The basis of quality of sheep pelts and fur products is morphological features of the skin of sheep

2020 ◽  
pp. 50-57
Author(s):  
I. Dmitrik ◽  
G. Zavgorodnyaya
Keyword(s):  
Mechanical Strength ◽  
Breaking Load ◽  
Hair Follicles ◽  
Morphological Features ◽  
High Density ◽  
Fat Cells ◽  
High Quality ◽  
Histological Features ◽  
Weakened Zone

The morphological and histological features of the skin and wool cover of sheep as the basis for the quality of fur sheep pelts have been studied. The most important properties of sheep pelts (uniformity, thinness and density of wool) are provide the possibility of producing high-quality fur semi-finished products from them. However, the features of the histostructure of fine-wool sheep determine the low mechanical strength of the “facial” layer of skin. As a result, the “front” layer during processing often cracks to the upper border of the reticular layer or even peels off from the latter, making the sheep pelt unsuitable for use on fur products. These defects in fur practice are called “cracking” and “peeling” of the facial layer. They are mainly peculiar to sheep pelts of fine-wooled sheep. In these animals due to the high density and tone of the coat, the roots and hair follicles, root vaginas, secretory departments, excretory ducts of the glands and other structures occupy a significant share of the volume in the thickness of the Pilar layer (up to 25–30 %). The share of fibrous structures remains less volume, and these structures themselves are relatively weakly developed, located loosely and loosely intertwined with each other. The accumulations of fat cells that occur here also cannot be attributed to skin-strengthening elements. In fine-fleece sheep the pilar layer is on average 60 % of the thickness of the dermis. Therefore, more than half of its thickness is a weakened zone. The strength of the “front” layer is not the same in different fine-wool breeds of sheep and in different animals within the breed. For example, the average breaking load for cod of the “front” layer in Soviet Merino pelts is 1,25 kg, and in Precoce is 2,49 kg.

scholarly journals MICROWAVE INSTALLATIONS WITH NON-TRADITIONAL RESONATORS FOR COLLECTING FUR FROM RABBITS’ SKIN

2018 ◽  
Vol 13 (2) ◽  
pp. 144-150
Author(s):  
Евгений Шамин ◽  
Evgeniy Shamin ◽  
Галина Новикова ◽  
Galina Novikova ◽  
Ольга Михайлова ◽  
...  
Keyword(s):  
Technological Process ◽  
High Frequency ◽  
Hair Follicles ◽  
Maximum Diameter ◽  
Internal Cavity ◽  
Dielectric Heating ◽  
Microwave Technology ◽  
High Quality ◽  
High Electric Field Strength

The paper describes the developed ultrahigh-frequency installations with toroidal and conical resonators used for separating rabbits’ fur from hides providing high electric field strength, continuity of the technological process while observing radio-tightness and improving the quality of fluff by improving microwave technology and ultra-high-frequency installations. The technological process of collecting hair from rabbits’ skins in a microwave device with toroidal resonators is due to the weakening of the retention of the hair cover in hair follicles during the selective dielectric heating of the components of the skin and the spraying of the brine. In a biconical resonator, it is possible to obtain the highest possible high quality factor due to small longitudinal currents in the walls. The presence of gaps in the outermost regions provides the ability to move the skin through the internal cavity of the biconical resonator, where the emitters are located in the region of its maximum diameter.

scholarly journals The Effect of HDPE Plastic Fibres on Concrete Performance

2020 ◽  
Author(s):  
Tamrin Rahman ◽  
Juli Nurdiana
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
High Temperatures ◽  
Plastic Waste ◽  
High Density ◽  
Concrete Mixture ◽  
High Quality ◽  
Cross Sectional ◽  
Sectional Shape

HDPE (high-density polyethene) plastic waste is stronger, harder, and more resistant to high temperatures than other plastics. Using it as an additive in a concrete mixture is one solution to reduce this type of waste. We examined how HDPE-type plastics can be used as an additive material in the manufacture of concrete to improve its hardness, tensile strength and compressive strength. Using 156 samples, we aimed to identify the effect of HDPE plastic fibres on concrete of three qualities; B0, f'c10 MPa (low quality), and f'c25 MPa (medium and high quality). We added four compositions (2.5%, 5%, 10% and 20% by weight of cement) of HDPE plastic fibre to each quality of cement, with HDPE plastic fibre sizes of 1 x 1 cm, 0.5 x 2 cm or 0.25 x 4 cm. We found that the addition of 5% HDPE plastic fibre with a 0.5 x 2 cm cross-sectional shape to the f'c10 MPa concrete gives the best result, with increased tensile and compressive strength of the concrete.

