scholarly journals Assessing Gut Microbiota in an Infant with Congenital Propionic Acidemia before and after Probiotic Supplementation

2021 ◽  
Vol 9 (12) ◽  
pp. 2599
Author(s):  
Andrea Bordugo ◽  
Elisa Salvetti ◽  
Giulia Rodella ◽  
Michele Piazza ◽  
Alice Dianin ◽  
...  
Keyword(s):  
Gut Microbiota ◽  
Intestinal Bacteria ◽  
Cost Effective ◽  
Propionic Acidemia ◽  
Cardiac Cells ◽  
Starting Point ◽  
Before And After ◽  
Metagenome Sequencing ◽  
Set Up ◽  
Monitoring Protocols

Propionic Acidemia (PA) is a rare inherited metabolic disorder caused by the enzymatic block of propionyl-CoA carboxylase with the consequent accumulation of propionic acid, which is toxic for the brain and cardiac cells. Since a considerable amount of propionate is produced by intestinal bacteria, interest arose in the attempt to reduce propionate-producing bacteria through a monthly antibiotic treatment of metronidazole. In the present study, we investigated the gut microbiota structure of an infant diagnosed at 4 days of life through Expanded Newborn Screening (NBS) and treated the child following international guidelines with a special low-protein diet, specific medications and strict biochemical monitoring. Microbiota composition was assessed during the first month of life, and the presence of Bacteroides fragilis, known to be associated with propionate production, was effectively decreased by metronidazole treatment. After five antibiotic therapy cycles, at 4 months of age, the infant was supplemented with a daily mixture of three bifidobacterial strains, known not to be propionate producers. The supplementation increased the population of bifidobacteria, with Bifidobacterium breve as the dominating species; Ruminococcus gnavus, an acetate and formate producer, was also identified. Metabarcoding analysis, compared with low coverage whole metagenome sequencing, proved to capture all the microbial biodiversity and could be the elected tool for fast and cost-effective monitoring protocols to be implemented in the follow up of rare metabolic disorders such as PA. Data obtained could be a possible starting point to set up tailored microbiota modification treatment studies in the attempt to improve the quality of life of people affected by propionic acidemia.

Evaluation of Freezing Methods by Low Temperature X-Ray Diffraction

1977 ◽  
Vol 35 ◽  
pp. 330-333
Author(s):  
T. Gulik-Krzywicki ◽  
M.J. Costello
Keyword(s):  
Biological Materials ◽  
Molecular Organization ◽  
X Ray Diffraction ◽  
Glass Capillary ◽  
X Ray ◽  
Rate Dependent ◽  
Before And After ◽  
Freeze Etching ◽  
Diffraction Patterns ◽  
Set Up

Freeze-etching electron microscopy is currently one of the best methods for studying molecular organization of biological materials. Its application, however, is still limited by our imprecise knowledge about the perturbations of the original organization which may occur during quenching and fracturing of the samples and during the replication of fractured surfaces. Although it is well known that the preservation of the molecular organization of biological materials is critically dependent on the rate of freezing of the samples, little information is presently available concerning the nature and the extent of freezing-rate dependent perturbations of the original organizations. In order to obtain this information, we have developed a method based on the comparison of x-ray diffraction patterns of samples before and after freezing, prior to fracturing and replication.Our experimental set-up is shown in Fig. 1. The sample to be quenched is placed on its holder which is then mounted on a small metal holder (O) fixed on a glass capillary (p), whose position is controlled by a micromanipulator.

scholarly journals Gut Microbiome in a Russian Cohort of Pre- and Post-Cholecystectomy Female Patients

2021 ◽  
Vol 11 (4) ◽  
pp. 294
Author(s):  
Irina Grigor’eva ◽  
Tatiana Romanova ◽  
Natalia Naumova ◽  
Tatiana Alikina ◽  
Alexey Kuznetsov ◽  
...  
Keyword(s):  
Gut Microbiota ◽  
Relative Abundance ◽  
Gut Microbiome ◽  
Gallstone Disease ◽  
Illumina Miseq ◽  
Rrna Gene ◽  
Bacterial Phyla ◽  
Female Patients ◽  
Composition And Structure ◽  
Before And After

