scholarly journals KARAKTERISTIK TEPUNG SORGUM TERMODIFIKASI DENGAN PROSES FERMENTASI DENGAN MENGGUNAKAN YEAST INDIGENOUS SORGUM

2022 ◽  
Vol 6 (6) ◽  
Author(s):  
Zulianatul Hidayah ◽  
Rikka Welhelmina Sir
Keyword(s):  
Water Absorption ◽  
Water Content ◽  
Bulk Density ◽  
Starch Content ◽  
Physicochemical Characteristics ◽  
Fermentation Time ◽  
Swelling Power ◽  
Sorghum Flour ◽  
Codex Standard ◽  
Range Test

ABSTRACTThe purpose of this study was to examine the physicochemical characteristics of fermented sorghum flour using indigenous sorghum yeast. The study used a completely randomized factorial design with various fermentation times (24, 48, 72 hours) as the first factor and the concentration of indigenous sorghum yeast starter (2.5%, 5%, 7.5%, 10%, 12.5%, and 15% w/v) as the second factor in three replications. Parameters observed were physicochemical characteristics including starch content, water content, swelling power, water absorption, and bulk density. The data obtained were analyzed using analysis of variance (ANOVA) (P<0.05) and Duncan's Multiple Range Test (DMRT). The results show that the best-fermented sorghum flour was obtained at 72 hours of fermentation time with a 5% starter. The sorghum flour has a starch content of 74.8%, water content of 10.97%, swelling power of 15.44 g/g, water absorption capacity of 67.58%, and bulk density 0.6 g/ml. Modification by fermentation using indigenous sorghum yeast can improve the physical and chemical properties of sorghum flour. Based on the nutritional content of sorghum flour, it met the quality requirements of Codex Standard 173-1989 in ash, protein, fat, crude fiber, and carbohydrate contents.Keywords:sorghum, modified, yeast indigenous, phisycal and chemical characteristik.ABSTRAKTujuan penelitian ini adalah untuk mengkaji karakteristik fisikokimia tepung sorgum hasil fermentasi dengan menggunakan yeast indigenous sorgum. Penelitian dilakukan dengan menggunakan rancangan acak lengkap pola faktorial dengan lama fermentasi (24, 48, 72 jam) sebagai faktor pertama dan konsentrasi starter yeast indigenous sorgum (2,5%, 5%, 7,5% dan 10%, 12,5% dan 15% b/v) sebagai faktor kedua, menggunakan 3 ulangan. Parameter yang diamati adalah karakteristik fisikokimia meliputi kadar pati, kadar air, sweeling power, daya serap air dan densitas Kamba. Data yang diperoleh dianalisis dengan menggunakan Analisis Ragam (ANOVA) (P<0,05) dan uji lanjut Duncan Multiple Range Test (DMRT). Hasil penelitian menunjukkan bahwa tepung sorghum terfermentasi terbaik didapatkan pada perlakuan lama fermentasi 72 jam dengan jumlah starter sebanyak 5%. Karakterisitik tepung sorgum ynag dimiliki adalah kadar pati 74,8%, kadar air 10,97%, swelling power 15,44 g/g, daya serap air 67,58% dan densitas kamba 0,6 g/ml. Modifikasi dengan fermentasi menggunakan yeast indigenous sorgum mampu memperbaiki sifat fisik dan kimia tepung sorgum. Berdasarkan kandungan gizi pada tepung sorgum telah memenuhi syarat mutu Codex Standard 173-1989 pada kadar, abu, protein, lemak, serat kasar dan karbohidrat.Kata kunci: sorgum, modifikasi, yeast indigenous, sifat fisikokimia

scholarly journals FORMULASI, KARAKTERISASI, DAN OPTIMASI WAKTU REHIDRASI PRODUK NASI KUNING INSTAN

2020 ◽  
Vol 17 (2) ◽  
pp. 95
Author(s):  
Sri Widowati ◽  
Nur Asni ◽  
Farida Nuraeni
Keyword(s):  
Water Absorption ◽  
Water Content ◽  
Amylose Content ◽  
Starch Content ◽  
Physicochemical Characteristics ◽  
Testing Time ◽  
Anova Analysis ◽  
One Way Anova

