scholarly journals Adsorption of N,N,N′,N′-Tetraoctyl Diglycolamide on Hypercrosslinked Polysterene from a Supercritical Carbon Dioxide Medium

Molecules ◽  
2021 ◽  
Vol 27 (1) ◽  
pp. 31
Author(s):  
Mikhail Kostenko ◽  
Olga Parenago
Keyword(s):  
Carbon Dioxide ◽  
Organic Solvents ◽  
Chelating Agent ◽  
Wide Range ◽  
Speed Up ◽  
On Line ◽  
Impregnation Temperature ◽  
First Time ◽  
Toxic Organic Solvents ◽  
Fluid Parameters

The work considers for the first time the preparation of sorbents based on hypercrosslinked polysterene (HCP) and chelating agent N,N,N′,N′-tetraoctyldiglycolamide (TODGA) by impregnation in the supercritical (SC) CO2 medium. Such sorbents can be applied for further isolation and separation of lanthanides, actinides and other metals. They are usually prepared by impregnation in toxic organic solvents (e.g., methanol, dichloromethane). Our study shows that application of SC CO2 instead of organic solvents can significantly speed up the impregnation, perfom it in one stage and make the process more eco-friendly. At the same time, the obtained sorbents are close in their parameters to the classical ones. This article presents the results of measuring the TODGA adsorption isotherms on two HCP sorbents (MN202 and MN270) on a wide range of SC fluid parameters. Adsorption measurements were carried out using on-line supercritical fluid chromatography and gravimetry. Based on the sorption capacity parameter, MN202 sorbent was selected as the better carrier for TODGA. An impregnation temperature increase within the range 313–343 K in isochoric conditions (ρ = 0.780 g/mL) reduces the maximum of TODGA adsorption from ~0.68 mmol/g to ~0.49 mmol/g.

Wheel-Tooling Gap Measurement System for Conform™ Extrusion Machinery Based on a Capacitive Sensor

2005 ◽  
Vol 127 (2) ◽  
pp. 394-401 ◽  
Author(s):  
K. Khawaja ◽  
L. Seneviratne ◽  
K. Althoefer
Keyword(s):  
Measurement System ◽  
Capacitive Sensor ◽  
Extrusion Process ◽  
Monitoring And Control ◽  
Sensing System ◽  
Gap Measurement ◽  
Wide Range ◽  
On Line ◽  
And Control ◽  
First Time

Conform™ extrusion is a very versatile manufacturing process enabling the production of a wide range of extruded profiles. It is critical to maintain a precise predefined wheel-tooling gap for the efficient running of the Conform extrusion process and to maintain high product quality. However, this is a challenging task due to the hostile environment, high operating temperatures, and required accuracy. An accurate high-temperature gap measurement system for Conform extrusion machinery, using a capacitive sensing system, is developed in this study. The sensor is implemented in a copper Conform extrusion machine, and experimental results are presented, providing for the first time a detailed view of Conform Extrusion gap behavior during production. It is shown that the proposed gap-sensing and control system results in a number of advantages, including reduced machine setup times, reduced flash (waste) rates, and on-line monitoring and control of gap size. The research is carried out in collaboration with Holton Machinery Ltd., a leading manufacturer of Conform Extrusion machinery.

Reproductive Attitudes and Behaviour of Intelligentsia (Based on Sociological Survey in the Ivanovo Region)

2020 ◽  
pp. 81-95
Author(s):  
Evgeniy Smirnov ◽  
Yuriy Voronov
Keyword(s):  
Russian Federation ◽  
Focus Group Interviews ◽  
Demographic Challenges ◽  
Wide Range ◽  
Educational Capacity ◽  
On Line ◽  
The Russian Federation ◽  
Group Interviews ◽  
And Behavior ◽  
First Time

