenes by police in many countries show, footwear evidence as much as physical evidence have not been given due attention. In order to improve the quality of crime scene examination when seizing traces of shoes, the quality of removed traces of shoes, and, as a consequence, increase the efficiency of crime detection using traces of shoes, there is a necessity in: Introduction of modern forensic tools and methods for detecting, seizing traces of shoes, and further comparative research. Establishment of the Unified National Automated System at the legislative level for accounting and identification of shoeprints seized from unsolved crime sites. Creating professional forums to share experiences with leading international forensic experts. Establishing the terms for traces and shoeprints storage and use registered (for example, not more than two years from the date of registration) at the legislative level. In addition, implementation and development of automatic database systems with the ability to conduct identification between shoeprints evidence seized from different crime scenes can provide the investigator with significant information on the possible involvement of the same person in commission of different crimes (to combine crimes), conduct so-called forensic intelligence. A shoeprint as a single piece of evidence may not be weighty enough but combined with additional evidence it is vital for detecting and investigating a crime. In conclusion, it should be noted that this area has great prospects for development and, undoubtedly, should be addressed by forensic experts in this field.

scholarly journals RECENT TECHNIQUES BASED ON THE UTILIZATION OF DNA AND AUTOSOMAL SINGLE NUCLEOTIDE POLYMORPHISMS FOR IDENTIFYING HUMANS

2019 ◽  
Vol 17 (2) ◽  
pp. 58-62
Author(s):  
Fahmida Khatoon
Keyword(s):  
Forensic Science ◽  
Biological Samples ◽  
Crime Scene ◽  
The Body ◽  
Degraded Dna ◽  
Nucleotide Polymorphisms ◽  
Autosomal Snps ◽  
Significant Information ◽  
Dead Person ◽  
Crime Scene Investigators

The biological samples used in forensics can contain DNA which is highly fragmented as a consequence of exposure to any of the numerous degrading factors. Analysis of the sequence or size of the products of Polymerase chain reaction is at present responsible for the analysis of remains of humans in forensics. Despite the effectiveness of protocols based on PCR, there are certain limitations that are presented by the low numbers of copies of the template and the variations that are imposed by the decaying process to the template. The primary aim of this research is to explore the significance of autosomal SNPs in forensic science through the identification of humans at a crime scene. This study provides an exploration of the applicability of autosomal SNPs for the identification of humans at crime scene. This would fill the gap present in the current literature regarding the significance of autosomal SNPs in the identification of humans during crime scene investigation. It will also enable the identification of the criminals involved in several types of the crimes ranging from general theft to rape and sexual assault, murder, and robberies. It will also allow the identification of dead bodies in cases where it is difficult to identify the dead person due to unrecognizable condition of the body. This study will facilitate the improvement of the investigation of crime scene investigators. It will provide a significant way for the incorporation of recent techniques of the molecular genetics into forensics. Reduction in the workload of the crime scene investigators would also occur through the implementation of outcomes of this study into the field of forensic science. There are several studies which have demonstrated the applicability of SNPs in forensic investigations for identifying the humans at crime scene. Several effective and efficient technological systems have been developed by the researchers which are capable of performing analysis of biological samples containing degraded DNA because SNPs can be obtained from these samples. Physical characteristics of the individuals can be predicted through the analysis of SNPs. This can provide significant information about the color of eye, hair and skin of the individuals involved in crime.

scholarly journals RECENT TECHNIQUES BASED ON THE UTILIZATION OF DNA AND AUTOSOMAL SINGLE NUCLEOTIDE POLYMORPHISMS FOR IDENTIFYING HUMANS

2019 ◽  
Vol 17 (2) ◽  
Author(s):  
Fahmida Khatoon
Keyword(s):  
Forensic Science ◽  
Biological Samples ◽  
Crime Scene ◽  
The Body ◽  
Degraded Dna ◽  
Nucleotide Polymorphisms ◽  
Autosomal Snps ◽  
Significant Information ◽  
Dead Person ◽  
Crime Scene Investigators

