scholarly journals CERAMIC BRICK FROM YAKUTIA RAW MATERIALS WITH THE ADDITION OF GROUND CULLET

2019 ◽  
Vol 4 (4) ◽  
pp. 103-109
Author(s):  
Ю. Трепалина ◽  
Yu. Trepalina ◽  
Н. Кириллова ◽  
N. Kirillova
Keyword(s):  
Building Material ◽  
Raw Materials ◽  
Residential Buildings ◽  
Physicomechanical Properties ◽  
Raw Material ◽  
Material Base ◽  
Ceramic Brick ◽  
Quality Product ◽  
The Republic ◽  
Mineralogical Compositions

For centuries, ceramic brick is the main building material in the construction of low-rise residential buildings and utility rooms. In addition, durability, high artistic features and the absence of toxicity characterize building ceramics. The volumes of construction in the Republic of Sakha (Yakutia) and the demand for bricks are increasing every year. Ceramic brick imported from outside the republic is used in the construction of facilities in Yakutsk. The Republic of Sakha possesses a good raw material base of clay and loam for the production of ceramic products. The study of basic properties of clay raw materials for obtaining a quality product is of particular importance. The results of studies on the use of raw materials from the Sannikovskoye clay deposit located in the Republic of Sakha (Yakutia) for the further production of ceramic bricks are presented. The chemical and mineralogical compositions of the clay raw materials are determined. Compositions of ceramic masses with the addition of waste cullet in different percentages are designed to reduce the amount of solid waste. The cullet used is tare and transparent. The technological and basic physicomechanical properties of the obtained samples are investigated.

scholarly journals PERSPECTIVES FOR DEVELOPMENT OF TECHNICAL BUILDING STONE- LIMESTONE IN THE REPUBLIC SRPSKA

2015 ◽  
Vol 1 (12) ◽  
Author(s):  
Slobodan Majstorović ◽  
Vladimir Malbašić ◽  
Miodrag Čelebić
Keyword(s):  
Raw Materials ◽  
Production Capacity ◽  
Mineral Resources ◽  
Building Stone ◽  
Raw Material ◽  
Material Base ◽  
Standard Quality ◽  
The Republic ◽  
Fragmentation Of Production ◽  
Republika Srpska

Curent situation of raw material base and study of limestone like construction stone deposits in the Republic of Serbian were relatively poorly considered during the last decades, and the main problems are the following: low production capacity fragmentation of production, needs for raw materials homogenization and delivering of standard quality, undeveloped market, the recession of the domestic economy and the economies in the region, the relatively low level of exploration by many deposits, especially lack of knowledge of the occurrence legality for certain types and quality of raw materials and lack of complete quality indicators for raw material, which sometimes causes the utilization of only the highest quality deposit parts.This paper provides an overview of active quarries in the Republic Srpska with exploitation of limestone like technical building stone and present an attempt to determine the basic quantitative and qualitative characteristics of the raw material and the current working conditions at these quarries. The purpose of such a review would be in an effort to create a clearer picture about production, market, social and other aspects of the limestone exploitation in the Republika Srpska and the realistic possibilities of maintaining and developing of these mineral resources utilization, which can certainlybe interesting for the development of many other industries in the Republic Srpska.

scholarly journals Improving the efficiency of leaching of metals from ore raw materials

2018 ◽  
pp. 45-57
Author(s):  
V.I. Lyashenko ◽  
F.F. Topolnyi ◽  
G.D. Kovalenko
Keyword(s):  
Underground Mining ◽  
Raw Materials ◽  
Residential Buildings ◽  
Practical Experience ◽  
Environmental Safety ◽  
Theory And Practice ◽  
Raw Material ◽  
Material Base ◽  
Seismic Safety ◽  
Industrial Buildings

