scholarly journals Harvesting Technologies and Costs of Biomass Production from Energy Crops Cultivated on Farms in the Małopolska Region

Energies ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 131
Author(s):  
Dariusz Kwaśniewski ◽  
Aleksandra Płonka ◽  
Paweł Mickiewicz
Keyword(s):  
Biomass Production ◽  
Energy Crops ◽  
Production Costs ◽  
Computer Application ◽  
A Value ◽  
Miscanthus Giganteus ◽  
The Cost ◽  
Perennial Energy Crops

This study aimed to assess biomass production costs from perennial energy crops, such as Miscanthus giganteus, Sida hermaphrodita, and coppiced willow, in selected agricultural holdings. This assessment was based on applied technologies for harvesting the biomass of the energy crops mentioned above. The scope of the study included research on ten farms located in Małopolska and establishing the possibility of biomass production from selected energy crops in these entities. Biomass production costs have been estimated using the computer application “Bioalkylation”. The result of the research was the answer to the question: what can be the cost range of biomass production from perennial energy crops for the crops Miscanthus giganteus, Sida hermaphrodita, and coppiced willow as the most popular plants? The study shows that production costs depend primarily on the harvesting technology used and the machinery used in the farm. The harvest with rotary mowers, small presses, and windrows was applied regarding Miscanthus giganteus and Sida hermaphrodita. The costs of biomass production were, on average, 424.7 EUR ha−1 for Miscanthus giganteus and 278.9 EUR ha−1 for Sida hermaphrodita. Concerning tonne, this was 37.6 EUR t−1 for Miscanthus giganteus and 30.0 EUR t−1 for Sida hermaphrodita, respectively. In the case of harvesting energy willow, in the form of whole shoots, inefficient and labour-intensive technologies using chainsaws and combustion cutters were applied. The biomass production costs were thus the highest among the assessed plants and amounted, on average, to 612.1 EUR ha−1, which in terms of tonne corresponded to a value of 30.6 EUR. The obtained results and the analysis presented in the paper may help in planning the cultivation of perennial energy crops in order to obtain biomass used for heating purposes on a farm.

scholarly journals Quantifying the peak yields of four cellulosic bioenergy crops in the East-Central Poland.

2020 ◽  
Vol 75 (1) ◽  
pp. 29-41
Author(s):  
ROMAN MOLAS ◽  
HALINA BORKOWSKA ◽  
DOMINIKA SKIBA ◽  
ALEKSANDRA GŁOWACKA
Keyword(s):  
Shoot Density ◽  
Energy Crops ◽  
Bioenergy Crops ◽  
Salix Viminalis ◽  
Long Term Study ◽  
Miscanthus Giganteus ◽  
Miscanthus Sacchariflorus ◽  
Shoot Number ◽  
Cellulosic Bioenergy ◽  
Perennial Energy Crops

Through the six successive years (2010–2015), from the 5th to the 10th year of cultivation, research was carried out on yielding and species characteristics of 4 perennial vegetatively propagated energy crops. These were: 2 species of Miscanthus, Sida hermaphrodita, and 2 Salix viminalis clones (1047 and 1054), cultivated side-by-side. The height and shoot number, yield and biomass moisture were evaluated. The highest shoot density of Miscanthus sacchariflorus was found, while the largest yield of Miscanthus × giganteus. Salix viminalis and Miscanthus × giganteus biomass was characterized by the highest content of accumulated moisture (on average 50%). The Sida hermaphrodita plants were appeared as the tallest ones on the six-year average. It is worth mentioning, we have concluded that yield of Miscanthus, and Sida is high and stable in the long-term study. However, in the average yields of these 2 species (Miscanthus × giganteus and Sida hermaphrodita) no statistically significant differences were found. Results can strengthen the improved species diversity in perennial energy crops cultivation.

scholarly journals Profitability of biomass production in relation to harvesting technology

2020 ◽  
Vol 154 ◽  
pp. 01010
Author(s):  
Dariusz Kwaśniewski ◽  
Maciej Kuboń ◽  
Urszula Malaga-Toboła
Keyword(s):  
Theoretical Calculation ◽  
Surface Area ◽  
Biomass Production ◽  
Production Costs ◽  
The Other ◽  
Product Form ◽  
Computer Application ◽  
Other Hand

The aim of the paper was to determine the production costs and profitability of biomass production from Virginia mallow including various harvesting technologies. The paper covered theoretical calculation of the production costs of biomass form Virginia mallow with the use of the computer application “Biocalculator”. Calculations were made for a plantation with the surface area of 5 ha and four technologies of harvesting and the product form (pressed straw, chaff). The paper determines the profitability of production of biomass from Virginia mallow for four variants of sale prices of biomass at the level of 100, 120, 140 and 150 PLN∙t-1. In case of T1 technology all assumed prices of sale of Virginia mallow biomass with the obtained production costs were profitable. On the other hand, in T3 and T4 technology, the scope of sale prices from 120 to 150 PLN∙t-1 caused that the biomass production was profitable. While, the least profitable was application of T2 technology where only at the assessment of biomass sale 150 PLN∙t-1 production was profitable and in the remaining price options the profit was not obtained.

