scholarly journals Multifunctional Plasmonic Grating Based on the Phase Modulation of Excitation Light

Nanomaterials ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 2941
Author(s):  
Sen Wang ◽  
Jing Zhang ◽  
Maixia Fu ◽  
Jingwen He ◽  
Xing Li
Keyword(s):  
Phase Modulation ◽  
High Efficiency ◽  
Bessel Beam ◽  
Excitation Light ◽  
Linear Gradient ◽  
Practical Applications ◽  
Plasmonic Grating ◽  
The Cost ◽  
Plasmon Polaritons ◽  
Gradient Phase

Multifunctional optical devices are desirable at all times due to their features of flexibility and high efficiency. Based on the principle that the phase of excitation light can be transferred to the generated surface plasmon polaritons (SPPs), a plasmonic grating with three functions is proposed and numerically demonstrated. The Cherenkov SPPs wake or nondiffracting SPPs Bessel beam or focusing SPPs field can be correspondingly excited for the excitation light, which is modulated by a linear gradient phase or a symmetrical phase or a spherical phase, respectively. Moreover, the features of these functions such as the propagation direction of SPPs wake, the size and direction of the SPPs Bessel beam, and the position of SPPs focus can be dynamically manipulated. In consideration of the fact that no extra fabrication is required to obtain the different SPPs fields, the proposed approach can effectively reduce the cost in practical applications.

scholarly journals A Synergy Approach to Enhance Upconversion Luminescence Emission of Rare Earth Nanophosphors with Million-Fold Enhancement Factor

Crystals ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1187
Author(s):  
Duc Tu Vu ◽  
Yi-Chang Tsai ◽  
Quoc Minh Le ◽  
Shiao-Wei Kuo ◽  
Ngoc Diep Lai ◽  
...  
Keyword(s):  
Cross Section ◽  
Absorption Cross Section ◽  
High Efficiency ◽  
Surface Defects ◽  
Organic Dyes ◽  
Upconversion Luminescence ◽  
High Energy ◽  
Absorption Cross ◽  
Excitation Light ◽  
Practical Applications

Lanthanide (Ln3+)–doped upconversion nanoparticles (UCNPs) offer an ennormous future for a broad range of biological applications over the conventional downconversion fluorescent probes such as organic dyes or quantum dots. Unfortunately, the efficiency of the anti−Stokes upconversion luminescence (UCL) process is typically much weaker than that of the Stokes downconversion emission. Albeit recent development in the synthesis of UCNPs, it is still a major challenge to produce a high−efficiency UCL, meeting the urgent need for practical applications of enhanced markers in biology. The poor quantum yield efficiency of UCL of UCNPs is mainly due to the fol-lowing reasons: (i) the low absorption coefficient of Ln3+ dopants, the specific Ln3+ used here being ytterbium (Yb3+), (ii) UCL quenching by high−energy oscillators due to surface defects, impurities, ligands, and solvent molecules, and (iii) the insufficient local excitation intensity in broad-field il-lumination to generate a highly efficient UCL. In order to tackle the problem of low absorption cross-section of Ln3+ ions, we first incorporate a new type of neodymium (Nd3+) sensitizer into UCNPs to promote their absorption cross-section at 793 nm. To minimize the UCL quenching induced by surface defects and surface ligands, the Nd3+-sensitized UCNPs are then coated with an inactive shell of NaYF4. Finally, the excitation light intensity in the vicinity of UCNPs can be greatly enhanced using a waveguide grating structure thanks to the guided mode resonance. Through the synergy of these three approaches, we show that the UCL intensity of UCNPs can be boosted by a million−fold compared with conventional Yb3+–doped UCNPs.

scholarly journals Chemical Modification of Combusted Coal Gangue for U(VI) Adsorption: Towards a Waste Control by Waste Strategy

2021 ◽  
Vol 13 (15) ◽  
pp. 8421
Author(s):  
Yuan Gao ◽  
Jiandong Huang ◽  
Meng Li ◽  
Zhongran Dai ◽  
Rongli Jiang ◽  
...  
Keyword(s):  
Structural Analysis ◽  
High Efficiency ◽  
Low Cost ◽  
Chemical Activation ◽  
Cost Effective ◽  
Coal Gangue ◽  
Order Kinetic ◽  
Practical Applications ◽  
Detailed Structural Analysis ◽  
Alkaline Conditions