The article deals with present day demographic challenges in the depressed region of the Russian Federation, which has been demonstrating low birth rates for over 30 years. At the same time, the region has its social and cultural features, historical traditions, scientific and educational capacity which, taken together, to a large extend also determine the reproductive behavior of the population. Relying on the empirical data, the authors are attempting to explain this contradiction and to reveal the approaches, which will help to improve the situation. Methodology of complex sociological analysis, combination of quantitative and qualitative procedures helped to deeply study the grounds for and factors of reproductive preferences and behavior of the intelligentsia. For the first time such methods as survey and focus group interviews have been systematically implied to research the reproductive preferences and behavior; an on-line survey motivating childbirth is suggested. The results of the research prompted the necessity to create a separate field in addressing the reproductive issues; the field is closely connected to such medical factors as training specialists in men’s reproductive health. The Ministry of Healthcare of the Russian Federation has supported the ideas of Ivanovo medical intelligentsia. In the article the present day agenda is summarized, the trends of institutional support development for breakthrough national objectives in the sphere of demography are outlined. One of the challenges in the demography management is the necessity to constantly modify the processes depending on the current regulatory environment and, what is more important, on the level of participation of regional intelligentsia in national demographic objectives. The conclusion presents a wide range of ideas on improvement of programs, projects and practices of demographic policy.

Recent Progress and Plans in Computer-Controlled High Resolution Electron Microscopy

1990 ◽  
Vol 48 (1) ◽  
pp. 154-155
Author(s):  
W.J. de Ruijter ◽  
Peter Rez ◽  
David J. Smith
Keyword(s):  
Electron Microscopy ◽  
Digital Processing ◽  
High Resolution Electron Microscopy ◽  
Objective Lens ◽  
Linear Filter ◽  
Contrast Transfer Function ◽  
Image Displacement ◽  
Spatially Resolved ◽  
Wide Range ◽  
On Line

Digital computers are becoming widely recognized as standard accessories for electron microscopy. Due to instrumental innovations the emphasis in digital processing is shifting from off-line manipulation of electron micrographs to on-line image acquisition, analysis and microscope control. An on-line computer leads to better utilization of the instrument and, moreover, the flexibility of software control creates the possibility of a wide range of novel experiments, for example, based on temporal and spatially resolved acquisition of images or microdiffraction patterns. The instrumental resolution in electron microscopy is often restricted by a combination of specimen movement, radiation damage and improper microscope adjustment (where the settings of focus, objective lens stigmatism and especially beam alignment are most critical). We are investigating the possibility of proper microscope alignment based on computer induced tilt of the electron beam. Image details corresponding to specimen spacings larger than ∼20Å are produced mainly through amplitude contrast; an analysis based on geometric optics indicates that beam tilt causes a simple image displacement. Higher resolution detail is characterized by wave propagation through the optical system of the microscope and we find that beam tilt results in a dispersive image displacement, i.e. the displacement varies with spacing. This approach is valid for weak phase objects (such as amorphous thin films), where transfer is simply described by a linear filter (phase contrast transfer function) and for crystalline materials, where imaging is described in terms of dynamical scattering and non-linear imaging theory. In both cases beam tilt introduces image artefacts.

Safety assessment of biological raw materials in the system of medicines quality assurance

2020 ◽  
pp. 63-72
Author(s):  
Yu. Olefir ◽  
E. Sakanyan ◽  
I. Osipova ◽  
V. Dobrynin ◽  
M. Smirnova ◽  
...  
Keyword(s):  
Raw Materials ◽  
State Level ◽  
The State ◽  
Spongiform Encephalopathy ◽  
Safety Standards ◽  
Wide Range ◽  
The Russian Federation ◽  
Key Aspects ◽  
First Time ◽  
Medicines Quality

The entry of a wide range of biotechnological products into the pharmaceutical market calls for rein-forcement of the quality, efficacy and safety standards at the state level. The following general monographs have been elaborated for the first time to be included into the State Pharmacopoeia of the Russian Federation, XIV edition: "Viral safety" and "Reduction of the risk of transmitting animal spongiform encephalopathy via medicinal products". These general monographs were elaborated taking into account the requirements of foreign pharmacopoeias and the WHO recommendations. The present paper summarises the key aspects of the monographs.

