scholarly journals Early Output Quasi-Delay-Insensitive Array Multipliers

Electronics ◽  
2019 ◽  
Vol 8 (4) ◽  
pp. 444 ◽  
Author(s):  
Balasubramanian ◽  
Maskell ◽  
Naayagi ◽  
Mastorakis
Keyword(s):  
Cycle Time ◽  
Arithmetic Operation ◽  
Data Communication ◽  
Digital Signal ◽  
Complementary Metal Oxide Semiconductor ◽  
Cmos Technology ◽  
Data Representation ◽  
Oxide Semiconductor ◽  
Array Multiplier ◽  
Array Multipliers

Multiplication is a widely used arithmetic operation in microprocessing and digital signal processing applications, and multiplication is realized using a multiplier. This article presents the quasi-delay-insensitive (QDI) early output versions of recently reported indicating asynchronous array multipliers. Delay-insensitive dual-rail encoding is used for data representation and processing, and 4-phase return-to-zero (RTZ) and return-to-one (RTO) handshake protocols are used for data communication. Many QDI array multipliers were realized using a 32/28 nm complementary metal oxide semiconductor (CMOS) technology. Compared to the optimum indicating array multiplier, the proposed optimum early output array multiplier achieves a 6.2% reduction in cycle time and a 7.4% reduction in power-cycle time product (PCTP) with respect to RTZ handshaking, and a 7.6% reduction in cycle time and an 8.8% reduction in PCTP with respect to RTO handshaking without an increase in the area. The simulation results also convey that the RTO handshaking is preferable to the RTZ handshaking for the optimum implementation of QDI array multipliers.

scholarly journals Low Power Robust Early Output Asynchronous Block Carry Lookahead Adder with Redundant Carry Logic

Electronics ◽  
2018 ◽  
Vol 7 (10) ◽  
pp. 243 ◽  
Author(s):  
Padmanabhan Balasubramanian ◽  
Douglas Maskell ◽  
Nikos Mastorakis
Keyword(s):  
Low Power ◽  
Digital Signal Processor ◽  
Digital Signal ◽  
Complementary Metal Oxide Semiconductor ◽  
Low Power Design ◽  
Cmos Technology ◽  
General Purpose ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Power Cycle

Adder is an important datapath unit of a general-purpose microprocessor or a digital signal processor. In the nanoelectronics era, the design of an adder that is modular and which can withstand variations in process, voltage and temperature are of interest. In this context, this article presents a new robust early output asynchronous block carry lookahead adder (BCLA) with redundant carry logic (BCLARC) that has a reduced power-cycle time product (PCTP) and is a low power design. The proposed asynchronous BCLARC is implemented using the delay-insensitive dual-rail code and adheres to the 4-phase return-to-zero (RTZ) and the 4-phase return-to-one (RTO) handshaking. Many existing asynchronous ripple-carry adders (RCAs), carry lookahead adders (CLAs) and carry select adders (CSLAs) were implemented alongside to perform a comparison based on a 32/28 nm complementary metal-oxide-semiconductor (CMOS) technology. The 32-bit addition was considered for an example. For implementation using the delay-insensitive dual-rail code and subject to the 4-phase RTZ handshaking (4-phase RTO handshaking), the proposed BCLARC which is robust and of early output type achieves: (i) 8% (5.7%) reduction in PCTP compared to the optimum RCA, (ii) 14.9% (15.5%) reduction in PCTP compared to the optimum BCLARC, and (iii) 26% (25.5%) reduction in PCTP compared to the optimum CSLA.

scholarly journals Approximate Array Multipliers

Electronics ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 630
Author(s):  
Padmanabhan Balasubramanian ◽  
Raunaq Nayar ◽  
Douglas L. Maskell
Keyword(s):  
Critical Path ◽  
Complementary Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Total Power ◽  
Path Delay ◽  
Input And Output ◽  
Critical Path Delay ◽  
Standard Design ◽  
Array Multiplier ◽  
Array Multipliers