Uranium mining waste causes serious radiation-related health and environmental problems. This has encouraged efforts toward U(VI) removal with low cost and high efficiency. Typical uranium adsorbents, such as polymers, geopolymers, zeolites, and MOFs, and their associated high costs limit their practical applications. In this regard, this work found that the natural combusted coal gangue (CCG) could be a potential precursor of cheap sorbents to eliminate U(VI). The removal efficiency was modulated by chemical activation under acid and alkaline conditions, obtaining HCG (CCG activated with HCl) and KCG (CCG activated with KOH), respectively. The detailed structural analysis uncovered that those natural mineral substances, including quartz and kaolinite, were the main components in CCG and HCG. One of the key findings was that kalsilite formed in KCG under a mild synthetic condition can conspicuous enhance the affinity towards U(VI). The best equilibrium adsorption capacity with KCG was observed to be 140 mg/g under pH 6 within 120 min, following a pseudo-second-order kinetic model. To understand the improved adsorption performance, an adsorption mechanism was proposed by evaluating the pH of uranyl solutions, adsorbent dosage, as well as contact time. Combining with the structural analysis, this revealed that the uranyl adsorption process was mainly governed by chemisorption. This study gave rise to a utilization approach for CCG to obtain cost-effective adsorbents and paved a novel way towards eliminating uranium by a waste control by waste strategy.

scholarly journals On-chip trans-dimensional plasmonic router

Nanophotonics ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 3357-3365 ◽  
Author(s):  
Shaohua Dong ◽  
Qing Zhang ◽  
Guangtao Cao ◽  
Jincheng Ni ◽  
Ting Shi ◽  
...  
Keyword(s):  
High Speed ◽  
High Efficiency ◽  
Incident Angle ◽  
Reciprocal Lattice ◽  
Plasmonic Waveguide ◽  
Optical Diffraction ◽  
Local Dynamic ◽  
Phase Gradient ◽  
On Chip ◽  
Plasmon Polaritons

AbstractPlasmons, as emerging optical diffraction-unlimited information carriers, promise the high-capacity, high-speed, and integrated photonic chips. The on-chip precise manipulations of plasmon in an arbitrary platform, whether two-dimensional (2D) or one-dimensional (1D), appears demanding but non-trivial. Here, we proposed a meta-wall, consisting of specifically designed meta-atoms, that allows the high-efficiency transformation of propagating plasmon polaritons from 2D platforms to 1D plasmonic waveguides, forming the trans-dimensional plasmonic routers. The mechanism to compensate the momentum transformation in the router can be traced via a local dynamic phase gradient of the meta-atom and reciprocal lattice vector. To demonstrate such a scheme, a directional router based on phase-gradient meta-wall is designed to couple 2D SPP to a 1D plasmonic waveguide, while a unidirectional router based on grating metawall is designed to route 2D SPP to the arbitrarily desired direction along the 1D plasmonic waveguide by changing the incident angle of 2D SPP. The on-chip routers of trans-dimensional SPP demonstrated here provide a flexible tool to manipulate propagation of surface plasmon polaritons (SPPs) and may pave the way for designing integrated plasmonic network and devices.

scholarly journals Sensuator: A Hybrid Sensor–Actuator Approach to Soft Robotic Proprioception Using Recurrent Neural Networks

Actuators ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 30
Author(s):  
Pornthep Preechayasomboon ◽  
Eric Rombokas
Keyword(s):  
Neural Networks ◽  
Recurrent Neural Networks ◽  
Linear Models ◽  
Open Loop ◽  
Proof Of Concept ◽  
State Estimator ◽  
Loop Control ◽  
Practical Applications ◽  
Soft Actuator ◽  
The Cost

Soft robotic actuators are now being used in practical applications; however, they are often limited to open-loop control that relies on the inherent compliance of the actuator. Achieving human-like manipulation and grasping with soft robotic actuators requires at least some form of sensing, which often comes at the cost of complex fabrication and purposefully built sensor structures. In this paper, we utilize the actuating fluid itself as a sensing medium to achieve high-fidelity proprioception in a soft actuator. As our sensors are somewhat unstructured, their readings are difficult to interpret using linear models. We therefore present a proof of concept of a method for deriving the pose of the soft actuator using recurrent neural networks. We present the experimental setup and our learned state estimator to show that our method is viable for achieving proprioception and is also robust to common sensor failures.

scholarly journals Optical spin-symmetry breaking for high-efficiency directional helicity-multiplexed metaholograms

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Muhammad Ashar Naveed ◽  
Muhammad Afnan Ansari ◽  
Inki Kim ◽  
Trevon Badloe ◽  
Joohoon Kim ◽  
...  
Keyword(s):  
High Efficiency ◽  
Spin Symmetry ◽  
Cost Effective ◽  
Dielectric Materials ◽  
Additional Degree ◽  
Cost Effective Alternative ◽  
Spin Orbit Interactions ◽  
Smart Mobile ◽  
The Cost ◽  
Hydrogenated Amorphous