Upgrading to nutrient removal by means of internal carbon from sludge hydrolysis

1994 ◽  
Vol 29 (12) ◽  
pp. 31-40 ◽  
Author(s):  
Pia Prohaska Brinch ◽  
Kim Rindel ◽  
Kathryn Kalb
Keyword(s):  
Reaction Rate ◽  
Wastewater Treatment Plants ◽  
Secondary Treatment ◽  
N Removal ◽  
Sludge Hydrolysis ◽  
Speed Up ◽  
On Line ◽  
Full Scale Tests ◽  
Biological Phosphorus ◽  
Hydrolysis Of

Due to the introduction of stricter nutrient effluent standards, many existing wastewater treatment plants performing only primary or secondary treatment are about to be upgraded. As the space available at the plants is, however, often limited, processes are required which will accommodate the need for increased treatment capacity without requiring much more space. In the hydrolysis of primary or pre-precipitated sludge direct-degradable organic carbon is produced which can speed up the reaction rate and increase both biological phosphorus and nitrogen removal. Full-scale tests with dosing of hydrolysate for biological P and N removal, respectively, have shown that this is a most viable process. The use of on-line monitoring has improved the process further.

Innovation in Byzantine Medicine

2020 ◽  
Author(s):  
Petros Bouras-Vallianatos
Keyword(s):  
Human Physiology ◽  
Medical Literature ◽  
Cultural Exchange ◽  
Significant Degree ◽  
Medieval Medicine ◽  
Medieval Latin ◽  
Main Thesis ◽  
Wide Range ◽  
Comprehensive Examination ◽  
First Time

Byzantine medicine is still a little-known and misrepresented field not only in the wider arena of debates on medieval medicine but also among Byzantinists. Byzantine medical literature is often viewed as ‘stagnant’ and mainly preserving ancient ideas; and our knowledge of it continues to be based to a great extent on the comments of earlier authorities, which are often repeated uncritically. This book presents the first comprehensive examination of the medical corpus of, arguably, the most important late Byzantine physician John Zacharias Aktouarios (c.1275–c.1330). The main thesis is that John’s medical works show an astonishing degree of openness to knowledge from outside Byzantium combined with a significant degree of originality, in particular, in the fields of uroscopy, pharmacology, and human physiology. The analysis of John’s edited (On Urines and On Psychic Pneuma) and unedited (Medical Epitome) works is supported for the first time by the consultation of a large number of manuscripts. The study is also informed by evidence from a wide range of medical sources, including previously unpublished ones, and texts from other genres, such as epistolography and merchants’ accounts. The contextualization of John’s works sheds new light on the development of Byzantine medical thought and practice, and enhances our understanding of the late Byzantine social and intellectual landscape. Finally, John’s medical observations are also examined in the light of examples from the medieval Latin and Islamic worlds, placing his medical theories in the wider Mediterranean milieu and highlighting the cultural exchange between Byzantium and its neighbours.

Rebels, Believers, Survivors

2020 ◽  
Author(s):  
Noel Malcolm
Keyword(s):  
Catholic Church ◽  
Religious Conversion ◽  
Late Nineteenth Century ◽  
Napoleonic Wars ◽  
Conversion To Islam ◽  
Wide Range ◽  
History Of ◽  
External Powers ◽  
First Time ◽  
Modern Myth

This book of essays covers a wide range of topics in the history of Albania and Kosovo. Many of the essays illuminate connections between the Albanian lands and external powers and interests, whether political, military, diplomatic or religious. Such topics include the Habsburg invasion of Kosovo in 1689, the manoeuvrings of Britain and France towards the Albanian lands during the Napoleonic Wars, the British interest in those lands in the late nineteenth century, and the Balkan War of 1912. On the religious side, essays examine ‘crypto-Christianity’ in Kosovo during the Ottoman period, the stories of conversion to Islam revealed by Inquisition records, the first theological treatise written in Albanian (1685), and the work of the ‘Apostolic Delegate’ who reformed the Catholic Church in early twentieth-century Albania. Some essays bring to life ordinary individuals hitherto unknown to history: women hauled before the Inquisition, for example, or the author of the first Albanian autobiography. The longest essay, on Ali Pasha, tells for the first time the full story of the role he played in the international politics of the Napoleonic Wars. Some of these studies have been printed before (several in hard-to-find publications, and one only in Albanian), but the greater part of this book appears here for the first time. This is not only a contribution to Albanian and Balkan history it also engages with many broader issues, including religious conversion, methods of enslavement within the Ottoman Empire, and the nature of modern myth-making about national identity.

