scholarly journals Dynamic power dissipation of basic logic gates

2021 ◽  
Author(s):  
Katayoun Pourbahri
Keyword(s):  
Power Dissipation ◽  
Logic Gate ◽  
Load Condition ◽  
Order Relation ◽  
Logic Gates ◽  
Cmos Technology ◽  
Output Coupling ◽  
Basic Logic ◽  
Dynamic Power ◽  
Proposed Model

In this thesis, a model is proposed to estimate the dynamic power dissipation of CMOS logic gate that is loaded with identical logic gates. The proposed model is based on parsitic capacitance, input capacitance and input-to-output coupling capacitance of the gate. Also, model takes into account transistor width and has a second order relation with fanout. Using 0.13um CMOS technology and netlist (Cadence), basic logic gates are designed and loaded by identical basic logic gates. Basic logic gates dynamic power are simulated and compared with the calculated values of proposed model over a range of transistor sizes and capacitive load condition. The proposed model shows a good agreement with the simulated value of dynamic power dissipation of basic logic gates that are loaded by identical basic logic gates.

scholarly journals Dynamic power dissipation of basic logic gates

2021 ◽  
Author(s):  
Katayoun Pourbahri
Keyword(s):  
Power Dissipation ◽  
Logic Gate ◽  
Load Condition ◽  
Order Relation ◽  
Logic Gates ◽  
Cmos Technology ◽  
Output Coupling ◽  
Basic Logic ◽  
Dynamic Power ◽  
Proposed Model

In this thesis, a model is proposed to estimate the dynamic power dissipation of CMOS logic gate that is loaded with identical logic gates. The proposed model is based on parsitic capacitance, input capacitance and input-to-output coupling capacitance of the gate. Also, model takes into account transistor width and has a second order relation with fanout. Using 0.13um CMOS technology and netlist (Cadence), basic logic gates are designed and loaded by identical basic logic gates. Basic logic gates dynamic power are simulated and compared with the calculated values of proposed model over a range of transistor sizes and capacitive load condition. The proposed model shows a good agreement with the simulated value of dynamic power dissipation of basic logic gates that are loaded by identical basic logic gates.

Low Power High Speed MISTY1 Cryptography Approaches

2018 ◽  
Vol 27 (13) ◽  
pp. 1850200 ◽  
Author(s):  
Abdoul Rjoub ◽  
Ehab M. Ghabashneh
Keyword(s):  
Low Power ◽  
Power Dissipation ◽  
High Speed ◽  
Logic Gate ◽  
Logic Gates ◽  
Portable Devices ◽  
Silicon Area ◽  
Dynamic Power ◽  
Conventional Design ◽  
Reduction Approach

The demand for high performance, low power/secured handheld equipment increased the need for high speed/low energy and efficient encryption/decryption algorithms. Recently, efficient techniques were suggested to increase the standard of security as well as the speed of portable and handheld devices. Also, those techniques cause increment in the lifetime of battery by reducing the total silicon capacitance and minimizing the switching activity. This paper presents two approaches to reduce the number of logic gates at S7 and S9 of MISTY1 in order to reduce the total delay time, power dissipation and silicon area. The Logic Gate Reduction Approach (LGRA) reduces the number of logic gates by applying Boolean Algebra rules and simplifications, while the Duplicated Gate Reduction Approach (DGRA) removes the redundant XOR and AND logic gates which form the S7 and S9 blocks ciphers. The LGRA approach shows that the throughput enhanced by 21.1% compared to the conventional design, the silicon area reduced by 26.8%, while the dynamic power dissipation is reduced by 21.7% on average. The DGRA approach shows that the throughput enhanced by 3.8% compared to the conventional design, the silicon area reduced by 31.7%, while the dynamic power dissipation is reduced by 27% on average. As a result, the proposed approaches could be fit for next generation of handheld and portable devices.

scholarly journals Reduction of Power Dissipation in Dynamic BiCMOS Logic Gates by Transistor Reordering

VLSI Design ◽  
2002 ◽  
Vol 15 (2) ◽  
pp. 547-553
Author(s):  
S. M. Rezaul Hasan ◽  
Yufridin Wahab
Keyword(s):  
Power Dissipation ◽  
Figure Of Merit ◽  
Low Voltage ◽  
Logic Gates ◽  
Base Layer ◽  
Cmos Process ◽  
Silicon Area ◽  
Dynamic Power ◽  
Analog Cmos ◽  
Power Delay Product

This paper explores the deterministic transistor reordering in low-voltage dynamic BiCMOS logic gates, for reducing the dynamic power dissipation. The constraints of load driving (discharging) capability and NPN turn-on delay for MOSFET reordered structures has been carefully considered. Simulations shows significant reduction in the dynamic power dissipation for the transistor reordered BiCMOS structures. The power-delay product figure-of-merit is found to be significantly enhanced without any associated silicon-area penalty. In order to experimentally verify the reduction in power dissipation, original and reordered structures were fabricated using the MOSIS 2 μm N-well analog CMOS process which has a P-base layer for bipolar NPN option. Measured results shows a 20% reduction in the power dissipation for the transistor reordered structure, which is in close agreement with the simulation.

