scholarly journals Removal of Cadmium from Contaminated Water Using Coated Chicken Bones with Double-Layer Hydroxide (Mg/Fe-LDH)

Water ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 2303
Author(s):  
Saif S. Alquzweeni ◽  
Rasha S. Alkizwini
Keyword(s):  
Heavy Metals ◽  
Agitation Speed ◽  
Hydroxyl Groups ◽  
Order Kinetic ◽  
Hydrogen Binding ◽  
Aquatic Life ◽  
Surface Precipitation ◽  
Chicken Bone ◽  
Wide Range ◽  
Order Kinetic Model

Occurrence of heavy metals in freshwater sources is a grave concern due to their severe impacts on public health and aquatic life. Cadmium (Cd2+) is one of the most dangerous heavy metals, and can cause serious diseases even at low concentrations. Hence, a wide range of treatment technologies exist, such as nanofiltration and biological reactors. In this context, the present investigation aims at the development of a new adsorption medium, made from chicken bones coated with iron (Fe) and magnesium (Mg) hydroxides, to remove cadmium from water. This novel chicken bone functional substance was manufactured by applying layered double hydroxides (LDH) into the chicken bones. Initially, the new adsorption medium was characterized using Fourier-transform infrared spectroscopy (FTIR technology), then it was applied to remove cadmium from water under different conditions, including pH of water (3–7.5), agitation speed (50–200 rpm), adsorbent dose (1–20 g per 100 mL), and contact time (30–120 min). Additionally, the reaction kinetics were studied using a pseudo-first order kinetic model. The results obtained from the present study proved that the new adsorption medium removed 97% of cadmium after 120 min at an agitation speed of 150 rpm, pH of 5, and adsorption dose of 10 g per 100 mL. The results also showed that the new adsorption medium contains a significant number of functional groups, including hydroxyl groups. According to the outcomes of the kinetic study, the mechanism of removing metal is attributed to surface precipitation, ion exchange, complexation, hydrogen binding between pollutants, and the LDH-chicken bone substance.

scholarly journals Sawdust for the Removal of Heavy Metals from Water: A Review

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4318
Author(s):  
Elie Meez ◽  
Abbas Rahdar ◽  
George Z. Kyzas
Keyword(s):  
Heavy Metals ◽  
Adsorption Mechanism ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
Suitable Material ◽  
Removal Of Heavy Metals ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
And Control ◽  
Environmental Agencies

The threat of the accumulation of heavy metals in wastewater is increasing, due to their abilities to inflict damage to human health, especially in the past decade. The world’s environmental agencies are trying to issue several regulations that allow the management and control of random disposals of heavy metals. Scientific studies have heavily focused on finding suitable materials and techniques for the purification of wastewaters, but most solutions have been rejected due to cost-related issues. Several potential materials for this objective have been found and have been compared to determine the most suitable material for the purification process. Sawdust, among all the materials investigated, shows high potential and very promising results. Sawdust has been shown to have a good structure suitable for water purification processes. Parameters affecting the adsorption mechanism of heavy metals into sawdust have been studied and it has been shown that pH, contact time and several other parameters could play a major role in improving the adsorption process. The adsorption was found to follow the Langmuir or Freundlich isotherm and a pseudo second-order kinetic model, meaning that the type of adsorption was a chemisorption. Sawdust has major advantages to be considered and is one of the most promising materials to solve the wastewater problem.

scholarly journals Optimization of process parameters for heavy metals biosorption onto mustard waste biomass

2016 ◽  
Vol 14 (1) ◽  
pp. 175-187 ◽  
Author(s):  
Lăcrămioara (Negrilă) Nemeş ◽  
Laura Bulgariu
Keyword(s):  
Heavy Metals ◽  
Aqueous Media ◽  
Order Kinetic ◽  
Waste Biomass ◽  
Solution Ph ◽  
Biosorption Process ◽  
Optimization Of Process Parameters ◽  
Removal Of Heavy Metals ◽  
Equilibrium Data ◽  
Order Kinetic Model