<p>Nasi kuning instan menjadi salah satu alternatif menu sarapan pagi karena memiliki waktu penyajian yang singkat. Tujuan penelitian ini adalah untuk menghasilkan formula terbaik produk nasi kuning instan dengan waktu rehidrasi yang optimum dan menentukan karakteristik fisikokimia produk nasi kuning instan. Faktor yang diuji adalah formulasi bumbu (kontrol dengan menggunakan bumbu instan, formula A menggunakan 1 paket bumbu nasi kuning, formula B menggunakan 1,25 paket bumbu nasi kuning dan formula C menggunakan 1,50 paket bumbu nasi kuning) dan kadar amilosa beras (rendah, sedang dan tinggi). Hasil uji analisis <em>one way anova</em> menunjukkan bahwa antara formulasi dan kadar amilosa beras berbeda secara nyata dari karakteristik fisikokimia nasi kuning instan (p&lt;0,05). Formula dan nasi kuning instan yang terpilih adalah formula 1,25 paket bumbu nasi kuning dari beras Sintanur dengan kadar amilosa rendah adalah waktu rehidrasi 4,59 menit, rendemen 90,23%, volume pengembangan 30,89%, daya serap air 49,68%, densitas kamba 0,62 g/mL, nilai °<em>Hue</em> diatas 90%, dan nilai kekerasan 74,03%. Produk ini mengandung kadar air 8,07%, abu 3,35%, protein 9,19%, lemak 2,08%, karbohidrat 76,32%, dan kadar pati 64,11 %.</p><p> </p><p><strong>Formulation, Characterization, and Optimization of the Rehydration of Yellow Rice Instant.</strong></p><p>Instant yellow rice is an alternative to breakfast because it has a short testing time. The purpose of this study was to produce the best formula for instant yellow rice products with optimum rehydration time and determine the physicochemical characteristics of instant yellow rice products. Factors tested were seasoning formulations (control using instant seasoning, formula A using 1 package of yellow rice seasoning, formula B using 1,25 package of yellow rice seasoning and formula C using 1,50 packages of yellow rice seasoning) and amylose content of rice (low, medium and high). One way ANOVA analysis results showed that between the formulation and amylose content of rice was significantly different from the physicochemical characteristics of instant yellow rice (p &lt;0,05). The formula and instant yellow rice selected were formula 1,25 package of yellow rice seasoning from Sintanur rice with low amylose content, rehydration time 4,59 minutes, yield 90,23%, development volume 30,89%, water absorption 49,68%, kamba density 0,62 g/mL , the ° Hue value is above 90%, and the hardness value is 74,03%. This product contains 8,07% water content, 3,35% ash, 9,19% protein, 2,08% fat, 76,32% carbohydrate, and 64,11% starch content.</p>

scholarly journals KARAKTERISTIK FISIK, KIMIA DAN ORGANOLEPTIK MIE KERING PADA BERBAGAI RASIO TEPUNG BONGGOL PISANG KEPOK

AGROINTEK ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 82
Author(s):  
Asnani Asnani ◽  
Abdul Rahim ◽  
Ifall Ifall
Keyword(s):  
Water Absorption ◽  
Water Content ◽  
Wheat Flour ◽  
Sensory Analysis ◽  
Starch Content ◽  
Weight Basis ◽  
Chemical Characteristics ◽  
Group Design ◽  
Physical Chemical ◽  
Physical And Chemical

