scholarly journals Impact of Different Components and Boundary Conditions on the Eigenfrequencies of a Magnet–Girder Assembly

Instruments ◽  
2021 ◽  
Vol 5 (3) ◽  
pp. 29
Author(s):  
Simone Andresen

Synchrotron radiation facilities are very important in different areas of fundamental and applied science to investigate structures or processes at small scales. Magnet–girder assemblies play a key role for the performance of such accelerator machines. High structural eigenfrequencies of the magnet–girder assemblies are required to assure a sufficient particle beam stability. The objective of the present parametric study was to numerically investigate and quantify the impact of different boundary conditions and components on the magnet–girder eigenfrequencies. As case studies, two 3 m long girder designs following the specifications of the PETRA IV project at DESY (German Electron Synchrotron, Hamburg, Germany) were selected. High magnet–girder assembly eigenfrequencies were achieved by, e.g., positioning the magnets close to the upper girder surface, increasing the connection stiffness between the magnets and the girder and between the girder and the bases, and positioning the girder support points as high as possible in the shape of a large triangle. Comparing the E/ρ ratio (E: Young’s modulus, ρ: material density) of different materials was used as a first approach to evaluate different materials for application to the girder. Based on the findings, general principles are recommended to be considered in the future girder design development processes.




1985 ◽  
Vol 17 (9) ◽  
pp. 1-12 ◽  
Author(s):  
Carl G. Enfield

Relatively immobile chemicals have been observed moving significantly faster than anticipated from hydrophobic theory. A theory is developed considering transport in three mobile fluid phases which can be used to describe this facilitated transport. The convective dispersive transport equation is solved utilizing a transformation of variables which permits utilizing existing solutions covering a wide variety of boundary conditions. The impact of the facilitated transport is demonstrated for one case where the soils organic carbon is 10%. If 2% of the fluid phase is an organic fraction, the theory developed projects that hydrophobic theory may underestimate mobility by more than 100 times. At concentrations of dissolved organic carbon normally observed in nature (5 - 10 mg/l), a measurable increased mobility is anticipated for the very immobile compounds like dioxins.



2021 ◽  
Vol 13 (4) ◽  
pp. 168781402110094
Author(s):  
Ibrahim Elnasri ◽  
Han Zhao

In this study, we numerically investigate the impact perforation of sandwich panels made of 0.8 mm 2024-T3 aluminum alloy skin sheets and graded polymeric hollow sphere cores with four different gradient profiles. A suitable numerical model was conducted using the LS-DYNA code, calibrated with an inverse perforation test, instrumented with a Hopkinson bar, and validated using experimental data from the literature. Moreover, the effects of quasi-static loading, landing rates, and boundary conditions on the perforation resistance of the studied graded core sandwich panels were discussed. The simulation results showed that the piercing force–displacement response of the graded core sandwich panels is affected by the core density gradient profiles. Besides, the energy absorption capability can be effectively enhanced by modifying the arrangement of the core layers with unclumping boundary conditions in the graded core sandwich panel, which is rather too hard to achieve with clumping boundary conditions.



Economies ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 42
Author(s):  
Maria Adamakou ◽  
Dimitris Kallioras ◽  
George Petrakos

Universities are emerging growth determinants. This is so as, in addition to the fulfillment of their traditional role in teaching and (basic) research, universities, as aptly described within the helix framework, are expected to engage in regional development processes. The paper aims to detect trends of convergence among EU universities in terms of performance. To the best of our knowledge, this topic has not hitherto been examined. The empirical analysis of the paper covers the period 2014–2021, utilizes data obtained from URAP (University Ranking by Academic Performance), and employs the methodological approach of convergence clubs. The findings of the paper provide valuable insight into both theory and policy-making. We conclude that despite the unification of EU educational space, trends of divergence among EU universities are still present, and notable divisions still remain. Consequently, this indicates that the impact of EU universities on the formation of spatial disparities across EU space is not neutral.



2012 ◽  
Vol 10 (H16) ◽  
pp. 478-479
Author(s):  
Patrick Michel ◽  

AbstractNEOShield is a European-Union funded project coordinated by the German Aero-space Center, DLR, to address near-Earth object (NEO) impact hazard mitigation issues. The NEOShield consortium consists of 13 research institutes, universities, and industrial partners from 6 countries and includes leading US and Russian space organizations. The project is funded for a period of 3.5 years from January 2012 with a total of 5.8 million euros. The primary aim of the project is to investigate in detail promising mitigation techniques, such as the kinetic impactor, blast deflection, and the gravity tractor, and devise feasible demonstration missions. Options for an international strategy for implementation when an actual impact threat arises will also be investigated.The NEOShield work plan consists of scientific investigations into the nature of the impact hazard and the physical properties of NEOs, and technical and engineering studies of practical means of deflecting NEOs. There exist many ideas for asteroid deflection techniques, many of which would require considerable scientific and technological development. The emphasis of NEOShield is on techniques that are feasible with current technology, requiring a minimum of research and development work. NEOShield aims to provide detailed designs of feasible mitigation demonstration missions, targeting NEOs of the kind most likely to trigger the first space-based mitigation action.Most of the asteroid deflection techniques proposed to date require physical contact with the threatening object, an example being the kinetic impactor. NEOShield includes research into the mitigation-relevant physical properties of NEOs on the basis of remotely-sensed astronomical data and the results of rendezvous missions, the observational techniques required to efficiently gather mitigation-relevant data on the dynamical state and physical properties of a threatening NEO, and laboratory investigations using gas guns to fire projectiles into asteroid regolith analog materials. The gas-gun investigations enable state-of-the-art numerical models to be verified at small scales. Computer simulations at realistic NEO scales are used to investigate how NEOs with a range of properties would respond to a pulse of energy applied in a deflection attempt. The technical work includes the development of crucial technologies, such as the autonomous guidance of a kinetic impactor to a precise point on the surface of the target, and the detailed design of realistic missions for the purpose of demonstrating the applicability and feasibility of one or more of the techniques investigated. Theoretical work on the blast deflection method of mitigation is designed to probe the circumstances in which this last line of defense may be the only viable option and the issues relating to its deployment. A global response campaign roadmap will be developed based on realistic scenarios presented, for example, by the discovery of an object such as 99942 Apophis or 2011 AG5 on a threatening orbit. The work will include considerations of the timeline of orbit knowledge and impact probability development, reconnaissance observations and fly-by or rendezvous missions, the political decision to mount a mitigation attempt, and the design, development, and launch of the mitigation mission. Collaboration with colleagues outside the NEOShield Consortium involved in complementary activities (e.g. under the auspices of the UN, NASA, or ESA) is being sought in order to establish a broad international strategy.We present a brief overview of the history and planned scope of the project, and progress made to date.The NEOShield project (http://www.neoshield.net) has received funding from the European Union Seventh Framework Program (FP7/2007-2013) under Grant Agreement no. 282703.