The last decade saw extensive studies of the human gut microbiome and its relationship to specific diseases, including gallstone disease (GSD). The information about the gut microbiome in GSD-afflicted Russian patients is scarce, despite the increasing GSD incidence worldwide. Although the gut microbiota was described in some GSD cohorts, little is known regarding the gut microbiome before and after cholecystectomy (CCE). By using Illumina MiSeq sequencing of 16S rRNA gene amplicons, we inventoried the fecal bacteriobiome composition and structure in GSD-afflicted females, seeking to reveal associations with age, BMI and some blood biochemistry. Overall, 11 bacterial phyla were identified, containing 916 operational taxonomic units (OTUs). The fecal bacteriobiome was dominated by Firmicutes (66% relative abundance), followed by Bacteroidetes (19%), Actinobacteria (8%) and Proteobacteria (4%) phyla. Most (97%) of the OTUs were minor or rare species with ≤1% relative abundance. Prevotella and Enterocossus were linked to blood bilirubin. Some taxa had differential pre- and post-CCE abundance, despite the very short time (1–3 days) elapsed after CCE. The detailed description of the bacteriobiome in pre-CCE female patients suggests bacterial foci for further research to elucidate the gut microbiota and GSD relationship and has potentially important biological and medical implications regarding gut bacteria involvement in the increased GSD incidence rate in females.

scholarly journals The Inverse Spacer—A Novel, Safe, and Cost-Effective Approach in Routine Procedures for Revision Knee Arthroplasty

2021 ◽  
Vol 10 (5) ◽  
pp. 971
Author(s):  
Kristoff Hammerich ◽  
Jens Pollack ◽  
Alexander F. Hasse ◽  
André El Saman ◽  
René Huber ◽  
...  
Keyword(s):  
Knee Arthroplasty ◽  
Clinical Success ◽  
Cost Effective ◽  
Revision Total Knee Arthroplasty ◽  
Rotational Stability ◽  
X Rays ◽  
Free Interval ◽  
Major Disadvantage ◽  
Cost Effective Approach ◽  
Before And After

Background: A major disadvantage of current spacers for two-stage revision total knee arthroplasty (R-TKA) is the risk of (sub-) luxation during mobilization in the prosthesis-free interval, limiting their clinical success with detrimental consequences for the patient. The present study introduces a novel inverse spacer, which prevents major complications, such as spacer (sub-) luxations and/or fractures of spacer or bone. Methods: The hand-made inverse spacer consisted of convex tibial and concave femoral components of polymethylmethacrylate bone cement and was intra-operatively molded under maximum longitudinal tension in 5° flexion and 5° valgus position. Both components were equipped with a stem for rotational stability. This spacer was implanted during an R-TKA in 110 knees with diagnosed or suspected periprosthetic infection. Postoperative therapy included a straight leg brace and physiotherapist-guided, crutch-supported mobilization with full sole contact. X-rays were taken before and after prosthesis removal and re-implantation. Results: None of the patients experienced (sub-) luxations/fractures of the spacer, periprosthetic fractures, or soft tissue compromise requiring reoperation. All patients were successfully re-implanted after a prosthesis-free interval of 8 weeks, except for three patients requiring an early exchange of the spacer due to persisting infection. In these cases, the prosthetic-free interval was prolonged for one week. Conclusion: The inverse spacer in conjunction with our routine procedure is a safe and cost-effective alternative to other articulating or static spacers, and allows crutch-supported sole contact mobilization without major post-operative complications. Maximum longitudinal intra-operative tension in 5° flexion and 5° valgus position appears crucial for the success of surgery.

scholarly journals 400 - Effects of Computerized Cognitive Training with an Elderly Community Sample

2020 ◽  
Vol 32 (S1) ◽  
pp. 116-116
Author(s):  
M Pires ◽  
A Antunes ◽  
C Gameiro ◽  
C Pombo
Keyword(s):  
Older Adults ◽  
Cognitive Training ◽  
New Technologies ◽  
Community Sample ◽  
Cost Effective ◽  
Well Being ◽  
Control Group ◽  
Depression Symptoms ◽  
Intensive Training ◽  
Before And After

Community-focused programs that promote active and healthy aging can help preserve cognitive capacities, prevent or reverse cognitive deficits. Computer-based cognitive training (CCT) is a promising non-pharmacological, cost -effective and accessible intervention to face the effects of age-related cognitive decline. Previous studies proved CCT to have equal or better efficacy compared to traditional interventions. This comparative multifactorial study aims to test the efficacy of a CCT in a non-randomized community sample of 74 older adults: G1-CCT Experimental group (n=43) (Mean age M=72.21, SD=12.65) and G2- Paper-Pencil Control group (n=31; M=77.94, SD=10.51). Pensioners (97.3%), mostly women (83.8 %) with basic education (51.4%) and without dementia diagnosis, completed a cognitive training program of 17 or 34 group sessions (twice a week). G2 undertook a classic cognitive paper-pencil stimuli tasks. G1, performed, additionally, individual CCT with COGWEB® in a multimodal format (intensive training of attention, calculation, memory, gnosis, praxis, executive functions). Both groups completed Portuguese versions of Mini -Mental State Examination (MMSE),Montreal Cognitive Assessment (MOCA); Geriatric Depressive Scale (GDS); Mini Dependence Assessment (MDA); WHOOQL 5 and Social Support Satisfaction Scale (ESSS) before and after participating in the program. Both groups reported better post-test scores on basic cognitive functions (MMSE, MOCA), Depression symptoms (GDS-30), subjective well-being and quality of life (WHOOQL-5). G1 presented higher MOCA and lower GDS scores before and after CCT, although, group differences become less expressive when interaction effects are considered. Results are in line with findings from past studies, CCT supported by the new technologies, is as a relevant cost-effective therapeutic tool for health professionals working with older adults. Particularly for preventive purposes of neuro-cognitive disorders.