AbstractHelicity-multiplexed metasurfaces based on symmetric spin–orbit interactions (SOIs) have practical limits because they cannot provide central-symmetric holographic imaging. Asymmetric SOIs can effectively address such limitations, with several exciting applications in various fields ranging from asymmetric data inscription in communications to dual side displays in smart mobile devices. Low-loss dielectric materials provide an excellent platform for realizing such exotic phenomena efficiently. In this paper, we demonstrate an asymmetric SOI-dependent transmission-type metasurface in the visible domain using hydrogenated amorphous silicon (a-Si:H) nanoresonators. The proposed design approach is equipped with an additional degree of freedom in designing bi-directional helicity-multiplexed metasurfaces by breaking the conventional limit imposed by the symmetric SOI in half employment of metasurfaces for one circular handedness. Two on-axis, distinct wavefronts are produced with high transmission efficiencies, demonstrating the concept of asymmetric wavefront generation in two antiparallel directions. Additionally, the CMOS compatibility of a-Si:H makes it a cost-effective alternative to gallium nitride (GaN) and titanium dioxide (TiO2) for visible light. The cost-effective fabrication and simplicity of the proposed design technique provide an excellent candidate for high-efficiency, multifunctional, and chip-integrated demonstration of various phenomena.

scholarly journals Ring-Forming Polymerization toward Perfluorocyclobutyl and Ortho-Diynylarene-Derived Materials: From Synthesis to Practical Applications

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1486
Author(s):  
Eugene B. Caldona ◽  
Ernesto I. Borrego ◽  
Ketki E. Shelar ◽  
Karl M. Mukeba ◽  
Dennis W. Smith
Keyword(s):  
Chemical Resistance ◽  
Structural Features ◽  
Review Article ◽  
Aryl Ether ◽  
Aromatic Rings ◽  
Practical Applications ◽  
Repeat Units ◽  
Wide Range ◽  
Synthetic Routes ◽  
The Cost

Many desirable characteristics of polymers arise from the method of polymerization and structural features of their repeat units, which typically are responsible for the polymer’s performance at the cost of processability. While linear alternatives are popular, polymers composed of cyclic repeat units across their backbones have generally been shown to exhibit higher optical transparency, lower water absorption, and higher glass transition temperatures. These specifically include polymers built with either substituted alicyclic structures or aromatic rings, or both. In this review article, we highlight two useful ring-forming polymer groups, perfluorocyclobutyl (PFCB) aryl ether polymers and ortho-diynylarene- (ODA) based thermosets, both demonstrating outstanding thermal stability, chemical resistance, mechanical integrity, and improved processability. Different synthetic routes (with emphasis on ring-forming polymerization) and properties for these polymers are discussed, followed by their relevant applications in a wide range of aspects.

scholarly journals “Perfect” Terahertz Vortex Beams Formed Using Diffractive Axicons and Prospects for Excitation of Vortex Surface Plasmon Polaritons

2021 ◽  
Vol 11 (2) ◽  
pp. 717
Author(s):  
Boris Knyazev ◽  
Valery Cherkassky ◽  
Oleg Kameshkov
Keyword(s):  
Surface Plasmon ◽  
Surface Plasmon Polaritons ◽  
Bessel Beam ◽  
Diffraction Theory ◽  
Terahertz Range ◽  
High Resistivity ◽  
Visible Range ◽  
Optical Elements ◽  
Scalar Diffraction ◽  
Plasmon Polaritons

Transformation of a Bessel beam by a lens results in the formation of a “perfect” vortex beam (PVB) in the focal plane of the lens. The PVB has a single-ring cross-section and carries an orbital angular momentum (OAM) equal to the OAM of the “parent” beam. PVBs have numerous applications based on the assumption of their ideal ring-type structure. For instance, we proposed using terahertz PVBs to excite vortex surface plasmon polaritons propagating along cylindrical conductors and the creation of plasmon multiplex communication lines in the future (Comput. Opt. 2019, 43, 992). Recently, we demonstrated the formation of PVBs in the terahertz range using a Bessel beam produced using a spiral binary silicon axicon (Phys. Rev. A 2017, 96, 023846). It was shown that, in that case, the PVB was not annular, but was split into nested spiral segments, which was obviously a consequence of the method of Bessel beam generation. The search for methods of producing perfect beams with characteristics approaching theoretically possible ones is a topical task. Since for the terahertz range, there are no devices like spatial modulators of light in the visible range, the main method for controlling the mode composition of beams is the use of diffractive optical elements. In this work, we investigated the characteristics of perfect beams, the parent beams being quasi-Bessel beams created by three types of diffractive phase axicons made of high-resistivity silicon: binary, kinoform, and “holographic”. The amplitude-phase distributions of the field in real perfect beams were calculated numerically in the approximation of the scalar diffraction theory. An analytical expression was obtained for the case of the binary axicon. It was shown that a distribution closest to an ideal vortex was obtained using a holographic axicon. The resulting distributions were compared with experimental and theoretical distributions of the evanescent field of a plasmon near the gold–zinc sulfide–air surface at different thicknesses of the dielectric layer, and recommendations for experiments were given.