2011 ◽  
Vol 4 ◽  
pp. 4828-4834 ◽  
Author(s):  
D.J. Smith ◽  
D.J. Noy ◽  
S. Holloway ◽  
R.A. Chadwick


2020 ◽  
Vol 9 (4) ◽  
pp. 362-374
Author(s):  
J. C. Umavathi ◽  
Ali J. Chamkha

Nanotechnology has infiltrated into duct design in parallel with many other fields of mechanical, medical and energy engineering. Motivated by the excellent potential of nanofluids, a subset of materials engineered at the nanoscale, in the present work, a new mathematical model is developed for natural convection in a vertical duct containing nanofluid. Numerical scrutiny for the double-diffusive free and forced convection within a duct encumbered with nanofluid is performed. Buongiorno’s model is deployed to define the nanofluid. Robin boundary conditions are used to define the surface boundary conditions. Thermal and concentration equations envisage the viscous, Brownian motion, thermosphores of the nanofluid, Soret and Dufour effects. Using the Boussi-nesq approximation the solutal buoyancy effect as a result of gradients in concentration are incorporated. The conservation equations which are nonlinear are numerically estimated using fourth order Runge-Kutta methodology and analytically ratifying regular perturbation scheme. The mass, heat, nanoparticle concentration and species concentration fields on eight dimensionless physical parameters such as thermal and mass Grashof numbers, Brownian motion parameter, thermal parameter, Prandtl number, Eckert number, Schmidt parameter, and Soret parameter are calculated. The impact of these parameters are outlined pictorially. The velocity and temperature fields are boosted with the thermal Grashof number. The Soret and the Schemidt parameters reduces the nanoparticle volume fraction but it heightens the momentum, temperature and concentration. At the cold wall thermal and concentration Grashof numbers reduces the Nusselt values but they increase the Nusselt values at the hot wall. The reversal consequence was attained at the hot plate. The perturbation and Runge-Kutta solutions are equal in the nonappearance of Prandtl number. The (E. Zanchini, Int. J. Heat Mass Transfer 41, 3949 (1998)). results are restored for the regular fluid. The heat transfer rate is high for nanofluid when matched with regular fluid.



2014 ◽  
Vol 564 ◽  
pp. 176-181
Author(s):  
S.T. Cheng ◽  
Nawal Aswan Abdul Jalil ◽  
Zamir A. Zulkefli

Vibration based technique have so far been focused on the identification of structural damage. However, not many studies have been conducted on the corrosion identification on pipes. The objective of this paper is to identify corrosion on pipes from vibration measurements. A hollow pipe, 500 mm in length with 63.5 mm in diameter was subjected to impact loading using an impact hammer to identify the natural frequency of the tube in two conditions i) without any corrosion and ii) with an induced localized 40 mm by 40 mm corrosion at the middle of the pipe. The shift of natural frequencies of the structures under free boundary conditions was examined for each node of excitation. The results showed that there is a shift in natural frequency of the pipe, between 3 and 4 Hz near to the corrosion area. It can suggested that that the impact vibration is capable of identifying of localized corrosion on a hollow tube.



1964 ◽  
Vol 19 (2) ◽  
pp. 231-239 ◽  
Author(s):  
F. Winterberg

In this paper it is shown that temperatures up to 108°K and under densities of the order 1 g/cm3 are attainable in liquid tritium-deuterium by the impact shock waves of small solid particles accelerated up to velocities of some 107 cm/s in heavy particle accelerators.The high temperatures occur in a focussed particle beam. It is shown that under feasible conditions, the particle beam will generate in the target material a shock wave of the required strength. The particles are charged electrically up to the limit of mechanical breakup and then are accelerated in linear particle accelerators to the required velocities.In order to cut down losses by Bremsstrahlung radiation, the particles must consist of low Z-value material. The most promissing substances in this regard are lithium and beryllium. The "guillotine factor” is of significance at high densities and reduces the Bremsstrahlung losses by a factor of about 1/3.The attainable temperatures are high enough to reach the lowest ignition temperatures for thermonuclear reactions.Apart from the interesting prospect of high temperature, high density experiments, the possibility cannot be excluded to ignite by this method a small fusion explosion of controllable size.



Sign in / Sign up

Export Citation Format

Share Document