AbstractMustard waste biomass was tested as a biosorbent for the removal of Pb(II), Zn(II) and Cd(II) from aqueous solution. This strategy may be a sustainable option for the utilization of such wastes. The influence of the most important operating parameters of the biosorption process was analyzed in batch experiments, and optimal conditions were found to include initial solution pH 5.5, 5.0 g biosorbent/L, 2 hours of contact time and high temperature. Kinetics analyses show that the maximum of biosorption was quickly reached and could be described by a pseudo-second order kinetic model. The equilibrium data were well fitted by the Langmuir model, and the highest values of maximum biosorption capacity were obtained with Pb(II), followed by Zn(II) and Cd(II). The thermodynamic parameters of the biosorption process (ΔG, ΔH and ΔS) were also evaluated from isotherms. The results of this study suggest that mustard waste biomass can be used for the removal of heavy metals from aqueous media.

Swelling and kinetic investigations of basic blue-3 sorption by polyacrylamide/Gum Arabic hybrid hydrogel in aqueous medium

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Uzma ◽  
Sultan Alam ◽  
Hanif Subhan ◽  
Luqman Ali Shah ◽  
Noor Saeed Khattak
Keyword(s):  
Thermo Gravimetric Analysis ◽  
Gum Arabic ◽  
Composite Hydrogel ◽  
Gravimetric Analysis ◽  
Order Kinetic ◽  
One Pot ◽  
Hybrid Hydrogel ◽  
Aquatic Life ◽  
Hybrid Sorbent ◽  
Order Kinetic Model

Abstract Removal of noxious dyes from waste water is highly desirable for the safety of humans, aquatic life and natural environment. The issue was addressed in the present work by one pot fabrication of polyacrylamide/Gum Arabic (pAAm/GA) composite hydrogel which was applied as sorbent for basic blue-3 (BB3) eradication. The synthesis of the material was confirmed by scanning electron microscopy (SEM), Fourier Transformed Infrared (FTIR) spectroscopy and thermo gravimetric analysis (TGA). Besides, the same techniques also evidenced BB3 uptake by the hydrogel. In distilled water, the swelling capacities of the hydrogel was investigated at pH 7 and the nature of water diffusion into the hydrogel was probed from the resultant data. The composite hydrogel reached equilibrium point in 24 h after which no appreciable water absorption occurred. The adsorption of BB3 by the hybrid material was comprehensively investigated which involved the effect of contact time, temperature and pH on the sorption capacity of the hybrid sorbent. The obtained data fitted well into pseudo second order kinetic model and the adsorption took place in three consecutive kinetic phases. Moreover, sorption thermodynamics revealed non spontaneous and endothermic nature of BB3 sorption accompanied with increase in degree of order.

scholarly journals Conversion of fisheries waste as magnetic hydroxyapatite bionanocomposite for the removal of heavy metals from groundwater

2017 ◽  
Vol 18 (4) ◽  
pp. 1406-1419
Author(s):  
F. Elmi ◽  
R. Chenarian Nakhaei ◽  
H. Alinezhad
Keyword(s):  
Heavy Metals ◽  
Freundlich Isotherm ◽  
Spectroscopic Techniques ◽  
Order Kinetic ◽  
Fish Scale ◽  
X Ray Diffraction ◽  
X Ray ◽  
Removal Of Heavy Metals ◽  
Order Kinetic Model ◽  
Ir Spectroscopic