<em>This work deals with the effect of banana (sweet plaintain or ‘kepok’ variety) hump flour substituted to wheat flour in the making of noodle, on physical, chemical, and sensory characteristics of noodle.  A completely randomized was employed, with three replicates. Sensory analysis was conducted according to randomized group design. Four proportions of banana hump to wheat flour (10:90, 20:80, 30:70, and 40:60, weight basis) was studied. Results showed that the best physical and chemical characteristics was shown by noodle made from 10:90 proportion of banana hump to wheat flour, with 4.59% water absorption, 0.57% cooking loss, 10.37% water content, 34.21% starch content. However, result of sensory analysis suggested that the most liked noodle was that made from flour proportion of 20:80 with ‘like’ for colour, ‘like very much’ for aroma, ‘like’ for texture, ‘like’ for taste, and ‘like’ for overall preference</em>

scholarly journals Impacts of Cooking Times (Steaming and Cooking on Embers) on Some Physico-Functional Parameters of Yam (Dioscorea bulbifera) Flours Cv Dougon-won Consumed in Côte d'Ivoire

2019 ◽  
pp. 1-13
Author(s):  
Gbocho Serge Elvis Ekissi ◽  
Jacques Yapi Achy ◽  
Martin Tanoh Kouadio ◽  
Bedel Jean Fagbohoun ◽  
Lucien Patrice Kouamé
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Water Solubility ◽  
Foam Stability ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Functional Parameters ◽  
Swelling Power ◽  
Dioscorea Bulbifera ◽  
Cooking Times

Impacts of cooking times (steaming and cooking on embers) on some physico-functional parameters of yam (D. bulbifera) flours cv Dougou-won were determined during 10, 20 and 30 min. Results showed that steaming and cooking on embers increased significantly (P <0.05) the dispersibility (D), water absorption capacity (WAC), paste clarity (PC), water solubility index (WSI), swelling power (SP), least gelation capacity (LGC) and solubility (S) but decreased significantly (P <0.05) foam capacity (FC), wettability (W) and foam stability (FS) of flours (D. bulbifera) cv Dougou-won. Steaming increased significantly (P <0.05) oils absorption capacity (OAC) and bulk density (BD). However, cooking on embers decreased significantly (P <0.05) oils absorption capacity (OAC) but not affected significantly (P <0.05) bulk density (BD). The steaming time (30 min) is recommended to considerably influence the physico-functional parameters of the yam (D. bulbifera) flours cv Dougou-won.

scholarly journals The Physical of Biscuit Complete Ration Based on Hymenacne Acutigluma Supplemented with Different Legumes

2018 ◽  
Vol 68 ◽  
pp. 01021
Author(s):  
Riswandi ◽  
Basuni Hamzah ◽  
Agus Wijaya ◽  
Arfan Abrar ◽  
S Agus ◽  
...  
Keyword(s):  
Specific Gravity ◽  
Water Absorption ◽  
Water Content ◽  
Animal Feed ◽  
Physical Quality ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Range Test

The aim of this research was to study the effects of supplementation different legumes on the physical quality of biscuit complete ration based on hymenacne acutigluma. This study was conducted in Animal Feed and Nutrition Laboratory of Agriculture Faculty, Sriwijaya University. This study was done in 2 months. A completely randomized design with four treatments and four replicates was used in this study. Each treatments were P0= 70% kumpai grass + 30% concentrate + 0% legume, P1= 55% kumpai grass + 7.5% lamtoro leaves + 7.5% water mimmosa + 30% concentrate, P2= 55% kumpai grass + 7.5% acacia leaves + 30% concentrate, and P3= 55% kumpai grass + 5% lamtoro leaves + 5% acacia leaves + 5 % water mimmosa + 30% concentrate. Variables measured were water content, density, average collision endurance, specific gravity and water absorption. The result indicated that The adding of different legumes in the ration significantly (P<0.05) affected the specific gravity and water absorption, but no significant effect on density, average collision endurance. Duncan Multirange Range Test showed that treatment of control (P0) had the highest of water absorption (264.56%). The highest content of water gravity was obtained in the treatment of adding lamtoro, acacia and water mimmosa (P3), namely 0.9 g/ml water gravity. The conclusion of this study is the addition of different legumes in kumpai grass-based diets can improve the physical quality of the complete ration biscuit. The addition of lamtoro leaves, water mimosa and acacia at the level of 5%, gave the best result in specific gravity and water absorption.

