scholarly journals The Influence of Clamping, Structure Geometry, and Material on Seismic Metamaterial Performance

2021 ◽  
Vol 8 ◽  
Author(s):  
T. Venkatesh Varma ◽  
Bogdan Ungureanu ◽  
Saikat Sarkar ◽  
Richard Craster ◽  
Sébastien Guenneau ◽  
...  
Keyword(s):  
Solid Mechanics ◽  
Soft Soil ◽  
Ground Vibration ◽  
Cost Effective ◽  
Filling Fraction ◽  
Steel Columns ◽  
Mechanical Metamaterials ◽  
Frequency Regime ◽  
Specific Geometry ◽  
The Impact

Diverting and controlling the impact of elastic vibrations upon an infrastructure is a major challenge for seismic hazard mitigation and for the reduction of machine noise and vehicle vibration in the urban environment. Seismic metamaterials (SMs), with their inherent ability to manipulate wave propagation, provide a key route for overcoming the technological hurdles involved in this challenge. Engineering the structure of the SM serves as a basis to tune and enhance its functionality, and inspired by split rings, swiss-rolls, notch-shaped, and labyrinthine designs of elementary cells in electromagnetic and mechanical metamaterials, we investigate altering the structure geometries of SMs with the aim of creating large bandgaps in a subwavelength regime. Interestingly, clamping an SM to the bedrock creates a zero frequency stopband, but further effects can be observed in the higher frequency regime due to their specific geometry. We show that square stiff inclusions perform better in comparison to circular ones while keeping the same filling fraction. En route to enhancing the bandgap, we have also studied the performance of SMs with different constituent materials; we find that steel columns, as inclusions, show large bandgaps, however, the columns are too large for steel to be a feasible material in practical or financial terms. Non-reinforced concrete would be preferable for industry level scaling up of the technology because, concrete is cost-effective, easy to cast directly at the construction site and easy to provide arbitrary geometry of the structure. As a part of this study, we show that concrete columns can also be designed to exhibit bandgaps if we cast them within a soft soil coating surrounding the protected area for various civil structures like a bridge, building, oil pipelines, etc. Although our motivation is for ground vibration, and we use the frequencies, lengthscales, and material properties relevant for that application, it is notable that we use the equations of linear elasticity, and our investigation is more broadly relevant in solid mechanics.

Influence of Fly Ash Addition on Behavior of Soft Clayey Soil

2020 ◽  
Vol 38 (5A) ◽  
pp. 698-706
Author(s):  
Hussein H. Karim ◽  
Zeena W. Samueel ◽  
Adel H. Jassem
Keyword(s):  
Fly Ash ◽  
Specific Gravity ◽  
Clayey Soil ◽  
Soft Soil ◽  
Cost Effective ◽  
Liquid Limit ◽  
Ash Content ◽  
Unit Weight ◽  
Cost Effective Method ◽  
The Impact

This paper investigates the impact of the fly Ash addition on the Geotechnical properties of soft soil as well as chooses the optimum percentage added of fly ash. To understand the behavior of fly ash mixed with soil, a number of laboratory experiments testing conducted on clayey soil-fly ash mixture in several percentages (5,10,15,20,25, and 30%) as Atterberg test, Specific gravity test, compaction test, California Bearing Ratio (C.B.R) Test, Unconfined Compressive Strength (UCS) Test, Consolidation Test. Test results indicate rising in plastic limit and liquid limit as fly ash adding.  Specific gravity decreased essentially by adding fly ash. Whereas there was falling on the Dry unit weight value with the contract to the decreasing in the water content.  The CBR and UCS values were increased with increasing fly ash content. 20% was the optimum fly Ash content. This study also benefits the effective use of fly ash and thus a cost-effective method for improving the soil properties.