Quantitative defect studies in semiconductor TEM samples prepared by low angle ion milling

1995 ◽  
Vol 53 ◽  
pp. 512-513
Author(s):  
L. Mulestagno ◽  
J.C. Holzer ◽  
P. Fraundorf
Keyword(s):  
Sample Preparation ◽  
Milling Time ◽  
High Density ◽  
Low Density ◽  
Ion Milling ◽  
High Quality ◽  
Variable Angle ◽  
Major Disadvantage ◽  
Induced Defects

Due to the wealth of information, both analytical and structural that can be obtained from it TEM always has been a favorite tool for the analysis of process-induced defects in semiconductor wafers. The only major disadvantage has always been, that the volume under study in the TEM is relatively small, making it difficult to locate low density defects, and sample preparation is a somewhat lengthy procedure. This problem has been somewhat alleviated by the availability of efficient low angle milling.Using a PIPS® variable angle ion -mill, manufactured by Gatan, we have been consistently obtaining planar specimens with a high quality thin area in excess of 5 × 104 μm2 in about half an hour (milling time), which has made it possible to locate defects at lower densities, or, for defects of relatively high density, obtain information which is statistically more significant (table 1).

Influence of technology parameters of free-cutting steel continuous casting on the billet internal structure

2020 ◽  
Vol 76 (2) ◽  
pp. 139-142
Author(s):  
A. T. Kunakbaeva ◽  
A. M. Stolyarov ◽  
M. V. Potapova
Keyword(s):  
Regression Analysis ◽  
Continuous Casting ◽  
Internal Structure ◽  
Sulfur Content ◽  
Manganese Content ◽  
High Quality ◽  
Correlation And Regression Analysis ◽  
Cutting Steel ◽  
Continuously Cast

Free-cutting steel gains specific working properties thanks to the high content of sulfur and phosphorus. These elements, especially sulfur, have a rather high tendency to segregation. Therefore, segregation defects in free-cutting steel continuously cast billets can be significantly developed. The aim of the work was to study the influence of the chemical composition of freecutting steel and casting technological parameters on the quality of the macrostructure of continuously cast billets. A metallographic assessment of the internal structure of cast metal made of free-cutting steel and data processing by application of correlation and regression analysis were the research methods. The array of production data of 43 heats of free-cutting steel of grade A12 was studied. Steel casting on a five-strand radial type continuous casting machine was carried out by various methods of metal pouring from tundish into the molds. Metal of 19 heats was poured with an open stream, and 24 heats – by a closed stream through submerged nozzles with a vertical hole. High-quality billets had a cross-sectional size of 150×150 mm. The macrostructure of high-quality square billets made of free-cutting steel of A12 grade is characterized by the presence of central porosity, axial segregation and peripheral point contamination, the degree of development of which was in the range from 1.5 to 2.0 points, segregation cracks and strips – about 1.0 points. In the course of casting with an open stream, almost all of these defects are more developed comparing with the casting by a closed stream. As a result of correlation and regression analysis, linear dependences of the development degree of segregation cracks and strips both axial and angular on the sulfur content in steel and on the ratio of manganese content to sulfur content were established. The degree of these defects development increases with growing of sulfur content in steel of A12 grade. These defects had especially strong development when sulfur content in steel was of more than 0.10%. To improve the quality of cast metal, it is necessary to have the ratio of the manganese content to the sulfur content in the metal more than eight.

Experience of clinical testing of personal telemedicine system ‘Obereg’ for remote monitoring of patients in intensive care units

2020 ◽  
pp. 52-58 ◽  
Author(s):  
A. A. Eryomenko ◽  
N. V. Rostunova ◽  
S. A. Budagyan ◽  
V. V. Stets
Keyword(s):  
Intensive Care ◽  
Intensive Care Units ◽  
Remote Monitoring ◽  
Clinical Testing ◽  
Transportation Of Patients ◽  
High Quality ◽  
Telemedicine System ◽  
Accuracy Of Measurements ◽  
Hospital Equipment

The experience of clinical testing of the personal telemedicine system ‘Obereg’ for remote monitoring of patients at the intensive care units of leading Russian clinics is described. The high quality of communication with the remote receiving devices of doctors, the accuracy of measurements, resistance to interference from various hospital equipment and the absence of its own impact on such equipment were confirmed. There are significant advantages compared to stationary patient monitors, in particular, for intra and out-of-hospital transportation of patients.

METHODOLOGICAL ASPECTS OF VISUALIZATION OF CORONARY ARTERIES WITH TRANSTHORACIC ECHOCARDIOGRAPHY

2018 ◽  
pp. 26-35
Author(s):  
Z. A. Agaeva ◽  
K. B. Baghdasaryan
Keyword(s):  
Blood Flow ◽  
Coronary Blood Flow ◽  
Coronary Arteries ◽  
Transthoracic Echocardiography ◽  
Second Harmonic ◽  
Anatomic Reconstruction ◽  
High Quality ◽  
Acoustic Window ◽  
Methodological Aspects

The transthoracic echocardiography made by multifrequency probes with support of the mode of the second harmonic imaging, is a competitive method for visualization of the main coronary arteries and allows to estimate coronary blood flow with high quality. Of course, the method has considerable restrictions, most important of which is the low spatial resolution of a method, due to small acoustic window. Because of this the transthoracic visualization of coronary arteries perhaps will not become the leading method of anatomic reconstruction of separately taken coronary artery and especially all coronary arteries system. However uniqueness and indisputable advantage of this method is an opportunity to noninvasively estimate a coronary blood flow both once, and in dynamics.