scholarly journals Scattering Analysis and Efficiency Optimization of Dielectric Pancharatnam–Berry-Phase Metasurfaces

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 586
Author(s):  
Chen-Yi Yu ◽  
Qiu-Chun Zeng ◽  
Chih-Jen Yu ◽  
Chien-Yuan Han ◽  
Chih-Ming Wang
Keyword(s):  
Phase Modulation ◽  
Rotation Angle ◽  
Berry Phase ◽  
Fine Tuning ◽  
Design Rule ◽  
Polarization Conversion ◽  
Swarm Optimization ◽  
Efficiency Optimization ◽  
Phase Type ◽  
Gradient Phase

In this study, the phase modulation ability of a dielectric Pancharatnam–Berry (PB) phase metasurface, consisting of nanofins, is theoretically analyzed. It is generally considered that the optical thickness of the unit cell of a PB-phase metasurface is λ/2, i.e., a half-waveplate for polarization conversion. It is found that the λ/2 is not essential for achieving a full 2π modulation. Nevertheless, a λ/2 thickness is still needed for a high polarization conversion efficiency. Moreover, a gradient phase metasurface is designed. With the help of the particle swarm optimization (PSO) method, the wavefront errors of the gradient phase metasurface are reduced by fine-tuning the rotation angle of the nanofins. The diffraction efficiency of the gradient phase metasurface is thus improved from 73.4% to 87.3%. This design rule can be utilized to optimize the efficiency of phase-type meta-devices, such as meta-deflectors and metalenses.

scholarly journals Vacancy tuned thermoelectric properties and high spin filtering performance in graphene/silicene heterostructures

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Zainab Gholami ◽  
Farhad Khoeini
Keyword(s):  
Electric Fields ◽  
High Spin ◽  
High Efficiency ◽  
Practical Applications ◽  
External Electric Fields ◽  
Ferromagnetic Exchange ◽  
High Spin Polarization ◽  
Filtering Effect ◽  
Spin Switching ◽  
Spin Filtering

AbstractThe main contribution of this paper is to study the spin caloritronic effects in defected graphene/silicene nanoribbon (GSNR) junctions. Each step-like GSNR is subjected to the ferromagnetic exchange and local external electric fields, and their responses are determined using the nonequilibrium Green’s function (NEGF) approach. To further study the thermoelectric (TE) properties of the GSNRs, three defect arrangements of divacancies (DVs) are also considered for a larger system, and their responses are re-evaluated. The results demonstrate that the defected GSNRs with the DVs can provide an almost perfect thermal spin filtering effect (SFE), and spin switching. A negative differential thermoelectric resistance (NDTR) effect and high spin polarization efficiency (SPE) larger than 99.99% are obtained. The system with the DV defects can show a large spin-dependent Seebeck coefficient, equal to Ss ⁓ 1.2 mV/K, which is relatively large and acceptable. Appropriate thermal and electronic properties of the GSNRs can also be obtained by tuning up the DV orientation in the device region. Accordingly, the step-like GSNRs can be employed to produce high efficiency spin caloritronic devices with various features in practical applications.

scholarly journals Enhanced Thermoelectric Performance of n-Type Bi2Se3 Nanosheets through Sn Doping

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1827
Author(s):  
Mengyao Li ◽  
Yu Zhang ◽  
Ting Zhang ◽  
Yong Zuo ◽  
Ke Xiao ◽  
...  
Keyword(s):  
Figure Of Merit ◽  
Cost Effective ◽  
Low Grade ◽  
Hot Press ◽  
Processing Technologies ◽  
Sn Doping ◽  
Practical Applications ◽  
Alternative Materials ◽  
The Cost ◽  
Low Grade Heat

The cost-effective conversion of low-grade heat into electricity using thermoelectric devices requires developing alternative materials and material processing technologies able to reduce the currently high device manufacturing costs. In this direction, thermoelectric materials that do not rely on rare or toxic elements such as tellurium or lead need to be produced using high-throughput technologies not involving high temperatures and long processes. Bi2Se3 is an obvious possible Te-free alternative to Bi2Te3 for ambient temperature thermoelectric applications, but its performance is still low for practical applications, and additional efforts toward finding proper dopants are required. Here, we report a scalable method to produce Bi2Se3 nanosheets at low synthesis temperatures. We studied the influence of different dopants on the thermoelectric properties of this material. Among the elements tested, we demonstrated that Sn doping resulted in the best performance. Sn incorporation resulted in a significant improvement to the Bi2Se3 Seebeck coefficient and a reduction in the thermal conductivity in the direction of the hot-press axis, resulting in an overall 60% improvement in the thermoelectric figure of merit of Bi2Se3.

Sign in / Sign up

Export Citation Format

Share Document