Regulatory and sustainability initiatives lead to improved polyaminopolyamide epichlorohydrin (PAE) wet-strength resins and paper products

TAPPI Journal ◽  
2018 ◽  
Vol 17 (09) ◽  
pp. 519-532 ◽  
Author(s):  
Mark Crisp ◽  
Richard Riehle
Keyword(s):  
Health And Safety ◽  
Cost Effective ◽  
Worker Safety ◽  
Regulatory Requirements ◽  
Wet Strength ◽  
The Past ◽  
Consumer Safety ◽  
Federal Institute ◽  
Sustainability Initiatives ◽  
The Impact

Polyaminopolyamide-epichlorohydrin (PAE) resins are the predominant commercial products used to manufacture wet-strengthened paper products for grades requiring wet-strength permanence. Since their development in the late 1950s, the first generation (G1) resins have proven to be one of the most cost-effective technologies available to provide wet strength to paper. Throughout the past three decades, regulatory directives and sustainability initiatives from various organizations have driven the development of cleaner and safer PAE resins and paper products. Early efforts in this area focused on improving worker safety and reducing the impact of PAE resins on the environment. These efforts led to the development of resins containing significantly reduced levels of 1,3-dichloro-2-propanol (1,3-DCP) and 3-monochloropropane-1,2-diol (3-MCPD), potentially carcinogenic byproducts formed during the manufacturing process of PAE resins. As the levels of these byproducts decreased, the environmental, health, and safety (EH&S) profile of PAE resins and paper products improved. Recent initiatives from major retailers are focusing on product ingredient transparency and quality, thus encouraging the development of safer product formulations while maintaining performance. PAE resin research over the past 20 years has been directed toward regulatory requirements to improve consumer safety and minimize exposure to potentially carcinogenic materials found in various paper products. One of the best known regulatory requirements is the recommendations of the German Federal Institute for Risk Assessment (BfR), which defines the levels of 1,3-DCP and 3-MCPD that can be extracted by water from various food contact grades of paper. These criteria led to the development of third generation (G3) products that contain very low levels of 1,3-DCP (typically <10 parts per million in the as-received/delivered resin). This paper outlines the PAE resin chemical contributors to adsorbable organic halogens and 3-MCPD in paper and provides recommendations for the use of each PAE resin product generation (G1, G1.5, G2, G2.5, and G3).

Exploring the Benefits of Early Contractor Involvement (ECI) and the Mechanism for Automated 5D BIM Quantification Process in Offsite Modular Construction

2016 ◽  
Author(s):  
Tochukwu Moses ◽  
David Heesom ◽  
David Oloke ◽  
Martin Crouch
Keyword(s):  
Effective Means ◽  
Cost Effective ◽  
Modular Construction ◽  
Automated Quantification ◽  
Building Information ◽  
Project Risks ◽  
Value Add ◽  
The Uk ◽  
The Impact ◽  
Level 2

The UK Construction Industry through its Government Construction Strategy has recently been mandated to implement Level 2 Building Information Modelling (BIM) on public sector projects. This move, along with other initiatives is key to driving a requirement for 25% cost reduction (establishing the most cost-effective means) on. Other key deliverables within the strategy include reduction in overall project time, early contractor involvement, improved sustainability and enhanced product quality. Collaboration and integrated project delivery is central to the level 2 implementation strategy yet the key protocols or standards relative to cost within BIM processes is not well defined. As offsite construction becomes more prolific within the UK construction sector, this construction approach coupled with BIM, particularly 5D automated quantification process, and early contractor involvement provides significant opportunities for the sector to meet government targets. Early contractor involvement is supported by both the industry and the successive Governments as a credible means to avoid and manage project risks, encourage innovation and value add, making cost and project time predictable, and improving outcomes. The contractor is seen as an expert in construction and could be counter intuitive to exclude such valuable expertise from the pre-construction phase especially with the BIM intent of äóÖbuild it twiceäó», once virtually and once physically. In particular when offsite construction is used, the contractoräó»s construction expertise should be leveraged for the virtual build in BIM-designed projects to ensure a fully streamlined process. Building in a layer of automated costing through 5D BIM will bring about a more robust method of quantification and can help to deliver the 25% reduction in overall cost of a project. Using a literature review and a case study, this paper will look into the benefits of Early Contractor Involvement (ECI) and the impact of 5D BIM on the offsite construction process.