Abstract This study is the first report of its type demonstrating the synthesis of mHAP on the basis of magnetic functionalization with nHAP, which were synthesized using Rutilus frisii kutum fish scale as a benign fishery waste by-product. The mHAP was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray diffraction (EDX), and Fourier transform infrared (FT-IR) spectroscopic techniques. The XRD pattern confirmed the formation of a single-phase nHAP without any extra steady phases. It was also found that the pseudo-second-order kinetic model gave a satisfactory fit to the experimental data (R2 = 0.99). The maximum removal percentages of Cu and Zn ions in optimal conditions (adsorbent dosage at 0.1 g, 30 min contact time at 25 ± 1 °C and pH = 5 ± 0.1) by mHAP were 97.1% and 93.8%, respectively. Results also demonstrated that mHAP could be recycled for up to five cycles in the case of copper and zinc. The Langmuir isotherm was proved to have a better correlation compared with that of the Freundlich isotherm. The thermodynamic parameters indicated that it was a spontaneously endothermic reaction. In conclusion, mHAP could be regarded as a powerful candidate for efficient biosorbent, capable of adsorbing heavy metals from aqueous solutions.

scholarly journals The preparation of calcium phosphate adsorbent from natural calcium resource and its application for copper ion removal

2020 ◽  
Vol 28 (2) ◽  
pp. 1725-1733
Author(s):  
Marta Kalbarczyk ◽  
Aleksandra Szcześ ◽  
Dariusz Sternik
Keyword(s):  
Electrostatic Interactions ◽  
Copper Ion ◽  
Environmentally Friendly ◽  
Material Surface ◽  
Hydroxyl Groups ◽  
Order Kinetic ◽  
Adsorption Model ◽  
Ion Removal ◽  
Developed Surface ◽  
Order Kinetic Model

AbstractUsing the hen eggshells (biowaste) as a source of calcium and an environmentally friendly approach, the nanopowder composed of 74% of hydroxyapatite (HA) and 26% of β–tricalcium phosphate (β-TCP) was obtained. Due to the maximum reduction of the stages associated with the use of chemicals and energy, this method can be considered as economically and environmentally friendly. A well-developed surface area and the negative zeta potential at pH above 3.5 indicate good adsorption properties of this material. The obtained material shows high adsorption capacity towards Cu2+ ions, i.e. 105.4 mg/g at pH 5. Good fit of the Langmuir adsorption model and the pseudo-second-order kinetic model may indicate chemical adsorption probably due to the electrostatic interactions between the Cu2+ cations and the negatively charged phosphate and hydroxyl groups on the material surface.

Gold Recovery from Aqueous Solutions Using Bioadsorbent Synthesized from Rambutan Peel

2012 ◽  
Vol 506 ◽  
pp. 405-408 ◽  
Author(s):  
T. Rubcumintara ◽  
A. Aksornpan ◽  
W. Jonglertjunya ◽  
W. Koo-Amornpattana ◽  
P. Tasaso
Keyword(s):  
Gold Recovery ◽  
Hydroxyl Groups ◽  
Loading Capacity ◽  
Order Kinetic ◽  
Gold Concentration ◽  
Solution Ph ◽  
Adsorbent Surface ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ft Ir

The recovery of gold from chloride solutions using bioadsorbent synthesized from waste rambutan peel was studied. The initial gold concentration 25-900 mg/L, solution pH 1-4, temperature 25-60 °C and the amount of adsorbent 1-25 mg were found to affect the efficiency for gold recovery as well as loading capacity. The 99.8 % gold recovery was accomplished in 1 h with loading capacity of 100 mg Au/g adsorbent at the following conditions: adsorbent 25 mg, initial gold concentration 100 mg/L, pH 2 and temperature 60 °C. The decrease of adsorbent from 25 to 1 mg resulted in the highest loading capacity of 2530 mg Au/g adsorbent and 100 % gold recovery within 100 h. The adsorption isotherm as well as mechanism were also elucidated. The Langmuir isotherm and the pseudo second-order kinetic model were fitted well with the experimental results. The activation energy of reaction was calculated to be 31.07 kJ/mol. The mechanism of adsorption is clarified to be the oxidation of hydroxyl groups and reduction of trivalent gold ions to metallic gold on the adsorbent surface which were supported by FT-IR, XRF and SEM.