The biological samples used in forensics can contain DNA which is highly fragmented as a consequence of exposure to any of the numerous degrading factors. Analysis of the sequence or size of the products of Polymerase chain reaction is at present responsible for the analysis of remains of humans in forensics. Despite the effectiveness of protocols based on PCR, there are certain limitations that are presented by the low numbers of copies of the template and the variations that are imposed by the decaying process to the template. The primary aim of this research is to explore the significance of autosomal SNPs in forensic science through the identification of humans at a crime scene. This study provides an exploration of the applicability of autosomal SNPs for the identification of humans at crime scene. This would fill the gap present in the current literature regarding the significance of autosomal SNPs in the identification of humans during crime scene investigation. It will also enable the identification of the criminals involved in several types of the crimes ranging from general theft to rape and sexual assault, murder, and robberies. It will also allow the identification of dead bodies in cases where it is difficult to identify the dead person due to unrecognizable condition of the body. This study will facilitate the improvement of the investigation of crime scene investigators. It will provide a significant way for the incorporation of recent techniques of the molecular genetics into forensics. Reduction in the workload of the crime scene investigators would also occur through the implementation of outcomes of this study into the field of forensic science. There are several studies which have demonstrated the applicability of SNPs in forensic investigations for identifying the humans at crime scene. Several effective and efficient technological systems have been developed by the researchers which are capable of performing analysis of biological samples containing degraded DNA because SNPs can be obtained from these samples. Physical characteristics of the individuals can be predicted through the analysis of SNPs. This can provide significant information about the color of eye, hair and skin of the individuals involved in crime.

Concept Of Increasing The Level Of Projects Of Work Production

2020 ◽  
pp. 59-63
Keyword(s):  
Practical Experience ◽  
Production Plan ◽  
The Real ◽  
Master Plans ◽  
General Contractor ◽  
Work Production ◽  
Construction Organization ◽  
Production Plans

The author analyzes the reasons that objectively reduce the importance and quality of the organizational and technological solutions of work production plans and the content of their main documents. Based on a generalization of practical experience, one of the real ways of increasing the level of work production plans is proposed as a result of the development of "The Unified Rules for Work Production on the Site" as part of the construction organization project, in the form of fundamental requirements, followed by the inclusion of this document in the work production plan as an input document. The structure and content of the Unified Rules are described with the disclosure of the main documents - calendar plans of work, construction master plans, technological schemes of works. The first section of the document contains requirements for the content of tasks for the development of the project of work execution, the order of its approval, and requirements for the quality of solutions. The second section presents principal solutions, methods of work execution and their technological schemes. The organizational and technological solutions adopted in the proposed document are specified and detailed by the General Contractor Construction Organization with due regard for the resource capabilities and the actual conditions of construction or reconstruction.

ANAAC AND HIGHER EDUCATION IN, INDIA

2018 ◽  
Vol 6 (26) ◽  
Author(s):  
Seema Singh
Keyword(s):  
Higher Education ◽  
Quality Assurance ◽  
Manufacturing Industry ◽  
Practical Experience ◽  
Individual Autonomy ◽  
Economic Activities ◽  
Quality Of Higher Education ◽  
National Quality ◽  
Education In India

Quality, as we know so far, was originally developed in the manufacturing industry. In the area of higher education, the adoption of quality control has been superficial and diluted by the exercise of academic . Further, the prevailing culture of universities is often based on individual autonomy, which is zealously guarded. Thus, it is usually difficult to apply the features of quality to higher education considering the fact that quality requires. However, the quality of higher education is very important for its stakeholders. Notably, providers (funding bodies and the community at large), students, staff and employers of graduates are. The most commonly grouped dimensions of quality are product, software and service. In the changing context marked by expansion of higher education and globalization of economic activities, education has become a national concern with an international dimension. To cope with this changing context, countries have been pressurized to ensure and assure quality of higher education at a nationally comparable and internationally acceptable standard. Consequently, many countries initiated “national quality assurance mechanisms” and many more are in the process of evolving a suitable strategy. Most of the quality assurance bodies were established in the nineties and after a few years of practical experience, they are rethinking many issues of quality assurance. At this juncture where countries look for experiences and practices elsewhere, the experience of India has many valuable lessons and this report is an attempt to share those developments..