Pound Wise and Penny Foolish? Weight Loss and The Dynamics of Health Care Spending

2011 ◽  
Vol 14 (2) ◽  
Author(s):  
Thomas G Koch
Keyword(s):  
Weight Loss ◽  
Cost Savings ◽  
Cost Effective ◽  
Economic Consequences ◽  
Health Care Spending ◽  
Order Of Magnitude ◽  
Dynamic Measures ◽  
The Cost ◽  
The Impact ◽  
The Relationship

Current estimates of obesity costs ignore the impact of future weight loss and gain, and may either over or underestimate economic consequences of weight loss. In light of this, I construct static and dynamic measures of medical costs associated with body mass index (BMI), to be balanced against the cost of one-time interventions. This study finds that ignoring the implications of weight loss and gain over time overstates the medical-cost savings of such interventions by an order of magnitude. When the relationship between spending and age is allowed to vary, weight-loss attempts appear to be cost-effective starting and ending with middle age. Some interventions recently proven to decrease weight may also be cost-effective.

Motivating Compliance: Firm Response to Mandatory Disclosure Policies

2018 ◽  
Vol 32 (2) ◽  
pp. 103-119
Author(s):  
Colleen M. Boland ◽  
Chris E. Hogan ◽  
Marilyn F. Johnson
Keyword(s):  
Conflict Of Interest ◽  
Low Cost ◽  
Cost Effective ◽  
Data Availability ◽  
Policy Adoption ◽  
Future Research ◽  
Regulated Firms ◽  
Firm Response ◽  
Disclosure Rules ◽  
The Impact

SYNOPSIS Mandatory existence disclosure rules require an organization to disclose a policy's existence, but not its content. We examine policy adoption frequencies in the year immediately after the IRS required mandatory existence disclosure by nonprofits of various governance policies. We also examine adoption frequencies in the year of the subsequent change from mandatory existence disclosure to a disclose-and-explain regime that required supplemental disclosures about the content and implementation of conflict of interest policies. Our results suggest that in areas where there is unclear regulatory authority, mandatory existence disclosure is an effective and low cost regulatory device for encouraging the adoption of policies desired by regulators, provided those policies are cost-effective for regulated firms to implement. In addition, we find that disclose-and-explain regulatory regimes provide stronger incentives for policy adoption than do mandatory existence disclosure regimes and also discourage “check the box” behavior. Future research should examine the impact of mandatory existence disclosure rules in the year that the regulation is implemented. Data Availability: Data are available from sources cited in the text.

scholarly journals Control of Oxygen Impurities in a Continuous-Feeding Czochralski-Silicon Crystal Growth by the Double-Crucible Method

Crystals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 264
Author(s):  
Wenhan Zhao ◽  
Jiancheng Li ◽  
Lijun Liu
Keyword(s):  
Oxygen Concentration ◽  
Silicon Crystal ◽  
Cost Effective ◽  
Czochralski Method ◽  
Crucible Wall ◽  
Oxygen Impurity ◽  
Continuous Feeding ◽  
The Impact ◽  
Oxygen Impurities ◽  
Crystal Interface

The continuous-feeding Czochralski method is a cost-effective method to grow single silicon crystals. An inner crucible is used to prevent the un-melted silicon feedstock from transferring to the melt-crystal interface in this method. A series of global simulations were carried out to investigate the impact of the inner crucible on the oxygen impurity distributions at the melt-crystal interface. The results indicate that, the inner crucible plays a more important role in affecting the O concentration at the melt-crystal interface than the outer crucible. It can prevent the oxygen impurities from being transported from the outer crucible wall effectively. Meanwhile, it also introduces as a new source of oxygen impurity in the melt, likely resulting in a high oxygen concentration zone under the melt-crystal interface. We proposed to enlarge the inner crucible diameter so that the oxygen concentration at the melt-crystal interface can be controlled at low levels.

scholarly journals Cost-effectiveness and feasibility of conditional economic incentives and motivational interviewing to improve HIV health outcomes of adolescents living with HIV in Anambra State, Nigeria

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Obinna Ikechukwu Ekwunife ◽  
Chinelo Janefrances Ofomata ◽  
Charles Ebuka Okafor ◽  
Maureen Ugonwa Anetoh ◽  
Stephen Okorafor Kalu ◽  
...  
Keyword(s):  
Viral Load ◽  
Cost Effectiveness ◽  
Service Delivery ◽  
Motivational Interviewing ◽  
Cost Effective ◽  
Economic Incentives ◽  
Additional Patient ◽  
Incentive Scheme ◽  
The Cost ◽  
The Impact