scholarly journals Environmental Engineering Techniques to Restore Degraded Posidonia oceanica Meadows

Water ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 661
Author(s):  
Luigi Piazzi ◽  
Stefano Acunto ◽  
Francesca Frau ◽  
Fabrizio Atzori ◽  
Maria Francesca Cinti ◽  
...  
Keyword(s):  
Large Scale ◽  
Natural Habitat ◽  
Cost Benefit ◽  
Cost Effective ◽  
Posidonia Oceanica ◽  
Environmental Engineering ◽  
Bottom Surface ◽  
Sessile Invertebrates ◽  
Set Up ◽  
Short Time

Seagrass planting techniques have shown to be an effective tool for restoring degraded meadows and ecosystem function. In the Mediterranean Sea, most restoration efforts have been addressed to the endemic seagrass Posidonia oceanica, but cost-benefit analyses have shown unpromising results. This study aimed at evaluating the effectiveness of environmental engineering techniques generally employed in terrestrial systems to restore the P. oceanica meadows: two different restoration efforts were considered, either exploring non-degradable mats or, for the first time, degradable mats. Both of them provided encouraging results, as the loss of transplanting plots was null or very low and the survival of cuttings stabilized to about 50%. Data collected are to be considered positive as the survived cuttings are enough to allow the future spread of the patches. The utilized techniques provided a cost-effective restoration tool likely affordable for large-scale projects, as the methods allowed to set up a wide bottom surface to restore in a relatively short time without any particular expensive device. Moreover, the mats, comparing with other anchoring methods, enhanced the colonization of other organisms such as macroalgae and sessile invertebrates, contributing to generate a natural habitat.

Research on pull-type multi-AGV system dynamic path optimization based on time window

2021 ◽  
pp. 095440702098271
Author(s):  
Hongying Shan ◽  
Chuang Wang ◽  
Cungang Zou ◽  
Mengyao Qin
Keyword(s):  
Path Planning ◽  
Time Window ◽  
Planning Problem ◽  
Dijkstra Algorithm ◽  
Before And After ◽  
Common Planning ◽  
Planning Algorithm ◽  
Dynamic Path ◽  
Set Up ◽  
Path Planning Algorithm

This paper is a study of the dynamic path planning problem of the pull-type multiple Automated Guided Vehicle (multi-AGV) complex system. First, based on research status at home and abroad, the conflict types, common planning algorithms, and task scheduling methods of different AGV complex systems are compared and analyzed. After comparing the different algorithms, the Dijkstra algorithm was selected as the path planning algorithm. Secondly, a mathematical model is set up for the shortest path of the total driving path, and a general algorithm for multi-AGV collision-free path planning based on a time window is proposed. After a thorough study of the shortcomings of traditional single-car planning and conflict resolution algorithms, a time window improvement algorithm for the planning path and the solution of the path conflict covariance is established. Experiments on VC++ software showed that the improved algorithm reduces the time of path planning and improves the punctual delivery rate of tasks. Finally, the algorithm is applied to material distribution in the OSIS workshop of a C enterprise company. It can be determined that the method is feasible in the actual production and has a certain application value by the improvement of the data before and after the comparison.

scholarly journals Wear and Friction Characteristics of 65Mn Steel for Spike-Tooth Harrow

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 319
Author(s):  
Zhiguo Lu ◽  
Chuanyu Du ◽  
Qingcai Chen ◽  
Tianying Niu ◽  
Na Wang ◽  
...  
Keyword(s):  
Friction And Wear ◽  
Working Environment ◽  
Manganese Steel ◽  
Wear Loss ◽  
Variable Parameters ◽  
Wear Characteristics ◽  
Before And After ◽  
Set Up ◽  
Worn Surface ◽  
Friction And Wear Characteristics

