scholarly journals Activity of Ag/CeZrO2, Ag+K/CeZrO2, and Ag-Au+K/CeZrO2 Systems for Lean Burn Exhaust Clean-Up

Catalysts ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1041
Author(s):  
Ewa M. Iwanek ◽  
Leonarda Francesca Liotta ◽  
Shazam Williams ◽  
Linjie Hu ◽  
Huitian Ju ◽  
...  
Keyword(s):  
Water Vapor ◽  
Co Oxidation ◽  
No Oxidation ◽  
Potassium Ions ◽  
Au Catalyst ◽  
Propane Combustion ◽  
Lean Burn ◽  
Co Conversion ◽  
Negative Effect ◽  
No2 Formation

Herein, the activity of Ag and bimetallic Au-Ag catalysts, supported over Ce0.85Zr0.15O2 (CZ), was investigated in a complex stream, whose components included CO, C3H8, NO, O2, and, optionally, an injection of water vapor. In such a stream, three of the possible reactions that can occur are CO oxidation, propane combustion, and NO oxidation. The aim of these studies was to explore whether silver, due to its strong affinity to oxygen, will counteract the stabilization of oxygen by potassium. The effect of the presence of potassium ions on the activity of the monometallic silver catalysts is beneficial in the complex stream without water vapor in all three studied reactions, although it is negligible in the model CO stream. It has been shown that water vapor strongly suppresses the activity of the Ag+K/CZ catalyst, much more so than that of the Ag/CZ catalyst. The second purpose of the work was to determine whether the negative effect of potassium ions on the activity of nanogold catalyst can be countered by the addition of silver. Studies in a model stream for CO oxidation have shown that, for a catalyst preloaded with gold, the effect of potassium is nulled by silver, and the activity of AuAg + 0.15 at%K/CZ and AuAg + 0.30 at%K/CZ is the same as that of the monometallic Au catalyst. Conversely, when the reaction is carried out in a complex stream, containing CO, C3H8, NO, O2, and water vapor, the presence of water vapor leads to higher CO conversion as well as increased NO2 formation and slightly suppresses the C3H8 combustion.

scholarly journals Facile Preparation of Mesoporous MCM-48 Containing Silver Nanoparticles with Fly Ash as Raw Materials for CO Catalytic Oxidation

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 841
Author(s):  
Dong Tian ◽  
Yonghong Chen ◽  
Xiaoyong Lu ◽  
Yihan Ling ◽  
Bin Lin
Keyword(s):  
Silver Nanoparticles ◽  
Fly Ash ◽  
Co Oxidation ◽  
Surface Composition ◽  
Raw Materials ◽  
Silica Source ◽  
Co Conversion ◽  
Co Catalytic Oxidation ◽  
Adsorption Desorption

An environmentally friendly method was proposed to prepare mesoporous Mobil Composition of Matter No.48 (MCM-48) using fly ash as the silica source. Silver nanoparticles were infiltrated on MCM-48 facilely by an in situ post-reduction method and evaluated as an effective catalyst for CO oxidation. The as-prepared MCM-48 and Ag/MCM-48 nanoparticles were characterized by XRD, N2 adsorption/desorption, and TEM. Investigations by means of XPS for Ag/MCM-48 were performed in order to illuminate the surface composition of the samples. Studies revealed the strong influence of the loading of Ag nanoparticles on catalysts in the oxidation of CO. CO conversion values for Ag/MCM-48 of 10% and 100% were achieved at temperatures of 220 °C and 270 °C, respectively, indicating that the Ag-decorated MCM-48 catalyst is extremely active for CO oxidation.

In situ FTIR studies of CO oxidation over Fe-free and Fe-promoted PtY catalysts: Effect of water vapor addition

2011 ◽  
Vol 344 (1-2) ◽  
pp. 111-121 ◽  
Author(s):  
Zeinhom M. El-Bahy ◽  
Ahmed I. Hanafy ◽  
Mohamed M. Ibrahim ◽  
Masakazu Anpo
Keyword(s):  
Water Vapor ◽  
Co Oxidation ◽  
In Situ Ftir ◽  
Effect Of Water ◽  
Ftir Studies

Comparing study of the effect of the CeO2-based carrier materials on the total oxidation of CO, methane, and propane over RuO2

2021 ◽  
Author(s):  
Zheng Wang ◽  
Omeir Khalid ◽  
Wei Wang ◽  
Yu Wang ◽  
Tim Weber ◽  
...  
Keyword(s):  
Co Oxidation ◽  
Intrinsic Activity ◽  
Oxidation Reactions ◽  
Oxidation Of Co ◽  
Propane Combustion ◽  
Total Oxidation ◽  
Carrier Material ◽  
Highly Dispersed ◽  
Carrier Materials

The effect of the carrier material on the intrinsic activity of three catalytic total oxidation reactions, namely CO oxidation as well as methane and propane combustion over highly dispersed RuO2...

