scholarly journals Assessment of Asphalt Binders and Hot Mix Asphalt Modified with Nanomaterials

2019 ◽  
Author(s):  
Hameedullah Raufi ◽  
Ali Topal ◽  
Burak Sengoz ◽  
Derya Kaya
Keyword(s):  
High Temperature ◽  
Asphalt Binder ◽  
Active Surface ◽  
Mix Design ◽  
Asphalt Binders ◽  
Active Surface Area ◽  
Test Results ◽  
Moisture Susceptibility ◽  
Research Findings ◽  
Temperature Susceptibility

In the recent times, asphalt binder modification has emerged an inevitable alternative in the paving industry to ensure better performing pavements against the distresses caused by common factors such as; moisture susceptibility and high-temperature sensitivity of asphalt binders. Nanomaterials, as asphalt-modifiers, have proved to be the most promising materials in the industry owing to their higher active surface area and small particle size. This study was devoted to assessing the modification influence of three different types of nanomaterials, including nano-Bentonite, nano-CaCO3, and ZycoTherm, on the properties of asphalt binder and HMA. Conventional and rheological tests on asphalt binders, as well as, Marshall mix design and modified Lottman test on laboratory-prepared HMA specimens were conducted in order to signify the influence of nanomodification. The research findings suggested that nanomaterials can potentially enhance the high-temperature susceptibility resistance, storage stability, and rheological properties of asphalt binder samples. Mix design results revealed that the optimum binder contents decreased and Marshall stabilities were slightly improved with nanomodification. Moreover, the modified Lottman test results indicated that 0.1 % of ZycoTherm increased the TSR by 22 % as compared to the control mixture that infers its efficiency in terms of improving the HMA resistance against the moisture-induced damages.

scholarly journals Effects of Asphalt Binder Modifying with Polypropylene on Moisture Susceptibility of Asphalt Mixtures with Thermodynamically Concepts

2018 ◽  
Author(s):  
Gholam Hossein Hamedi ◽  
Ali Reza Azarhoosh ◽  
Mojtaba Khodadadi
Keyword(s):  
Free Energy ◽  
Asphalt Binder ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Test Results ◽  
Cohesion Strength ◽  
Adhesion Bond ◽  
Moisture Susceptibility ◽  
Dry Conditions ◽  
Control Samples

In this study, the effect of using Polypropylene (PP) as an antistripping additive of asphalt mixtures is investigated. Here, the moisture susceptibility of asphalt mixtures is evaluated by determining the micro-mechanisms using the surface free energy (SFE) concept. The adhesion bond between the aggregate and asphalt binder and the cohesion strength of the asphalt binder are considered as the main factors that affect moisture damage of asphalt mixtures. Test results indicate that the use of PP improves the resistance of asphalt mixtures in both wet and dry conditions. Also, the results of the SFE tests showed that the modifying asphalt binder with PP increases free energy of adhesion that will improve adhesion resistance between asphalt binder-aggregates. The amount of debonding energy in the samples which are modified with PP is lower than the control samples. This shows that by modifying asphalt binders, the tendency of asphalt binder-aggregate stripping can be reduced. The results show the total SFE of the asphalt binders of the modified samples have more free energy rather than the control samples. This phenomenon shows that failure in the asphalt binder film and cohesion failure will be happened more rarely.

scholarly journals Impact of Graphene Oxide on Zero Shear Viscosity, Fatigue Life and Low-Temperature Properties of Asphalt Binder

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3073
Author(s):  
Abbas Mukhtar Adnan ◽  
Chaofeng Lü ◽  
Xue Luo ◽  
Jinchang Wang
Keyword(s):  
Graphene Oxide ◽  
Fatigue Life ◽  
Low Temperature ◽  
Shear Viscosity ◽  
Storage Stability ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Test Results ◽  
Zero Shear Viscosity ◽  
Modified Asphalt

This study has investigated the impact of graphene oxide (GO) in enhancing the performance properties of an asphalt binder. The control asphalt binder (60/70 PEN) was blended with GO in contents of 0%, 0.5%, 1%, 1.5%, 2%, and 2.5%. The permanent deformation behavior of the modified asphalt binders was evaluated based on the zero shear viscosity (ZSV) parameter through a steady shear test approach. Superpave fatigue test and the linear amplitude sweep (LAS) method were used to evaluate the fatigue behavior of the binders. A bending beam rheometer (BBR) test was conducted to evaluate the low-temperature cracking behavior. Furthermore, the storage stability of the binders was investigated using a separation test. The results of the ZSV test showed that GO considerably enhanced the steady shear viscosity and ZSV value, showing a significant contribution of the GO to the deformation resistance; moreover, GO modification changed the asphalt binder’s behavior from Newtonian to shear-thinning flow. A notable improvement in fatigue life was observed with the addition of GO to the binder based on the LAS test results and Superpave fatigue parameter. The BBR test results revealed that compared to the control asphalt, the GO-modified binders showed lower creep stiffness (S) and higher creep rate (m-value), indicating increased cracking resistance at low temperatures. Finally, the GO-modified asphalt binders exhibited good storage stability under high temperatures.