scholarly journals Synthesis of composite logic gate in QCA embedding underlying regular clocking

2021 ◽  
Vol 34 (1) ◽  
pp. 115-131
Author(s):  
Jayanta Pal ◽  
Dhrubajyoti Bhowmik ◽  
Ayush Singh ◽  
Apu Saha ◽  
Bibhash Sen
Keyword(s):  
Symmetric Functions ◽  
Logic Gate ◽  
Logic Gates ◽  
Cmos Technology ◽  
Dissipated Energy ◽  
Circuit Realization ◽  
Alternative Technologies ◽  
Gate Count ◽  
Majority Voter ◽  
Cost Efficient

Quantum-dot Cellular Automata (QCA) has emerged as one of the alternative technologies for current CMOS technology. It has the advantage of computing at a faster speed, consuming lower power, and work at Nano- Scale. Besides these advantages, QCA logic is limited to its primitive gates, majority voter and inverter only, results in limitation of cost-efficient logic circuit realization. Numerous designs have been proposed to realize various intricate logic gates in QCA at the penalty of non-uniform clocking and improper layout. This paper proposes a Composite Gate (CG) in QCA, which realizes all the essential digital logic gates such as AND, NAND, Inverter, OR, NOR, and exclusive gates like XOR and XNOR. Reportedly, the proposed design is the first of its kind to generate all basic logic in a single unit. The most striking feature of this work is the augmentation of the underlying clocking circuit with the logic block, making it a more realistic circuit. The Reliable, Efficient, and Scalable (RES) underlying regular clocking scheme is utilized to enhance the proposed design?s scalability and efficiency. The relevance of the proposed design is best cited with coplanar implementation of 2-input symmetric functions, achieving 33% gain in gate count and without any garbage output. The evaluation and analysis of dissipated energy for both the design have been carried out. The end product is verified using the QCADesigner2.0.3 simulator, and QCAPro is employed for the study of power dissipation.

scholarly journals Low Power VLSI Design Techniques: A Review

2021 ◽  
Vol 23 (11) ◽  
pp. 172-183
Author(s):  
Ketan J. Raut ◽  
◽  
Abhijit V. Chitre ◽  
Minal S. Deshmukh ◽  
Kiran Magar ◽  
...  
Keyword(s):  
Low Power ◽  
Power Dissipation ◽  
High Speed ◽  
Vlsi Design ◽  
Cmos Technology ◽  
Vlsi Circuits ◽  
Optimization Techniques ◽  
Battery Life ◽  
Dynamic Power ◽  
Cmos Vlsi

Since CMOS technology consumes less power it is a key technology for VLSI circuit design. With technologies reaching the scale of 10 nm, static and dynamic power dissipation in CMOS VLSI circuits are major issues. Dynamic power dissipation is increased due to requirement of high speed and static power dissipation is at much higher side now a days even compared to dynamic power dissipation due to very high gate leakage current and subthreshold leakage. Low power consumption is equally important as speed in many applications since it leads to a reduction in the package cost and extended battery life. This paper surveys contemporary optimization techniques that aims low power dissipation in VLSI circuits.

scholarly journals SiAlS (Simple Alarm System) Based Light Dependent Resistor (LDR) and Basic Logic Gate as an Attempt to Preventing on Helmet Theft

2019 ◽  
Vol 2 ◽  
pp. 229-230
Author(s):  
Aji Rahmadi ◽  
Adi Ahmad Dimisa ◽  
Asep Kurniawan ◽  
Frida Agung Rakhmadi
Keyword(s):  
Success Rate ◽  
Logic Gate ◽  
Logic Gates ◽  
Alarm System ◽  
Basic Logic ◽  
Alarm Systems ◽  
Working Principle ◽  
Three Stages ◽  
Rearview Mirror

Research on the Light Dependent Resistor (LDR) and the basic logic gates in the designing and manufacturing SiAlS (Simple Alarm System) as an attempt to Prevent theft helmet on had been done. This research was conducted aiming to create and Characterize alarm system. This study was intended to Prevent theft of the helmet. The method used in this research is divided into three stages, designing, manufacturing and testing. The working principle of this alarm system is when the helmet is mounted in the rearview mirror, the LDR will be closed so that the resistance increases the which causes the alarm to Become inactive. However, if the helmet is taken, the alarm will activate because The resistance decreases. However, the alarm will not work if the sensor cable is cut by the thief. To Overcome this problem, additional circuits are made using a NOT logic gates. The results of this research are prototypes in testing alarm systems and alarm systems get a 100% success rate. The advantage of this alarm systems are cheap and simple, Because it does not use a microcontroller and can be made individually.