scholarly journals Physicochemical Characteristics of Black Bean Protein Concentrate Based on the Variation of Heating Time

2021 ◽  
Vol 1 (1) ◽  
pp. 12-18
Author(s):  
Syane Palijama ◽  
Priscillia Picauly ◽  
Windarti Windarti
Keyword(s):  
Moisture Content ◽  
Water Absorption ◽  
Protein Content ◽  
Bulk Density ◽  
Physicochemical Characteristics ◽  
Heating Time ◽  
Ash Content ◽  
Protein Concentrate ◽  
Black Bean ◽  
Bean Protein

One type of beans that can be used as a source of protein is the black bean (Phaseolus vulgaris. L); because it has a sufficiently high protein content of 16.6%, it has the potential to be developed into protein concentrate. This study aimed to characterize the physicochemical characteristics of black bean protein concentrate based on heating time. An experiment was carried out and arranged in a Completely Randomized Design, with four levels of treatments, i.e. heating time of 15 minutes, 30 minutes, 45 minutes, and 60 minutes. The observed variables were yield, bulk density, water absorption, protein content, moisture content, and ash content. The results showed that the yield value was 7.66 - 12.11%, bulk density 0.78 - 0.81 g/mL, water absorption 1.84 - 1.97%, protein content 71.39 - 76.00%, moisture content 11.85 - 12.94% and ash content 3.30 - 3.57%.

scholarly journals Functional and Physicochemical Characteristics of Raw, Roasted and Germinated Buckwheat Flour

2019 ◽  
Author(s):  
Beenu Tanwar ◽  
Nistha Lamsal ◽  
Ankit Goyal ◽  
Vikas Kumar
Keyword(s):  
Antioxidant Activity ◽  
Water Absorption ◽  
Bulk Density ◽  
Phenolic Content ◽  
Absorption Capacity ◽  
Total Phenolic ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Swelling Power ◽  
Buckwheat Flour

Purpose: Buckwheat, a pseudocereal is a nutritionally dense and gluten-free grain which has a great potential especially in the functional food industry. Domestic processing methods like germination and roasting may enhance the nutritional and functional components of the buckwheat. Design/methodology/approach: The raw, roasted (120°C for 10 min) and germinated (27 ± 3°C for 24 hours) seed flour was analyzed for functional (bulk density, water absorption capacity, oil absorption capacity, swelling power, and emulsifying capacity and activity) and physicochemical (fat, ash, protein, total carbohydrate, total phenolic content and antioxidant activity) parameters. Findings: Both the methods showed varied deviation of functional properties and nutrients from the raw flour. Germination significantly (p 0.05) increased the protein (11.5%) and moisture (14.66%) whereas, decreased ash (1.8%), carbohydrate (62.84%), fat (1.33%) and fiber (7.87%); roasting significantly (p 0.05) increased the carbohydrate (71.38%) whereas, decreased ash (1.8%), fat (1.33%), fibre (6.32%), moisture (11.66%) and protein (7.6%) content. Germination significantly (p 0.05) increased the phenolic content and antioxidant activity (82.63%). Bulk density and emulsion capacity decreased in both germinated and roasted buckwheat flour. However, both germination and roasting significantly (p 0.05) increased the oil absorption capacity, swelling power, and water absorption capacity. Originality/value: The present study suggests that germinated and roasted flours can be utilized commercially for the production of economical, better and nutrient-dense food products for people suffering from cereal-based health disorders.

scholarly journals Sustainable Conservation Tillage Technique for Improving Soil Health by Enhancing Soil Physicochemical Quality Indicators under Wheat Mono-Cropping System Conditions