This article describes the design of approximate array multipliers by making vertical or horizontal cuts in an accurate array multiplier followed by different input and output assignments within the multiplier. We consider a digital image denoising application and show how different combinations of input and output assignments in an approximate array multiplier affect the quality of the denoised images. We consider the accurate array multiplier and several approximate array multipliers for synthesis. The multipliers were described in Verilog hardware description language and synthesized by Synopsys Design Compiler using a 32/28-nm complementary metal-oxide-semiconductor technology. The results show that compared to the accurate array multiplier, one of the proposed approximate array multipliers viz. PAAM01-V7 achieves a 28% reduction in critical path delay, 75.8% reduction in power, and 64.6% reduction in area while enabling the production of a denoised image that is comparable in quality to the image denoised using the accurate array multiplier. The standard design metrics such as critical path delay, total power dissipation, and area of the accurate and approximate multipliers are given, the error parameters of the approximate array multipliers are provided, and the original image, the noisy image, and the denoised images are also depicted for comparison.

A Quantitative Approach of Reversible Logic Gates in QCA

2015 ◽  
Vol 3 ◽  
pp. 22 ◽  
Author(s):  
Abdullah Al Shafi ◽  
Ali Newaz Bahar ◽  
Md Shifatul Islam
Keyword(s):  
Low Power ◽  
Vlsi Design ◽  
Processing System ◽  
Digital Signal ◽  
Complementary Metal Oxide Semiconductor ◽  
Logic Gates ◽  
Cmos Technology ◽  
Reversible Logic ◽  
Oxide Semiconductor ◽  
Switching Frequency

Abstract—Quantum Dot Cellular Automata (QCA) is an eminent nano-technology and solution of Complementary Metal Oxide Semiconductor (CMOS) for it’s computation and transformation procedure. It is attractive for it’s size, faster speed, high scalable feature, low power consumption and higher switching frequency compared to CMOS technology. Reversible logic has many factual operation in QCA as well as VLSI design, nanotechnology, digital signal processing (DSP). This paper presents a systematic design of reversible gate based on QCA. A modified pattern of Fredkin gate, MCL gate and a new scheme of URG gate, BJN gate is proposed in this paper. For design and verification QCADesigner, a widely used simulation tool is employed. The proposed circuits can be used in erecting of nano scale low power information processing system and modelingcomplex computing systems.

Computational study of the staircase molecular conductivity of polyoxovanadates adsorbed on Au(111)

2021 ◽  
Vol 50 (16) ◽  
pp. 5540-5551
Author(s):  
Almudena Notario-Estévez ◽  
Xavier López ◽  
Coen de Graaf
Keyword(s):  
Metal Oxide ◽  
Computational Study ◽  
Complementary Metal Oxide Semiconductor ◽  
Cmos Technology ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Molecular Conduction ◽  
Conduction Properties ◽  
Molecular Conductivity

This computational study presents the molecular conduction properties of polyoxovanadates V6O19 (Lindqvist-type) and V18O42, as possible successors of the materials currently in use in complementary metal–oxide semiconductor (CMOS) technology.

scholarly journals Investigation of PVT-Aware STT-MRAM Sensing Circuits for Low-VDD Scenario

Micromachines ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 551
Author(s):  
Zhongjian Bian ◽  
Xiaofeng Hong ◽  
Yanan Guo ◽  
Lirida Naviner ◽  
Wei Ge ◽  
...  
Keyword(s):  
Nonvolatile Memory ◽  
High Speed ◽  
Low Voltage ◽  
Supply Voltage ◽  
Random Access ◽  
Magnetic Tunnel Junction ◽  
Complementary Metal Oxide Semiconductor ◽  
Current Mode ◽  
Cmos Technology ◽  
Oxide Semiconductor