scholarly journals Phase separation during blood spreading

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Houssine Benabdelhalim ◽  
David Brutin
Keyword(s):  
Phase Separation ◽  
Relative Humidity ◽  
Whole Blood ◽  
Crime Scene ◽  
Blood Pool ◽  
Ambient Temperatures ◽  
Surrounding Environment ◽  
Crime Scene Investigators ◽  
Almost All ◽  
Pool Area

AbstractBlood pools can spread on several types of substrates depending on the surrounding environment and conditions. Understanding the influence of these parameters on the spreading of blood pools can provide crime scene investigators with useful information. The focus of the present study is on phase separation, that is, when the serum spreads outside the main blood pool. For this purpose, blood pools with constant initial masses on wooden floors that were either varnished or not were created at ambient temperatures of $$21~^{\circ }\hbox {C}$$ 21 ∘ C , $$29~^{\circ }\hbox {C}$$ 29 ∘ C , and $$37~^{\circ }\hbox {C}$$ 37 ∘ C with a relative humidity varying from 20 to 90%. The range $$21~^{\circ }\hbox {C}$$ 21 ∘ C to $$37~^{\circ }\hbox {C}$$ 37 ∘ C covers almost all worldwide indoor cases. The same whole blood from the same donor was used for all experiments. As a result, an increase in relative humidity was found to result in an increase in the final pool area. In addition, at the three different experimental temperatures, the serum spread outside the main pool at relative humidity levels above 50%. This phase separation is more significant on varnished substrates, and does not lead to any changes in the drying morphology. This phenomenon is explained by the competition between coagulation and evaporation.

The structure and application of an automated system for monitoring passenger traffic

2021 ◽  
Vol 14 (3) ◽  
pp. 4-11
Author(s):  
Evgeniy Anikeev
Keyword(s):  
Data Collection ◽  
General Structure ◽  
Automated System ◽  
Passenger Transport ◽  
Service Levels ◽  
Passenger Traffic ◽  
Advantages And Disadvantages ◽  
Transport Services ◽  
Transport Control

Various methods of collecting data on passenger traffic, their advantages and disadvantages are considered. It is shown that in order to improve the quality of transport services, it is necessary to regularly collect and refine data on passenger traffic. The goals and methods of obtaining information about passenger traffic in the system of municipal passenger transport are indicated. All currently existing methods are divided into three categories: data collection using technical means, data collection with the help of censors and volunteers, and interpretation of fare payments. All the methods presented in the article were compared in terms of labor intensity, costs and accuracy of the results obtained. The advantages and disadvantages of each method are considered. The general structure of an automated system for collecting data on passenger traffic is presented. The necessity of creating a centralized system for collecting and processing data associated with all passenger transport control systems has been substantiated. The tasks solved by this system at all levels of transport services for passengers are shown. Each of the tasks is assigned to one of three service levels: pre-transport, transport and post-transport. It is shown that only solving problems at all levels can ensure high-quality operation of the municipal passenger transport system.

scholarly journals Development and evaluation of an automated system for testing current meters

2016 ◽  
Vol 20 (2) ◽  
pp. 181-187 ◽  
Author(s):  
Ezequiel Saretta ◽  
Antonio P. de Camargo ◽  
Tarlei A. Botrel ◽  
Marinaldo F. Pinto ◽  
Geancarlo T. Katsurayama ◽  
...  
Keyword(s):  
User Interface ◽  
Data Acquisition ◽  
Flow Velocity ◽  
Reference Value ◽  
Vertical Axis ◽  
Automated System ◽  
Step Motor ◽  
Simple Task ◽  
Rivers And Streams

ABSTRACT Current meters are equipment widely used for estimating flow velocity in rivers and streams. Periodic calibrations of current meters are important to ensure the quality of measurements, but the required testing facilities are complex and only available in a few institutions. However, advances in electronics and automation may contribute to developing simple and reliable calibration systems. Thus, this study aimed to develop an automated system for testing current meters, which consisted of a trapezoidal channel, a step motor, a tow car and a management system, composed of a supervisory application and microprocessed modules to control the motor and the data acquisition. Evaluations of the displacement velocity showed that it matched the reference value up to 1.85 m s-1 for a vertical-axis current meter and 2.3 m s-1 for a horizontal-axis one. The developed system showed reliability during tests, for both current meter movement and data acquisition. The management of the system based on the developed modules and the supervisory application improved its user interface, turning all the procedure into a simple task.