Dynamic Properties of Asphalt Binders Containing Fiber Modifiers

2010 ◽  
Vol 97-101 ◽  
pp. 724-727 ◽  
Author(s):  
Qun Shan Ye ◽  
Shao Peng Wu
Keyword(s):  
Shear Test ◽  
Dynamic Properties ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Test Results ◽  
Modified Asphalt ◽  
Rate Versus ◽  
Complex Shear ◽  
Creep Modulus ◽  
Phase Angles

Dynamic shear test and creep shear test were employed to investigate the dynamic properties of various fiber modified asphalt binders with the fiber content of 1.0%. The test results indicate that complex shear modulus of asphalt binders containing fibers are increased while the phase angles are decreased greatly, which implies that the asphalt binder is reinforced by the addition of fibers and the elastic property of asphalt binder is improved significantly, especially at high frequency levels. The total strain during loading period and the residual strain after the creep shear test of asphalt binders are reduced greatly by the addition of fibers. Furthermore, the creep modulus of fiber modified asphalt binders is increased and the development rate versus loading time of creep modulus is decreased.

Effectiveness of Loaded Wheel Tracking Test to Ascertain Moisture Susceptibility of Asphalt Mixtures

2021 ◽  
pp. 036119812110363
Author(s):  
Moses Akentuna ◽  
Louay N. Mohammad ◽  
Sanchit Sachdeva ◽  
Samuel B. Cooper ◽  
Samuel B. Cooper
Keyword(s):  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Moisture Damage ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Creep Recovery ◽  
Moisture Susceptibility ◽  
Freeze Thaw ◽  
Wheel Tracking ◽  
Mixture Samples

Moisture damage of asphalt mixtures is a major distress affecting the durability of asphalt pavements. The loaded wheel tracking (LWT) test is gaining popularity in determining moisture damage because of its ability to relate laboratory performance to field performance. However, the accuracy of LWT’s “pass/fail” criteria for screening mixtures is limited. The objective of this study was to evaluate the capability of the LWT test to identify moisture susceptibility of asphalt mixtures with different moisture conditioning protocols. Seven 12.5 mm asphalt mixtures with two asphalt binder types (unmodified PG 67-22 and modified PG 70-22), and three aggregate types (limestone, crushed gravel, and a semi-crushed gravel) were utilized. Asphalt binder and mixture samples were subjected to five conditioning levels, namely, a control; single freeze–thaw-; triple freeze–thaw-; MiST 3500 cycles; and MiST 7000 cycles. Frequency sweep at multiple temperatures and frequencies, and multiple stress creep recovery tests were performed to evaluate asphalt binders. LWT test was used to evaluate the asphalt mixture samples. Freeze–thaw and MiST conditioning resulted in an increase in stiffness in the asphalt binders as compared with the control. Further, freeze–thaw and MiST conditioning resulted in an increase in rut depth compared with the control asphalt mixture. The conditioning protocols evaluated were effective in exposing moisture-sensitive mixtures, which initially showed compliance with Louisiana asphalt mixture design specifications.

scholarly journals Performance of Warm-Mixed Flame Retardant Modified Asphalt Binder

2019 ◽  
Vol 9 (7) ◽  
pp. 1491
Author(s):  
Ruixia Li ◽  
Kaiwei Zhang ◽  
Jiahui Wu ◽  
Wenjuan Liu
Keyword(s):  
High Temperature ◽  
Flame Retardant ◽  
Performance Test ◽  
Asphalt Binder ◽  
Negative Influence ◽  
Viscosity Reduction ◽  
Asphalt Binders ◽  
Index Test ◽  
Flame Resistance ◽  
Limiting Oxygen Index