Synthesis and application of a ternary composite of clay, saw-dust and peanut husks in heavy metal adsorption

2017 ◽  
Vol 75 (10) ◽  
pp. 2443-2453 ◽  
Author(s):  
Henry H. Mungondori ◽  
Sandile Mtetwa ◽  
Lilian Tichagwa ◽  
David M. Katwire ◽  
Pardon Nyamukamba
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Adsorption Capacity ◽  
Cost Effective ◽  
Order Kinetic ◽  
Ternary Composite ◽  
Adsorption Mechanisms ◽  
Saw Dust ◽  
Order Kinetic Model ◽  
Enhanced Adsorption

The adsorption of a multi-component system of ferrous, chromium, copper, nickel and lead on single, binary and ternary composites was studied. The aim of the study was to investigate whether a ternary composite of clay, peanut husks (PH) and saw-dust (SD) exhibited a higher adsorption capacity than that of a binary system of clay and SD as well as a single component adsorbent of PH alone. The materials were used in their raw state without any chemical modifications. This was done to retain the cost effective aspect of the naturally occurring adsorbents. The adsorption capacities of the ternary composite for the heavy metals Fe2+, Cr3+, Cu2+, Ni2+ and Pb2+ were 41.7 mg/g, 40.0 mg/g, 25.5 mg/g, 41.5 mg/g and 39.0 mg/g, respectively. It was found that the ternary composite exhibited excellent and enhanced adsorption capacity compared with both a binary and single adsorbent for the heavy metals Fe2+, Ni2+ and Cr3+. Characterization of the ternary composites was done using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). Kinetic models and adsorption isotherms were also studied. The pseudo second order kinetic model and the Langmuir adsorption isotherm best described the adsorption mechanisms for the ternary composite towards each of the heavy metal ions.

Characteristics and kinetics of hexavalent chromium reduction by gallic acid in aqueous solutions

2015 ◽  
Vol 71 (11) ◽  
pp. 1694-1700 ◽  
Author(s):  
ZiFang Chen ◽  
YongSheng Zhao ◽  
Qin Li
Keyword(s):  
Kinetic Model ◽  
Gallic Acid ◽  
Hexavalent Chromium ◽  
Ph Value ◽  
Order Kinetic ◽  
First Order ◽  
Molar Ratios ◽  
Wide Range ◽  
Order Kinetic Model ◽  
Pseudo First Order

Gallic acid (GA) is a naturally occurring plant polyphenol compound. Experiments were conducted to study the kinetics and effects of pH, temperature, irradiation, and initial hexavalent chromium (Cr(VI)) concentration on Cr(VI) reduction by GA. Results indicated that Cr(VI) could be reduced to chromium oxide (Cr(III)) with GA in a wide range of pH values from 2.0 to 8.5. The reaction followed a pseudo-first-order kinetic model with respect to Cr(VI) and GA in acid conditions (pH 2.0–5.0). However, the reaction did not follow the pseudo-first-order kinetic model at pH 6.5 and 8.5. Removal efficiencies and reaction rate constants of Cr(VI) significantly increased with decreasing pH value and increasing temperature. The effect of irradiation on Cr(VI) reduction increased with increasing pH, and irradiation improved the removal efficiency of Cr(VI) by 11.29% at pH 6.5. At pH 2.0, nearly all molar ratios of GA required for the reduction of Cr(VI) were 1:2 (±0.1) under different initial Cr(VI) concentrations; however, the molar ratios of GA required for the reduction of Cr(VI) were 1:1.29, 1:1.43, and 1:1.69, respectively, when the initial Cr(VI) concentrations were 10, 25, and 50 mg/L at pH 5.5.

scholarly journals Sorption of Cu, Zn, Pb and Cd from a Contaminated Aqueous Solution Using Starfish (Asterina pectinifera) Derived Biochar

