scholarly journals Risk Comparison of the Diarrheal and Emetic Type of Bacillus cereus in Tofu

2019 ◽  
Vol 7 (11) ◽  
pp. 536 ◽  
Author(s):  
Mi Jin Kwon ◽  
Chae Lim Lee ◽  
Ki Sun Yoon

We investigated the ability of biofilm formation, survival, and behavior of diarrheal and emetic Bacillus cereus vegetative cells and spores in tofu. Both diarrheal and emetic B. cereus did not proliferate at a temperature below 9 °C in tofu. However, the emetic B. cereus grew faster than diarrheal B. cereus at 11 °C and had better survival ability at low temperatures. Both diarrheal and emetic B. cereus were able to form a biofilm on stainless steel. These biofilm cells were transferred to tofu in live state. The transferred biofilm cells could not grow at a temperature below 9 °C but grew over 11 °C, like planktonic cells. B. cereus contamination in tofu at a high concentration (>6 logs CFU/g) was not entirely killed by heating at 80, 85, or 90 °C for 2 h. Spores and emetic B. cereus had higher resistance to heat than vegetative cells and diarrheal B. cereus, respectively.

2005 ◽  
Vol 68 (12) ◽  
pp. 2614-2622 ◽  
Author(s):  
JEE-HOON RYU ◽  
LARRY R. BEUCHAT

Biofilm formation by Bacillus cereus 038-2 on stainless steel coupons, sporulation in the biofilm as affected by nutrient availability, temperature, and relative humidity, and the resistance of vegetative cells and spores in biofilm to sanitizers were investigated. Total counts in biofilm formed on coupons immersed in tryptic soy broth (TSB) at 12 and 22°C consisted of 99.94% of vegetative cells and 0.06% of spores. Coupons on which biofilm had formed were immersed in TSB or exposed to air with 100, 97, 93, or 85% relative humidity. Biofilm on coupons immersed in TSB at 12°C for an additional 6 days or 22°C for an additional 4 days contained 0.30 and 0.02% of spores, respectively, whereas biofilm exposed to air with 100 or 97% relative humidity at 22°C for 4 days contained 10 and 2.5% of spores, respectively. Sporulation did not occur in biofilm exposed to 93 or 85% relative humidity at 22°C. Treatment of biofilm on coupons that had been immersed in TSB at 22°C with chlorine (50 μg/ml), chlorine dioxide (50 μg/ml), and a peroxyacetic acid–based sanitizer (Tsunami 200, 40 μg/ml) for 5 min reduced total cell counts (vegetative cells plus spores) by 4.7, 3.0, and 3.8 log CFU per coupon, respectively; total cell counts in biofilm exposed to air with 100% relative humidity were reduced by 1.5, 2.4, and 1.1 log CFU per coupon, respectively, reflecting the presence of lower numbers of vegetative cells. Spores that survived treatment with chlorine dioxide had reduced resistance to heat. It is concluded that exposure of biofilm formed by B. cereus exposed to air at high relative humidity (≥97%) promotes the production of spores. Spores and, to a lesser extent, vegetative cells embedded in biofilm are protected against inactivation by sanitizers. Results provide new insights to developing strategies to achieve more effective sanitation programs to minimize risks associated with B. cereus in biofilm formed on food contact surfaces and on foods.


2005 ◽  
Vol 71 (1) ◽  
pp. 247-254 ◽  
Author(s):  
Jee-Hoon Ryu ◽  
Larry R. Beuchat

ABSTRACT The resistance of Escherichia coli O157:H7 strains ATCC 43895-, 43895-EPS (an exopolysaccharide [EPS]-overproducing mutant), and ATCC 43895+ (a curli-producing mutant) to chlorine, a sanitizer commonly used in the food industry, was studied. Planktonic cells of strains 43895-EPS and/or ATCC 43895+ grown under conditions supporting EPS and curli production, respectively, showed the highest resistance to chlorine, indicating that EPS and curli afford protection. Planktonic cells (ca. 9 log10 CFU/ml) of all strains, however, were killed within 10 min by treatment with 50 μg of chlorine/ml. Significantly lower numbers of strain 43895-EPS, compared to those of strain ATCC 43895-, attached to stainless steel coupons, but the growth rate of strain 43895-EPS on coupons was not significantly different from that of strain ATCC 43895-, indicating that EPS production did not affect cell growth during biofilm formation. Curli production did not affect the initial attachment of cells to coupons but did enhance biofilm production. The resistance of E. coli O157:H7 to chlorine increased significantly as cells formed biofilm on coupons; strain ATCC 43895+ was the most resistant. Population sizes of strains ATCC 43895+ and ATCC 43895- in biofilm formed at 12�C were not significantly different, but cells of strain ATCC 43895+ showed significantly higher resistance than did cells of strain ATCC 43895-. These observations support the hypothesis that the production of EPS and curli increase the resistance of E. coli O157:H7 to chlorine.


2002 ◽  
Vol 68 (6) ◽  
pp. 2770-2780 ◽  
Author(s):  
Marinda C. Oosthuizen ◽  
Bridgitta Steyn ◽  
Jacques Theron ◽  
Pascal Cosette ◽  
Denise Lindsay ◽  
...  