Estimates on poverty in Russia and the additional measures to reduce it at the regional level

2020 ◽  
Vol 18 (4) ◽  
pp. 739-752 ◽  
Author(s):  
R.M. Sadykov
Keyword(s):  
Poverty Rate ◽  
Regional Level ◽  
Living Standards ◽  
Standard Of Living ◽  
High Quality ◽  
Social Standard ◽  
Republic Of Bashkortostan ◽  
The Republic ◽  
Sociological Studies

Subject. This article deals with the issues of social justice and a high quality of life, creating favorable economic and social conditions. Objectives. The article aims to assess the rate and changes in poverty in Russia and the Republic of Bashkortostan and develop complementary measures to reduce it. Methods. For the study, I used the methods of logical, comparative, economic and statistical analyses, the results of sociological studies, and official statistics. Results. The article highlights additional measures to reduce poverty in the region, including the establishment of a minimum social standard of living in each particular region that determines the poverty rate. Conclusions. Various factors, such as economic sanctions, economic slowdowns, territorial and regional imbalances, lead to living standards decline and poverty rise.

SCIENTIFIC BASIS OF POSTGRADUATE TRAINING FOR OFFICER WORKING ETHNIC AFFAIRS USING STATE BUDGET IN THE PERIOD OF 2018 – 2025

2017 ◽  
Author(s):  
La Duc Minh ◽  
Nguyen Thi Hao ◽  
Vu Thi Thuy
Keyword(s):  
Economic Development ◽  
Ethnic Groups ◽  
Human Resource ◽  
Postgraduate Training ◽  
Scientific Basis ◽  
National Defense ◽  
High Quality ◽  
State Budget ◽  
International Integration

Ethnic affairs play an important role in socio of ethnic groups’ solidarity, assurance of security and national defense stability. In -economic development, maintenanceorder to improve the quality of ethnic affairs, it is practical to carry out postgraduate training of officer implementing ethnic affairs using state budget with the aim of encouraging and enhancing officer quality to satisfy high-quality human resource in international integration.

Удобрение перца сладкого

2018 ◽  
Author(s):  
V.A. Borisov ◽  
A.M. Menshikh ◽  
V.S. Sosnov ◽  
G.F. Monakhos
Keyword(s):  
Drip Irrigation ◽  
Sweet Pepper ◽  
Water Soluble ◽  
Mineral Fertilizers ◽  
High Quality ◽  
Organic Mineral ◽  
Soluble Fertilizer

Показано действие минеральных удобрений, микрокристаллического комплексного водорастворимого удобрения «Мастер» и органоминерального наноудобрения с ростостимулирующей активностью «Арксойл» при капельном орошении на урожайность и качество сладкого перца нового гибрида F1 Темп. Сочетание основного удобрения с листовой и корневой подкормками позволяет получить до 65 т/га плодов перца высокого качества.The action of mineral fertilizers, microcrystalline complex water soluble fertilizer Master and organic mineral nano-fertilizer with growth-stimulating activity Arksoil under drip irrigation on the productivity and quality of sweet pepper of the new hybrid F1 Temp is shown. The combination of basic fertilizer with leaf and root fertilizing allows to obtain up to 65 t/ha of pepper fruits of high quality.

Child Diagnosis of Autism - How It Can Change the Family Life

2017 ◽  
Vol 5 (1) ◽  
pp. 498
Author(s):  
Maria Stănescu
Keyword(s):  
Early Intervention ◽  
Family Life ◽  
Social Life ◽  
Decisive Role ◽  
Autistic Children ◽  
Child Behaviors ◽  
High Quality ◽  
Child Diagnosis ◽  
The Family

The article is about the role of the family in the education and formation of children and, especially, in the life and development of autistic children. It describes the problems their family is facing and the need for counseling to parents with autistic children. The reaction to finding the diagnosis of autism varies from one family to another and may encounter a large variety: from disbelief, anger, guilt, helplessness, devastation, surprise, or even rejection of the child, to understanding and relief when finally the parents have an explanation for their child behaviors. Early intervention is important in psychological sustaining of the parent, as parent involvement in the recovery of the child with autism has a determinant role in his development and in ensuring a high quality of life of the child and the life of the hole family. The response to a child's autism diagnosis varies from one family to another. The family goes through a variety of disbelief, anger, guilt, helplessness, devastation, surprise, or even rejection of the child, to understanding and relief. Early intervention is very important in the psychological support of the parent. Because any change disturbs the family equilibrium. A diagnosis of autism changes not only the life of the diagnosed child, but also the life of family members. All the resources are focused on the need of the child. Although each parent is different, after diagnosing the child with autism, all parents are overwhelmed by confusion, shock and denial. Parents' feelings can be influenced by how their children's situation affects different aspects of life - it has an impact on service, on social life and all their personal life. If we look at the family as a system and when a disturbing factor appears, all parts of the system are affected. The involvement of parents in the recovery of the child with autism has a decisive role in its development and in ensuring a high quality of child's life and family life.

Sign in / Sign up

Export Citation Format

Share Document