2021 ◽  
Vol 43 (4) ◽  
pp. 274-285
Author(s):  
Ha Rin Jang ◽  
Han Gyeol Jeon ◽  
Deok Hyun Moon
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Heavy Metal Contamination ◽  
Harmful Effect ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Ir Analysis ◽  
Asterina Pectinifera

Objectives : Heavy metal contamination and accumulation have a harmful effect on the health of humans and animals and are serious problems worldwide. Currently, various technologies have been used for the treatment of contaminated wastewater, of which adsorption is the most commonly known and economically feasible technology. Many researchers are making attempts to find an effective and easily available adsorbent in terms of cost. In this study, starfish (<i>Asterina pectinifera</i>, SF) derived biochar was prepared and its characteristics were evaluated through various device analyses. After the biochar evaluation, the adsorption capacity was evaluated by conducting batch experiments.Methods : Biochar (Pyrolyzed Starfish at 500℃, PSF500) was produced by pyrolysis at 500℃ for 2 h in anaerobic conditions. Moreover, the characteristics of the surface were evaluated through SEM, TGA, XRD, elemental analysis and FT-IR analysis. In addition, batch experiments using heavy metal contaminated wastewater were conducted.Result and Discussion : In PSF500, CaCO3, Ca(OH)2 and CaCO3 were identified as the main phases by XRD analyses and various functional groups and pores that affect adsorption were observed on the surface of the sample. The batch experiment confirmed that the maximum adsorption was 153.8, 270.3, 434.8, and 147.1 mg/g for Cu, Zn, Pb and Cd, respectively. Also, it was confirmed that all heavy metals fit the similar Pseudo-second-order kinetic model and Langmuir model, which are the most suitable models for analyses of inorganic pollutants. After the sorption experiment, XRD and SEM analyses were conducted using the residue of PSF500, and in each sample CuO, Zn5(CO3)2(OH)6, Pb3(OH)2(CO3)2, Cd(OH)2 and CdCO3 were confirmed to be deposited on the surface of the sample.Conclusions : It was confirmed that PSF500 follows the complex mechanism of adsorption and precipitation with respect to heavy metals. Based on the experimental results, PSF500 could be used as an eco-friendly sorbent with CaCO3 as its main ingredient.

scholarly journals Sorption of Cd2+ and Pb2+ on Aragonite Synthesized from Eggshell

2020 ◽  
Vol 12 (3) ◽  
pp. 1174 ◽  
Author(s):  
Lulit Habte ◽  
Natnael Shiferaw ◽  
Mohd Danish Khan ◽  
Thenepalli Thriveni ◽  
Ji Whan Ahn
Keyword(s):  
Experimental Data ◽  
Synthetic Wastewater ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Solution Ph ◽  
Surface Precipitation ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
High Sorption ◽  
Pseudo Second Order

In the present work, waste eggshells were used as a precursor for the synthesis of aragonite crystals through the wet carbonation method. Cadmium (Cd2+) and lead (Pb2+) were removed by the synthesized aragonite from synthetic wastewater. The influence of initial solution pH, contact time, Cd2+ and Pb2+ concentration, and sorbent dosage were evaluated. The major sorption was observed in the first 100 mins and 360 mins for Pb2+and Cd2+ respectively reaching sorption equilibrium at 720 mins (12 hr). The sorption capacity toward Pb2+ was much higher than toward Cd2+. Both heavy metals displayed high sorption capacities at initial pH 6. The pseudo-second-order kinetic model fits well with the experimental data with a higher correlation coefficient R2. Two isotherm models were also evaluated for the best fit with the experimental data obtained. Langmuir isotherm best fits the sorption of the metals on aragonite synthesized from eggshells. X-ray diffraction (XRD) and Scanning electron microscopy (SEM) results of sorbent after sorption showed that the mechanism of sorption was dominated by surface precipitation. Therefore, aragonite crystals synthesized from waste eggshells can be a potential substitute source for the removal of Cd2+ and Pb2+ from contaminated water.

Sign in / Sign up

Export Citation Format

Share Document