ABSTRACT Bacillus cereus, a dairy-associated toxigenic bacterium, readily forms biofilms on various surfaces and was used to gain a better understanding of biofilm development by gram-positive aerobic rods. B. cereus DL5 was shown to readily adapt to an attached mode of growth, with dense biofilm structures developing within 18 h after inoculation when glass wool was used as a surface. Two-dimensional gel electrophoresis (2DE) revealed distinct and reproducible phenotypic differences between 2- and 18-h-old biofilm and planktonic cells (grown both in the presence and in the absence of glass wool). Whereas the 2-h-old biofilm proteome indicated expression of 15 unique proteins, the 18-h-old biofilm proteome contained 7 uniquely expressed proteins. Differences between the microcolony (2-h) proteome and the more developed biofilm (18-h) proteome were largely due to up- and down-regulation of the expression of a multitude of proteins. Selected protein spots excised from 2DE gels were subjected to N-terminal sequencing and identified with high confidence. Among the proteins were catabolic ornithine carbamoyltransferase and l-lactate dehydrogenase. Interestingly, increased levels of YhbH, a member of the sigma 54 modulation protein family which is strongly induced in response to environmental stresses and energy depletion via both σB and σH, could be observed within 2 h in both attached cells and planktonic cultures growing in the presence of glass wool, indicating that this protein plays an important role in regulation of the biofilm phenotype. Distinct band differences were also found between the extracellular proteins of 18-h-old cultures grown in the presence and in the absence of glass wool.


2019 ◽  
Vol 49 (7) ◽  
Author(s):  
Bruna Webber ◽  
Amauri Picollo de Oliveira ◽  
Emanuele Serro Pottker ◽  
Luciane Daroit ◽  
Rafael Levandowski ◽  
...  

ABSTRACT: We evaluated the influence of temperature on the ability of Salmonella Enteritidis (SE) to form biofilms on stainless steel, polyethylene, and polyurethane surfaces under different hygiene procedures. These materials were placed on SE culture and incubated at 42±1 ºC, 36±1 ºC, 25±1 ºC, 9±1 ºC, and 3±1 ºC for 4, 8, 12, and 24 h. Hot water at 45 ºC and 85 ºC, 0.5% peracetic acid solution, and 1% quaternary ammonia were used for hygienization. Biofilm formation occurred at all temperatures evaluated, highlighting at 3 ºC which has not been reported as an ideal temperature for the adhesion of SE to these materials. The SE adhered more often to polyethylene surfaces than to polyurethane and stainless steel surfaces (P<0.05). Peracetic acid and water at 85 ºC had similar hygienization efficiency (P<0.05) followed by quaternary ammonia whereas water at 45 ºC was not effective. SE adhered to these materials under low temperatures which to date have been deemed safe for food preservation.


Biofilms ◽  
2005 ◽  
Vol 2 (1) ◽  
pp. 1-7 ◽  
Author(s):  
P. W. Baker ◽  
L. G. Leff

Four bacterial isolates (Chryseobacterium sp., Pseudomonas fluorescens and two Stenotrophomonas maltophilia isolates) originally isolated from the water system aboard the Mir Space Station were grown in two concentrations of nutrient broth under modeled reduced gravity using clinorotation. Sampling was performed over a 7 day period and planktonic cells were enumerated using 4′,6-diamidino-2-phenylindole (DAPI), while those attached to stainless steel were enumerated using the LIVE/DEAD® BacLight™ kit and DAPI. On some of the sampling days for all the isolates, planktonic cell counts were higher under modeled reduced gravity as compared with the normal gravity controls. In contrast, the number of cells of P. fluorescens and one S. maltophilia isolate attached to the stainless steel disks was higher under modeled reduced gravity as compared with normal gravity, whereas no such differences were observed for Chryseobacterium sp. and the other S. maltophilia isolate. Differences in motility among isolates appeared to influence the growth of planktonic cells under modeled reduced gravity but did not appear to be related to biofilm formation.


2005 ◽  
Vol 68 (10) ◽  
pp. 2149-2154 ◽  
Author(s):  
E. GIAOURIS ◽  
N. CHORIANOPOULOS ◽  
G.-J. E. NYCHAS