scholarly journals Design of the Vertical Roundness Tester Machine Using the AHP Method (Analytical Hierarchy Process) Through the DFM Approach (Design for Manufacturing)

2021 ◽  
Vol 65 (2) ◽  
pp. 68-76
Author(s):  
Agus Reforiandi ◽  
◽  
Dodi Sofyan Arief ◽  
Keyword(s):  
Optimal Design ◽  
Analytical Hierarchy Process ◽  
Design For Manufacturing ◽  
Production Costs ◽  
Manufacturing Cost ◽  
A Value ◽  
The Cost ◽  
Hierarchy Process ◽  
Alternative Decision ◽  
Process Method

The Roundness Tester Machine is a tool used to take measurements that are shown to check the Roundness of an object or to find out whether an object is really round or not when viewed carefully using a measuring instrument. DFM (Design for Manufacturing) is a method for reducing production costs by estimating production costs through reducing component costs, assembly costs, and other production supporting costs based on design submission data without reducing product quality. AHP (Analytical Hierarchy Process) method was chosen as a method to determine the optimal Vertical Roundness Tester Machine design based on a questionnaire given to the expert, to choose the best alternative decision. The questionnaire was created to get priority customer needs which was then used for the initial design. The next stage is selecting the optimal design using AHP which involves experts based on indicators of a product. The highest indicator value obtained on the Vertical Roundness Tester Machine is the accuracy indicator with a value of 48.52%. Then in choosing the optimal design in the DFM analysis, namely in alternative 3, where alternative 3 is the design with the lowest cost so as to minimize the cost of making a Vertical Roundness Tester Machine. The manufacturing cost for alternative design 3 is Rp. 4,173,000.

REKAYASA NILAI HARGA PEMBUATAN TERHADAP EFEKTIFITAS PENGGUNAAN BAHAN PADA PEMBANGUNAN PERUMAHAN TIRTO PENATARAN ASRI TIPE 70/135 KECAMATAN NGLEGOK KABUPATEN BLITAR

2017 ◽  
Vol 7 (1) ◽  
pp. 43-52
Author(s):  
Mochamad Tamim Ma’ruf
Keyword(s):  
Engineering Application ◽  
Cost Savings ◽  
Comparison Method ◽  
Value Engineering ◽  
Design Work ◽  
Housing Projects ◽  
Initial Design ◽  
A Value ◽  
The Cost ◽  
Design Proposal

One-solving methods and techniques necessary to avoid inefficiencies and not economic costs as well as reduce the cost of housing construction is the method of Value Engineering. Value engineering is a method and cost control techniques to analyze a function to its value at the lowest cost alternative (most economical) without reducing the quality desired.At the writing of this study used a comparison method by comparing the initial design to the design proposal of the author. In the housing projects Upgrading Tirto Penataran Asri type 70, the application of Value Engineering conducted on the job a couple walls and roofs pair by replacing some work items with a more economical alternative but does not change the original function and high aesthetic level and still qualify safe. For that performed the step of determining a work item, the alternative stage, the analysis stage, and the stage of recommendations to get a Value Engineering application and cost savings against the wall a couple of work items and partner roof.The proposed design as compared to the initial design. Work items discussed was the work of a couple wall having analyzed obtained savings of Rp. 2,747,643.56 and the work of the roof pair obtained savings of Rp. 2,363,446.80. Thus the total overall savings gained is Rp 5,111,090.36 or savings of 0048%.

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

scholarly journals Monitoring the technological processes in the wood industry in order to make them more efficient through technical overhauling

2019 ◽  
Vol 290 ◽  
pp. 02007
Author(s):  
Radu Dan Paltan ◽  
Cristina Biriş ◽  
Loredana Anne-Marie Rădulescu
Keyword(s):  
Automotive Industry ◽  
Operating Mode ◽  
Solid Wood ◽  
Production Costs ◽  
Operating Costs ◽  
Future Research ◽  
Wood Industry ◽  
Research Article ◽  
State Of Research ◽  
The Cost

Of many techniques that are used to optimize production and costs, the studies conducted within a profile company lead to our choice for testing the 6Sigma method (the most used method in the automotive industry) in view of the economic efficiency applied in the wood Industry company. This method measures how many flaws exist in a process and determines in a systematic way how to improve it by technical overhauling and eliminating or minimizing the process for efficiency. This research article aims to study the state of research on the optimization of the production process through technical overhauling for panels reconstituted from solid wood and ways to make production more efficient by cutting costs through technical overhauling. From preliminary research, we estimate that all the items founded and others that will result from further research will result in a significant decrease in production costs that are reflected in the cost of the finished product and consequently in increasing the yield of the company by maximizing its profit. At the same time it may be the basis of future research studies in the field. The easier it is to maximize profits, the lower the operating costs are and the higher recovery rate of investments are, that will result a change in the operating mode: “working smarter not harder”.