A Literature Review of NOx Formation Kinetics and a Prediction Method for Lean-Burn, Two-Stroke Natural Gas Engines

2019 ◽  
Author(s):  
Taylor F. Linker ◽  
Mark Patterson ◽  
Greg Beshouri ◽  
Abdullah U. Bajwa ◽  
Timothy J. Jacobs
Keyword(s):  
Natural Gas ◽  
Chemical Properties ◽  
Prediction Method ◽  
Operating Conditions ◽  
Combustion Mechanism ◽  
Nox Emissions ◽  
Lean Burn ◽  
Nox Formation ◽  
Gas Combustion ◽  
No2 Formation

Abstract The increased production of natural gas harvested from unconventional sources, such as shale, has led to fluctuations in the species composition of natural gas moving through pipelines. These variations alter the chemical properties of the bulk gas mixture and, consequently, affect the operation of pipeline compressor engines which use the gas as fuel. Among several possible ramifications of these variations is that of unacceptably high engine-out NOx emissions. Therefore, engine controller enhancements which can account for fuel variability are necessary for maintaining emissions compliance. Having the means to predict NOx emissions from a field engine can inform the development of such control schemes. There are several types of compressor engines; however, this study considers a large bore, lean-burn, two-stroke, integral compressor engine. This class of engine has unique operating conditions which make the formation of engine-out NOx different from typical automotive spark-ignited engines. For this reason, automotive-based methods for predicting NOx emissions are not sufficiently accurate. In this study, an investigation is performed on the possible NO and NO2 formation pathways which could be contributing to exhaust emissions. Additionally, a modeling method is proposed to predict engine-out NOx emissions using a 0-D/1-D model of a Cooper-Bessemer GMWH-10C compressor engine. Predictions are achieved with GRI-Mech3.0, a natural gas combustion mechanism, which allows for simulated formation of NOx species. The implemented technique is tuned using experimental data from a field engine to better predict emissions over a range of engine operating conditions. Tuning the model led to acceptable agreement across operating points varying in both load and trapped equivalence ratio.

scholarly journals Application of Potassium Ion Deposition in Determining the Impact of Support Reducibility on Catalytic Activity of Au/Ceria-Zirconia Catalysts in CO Oxidation, NO Oxidation, and C3H8 Combustion

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 688
Author(s):  
Ewa M. Iwanek (nee Wilczkowska) ◽  
Leonarda F. Liotta ◽  
Shazam Williams ◽  
Linjie Hu ◽  
Krishelle Calilung ◽  
...  
Keyword(s):  
Low Temperature ◽  
Co Oxidation ◽  
Gold Catalysts ◽  
Maximum Temperature ◽  
Potassium Ions ◽  
Reduction Peak ◽  
Temperature Reduction ◽  
Potassium Loading ◽  
The Impact ◽  
Low Temperature Reduction

The purpose of the study was to show how a controlled, subtle change of the reducibility of the support by deposition of potassium ions impacts the activity of gold catalysts. Since the activity of supported gold catalysts in carbon monoxide oxidation is known to strongly depend on the reducibility of the support, this reaction was chosen as the model reaction. The results of tests conducted in a simple system in which the only reagents were CO and O2 showed good agreement with the CO activity trend in tests performed in a complex stream of reagents, which also contained CH4, C2H6, C3H8, NO, and water vapor. The results of the X-ray Diffraction (XRD) studies revealed that the support has the composition Ce0.85Zr0.15O2, that its lattice constant is the same for all samples, and that gold is mostly present in the metallic phase. The reducibility of the systems was established based on Temperature Programmed Reduction (TPR) and in situ XRD measurements in H2 atmosphere. The results show that the low temperature reduction peak, which is due to the presence of gold, is shifted to a higher value by the presence of 0.3 at% potassium ions on the surface. Moreover, the increase of the potassium loading leads to a more pronounced shift. The T50 of CO oxidation in the simple model stream was found to exhibit an excellent linear correlation with the maximum temperature of the low temperature reduction peak of Au catalysts. This means that stabilizing oxygen with a known amount of potassium ions can be numerically used to estimate the T50 in CO oxidation. The results in the complex stream also showed a similar dependence of CO conversion on reducibility, though there was no substantial difference in the activity of the catalysts in other reactions regardless of the potassium loading. These studies have shown that the influence of potassium varies depending on the reaction, which highlights differences in the impact of reducibility and importance of other factors in these reactions.