In order to analyze the effect of flame retardant and warm mix asphalt (WMA) additives-Sasobit on the flame-retardant performance and pavement performance of asphalt binder, the limiting oxygen index test, conventional performance test, and Superpave evaluation index tests were performed on asphalt binders in the study. The test results show that flame retardant can effectively improve the flame resistance of asphalt binder, while Sasobit has a certain combustion-supporting effect. Therefore, when warm-mixed flame-retardant technology is applied, the concentration of Sasobit should be controlled appropriately. These two modifiers can significantly enhance the high-temperature performance of asphalt binder, but both of them have a slight negative influence on the low-temperature cracking resistance. Sasobit can substantially reduce the high-temperature viscosity of asphalt binder, which helps to improve the construction workability of asphalt binder, while the flame retardant adversely affects the viscosity reduction effect of Sasobit to a certain extent, but the overall impact is not large.

scholarly journals Experimental Study to Determine the Most Preferred Additive for Improving Asphalt Performance Using Polypropylene, Crumb Rubber, and Tafpack Super in Medium and High-Temperature Range

2019 ◽  
Vol 9 (8) ◽  
pp. 1567 ◽  
Author(s):  
Huang Xiaoming ◽  
Ismail Bakheit Eldouma
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Mechanical Performance ◽  
Asphalt Binder ◽  
Crumb Rubber ◽  
Asphalt Binders ◽  
Modified Bitumen ◽  
Asphalt Modification ◽  
Rotational Viscosity ◽  
Asphalt Performance

The overall objectives of this study were to determine the most appropriate additive for improving the physical properties and the medium- and high-temperature performances (mechanical performance) of asphalt binders. Three different types of modified binders were prepared: crumb rubber modifier (CRM), polypropylene (PP), and tafpack super (TPS), which had concentrations of 2%, 3%, 3.5%, and 4% by weight of asphalt binder, for each modifier. Their physical and rheological properties were evaluated by applying various tests such as ductility, rotational viscosity, toughness, and tenacity, as well as the dynamic shear rheometer (DSR) test. As a result, the physical properties of the modified bitumen binders were compared, as were the medium- and high-temperature performances (mechanical performance), which had temperatures of 58, 64, 70, 76, 82, and 88 °C, respectively. This was how the most appropriate modifier was determined. The results demonstrated that the asphalt binder properties significantly improved by utilizing CRM followed by PP and TPS modifiers. The increase in the rutting parameter (G*/sin(δ)) after asphalt modification indicated its excellent performance at both medium- and high-temperatures. Lastly, the CRM was determined as the most preferred additive because of its positive effect on the physical properties and enhancement of the medium- and high-temperature performance (mechanical performance).

Rheological Properties of High Grade Asphalt and its Mixture

2014 ◽  
Vol 599 ◽  
pp. 244-247 ◽  
Author(s):  
Qun Shan Ye ◽  
Chang Jian Ye ◽  
Zhi Lin Sun
Keyword(s):  
Rheological Properties ◽  
Dynamic Modulus ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Binders ◽  
Test Results ◽  
Complex Shear Modulus ◽  
Complex Shear ◽  
Dynamic Modulus Test

Viscosity test, dynamic shear test, dynamic modulus test and creep test were conducted to investigate the rheological properties of high modulus asphalt and its mixture. Test results indicated that the viscosity of hard grade asphalt could be increased when compared with the ordinary asphalt, especially at high temperatures. The complex shear modulus and dynamic modulus of hard-grade asphalt binder and its mixture were increased, which implied that the stiffness of them was enhanced. Furthermore, the elastically portions for viscoelastic property of asphalt binders were increased, which resulted in the reduction of phase angle for hard grade asphalt binders and mixtures. The rutting parameter for hard-grade asphalt mixture was increased remarkably, which revealed that the resistance to permanent deformation could be significantly improved for hard grade asphalt mixture.

Adhesion Loss in Antistripping Agent Treated Asphalt Binders due to Moisture

2013 ◽  
Vol 690-693 ◽  
pp. 1553-1567 ◽  
Author(s):  
Md Arifuzzaman ◽  
Rafiqul A. Tarefder
Keyword(s):  
Statistical Tests ◽  
Asphalt Binder ◽  
Point Of View ◽  
Asphalt Binders ◽  
Test Results ◽  
Statistical Point ◽  
P Values ◽  
Modified Asphalt ◽  
Different Types

This study evaluates the role of antistripping agents to resist moisture-induced damage in asphalt binders. A total of five different types of antistripping agents are used. Plastomer and elastomer modified asphalt binders are used to modify the original base binder. Functionalized and non-functionalized AFM tips are used to determine adhesion in asphalt. With-CH3 tip, lime is found to be the most effective to protect moisture damage in asphalt binder as the adhesion loss is almost zero. The statistical tests show the Pearson values are very close to-1 that indicates a good correlation among the variables. Also the p-values are well below the prescribed value of 0.2% that indicates the test results to be significant from the statistical point of view.