scholarly journals Developing a Measuring System for Monitoring the Thickness of the 6 m Wide HDPE/LDPE Polymer Geomembrane with Its Continuous Flow Using Automation Equipment

2021 ◽  
Vol 11 (21) ◽  
pp. 10045
Author(s):  
Tatyana Nikonova ◽  
Olga Zharkevich ◽  
Essim Dandybaev ◽  
Murat Baimuldin ◽  
Leonid Daich ◽  
...  
Keyword(s):  
Continuous Flow ◽  
High Density Polyethylene ◽  
Foreign Bodies ◽  
Automated System ◽  
Measuring System ◽  
Original Design ◽  
Software Complex ◽  
Automation Equipment ◽  
Production Conditions

As a result of R&D, a measuring system for controlling the thickness of the HDPE/LDPE (high-density polyethylene/low-density polyethylene) polymer geomembrane was developed using automation equipment. The relevance of this work consists of the development of a domestic, relatively inexpensive system for controlling the thickness of the HDPE/LDPE polymer geomembrane in production conditions based on modern equipment for enterprise automation. The scientific novelty consists of the use of original design solutions in the development of hardware and software complex mechanisms that allow controlling the thickness of the HDPE/LDPE polymer geomembrane layers along the entire width of the shaft, excluding deformation of the film as a result of foreign bodies entering during extrusion, cuts, monitoring the quality of the film in real time, as well as the possibility of analyzing the measured parameters in the database of the automated system.

scholarly journals Constructing Stereo Presentations of Textual Information on an Autostereoscopic Monitor

2019 ◽  
Author(s):  
Сергей Андреев ◽  
Sergey Andreev ◽  
Николь Бондарева ◽  
Nicole Bondareva
Keyword(s):  
Numerical Simulation ◽  
Scientific Research ◽  
Practical Experience ◽  
Stereo Image ◽  
Stereo Images ◽  
General Study ◽  
Textual Information ◽  
Stereoscopic Images ◽  
Depth Maps

This paper presents practical experience in constructing stereo presentations of texts and formulas on an autostereoscopic monitor in stereo presentations designed to display the results of numerical simulation. The task of constructing stereo images of texts and formulas is a structural subtask of a general study devoted to the development of methods and algorithms for constructing stereo presentations of the results of scientific research. This paper discusses the construction of stereoscopic images on an autostereoscopic monitor. The autostereoscopic monitor allows one to observe a stereo image without glasses, while ensuring the quality of the stereo image, which is not inferior to the quality of the stereo image, presented using a classic 3D projection stereo system. Various methods of obtaining stereo images supported by the monitor were tested, namely, the multi-view presentation of the object and the construction of depth maps. The results for both methods are presented.

scholarly journals New Technology of Cotton Sowing

2021 ◽  
Vol 58 (2) ◽  
pp. 296-303
Author(s):  
Kamaridin Urinovich Komilov, Aypara Djoldasova Kurbanova, Gafurjan Israilovich Muhamedov
Keyword(s):  
Raw Materials ◽  
New Technology ◽  
Practical Experience ◽  
Saline Soils ◽  
Crust Formation ◽  
Climatic Zones ◽  
Technical Feasibility ◽  
Technological Quality ◽  
The Republic

The possibility of using bulk waste of the chemical industry - phosphogypsum as a useful resource is considered. The results of scientific research and practical experience convincingly proved the technical feasibility and feasibility of using phosphogypsum in the national economy instead of traditional types of natural raw materials. A brief description of phosphogypsum, promising areas for its processing, and some statistics are presented. The article is about the use of chemical ameliorant based on phosphogypsum for effective feedingin various soil and climatic zones for cereals, vegetables, industrial and other crops, to increase the yield of cotton and the technological quality of its fiber. That the use of phosphogypsum as a chemical ameliorant improves the chemical, physical and water-physical properties of saline soils. The article describes a new technology of cotton sowing in the conditions of the Republic of Uzbekistan. The technology of soil treatment and methods of measuring for preventing crust formation are analyzed. The used mechanisms, units and are justified.

Sign in / Sign up

Export Citation Format

Share Document