Recycling and Reuse in the Roman Economy

2020 ◽  
Keyword(s):  
Building Materials ◽  
Computational Modelling ◽  
Late Antique ◽  
Roman Economy ◽  
Wide Range ◽  
The Status ◽  
Recent Developments ◽  
Methodological Approaches ◽  
First Time ◽  
Site Types

The recycling and reuse of materials and objects were extensive in the past, but have rarely been embedded into models of the economy; even more rarely has any attempt been made to assess the scale of these practices. Recent developments, including the use of large datasets, computational modelling, and high-resolution analytical chemistry, are increasingly offering the means to reconstruct recycling and reuse, and even to approach the thorny matter of quantification. Growing scholarly interest in the topic has also led to an increasing recognition of these practices from those employing more traditional methodological approaches, which are sometimes coupled with innovative archaeological theory. Thanks to these efforts, it has been possible for the first time in this volume to draw together archaeological case studies on the recycling and reuse of a wide range of materials, from papyri and textiles, to amphorae, metals and glass, building materials and statuary. Recycling and reuse occur at a range of site types, and often in contexts which cross-cut material categories, or move from one object category to another. The volume focuses principally on the Roman Imperial and late antique world, over a broad geographical span ranging from Britain to North Africa and the East Mediterranean. Last, but not least, the volume is unique in focusing upon these activities as a part of the status quo, and not just as a response to crisis.

scholarly journals A Virtual Telescope for the Open University Science Foundation Course

1998 ◽  
Vol 162 ◽  
pp. 100-105
Author(s):  
Andrew J. Norton ◽  
Mark H. Jones
Keyword(s):  
Social Science ◽  
Open University ◽  
Distance Teaching ◽  
The Arts ◽  
Wide Range ◽  
University Science ◽  
First Time ◽  
Degree Level ◽  
Selection Of

The Open University is the UK's foremost distance teaching university. For over twenty five years we have been presenting courses to students spanning a wide range of degree level and vocational subjects. Since we have no pre-requisites for entry, a major component of our course profile is a selection of foundation courses comprising one each in the Arts, Social Science, Mathematics, Technology and Science faculties. The Science Faculty's foundation course is currently undergoing a substantial revision. The new course, entitled “S103: Discovering Science”, will be presented to students for the first time in 1998.

scholarly journals Autophagy Deficiency by Atg4B Loss Leads to Metabolomic Alterations in Mice

Metabolites ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 481
Author(s):  
Gemma G. Martínez-García ◽  
Raúl F. Pérez ◽  
Álvaro F. Fernández ◽  
Sylvere Durand ◽  
Guido Kroemer ◽  
...  
Keyword(s):  
Skeletal Muscle ◽  
Amino Acids ◽  
Mammalian Cells ◽  
Tissue Homeostasis ◽  
In Vivo Studies ◽  
Protective Mechanism ◽  
Cardiac Damage ◽  
Wide Range ◽  
First Time

Autophagy is an essential protective mechanism that allows mammalian cells to cope with a variety of stressors and contributes to maintaining cellular and tissue homeostasis. Due to these crucial roles and also to the fact that autophagy malfunction has been described in a wide range of pathologies, an increasing number of in vivo studies involving animal models targeting autophagy genes have been developed. In mammals, total autophagy inactivation is lethal, and constitutive knockout models lacking effectors of this route are not viable, which has hindered so far the analysis of the consequences of a systemic autophagy decline. Here, we take advantage of atg4b−/− mice, an autophagy-deficient model with only partial disruption of the process, to assess the effects of systemic reduction of autophagy on the metabolome. We describe for the first time the metabolic footprint of systemic autophagy decline, showing that impaired autophagy results in highly tissue-dependent alterations that are more accentuated in the skeletal muscle and plasma. These changes, which include changes in the levels of amino-acids, lipids, or nucleosides, sometimes resemble those that are frequently described in conditions like aging, obesity, or cardiac damage. We also discuss different hypotheses on how impaired autophagy may affect the metabolism of several tissues in mammals.

Sign in / Sign up

Export Citation Format

Share Document