scholarly journals Bioethanolic yeasts from dung beetles: tapping the potential of extremophilic yeasts for improvement of lignocellulolytic feedstock fermentation

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Anita Ejiro Nwaefuna ◽  
Karl Rumbold ◽  
Teun Boekhout ◽  
Nerve Zhou
Keyword(s):  
Treatment Process ◽  
Dung Beetles ◽  
Production Costs ◽  
Industrial Wastes ◽  
Major Drawback ◽  
Renewable Fuel ◽  
Extreme Stress ◽  
Pre Treatment ◽  
The Cost ◽  
Simultaneous Saccharification

AbstractBioethanol from abundant and inexpensive agricultural and industrial wastes possesses the potential to reduce greenhouse gas emissions. Bioethanol as renewable fuel addresses elevated production costs, as well as food security concerns. Although technical advancements in simultaneous saccharification and fermentation have reduced the cost of production, one major drawback of this technology is that the pre-treatment process creates environmental stressors inhibitory to fermentative yeasts subsequently reducing bioethanol productivity. Robust fermentative yeasts with extreme stress tolerance remain limited. This review presents the potential of dung beetles from pristine and unexplored environments as an attractive source of extremophilic bioethanolic yeasts. Dung beetles survive on a recalcitrant lignocellulose-rich diet suggesting the presence of symbiotic yeasts with a cellulolytic potential. Dung beetles inhabiting extreme stress environments have the potential to harbour yeasts with the ability to withstand inhibitory environmental stresses typically associated with bioethanol production. The review further discusses established methods used to isolate bioethanolic yeasts, from dung beetles.

scholarly journals Legal Complexities of Animal Welfare in Australia: Do On-Animal Sensors Offer a Future Option?

Animals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 91
Author(s):  
Jaime Manning ◽  
Deborah Power ◽  
Amy Cosby
Keyword(s):  
Animal Welfare ◽  
Data Transmission ◽  
Continuous Measurement ◽  
Mental Wellbeing ◽  
Value Proposition ◽  
Data Governance ◽  
Behavioural State ◽  
A Value ◽  
Welfare Measures ◽  
The Cost

The five freedoms and, more recently, the five domains of animal welfare provide internationally recognised frameworks to evaluate animal welfare practices which recognise both the physical and mental wellbeing needs of animals, providing a balanced view of their ability to cope in their environment. Whilst there are many techniques to measure animal welfare, the challenge lies with how best to align these with future changes in definitions and expectations, advances in science, legislative requirements, and technology improvements. Furthermore, enforcement of current animal welfare legislation in relation to livestock in Australia and the reliance on self-audits for accreditation schemes, challenges our ability to objectively measure animal welfare. On-animal sensors have enormous potential to address animal welfare concerns and assist with legislative compliance, through continuous measurement and monitoring of an animal’s behavioural state and location being reflective of their wellbeing. As reliable animal welfare measures evolve and the cost of on-animal sensors reduce, technology adoption will increase as the benefits across the supply chain are realised. Future adoption of on-animal sensors by producers will primarily depend on a value proposition for their business being clear; algorithm development to ensure measures are valid and reliable; increases in producer knowledge, willingness, and trust in data governance; and improvements in data transmission and connectivity.

scholarly journals Growth and biochemical composition of Chlorella vulgaris in different growth media

2013 ◽  
Vol 85 (4) ◽  
pp. 1427-1438 ◽  
Author(s):  
MATHIAS A. CHIA ◽  
ANA T. LOMBARDI ◽  
MARIA DA GRACA G. MELAO
Keyword(s):  
Biomass Production ◽  
Chlorella Vulgaris ◽  
Biochemical Composition ◽  
Physiological Response ◽  
Low Cost ◽  
Cost Effective ◽  
Growth Conditions ◽  
Growth Media ◽  
Continuous Cultures ◽  
The Cost

The need for clean and low-cost algae production demands for investigations on algal physiological response under different growth conditions. In this research, we investigated the growth, biomass production and biochemical composition of Chlorella vulgaris using semi-continuous cultures employing three growth media (LC Oligo, Chu 10 and WC media). The highest cell density was obtained in LC Oligo, while the lowest in Chu medium. Chlorophyll a, carbohydrate and protein concentrations and yield were highest in Chu and LC Oligo media. Lipid class analysis showed that hydrocarbons (HC), sterol esthers (SE), free fatty acids (FFA), aliphatic alcohols (ALC), acetone mobile polar lipids (AMPL) and phospholipids (PL) concentrations and yields were highest in the Chu medium. Triglyceride (TAG) and sterol (ST) concentrations were highest in the LC Oligo medium. The results suggested that for cost effective cultivation, LC Oligo medium is the best choice among those studied, as it saved the cost of buying vitamins and EDTA associated with the other growth media, while at the same time resulted in the best growth performance and biomass production.

Sign in / Sign up

Export Citation Format

Share Document