2021 ◽  
Vol 13 (15) ◽  
pp. 8177
Author(s):  
Mahran Sadiq ◽  
Guang Li ◽  
Nasir Rahim ◽  
Majid Mahmood Tahir
Keyword(s):  
Hydraulic Conductivity ◽  
Water Content ◽  
Bulk Density ◽  
Conservation Tillage ◽  
C:N Ratio ◽  
Soil Health ◽  
Cropping System ◽  
Physicochemical Characteristics ◽  
Soil Bulk Density ◽  
Soil Physicochemical Characteristics

An improved understanding of the effect of conservation tillage on soil physicochemical quality indicators is obligatory to manage and conserve soil in a climate change scenario. Tillage strategies change soil physicochemical characteristics, consequently modifying crop yields. Conservation tillage is generally used to improve the soil physicochemical characteristics globally. However, the impact of conservation tillage on different soil depths under wheat cultivation is not well documented. A 3-year study was conducted using a randomized complete block design (RCDB). The objective of this research was to specifically study soil physicochemical indicators (soil bulk density, porosity, hydraulic conductivity, water content, temperature, nitrogen, phosphorous, potassium, C:N ratio, pH) and (crop yield) in conventional tillage (CT), straw incorporation into the conventionally tilled soil (CTS), no-tillage (NT), and stubble-retention to the no-tilled soil (NTS) measures under wheat monocropping system across different soil layers. Averaged over 0–40 cm soil layer, the results depicted scarce differences among the tillage practices regarding soil bulk density, porosity, water content and hydraulic conductivity. CT increased soil temperature over conservation tillage systems. Overall, conservation tillage improved soil total nitrogen, available phosphorous, total potassium, C:N ratio and yield than CT, whilst it decreased soil pH. We conclude that NTS and CTS are the best strategies to enhance soil health under wheat mono-cropping system conditions.

Effect of Addition of Seaweed Flour (Eucheuma Cottoni) And Soy Bean Flour (Glycine Max) On Tapioca Noodles

2019 ◽  
Vol 1 (2) ◽  
Author(s):  
Tengku Mia Rahmiati ◽  
Zulfikar Zulfikar ◽  
Salfauqi Nurman
Keyword(s):  
Content Analysis ◽  
Water Absorption ◽  
Protein Content ◽  
Water Content ◽  
Physicochemical Characteristics ◽  
Soybean Flour ◽  
Test Analysis ◽  
Bean Flour ◽  
Randomized Design ◽  
Water Absorption Test

Tapioca dried noodles are one of the results of food diversification. To increase the nutritional value of tapioca dried noodles, the addition of soybean flour and seaweed flour is done. This study was aimed at finding out the effect of seaweed flour and soybean flour additions on the physicochemical characteristics of dried noodles. The research was conducted using completely randomized design (CRD) factorial focussing on 2 factors, the addition of seaweed flour (L) (35, 25 and 15 grams) and the addition of soybean flour (K) (15, 25 and 35 grams). The observations consisted of organoleptic tests, water absorption test analysis, water content analysis and protein content analysis. The results of this study indicated that the best formulation of dried noodles was the analysis result (L1K2) with organoleptic results on color 4.34 (like), flavor 4.43 (like), taste 4.46 (like) and texture 4.21 (like). In addition, the physical chemical characteristics was the value of water absorption (394.16%), water content (9.6%) and protein content (13.12%).

scholarly journals SIFAT FISIKOKIMIA DAN FUNGSIONAL PATI DARI MOCAF (MODIFIED CASSAVA FLOUR) VARIETAS KASPRO DAN CIMANGGU

2019 ◽  
Vol 15 (2) ◽  
pp. 80 ◽  
Author(s):  
Nurud Diniyah ◽  
Achmad Subagio ◽  
Riri Nur Lutfian Sari ◽  
Nugraha Yuwana
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Functional Properties ◽  
Block Design ◽  
Absorption Capacity ◽  
Raw Material ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Cassava Flour ◽  
Swelling Power