Spintronic based embedded magnetic random access memory (eMRAM) is becoming a foundry validated solution for the next-generation nonvolatile memory applications. The hybrid complementary metal-oxide-semiconductor (CMOS)/magnetic tunnel junction (MTJ) integration has been selected as a proper candidate for energy harvesting, area-constraint and energy-efficiency Internet of Things (IoT) systems-on-chips. Multi-VDD (low supply voltage) techniques were adopted to minimize energy dissipation in MRAM, at the cost of reduced writing/sensing speed and margin. Meanwhile, yield can be severely affected due to variations in process parameters. In this work, we conduct a thorough analysis of MRAM sensing margin and yield. We propose a current-mode sensing amplifier (CSA) named 1D high-sensing 1D margin, high 1D speed and 1D stability (HMSS-SA) with reconfigured reference path and pre-charge transistor. Process-voltage-temperature (PVT) aware analysis is performed based on an MTJ compact model and an industrial 28 nm CMOS technology, explicitly considering low-voltage (0.7 V), low tunneling magnetoresistance (TMR) (50%) and high temperature (85 °C) scenario as the worst sensing case. A case study takes a brief look at sensing circuits, which is applied to in-memory bit-wise computing. Simulation results indicate that the proposed high-sensing margin, high speed and stability sensing-sensing amplifier (HMSS-SA) achieves remarkable performance up to 2.5 GHz sensing frequency. At 0.65 V supply voltage, it can achieve 1 GHz operation frequency with only 0.3% failure rate.

Deep-Submicron Single-Gate Complementary Metal Oxide Semiconductor (CMOS) Technology Using Channel Preamorphization

1998 ◽  
Vol 37 (Part 1, No. 3B) ◽  
pp. 1050-1053 ◽  
Author(s):  
Masayasu Miyake ◽  
Toshio Kobayashi ◽  
Yutaka Sakakibara ◽  
Kimiyoshi Deguchi ◽  
Mitsutoshi Takahashi
Keyword(s):  
Metal Oxide ◽  
Complementary Metal Oxide Semiconductor ◽  
Cmos Technology ◽  
Deep Submicron ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor

A 60 GHz reconfigurable active phase shifter based on a vector modulator in 65 nm CMOS technology

2016 ◽  
Vol 8 (3) ◽  
pp. 399-404 ◽  
Author(s):  
Boris Moret ◽  
Nathalie Deltimple ◽  
Eric Kerhervé ◽  
Baudouin Martineau ◽  
Didier Belot
Keyword(s):  
Phase Shift ◽  
Phase Shifter ◽  
Complementary Metal Oxide Semiconductor ◽  
Active Phase ◽  
Cmos Technology ◽  
Oxide Semiconductor ◽  
60 Ghz ◽  
Semiconductor Technology ◽  
Vector Modulator ◽  
Active Phase Shifter

This paper presents a 60 GHz reconfigurable active phase shifter based on a vector modulator implemented in 65 nm complementary metal–oxide–semiconductor technology. This circuit is based on the recombination of two differential paths in quadrature. The proposed vector modulator allows us to generate a phase shift between 0° and 360°. The voltage gain varies between −13 and −9 dB in function of the phase shift generated with a static consumption between 26 and 63 mW depending on its configuration.

scholarly journals Performance Comparison of Carry-Lookahead and Carry-Select Adders Based on Accurate and Approximate Additions

Electronics ◽  
2018 ◽  
Vol 7 (12) ◽  
pp. 369 ◽  
Author(s):  
Padmanabhan Balasubramanian ◽  
Nikos Mastorakis
Keyword(s):  
High Speed ◽  
Digital Signal ◽  
Complementary Metal Oxide Semiconductor ◽  
Performance Comparison ◽  
Oxide Semiconductor ◽  
Cmos Process ◽  
Least Significant Bit ◽  
Design Metrics ◽  
Ripple Carry Adder ◽  
Speed Performance