A circuit level variability prediction of basic logic gates in advanced trigate CMOS technology

2014 ◽  
Author(s):  
E. R. Hsieh ◽  
C. M. Hung ◽  
T. Y. Wang ◽  
Steve S. Chung ◽  
R. M. Huang ◽  
...  
Keyword(s):  
Logic Gates ◽  
Cmos Technology ◽  
Basic Logic

scholarly journals Design and Implementation of New Coplanar FA Circuits without NOT Gate and Based on Quantum-Dot Cellular Automata Technology

2021 ◽  
Vol 11 (24) ◽  
pp. 12157
Author(s):  
Mohsen Vahabi ◽  
Pavel Lyakhov ◽  
Ali Newaz Bahar ◽  
Khan A. Wahid
Keyword(s):  
Cellular Automata ◽  
Quantum Dot ◽  
Logic Gate ◽  
Logic Gates ◽  
Full Adder ◽  
Cmos Technology ◽  
Ultra Low Power ◽  
Xor Gate ◽  
Design Complexity ◽  
Quantum Dot Cellular Automata

The miniaturization of electronic devices and the inefficiency of CMOS technology due to the development of integrated circuits and its lack of responsiveness at the nanoscale have led to the acquisition of nanoscale technologies. Among these technologies, quantum-dot cellular automata (QCA) is considered one of the possible replacements for CMOS technology because of its extraordinary advantages, such as higher speed, smaller area, and ultra-low power consumption. In arithmetic and comparative circuits, XOR logic is widely used. The construction of arithmetic logic circuits using AND, OR, and NOT logic gates has a higher design complexity. However, XOR gate design has a lower design complexity. Hence, the efficient and optimized XOR logic gate is very important. In this article, we proposed a new XOR gate based on cell-level methodology, with the expected output achieved by the influence of the cells on each other; this design method caused less delay. However, this design was implemented without the use of inverter gates and crossovers, as well as rotating cells. Using the proposed XOR gate, two new full adder (FA) circuits were designed. The simulation results indicate the advantage of the proposed designs compared with previous structures.

scholarly journals A RET-supported logic gate combinatorial library to enable modeling and implementation of intelligent logic functions

2016 ◽  
Vol 7 (3) ◽  
pp. 1853-1861 ◽  
Author(s):  
Ru-Ru Gao ◽  
Shuo Shi ◽  
Ying Zhu ◽  
Hai-Liang Huang ◽  
Tian-Ming Yao
Keyword(s):  
Combinatorial Library ◽  
Logic Gate ◽  
Logic Gates ◽  
Basic Logic ◽  
Parity Checker ◽  
Nor Gate ◽  
Logic Functions

A logic gate combinatorial library, including basic logic gates, a single three-input NOR gate, and combinatorial gates to realize intelligent logic functions (keypad-lock, parity checker) is constructed.

Towards the Design of Cost-efficient Generic Register Using Quantum-dot Cellular Automata

2020 ◽  
Vol 10 (4) ◽  
pp. 534-547
Author(s):  
Chiradeep Mukherjee ◽  
Saradindu Panda ◽  
Asish K. Mukhopadhyay ◽  
Bansibadan Maji
Keyword(s):  
Cellular Automata ◽  
Quantum Dot ◽  
Power Dissipation ◽  
Cmos Technology ◽  
Oxide Semiconductor ◽  
Digital Data ◽  
Design Parameters ◽  
Flip Flop ◽  
Quantum Dot Cellular Automata ◽  
Cost Efficient

Background: The advancement of VLSI in the application of emerging nanotechnology explores quantum-dot cellular automata (QCA) which has got wide acceptance owing to its ultra-high operating speed, extremely low power dissipation with a considerable reduction in feature size. The QCA architectures are emerging as a potential alternative to the conventional complementary metal oxide semiconductor (CMOS) technology. Experimental: Since the register unit has a crucial role in digital data transfer between the electronic devices, such study leading to the design of cost-efficient and highly reliable QCA register is expected to be a prudent area of research. A thorough survey on the existing literature shows that the generic models of Serial-in Serial Out (SISO), Serial-in-Parallel-Out (SIPO), Parallel-In- Serial-Out (PISO) and Parallel-in-Parallel-Out (PIPO) registers are inadequate in terms of design parameters like effective area, delay, O-Cost, Costα, etc. Results: This work introduces a layered T gate for the design of the D flip flop (LTD unit), which can be broadly used in SISO, SIPO, PISO, and PIPO register designs. For detection and reporting of high susceptible errors and defects at the nanoscale, the reliability and defect tolerant analysis of LTD unit are also carried out in this work. The QCA design metrics for the general register layouts using LTD unit is modeled. Conclusion: Moreover, the cost metrics for the proposed LTD layouts are thoroughly studied to check the functional complexity, fabrication difficulty and irreversible power dissipation of QCA register layouts.

Sign in / Sign up

Export Citation Format

Share Document