Abstract Background In sub-Saharan Africa, there is increasing mortality and morbidity of adolescents due to poor linkage, retention in HIV care and adherence to antiretroviral therapy (ART). This is a result of limited adolescent-centred service delivery interventions. This cost-effectiveness and feasibility study were piggybacked on a cluster-randomized trial that assessed the impact of an adolescent-centred service delivery intervention. The service delivery intervention examined the impact of an incentive scheme consisting of conditional economic incentives and motivational interviewing on the health outcomes of adolescents living with HIV in Nigeria. Method A cost-effectiveness analysis from the healthcare provider’s perspective was performed to assess the cost per additional patient achieving undetected viral load through the proposed intervention. The cost-effectiveness of the incentive scheme over routine care was estimated using the incremental cost-effectiveness ratio (ICER), expressed as cost/patient who achieved an undetectable viral load. We performed a univariate sensitivity analysis to examine the effect of key parameters on the ICER. An in-depth interview was conducted on the healthcare personnel in the intervention arm to explore the feasibility of implementing the service delivery intervention in HIV treatment hospitals in Nigeria. Result The ICER of the Incentive Scheme intervention compared to routine care was US$1419 per additional patient with undetectable viral load. Going by the cost-effectiveness threshold of US$1137 per quality-adjusted life-years suggested by Woods et al., 2016, the intervention was not cost-effective. The sensitivity test showed that the intervention will be cost-effective if the frequency of CD4 count and viral load tests are reduced from quarterly to triannually. Healthcare professionals reported that patients’ acceptance of the intervention was very high. Conclusion The conditional economic incentives and motivational interviewing was not cost-effective, but can become cost-effective if the frequency of HIV quality of life indicator tests are performed 1–3 times per annum. Patients’ acceptance of the intervention was very high. However, healthcare professionals believed that sustaining the intervention may be difficult unless factors such as government commitment and healthcare provider diligence are duly addressed. Trial registration This trial is registered in the WHO International Clinical Trials Registry through the WHO International Registry Network (PACTR201806003040425).

scholarly journals Salt Intake in Nigeria: a nationwide population survey

2020 ◽  
Vol 41 (Supplement_2) ◽  
Author(s):  
A.N Odili ◽  
B.S Chori ◽  
B Danladi ◽  
P.C Nwakile ◽  
J.O Ogedengbe ◽  
...  
Keyword(s):  
Salt Intake ◽  
Sodium Intake ◽  
Population Analysis ◽  
Cost Effective ◽  
Rural Site ◽  
Urban Site ◽  
Funding Source ◽  
Salt Reduction ◽  
High Salt Intake ◽  
The Impact

Abstract Background Population wide salt reduction programmes are cost effective strategies for control of cardiovascular diseases (CVDs). Obtaining a nationwide salt consumption data in a multi-cultural setting as Nigeria's is key for proper implementation and monitoring of such strategy. Methods We measured sodium in 24-hour urine of free-living adult Nigerians selected from an urban and a rural site each from the 6 geopolitical zones of Nigeria to evaluate patterns of salt intake and its associations with blood pressures (BP). Results Across the 12 sites, sodium intake ranged from 97.9 in the rural South-South to 210 mmol/day in the urban site of the same zone. Overall, the median (IQR) daily sodium intake was 143.5 (97.8) mmol; with higher (p=0.0028) levels among the urban 149.7 (113.8) compared to the rural 133.1 (105.2) dwellers. Overall, 20% of the subjects consumed less than the recommended 2g (86mmol) of sodium daily. After adjustment for age, sex and BMI; sodium intake and BP (systolic and diastolic) were positively associated in 8 out of the 12 sites; significantly so in 2 (p&lt;0.05) for systolic. Within population analysis; which included 973 individuals, increasing sodium intake tended (not significantly) to increase SBP but decrease DBP. However, among subjects whose sodium intake was in excess of 257mmol/day, a 100 mmol/day increase in sodium intake was significantly (p=0.04) associated with a 3.3 mmHg increase in SBP. Conclusion Salt intake among Nigerians is higher than the recommended. The impact of sodium intake on BP appears to be evident only among individuals with high salt intake. Funding Acknowledgement Type of funding source: Foundation. Main funding source(s): Wellcome Trust

scholarly journals Anti-meningococcal B vaccination in Italian adolescents: a cost-effective health opportunity