<p>Singkong varietas manis (Cimanggu) dan pahit (Kaspro) dapat digunakan sebagai bahan baku dalam pembuatan MOCAF. Ekstraksi pati MOCAF dapat dipengaruhi oleh lama fermentasi dan varietas singkong. Tujuan dari penelitian ini adalah mengetahui pengaruh perbedaan lama fermentasi terhadap sifat fungsional pati dari MOCAF dengan dua varietas singkong Kaspro dan Cimanggu. Penelitian ini menggunakan metode Rancangan Acak Kelompok (RAK) dengan faktor tunggal yaitu lama fermentasi (0, 12, 24 jam) dan varietas sebagai kelompoknya (Cimanggu dan Kaspro) dengan 3 kali ulangan. Parameter yang dianalisis yaitu sifat fisik (densitas kamba dan warna), sifat kimia (kadar protein, lemak, abu dan karbohidrat) serta sifat fungsional pati MOCAF (<em>swelling power, solubilitas</em>, daya serap air dan daya serap minyak). Hasil penelitian menunjukkan bahwa lama fermentasi 24 jam dari singkong varietas Kaspro memiliki nilai tertinggi yaitu <em>bulk density </em>0,7505±0,0158 (g/mL), <em>swelling power </em>7,4516±0,1185 (g/g), <em>solubility </em>1,9294±0,2456 (%), <em>water absorption capacity </em>(WAC) 12,0000±1,0000 (mL/g) dan <em>oil absorption capacity </em>(OAC) 17,6667±0,5774 (mL/g), <em>lightness</em> 89,9433±0,1079 dan <em>whitness index </em>85,9113±0,0821 serta kadar protein, lemak, abu dan karbohidrat berturut-turut (0,6094±0,04; 0,3666±0,12; 0,1849±0,03 dan 86,0125±0,42 %). Penggunaan varietas yang berbeda sebagai bahan baku MOCAF, menunjukkan hasil bahwa singkong dengan kadar sianida tinggi juga memiliki pati lebih tinggi (Kaspro), memiliki sifat fungsional (b<em>ulk density, swelling power, solubility</em>, WAC, OAC) yang lebih baik sehingga dapat digunakan untuk keperluan dunia industri yang lebih luas.</p><p> </p><p><strong>Functional Properties of Starch MOCAF (Modified Cassava Flour) from Cassava Variety Kaspro and Cimanggu</strong></p><p>Cassava from sweet (Cimanggu) and bitter (Kaspro) varieties can be used as raw material to produced MOCAF. MOCAF’s starch extraction can be influenced by time of fermentation and variety of cassava. The aim of this research is to determine the effect of time fermentation on the functional properties of MOCAF starch which made from two varieties of cassava (Kaspro and Cimanggu). Randomized Block Design (RAK) with the single factor, time of fermentation (0, 12, 24 hours) and varieties as its group (Cimanggu and Kaspro) with triplicate was used in this research. The physical properties ( bulk density, colour), chemical properties (protein, fat, ash and carbohydrate) and functional properties of MOCAF starch (swelling power, solubility, water absorption capacity and oil absorption capacity) were evaluated. The result showed that Kaspro variety and time of fermentation 24 hour had the highest value of bulk density 0,7505±0,0158 (g/mL), swelling power 7,4516±0,1185 (g/g), solubility 1,9294±0,2456 (%), WAC 12,0000±1,0000 (mL/g) dan OAC 17,6667±0,5774 (mL/g), lightness 89,9433±0,1079, whiteness index 85,9113±0,0821, protein, fat, ash and carbohydrate content respectively 0,6094±0,04; 0,3666±0,12; 0,1849±0,03 and 86,0125±0,42 %. The varieties of cassava with highest cyanide content (Kaspro) also highest in starch content shows that has better functional properties (bulk density, swelling power, solubility, WAC, OAC) so it can be used to widely application for industrial.</p><p><strong><br /></strong></p>

scholarly journals Sifat Fisik Pati Ganyong (Canna edulis Kerr.) Termodifikasi dan Penambahan Gum Xanthan untuk Rerotian (Physical Characteristics of Modified Canna edulis Kerr. Starch and Gum Xanthan for Bakeries)