Addition is a fundamental operation in microprocessing and digital signal processing hardware, which is physically realized using an adder. The carry-lookahead adder (CLA) and the carry-select adder (CSLA) are two popular high-speed, low-power adder architectures. The speed performance of a CLA architecture can be improved by adopting a hybrid CLA architecture which employs a small-size ripple-carry adder (RCA) to replace a sub-CLA in the least significant bit positions. On the other hand, the power dissipation of a CSLA employing full adders and 2:1 multiplexers can be reduced by utilizing binary-to-excess-1 code (BEC) converters. In the literature, the designs of many CLAs and CSLAs were described separately. It would be useful to have a direct comparison of their performances based on the design metrics. Hence, we implemented homogeneous and hybrid CLAs, and CSLAs with and without the BEC converters by considering 32-bit accurate and approximate additions to facilitate a comparison. For the gate-level implementations, we considered a 32/28 nm complementary metal-oxide-semiconductor (CMOS) process targeting a typical-case process–voltage–temperature (PVT) specification. The results show that the hybrid CLA/RCA architecture is preferable among the CLA and CSLA architectures from the speed and power perspectives to perform accurate and approximate additions.

A 31 GHz body-biased configurable power amplifier in 28 nm FD-SOI CMOS for 5 G applications

2020 ◽  
pp. 1-18
Author(s):  
Florent Torres ◽  
Eric Kerhervé ◽  
Andreia Cathelin ◽  
Magali De Matos
Keyword(s):  
Power Amplifier ◽  
Complementary Metal Oxide Semiconductor ◽  
Cmos Technology ◽  
Silicon On Insulator ◽  
Oxide Semiconductor ◽  
Fully Depleted ◽  
Technology Roadmap ◽  
Wide Range ◽  
28 Nm ◽  
Soi Cmos

Abstract This paper presents a 31 GHz integrated power amplifier (PA) in 28 nm Fully Depleted Silicon-On-Insulator Complementary Metal Oxide Semiconductor (FD-SOI CMOS) technology and targeting SoC implementation for 5 G applications. Fine-grain wide range power control with more than 10 dB tuning range is enabled by body biasing feature while the design improves voltage standing wave ratio (VSWR) robustness, stability and reverse isolation by using optimized 90° hybrid couplers and capacitive neutralization on both stages. Maximum power gain of 32.6 dB, PAEmax of 25.5% and Psat of 17.9 dBm are measured while robustness to industrial temperature range and process spread is demonstrated. Temperature-induced performance variation compensation, as well as amplitude-to-phase modulation (AM-PM) optimization regarding output power back-off, are achieved through body-bias node. This PA exhibits an International Technology Roadmap for Semiconductors figure of merit (ITRS FOM) of 26 925, the highest reported around 30 GHz to authors' knowledge.

A Bio-inspired and Low-power 2D Machine Vision with Adaptive Machine Learning and Forgetting

2021 ◽  
Author(s):  
Akhil Dodda ◽  
Darsith Jayachandran ◽  
Shiva Subbulakshmi Radhakrishnan ◽  
Saptarshi Das
Keyword(s):  
Machine Vision ◽  
Energy Gap ◽  
Critical Role ◽  
Visual Stimuli ◽  
Bright Light ◽  
Complementary Metal Oxide Semiconductor ◽  
Active Role ◽  
Cmos Technology ◽  
Oxide Semiconductor ◽  
Large Area

Abstract Natural intelligence has many dimensions, and in animals, learning about the environment and making behavioral changes are some of its manifestations. In primates vision plays a critical role in learning. The underlying biological neural networks contain specialized neurons and synapses which not only sense and process the visual stimuli but also learns and adapts, with remarkable energy efficiency. Forgetting also plays an active role in learning. Mimicking the adaptive neurobiological mechanisms for seeing, learning, and forgetting can, therefore, accelerate the development of artificial intelligence (AI) and bridge the massive energy gap that exists between AI and biological intelligence. Here we demonstrate a bio-inspired machine vision based on large area grown monolayer 2D phototransistor array integrated with analog, non-volatile, and programmable memory gate-stack that not only enables direct learning, and unsupervised relearning from the visual stimuli but also offers learning adaptability under photopic (bright-light), scotopic (low-light), as well as noisy illumination conditions at miniscule energy expenditure. In short, our “all-in-one” hardware vision platform combines “sensing”, “computing” and “storage” not only to overcome the von Neumann bottleneck of conventional complementary metal oxide semiconductor (CMOS) technology but also to eliminate the need for peripheral circuits and sensors.

Sign in / Sign up

Export Citation Format

Share Document