2020 ◽  
Vol 30 (Supplement_5) ◽  
Author(s):  
D Panatto ◽  
P Landa ◽  
D Amicizia ◽  
P L Lai ◽  
E Lecini ◽  
...  
Keyword(s):  
Large Scale ◽  
Public Health Problem ◽  
Vaccination Strategy ◽  
Cost Effective ◽  
Dose Schedule ◽  
Developed Countries ◽  
Invasive Disease ◽  
International Setting ◽  
The Impact

Abstract Background Invasive disease due to Neisseria meningitidis (Nm) is a serious public health problem even in developed countries, owing to its high lethality rate (8-15%) and the invalidating sequelae suffered by many (up to 60%) survivors. As the microorganism is transmitted via the airborne route, the only available weapon in the fight against Nm invasive disease is vaccination. Our aim was to carry out an HTA to evaluate the costs and benefits of anti-meningococcal B (MenB) vaccination with Trumenba® in adolescents in Italy, while also considering the impact of this new vaccination strategy on organizational and ethics aspects. Methods A lifetime Markov model was developed. MenB vaccination with the two-dose schedule of Trumenba® in adolescents was compared with 'non-vaccination'. Two perspectives were considered: the National Health Service (NHS) and society. Three disease phases were defined: acute, post-acute and long-term. Epidemiological, economic and health utilities data were taken from Italian and international literature. The analysis was conducted by means of Microsoft Excel 2010®. Results Our study indicated that vaccinating adolescents (11th year of life) with Trumenba® was cost-effective with an ICER = € 7,912/QALY from the NHS perspective and € 7,758/QALY from the perspective of society. Vaccinating adolescents reduces the number of cases of disease due to meningococcus B in one of the periods of highest incidence of the disease, resulting in significant economic and health savings. Conclusions This is the first study to evaluate the overall impact of free MenB vaccination in adolescents both in Italy and in the international setting. Although cases of invasive disease due to meningococcus B are few, if the overall impact of the disease is adequately considered, it becomes clear that including anti-meningococcal B vaccination into the immunization program for adolescents is strongly recommended from the health and economic standpoints. Key messages Free, large-scale MenB vaccination is key to strengthening the global fight against invasive meningococcal disease. Anti-meningococcal B vaccination in adolescents is a cost-effective health opportunity.

scholarly journals A Reference Framework to Combine Model-Based Design and AR to Improve Social Sustainability

2021 ◽  
Vol 13 (4) ◽  
pp. 2031
Author(s):  
Fabio Grandi ◽  
Riccardo Karim Khamaisi ◽  
Margherita Peruzzini ◽  
Roberto Raffaeli ◽  
Marcello Pellicciari
Keyword(s):  
Positive Impact ◽  
Cost Effective ◽  
Digital Models ◽  
Model Based ◽  
Digital Contents ◽  
Recent Developments ◽  
Virtual Simulations ◽  
Product And Process ◽  
The Impact ◽  
Time Information

Product and process digitalization is pervading numerous areas in the industry to improve quality and reduce costs. In particular, digital models enable virtual simulations to predict product and process performances, as well as to generate digital contents to improve the general workflow. Digital models can also contain additional contents (e.g., model-based design (MBD)) to provide online and on-time information about process operations and management, as well as to support operator activities. The recent developments in augmented reality (AR) offer new specific interfaces to promote the great diffusion of digital contents into industrial processes, thanks to flexible and robust applications, as well as cost-effective devices. However, the impact of AR applications on sustainability is still poorly explored in research. In this direction, this paper proposed an innovative approach to exploit MBD and introduce AR interfaces in the industry to support human intensive processes. Indeed, in those processes, the human contribution is still crucial to guaranteeing the expected product quality (e.g., quality inspection). The paper also analyzed how this new concept can benefit sustainability and define a set of metrics to assess the positive impact on sustainability, focusing on social aspects.

Sign in / Sign up

Export Citation Format

Share Document