2016 ◽  
Vol 36 (03) ◽  
pp. 335 ◽  
Author(s):  
Parwiyanti Parwiyanti ◽  
Filli Pratama ◽  
Agus Wijaya ◽  
Nura Malahayati ◽  
Eka Lidiasari
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Wheat Flour ◽  
Water Solubility ◽  
Block Design ◽  
Absorption Index ◽  
Bakery Products ◽  
Swelling Power ◽  
Heat Moisture Treatment ◽  
Moisture Treatment

Modification of Canna starch through heat-moisture treatment (HMT) and gum xanthan (GX) treatment was conducted to improve the disadvantage of natural Canna starch in order to expand its usage in food industry, especially for bakery products. The research was arranged in a factorial randomized complete block design with three factors (temperature, incubation time, and GX concentrations) and three replications for each factor.  The modified Canna  starch by HMT possessed water content of 15 % as well as combination of temperature (80 °C and 100 °C), periods (8 and 16 hours) and concentration of GX (0; 0.5; 1; 1.5 and 2 %). The observed variables were the swelling power, water solubility index, water absorption index, baking expantion, and bulk density of modified Canna starch. The result showed that the modification of Canna starch by temperature, time of HMT and concentration GX produced modified starch with physical properties that significantly differ among treatments and natural starch.  Modified Canna starch by treatments of 80 °C, 8 hours, and 1 % xanthan gum concentration showed had swelling power 16.90 ± 0.48 g/g, water solubility index 10.28 ± 0.25 %, water absorption index 112.58 ± 0.38 %, baking expantion 0.94 ± 0.11 mL/g and bulk density 0.73 ± 0.026 g/mL which alike with wheat flour so that it can be further developed as wheat flour substitute on bakery products. ABSTRAKPenelitian modifikasi pati ganyong melalui perlakuan heat-moisture-treatment (HMT) dan penambahan gum xanthan (GX) dilakukan untuk memperbaiki kelemahan pati ganyong alami sehingga menjadi luas aplikasinya dalam industri pangan terutama produk rerotian.  Penelitian menggunakan rancangan acak kelompok faktorial dengan 3 perlakukan dan 3 ulangan.  Perlakuan yang diberikan adalah waktu (8 dan 16 jam), suhu (80 °C dan 100 °C), kadar air 15 % dan konsentrasi gum xanthan (0, 0,5; 1; 1,5; 2 %).  Data dianalisis dengan sidik ragam (ANOVA) pada α = 0,05, dilanjutkan dengan uji BNJ (α = 0,05). Parameter yang diamati swelling power (SP), indeks kelarutan dalam air (IKA), indeks absobsi air (IAA), derajat pengembangan (DP), dan densitas kamba (DK) pati ganyong termodifikasi. Hasil penelitian menunjukkan bahwa modifikasi pati ganyong dengan kombinasi perlakuan suhu dan waktu HMT serta konsentrasi GX menghasilkan pati termodifikasi dengan sifat fisik yang berbeda nyata antar perlakuan maupun pati alaminya.  Modifikasi pati ganyong dengan HMT pada suhu 80 °C, waktu 8 jam, kadar air pati 15 % dan konsentrasi gum xanthan 1 % dapat menghasilkan pati ganyong yang sifat fisiknya mendekati tepung terigu kadar protein sedang dan berbeda dengan pati ganyong alami. Sifat fisik pati ganyong termodifikasi tersebut adalah SP 16,90 ± 0,48 g/g, IKA 10,28 ± 0,25 %, IAA 112,58 ± 0,38 %, DP 0,94 ± 0,11 mL/g, dan DK 0,73 ± 0,026 g/mL.Kata kunci: Pati ganyong; gum xanthan; HMT; modifikasi; sifat fisik

Sign in / Sign up

Export Citation Format

Share Document