The friction and wear characteristics of spike-tooth material (65Mn steel) of Spike-Tooth Harrow in a two-stage peanut harvester were studied in this paper. The friction and wear tests of pin and disc on 65 manganese steel were carried out on the tribometer, then the wear loss and the friction coefficient were studied. The wear loss of the pin was acquired by calculating the mass of the pin before and after the experiment using an electronic balance. According to the actual working environment of peanut spring-finger, four variable parameters are set up: load, speed, soil moisture and soil type. The friction and wear characteristics of pins were studied under different loads, speeds and different soil environments. After wearing, the worn surface of the material was observed by scanning microscope and the wear mechanism was studied. The experimental results show that the wear of the pin increases with the increase of load and decreases with the increase of rotational speed in the same rotation number. Especially in the case of the sandy soil with 20% in moisture, a maximum wear loss of the pin is achieved.

scholarly journals Innovative passive reinforcements for the gradual stabilization of a landslide according with the observational method

Landslides ◽  
2021 ◽  
Author(s):  
Lorenzo Brezzi ◽  
Alberto Bisson ◽  
Davide Pasa ◽  
Simonetta Cola
Keyword(s):  
Monitoring System ◽  
Low Cost ◽  
Economic Losses ◽  
Fe Model ◽  
Site Conditions ◽  
Observational Method ◽  
Rainy Period ◽  
Sustainable Solutions ◽  
Before And After ◽  
Set Up

AbstractA large number of landslides occur in North-Eastern Italy during every rainy period due to the particular hydrogeological conditions of this area. Even if there are no casualties, the economic losses are often significant, and municipalities frequently do not have sufficient financial resources to repair the damage and stabilize all the unstable slopes. In this regard, the research for more economically sustainable solutions is a crucial challenge. Floating composite anchors are an innovative and low-cost technique set up for slope stabilization: it consists in the use of passive sub-horizontal reinforcements, obtained by coupling a traditional self-drilling bar with some tendons cemented inside it. This work concerns the application of this technique according to the observational method described within the Italian and European technical codes and mainly recommended for the design of geotechnical works, especially when performed in highly uncertain site conditions. The observational method prescribes designing an intervention and, at the same time, using a monitoring system in order to correct and adapt the project during realization of the works on the basis of new data acquired while on site. The case study is the landslide of Cischele, a medium landslide which occurred in 2010 after an exceptional heavy rainy period. In 2015, some floating composite anchors were installed to slow down the movement, even if, due to a limited budget, they were not enough to ensure the complete stabilization of the slope. Thanks to a monitoring system installed in the meantime, it is now possible to have a comparison between the site conditions before and after the intervention. This allows the evaluation of benefits achieved with the reinforcements and, at the same time, the assessment of additional improvements. Two stabilization scenarios are studied through an FE model: the first includes the stabilization system built in 2015, while the second evaluates a new solution proposed to further increase the slope stability.

scholarly journals Established an eco-friendly cotton fabric treating process with enhancing anti-wrinkle performance

2021 ◽  
Vol 16 ◽  
pp. 155892502110034
Author(s):  
Xiongfang Luo ◽  
Pei Cheng ◽  
Wencong Wang ◽  
Jiajia Fu ◽  
Weidong Gao
Keyword(s):  
Tensile Strength ◽  
Citric Acid ◽  
Cotton Fabric ◽  
Crosslinking Agent ◽  
Cost Effective ◽  
Waterborne Polyurethane ◽  
Cotton Fabrics ◽  
Wrinkle Resistance ◽  
Before And After ◽  
Strength Retention

This study establishes an eco-friendly anti-wrinkle treating process for cotton fabric. Sodium hydroxide-liquid ammonia pretreatment followed by 6% (w/w) PU100 adding citric acid pad-cure-dry finishing. In this process, citric acid (CA) was used as the fundamental crosslinking agent during finishing because it is a non-formaldehyde based, cost-effective and well wrinkle resistance agent. Environmental-friendly waterborne polyurethane (WPU) was used as an additive to add to the CA finishing solution. Six commercial WPUs were systematically investigated. Fabric properties like wrinkle resistance, tensile strength retention, whiteness, durable press, softness, and wettability were well investigated. Fourier transform infrared spectra and X-ray diffraction spectra were also measured and discussed before and after adding waterborne polyurethane. Tentative mechanism of the interaction among the WPU, CA, and modified cotton fabrics is provided. The effect of cotton fabric pretreatment on fabric performance was also investigated. After the eco-process’s treatment, the fabric wrinkle resistant angle was upgraded to 271 ± 7°, tensile strength retention was maintained at 66.77% ± 3.50% and CIE whiteness was elevated to 52.13 ± 3.21, which are much better than the traditional CA anti-wrinkle finishing based on mercerized cotton fabrics. This study provides useful information for textile researchers and engineers.

Sign in / Sign up

Export Citation Format

Share Document