An assay was developed in an effort to elucidate the effect of important environmental parameters (temperature, pH, and water activity [aw]) on Salmonella Enteritidis biofilm formation on stainless steel surfaces. To achieve this, a modified micro-biological technique used for biofilm studying (the bead vortexing method) and a rapid method based on conductivity measurements were used. The ability of the microorganism to generate biofilm on the stainless surfaces was studied at three temperatures (5, 20, and 37°C), four pH values (4.5, 5.5, 6.5, and 7.4), and four aw values (0.5, 1.5, 5.5, and 10.5% NaCl). Results obtained by the bead vortexing method show that maximum numbers of adherent bacteria per square centimeter (106 CFU/cm2) were attained in 6 days at 20°C. Biofilm formation after 7 days of incubation at 20°C was found to be independent of the pH value. In addition, the high concentration of sodium chloride (10.5% NaCl, aw = 0.94) clearly inhibited the adherence of cells to the coupons. Conductance measurements were used as a supplementary tool to measure indirectly the attachment and biofilm formation of bacterial cells on stainless steel surfaces via their metabolic activity (i.e., changes in the conductance of the growth medium due to microbial growth or metabolism). Results obtained by conductance measurements corresponded well to those of the bead vortexing method. Furthermore, we were able to detect cells that remained attached on the metal surfaces even after vortexing via their metabolic activity. The results, except for demonstrating environmental-dependent Salmonella Enteritidis biofilm formation, indicated that traditional vortexing with beads did not remove completely biofilm cells from stainless steel; hence, conductance measurements seem to provide a more sensitive test capable to detect down to one single viable organism.


2010 ◽  
Vol 76 (6) ◽  
pp. 2018-2022 ◽  
Author(s):  
Nikos G. Chorianopoulos ◽  
Efstathios D. Giaouris ◽  
Yiannis Kourkoutas ◽  
George-John E. Nychas

ABSTRACT Compounds present in Hafnia alvei cell-free culture supernatant cumulatively negatively influence the early stage of biofilm development by Salmonella enterica serovar Enteritidis on stainless steel while they also reduce the overall metabolic activity of S. Enteritidis planktonic cells. Although acylhomoserine lactones (AHLs) were detected among these compounds, the use of several synthetic AHLs was not able to affect the initial stage of biofilm formation by this pathogen.


Alloy Digest ◽  
2013 ◽  
Vol 62 (8) ◽  

Abstract Carpenter CTS-BD30P alloy is a powder metal processed, air-hardening, martensitic stainless steel that offers corrosion resistance comparable with Type 440C stainless, combined with excellent toughness and wear resistance attributed to a high concentration of vanadium carbides. The Carpenter CTS family of alloys is used for many blade applications. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as heat treating and powder metal forms. Filing Code: SS-1154. Producer or source: Carpenter Specialty Alloys.


2020 ◽  
Vol 21 (4) ◽  
pp. 270-286 ◽  
Author(s):  
Fazlurrahman Khan ◽  
Dung T.N. Pham ◽  
Sandra F. Oloketuyi ◽  
Young-Mog Kim

Background: The establishment of a biofilm by most pathogenic bacteria has been known as one of the resistance mechanisms against antibiotics. A biofilm is a structural component where the bacterial community adheres to the biotic or abiotic surfaces by the help of Extracellular Polymeric Substances (EPS) produced by bacterial cells. The biofilm matrix possesses the ability to resist several adverse environmental factors, including the effect of antibiotics. Therefore, the resistance of bacterial biofilm-forming cells could be increased up to 1000 times than the planktonic cells, hence requiring a significantly high concentration of antibiotics for treatment. Methods: Up to the present, several methodologies employing antibiotics as an anti-biofilm, antivirulence or quorum quenching agent have been developed for biofilm inhibition and eradication of a pre-formed mature biofilm. Results: Among the anti-biofilm strategies being tested, the sub-minimal inhibitory concentration of several antibiotics either alone or in combination has been shown to inhibit biofilm formation and down-regulate the production of virulence factors. The combinatorial strategies include (1) combination of multiple antibiotics, (2) combination of antibiotics with non-antibiotic agents and (3) loading of antibiotics onto a carrier. Conclusion: The present review paper describes the role of several antibiotics as biofilm inhibitors and also the alternative strategies adopted for applications in eradicating and inhibiting the formation of biofilm by pathogenic bacteria.


2008 ◽  
Vol 54 (10) ◽  
pp. 861-867 ◽  
Author(s):  
Kanchalee Jetiyanon ◽  
Sakchai Wittaya-Areekul ◽  
Pinyupa Plianbangchang

The plant growth-promoting rhizobacterium Bacillus cereus RS87 was previously reported to promote plant growth in various crops in both greenhouse and field trials. To apply as a plant growth promoting agent with practical use, it is essential to ease the burden of routine preparation of a fresh suspension of strain RS87 in laboratory. The objectives of this study were to investigate the feasibility of film-coating seeds with B. cereus RS87 spores for early plant growth enhancement and to reveal the indoleacetic acid (IAA) production released from strain RS87. The experiment consisted of the following 5 treatments: nontreated seeds, water-soaked seeds, film-coated seeds, seeds soaked with vegetative cells of strain RS87, and film-coated seeds with strain RS87 spores. Three experiments were conducted separately to assess seed emergence, root length, and plant height. Results showed that both vegetative cells and spores of strain RS87 significantly promoted (P ≤ 0.05) seed emergence, root length and plant height over the control treatments. The strain RS87 also produced IAA. In conclusion, the film coating of seeds with spores of B. cereus RS87 demonstrated early plant growth enhancement as well as seeds using their vegetative cells. IAA released from strain RS87 would be one of the mechanisms for plant growth enhancement.


Sign in / Sign up

Export Citation Format

Share Document