scholarly journals Catalytic Behaviour of Flame-Made CuO-CeO2 Nanocatalysts in Efficient CO Oxidation

Catalysts ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 256 ◽  
Author(s):  
Feng Zhao ◽  
Shuangde Li ◽  
Xiaofeng Wu ◽  
Renliang Yue ◽  
Weiman Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Water Vapor ◽  
Co Oxidation ◽  
Photoelectron Spectroscopy ◽  
Co Adsorption ◽  
Synergistic Interaction ◽  
Flame Spray ◽  
Oxidation Activity ◽  
X Ray

CuO-CeO2 nanocatalysts with varying CuO contents (1, 5, 9, 14 and 17 wt %) were prepared by one-step flame spray pyrolysis (FSP) and applied to CO oxidation. The influences of CuO content on the as-prepared catalysts were systematically characterized by X-ray diffraction (XRD), N2 adsorption-desorption at −196 °C, field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and hydrogen-temperature programmed reduction (H2-TPR). A superior CO oxidation activity was observed for the 14 wt % CuO-CeO2 catalyst, with 90% CO conversion at 98 °C at space velocity (60,000 mL × g−1 × h−1), which was attributed to abundant surface defects (lattice distortion, Ce3+, and oxygen vacancies) and high reducibility supported by strong synergistic interaction. In addition, the catalyst also displayed excellent stability and resistance to water vapor. Significantly, in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) showed that in the CO catalytic oxidation process, the strong synergistic interaction led readily to dehydroxylation and CO adsorption on Cu+ at low temperature. Furthermore, in the feed of water vapor, although there was an adverse effect on the access of CO adsorption, there was also a positive effect on the formation of fewer carbon intermediates. All these results showed the potential of highly active and water vapor-resistive CuO-CeO2 catalysts prepared by FSP.

scholarly journals A new approach for flow-through respirometry measurements in humans

2010 ◽  
Vol 298 (6) ◽  
pp. R1571-R1579 ◽  
Author(s):  
Edward L. Melanson ◽  
Jan P. Ingebrigtsen ◽  
Audrey Bergouignan ◽  
Kazunori Ohkawara ◽  
Wendy M. Kohrt ◽  
...  
Keyword(s):  
Water Vapor ◽  
Relative Humidity ◽  
Gas Exchange ◽  
Flow Rate ◽  
Water Vapor Pressure ◽  
Propane Combustion ◽  
Pull System ◽  
Novel Approach ◽  
Flow Through ◽  
Combustion Tests

Indirect whole room calorimetry is commonly used in studies of human metabolism. These calorimeters can be configured as either push or pull systems. A major obstacle to accurately calculating gas exchange rates in a pull system is that the excurrent flow rate is increased above the incurrent flow rate, because the organism produces water vapor, which also dilutes the concentrations of respiratory gasses in the excurrent sample. A common approach to this problem is to dry the excurrent gasses prior to measurement, but if drying is incomplete, large errors in the calculated oxygen consumption will result. The other major potential source of error is fluctuations in the concentration of O2 and CO2 in the incurrent airstream. We describe a novel approach to measuring gas exchange using a pull-type whole room indirect calorimeter. Relative humidity and temperature of the incurrent and excurrent airstreams are measured continuously using high-precision, relative humidity and temperature sensors, permitting accurate measurement of water vapor pressure. The excurrent flow rates are then adjusted to eliminate the flow contribution from water vapor, and respiratory gas concentrations are adjusted to eliminate the effect of water vapor dilution. In addition, a novel switching approach is used that permits constant, uninterrupted measurement of the excurrent airstream while allowing frequent measurements of the incurrent airstream. To demonstrate the accuracy of this approach, we present the results of validation trials compared with our existing system and metabolic carts, as well as the results of standard propane combustion tests.

CO Oxidation over an Au Catalyst—State of Art

ChemInform ◽  
2006 ◽  
Vol 37 (23) ◽  
Author(s):  
Izabela Dobrosz ◽  
Ireneusz Kocemba ◽  
Jacek M. Rynkowski
Keyword(s):  
Co Oxidation ◽  
Au Catalyst ◽  
State Of Art
Sign in / Sign up

Export Citation Format

Share Document