scholarly journals Effect of Recycled Shell Waste as a Modifier on the High- and Low-Temperature Rheological Properties of Asphalt

2021 ◽  
Vol 13 (18) ◽  
pp. 10271
Author(s):  
Yuchen Guo ◽  
Xuancang Wang ◽  
Guanyu Ji ◽  
Yi Zhang ◽  
Hao Su ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Rheological Properties ◽  
Low Temperatures ◽  
High Speed ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Temperature Performance

The deteriorating ecological environment and the concept of sustainable development have highlighted the importance of waste reuse. This article investigates the performance changes resulting from the incorporation of shellac into asphalt binders. Seashell powder-modified asphalt was prepared with 5%, 10%, and 15% admixture using the high-speed shear method. The microstructure of the seashell powder was observed by scanning electron microscope test (SEM); the physical-phase analysis of the seashell powder was carried out using an X-ray diffraction (XRD) test; the surface characteristics and pore structure of shellac were analyzed by the specific surface area Brunauer-Emmett-Teller (BET) test; and Fourier infrared spectroscopy (FTIR) qualitatively analyzed the composition and changes of functional groups of seashell powder-modified asphalt. The conventional performance index of seashell powder asphalt was analyzed by penetration, softening point, and ductility (5 °C) tests; the effect of seashell powder on asphalt binder was studied using a dynamic shear rheometer (DSR) and bending beam rheometer (BBR) at high and low temperatures, respectively. The results indicate the following: seashell powder is a coarse, porous, and angular CaCO3 bio-material; seashell powder and the asphalt binder represent a stable physical mixture of modified properties; seashell powder improves the consistency, hardness, and high-temperature performance of the asphalt binder but weakens the low-temperature performance of it; seashell powder enhances the elasticity, recovery performance, and permanent deformation resistance of asphalt binders and improves high-temperature rheological properties; finally, seashell powder has a minimal effect on the crack resistance of asphalt binders at very low temperatures. In summary, the use of waste seashells for recycling as bio-modifiers for asphalt binders is a practical approach.

scholarly journals Laboratory Evaluation on Performance of Fiber-Modified Asphalt Mixtures Containing High Percentage of RAP

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Yuefeng Zhu ◽  
Yanwei Li ◽  
Chundi Si ◽  
Xiaote Shi ◽  
Yaning Qiao ◽  
...  
Keyword(s):  
Low Temperature ◽  
Asphalt Binder ◽  
Temperature Stability ◽  
Asphalt Mixtures ◽  
Self Healing ◽  
Test Results ◽  
Moisture Susceptibility ◽  
Modified Asphalt ◽  
Modified Binders ◽  
Different Types

In recent years, the significant demand for sustainable paving materials has led to a rapid increase in the utilization of reclaimed asphalt pavement (RAP) materials. When RAP is mixed with virgin asphalt concrete, particularly when its percentage is high, performance of the binder and asphalt concrete can be adversely affected. For this reason, different types of additives need to be identified and evaluated beforehand to mitigate the adverse effects. In this study, different types of fiber materials were identified and selected as binder/mixture additives, including lignin fiber (LF), polyester fiber (PF), and basalt fiber (BF). Various samples of fiber-modified binders and asphalt mixtures with different RAP contents (0%, 20%, and 40%) were prepared and were evaluated using two sets of laboratory testing: (i) dynamic shear rheometer (DSR) and bending beam rheometer (BBR) tests were performed to study the rheological properties of fiber-modified binders; (ii) the wheel tracking test, bending creep test, moisture susceptibility test, fatigue test, and self-healing fatigue test were conducted to characterize the laboratory properties of fiber-modified RAP mixtures. Test results for the modified binders show that the BF-modified binder has the greatest positive effect on the high-temperature performance of the asphalt binder, followed by PF- and LF-modified binders. However, the virgin asphalt shows the best low-temperature property than the fiber-modified asphalt binder. Test results for the whole RAP mixtures show that all fibers have a significant effect on the properties (including high- and low-temperature stability, moisture susceptibility, fatigue, and self-healing ability) of RAP mixtures. Among them, adding BF shows the greatest improvement in high-temperature stability, fatigue resistance, and self-healing ability of RAP mixtures. LF is found to significantly enhance low-temperature properties, and PF can greatly improve the resistance to moisture damage of RAP mixtures. For high percentage of RAP using on sites, adding multiple additives may further enhance its durability.

Sign in / Sign up

Export Citation Format

Share Document