Purpose. Improving the efficiency of leaching of metals from ore raw materials by justifying the parameters of underground mining and the introduction of integrated technology in combination with geotechnology, ensuring the rational use, protection of the subsurface and the environment during the development of reserves by combined geotechnological methods. Metology. The methods of generalization, analysis and evaluation of practical experience and scientific achievements in the field of geotechnology, theory and practice of explosive destruction of solid media, continuum mechanics, mathematical statistics, as well as research techniques of wave processes according to standard and new techniques of the leading experts of the world's advanced mining countries are described. Findings. The factors determining the leaching efficiency of metal ores, environmental and seismic safety are established and the parameters of the explosion are justified taking into account the size of an average linear piece of exploded ore mass, the area of an emanating surface and the seismic safety of protected objects (industrial buildings, residential buildings, the Ingul river underflow, Kropivnitsky, etc.). Originality. Recommended empirical dependence for the prediction of the oscillation speed on the reduced mass of charge per deceleration step in the explosive preparation of ore for underground leaching of metals for the field conditions of the form y = a ∙ b also the value of the permissible displacement rate of the soil at the base of the protected objects = 0.4 cm / s. Practical value. When non-conforming ores of deposits are involved in the production, their raw material base at operating mines can be increased 1.4–1.6 times. Keywords: mining technology, underground mining, metal leaching, environmental safety, efficiency.

scholarly journals Phytochemical Potential and Inhibitory Properties of New Varieties of Leguminous Plants

2019 ◽  
Vol 49 (2) ◽  
pp. 281-288
Author(s):  
Анна Вебер ◽  
Anna Veber ◽  
Светлана Леонова ◽  
Svetlana Leonova ◽  
Фирзинат Давлетов ◽  
...  
Keyword(s):  
Raw Materials ◽  
West Siberia ◽  
Raw Material ◽  
Material Base ◽  
Leguminous Plants ◽  
Biological Value ◽  
State Register ◽  
New Varieties ◽  
The Republic ◽  
High Yielding Varieties

New varieties of leguminous plants expand the range and improve the quality of healthy food products. The new legumes meet the requirements of modern food production. In addition, they demonstrate low inhibitory properties and possess a high phytochemical potential. Domestic non-GM peas and beans have a high nutritional and biological value; they are cheap, highly profitable, and can be produced in large volumes. Thus, they have a high potential for expanding the raw material base of the food industry. The Republic of Bashkortostan is the leader in pea production: the State Register of Breeding Achievements contains over 10 varieties cultivated by Bashkir scientists. Researchers of the Omsk State Agrarian University have created high-yielding varieties of beans with improved consumer qualities that are adapted to Siberian environment. However, the qualitative indicators of the new varieties remain understudied. The present research expands the raw material base for the production of healthy and functional foods with the new legumes adapted to the conditions of West Siberia and the Urals. The study features the characteristics of legumes of Siberian and Ural ecotype, which helps to expand the information database on the phytochemical potential of the new varieties. The beans were provided by the Omsk State Agrarian University, the peas – by the Bashkir Research Institute of Agriculture (harvest of 2018). The main objectives of the study were to determine the indicators that form the nutritional and biological value of the raw materials: protein content, dietary fiber, the presence and quantity of macro and microelements, enzymes, and trypsin inhibitor, also during germination.

scholarly journals State and prospects of processing tin-containing raw materials in Kazakhstan

2021 ◽  
Vol 317 (2) ◽  
pp. 37-45
Author(s):  
R.V. Sapinov ◽  
◽  
N.A. Kulenova ◽  
M.A. Sadenova ◽  
P.S. Varbanov ◽  
...  
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
High Tech ◽  
Material Base ◽  
High Tech Industry ◽  
Mineral Raw Materials ◽  
Current State ◽  
Global Demand ◽  
Efficient Extraction ◽  
The Republic

The article discusses the current state-of-the-art in the tin industry and the prospects of the Republic of Kazakhstan. The evaluation is performed in terms of the development of domestic tin production for the growing global demand and the development of the domestic high-tech industry. The study includes the main domestic sources of the raw material base of the tin, which includes mineral raw materials, anthropogenic and secondary waste. Since the most important for the contemporary tin industry are mineral raw materials, the possibility of complex processing of ore from the Syrymbet deposit was studied. Based on the results of the studies performed, it was found that the mineral tin-containing raw materials of the Syrymbet deposit, in addition to cassiterite, also contain acid-soluble tin-containing minerals (stannin, etc.). At the stage of gravity concentration, the most efficient extraction performance of tin into concentrate was found for the gravity separator – amounting to 34.2%. At the leaching stage, the most efficient extraction of tin (1,543 μg/L) showed an aqueous solution of sulfuric acid with a concentration of 100 g/L, at a temperature of 45 °C.

Adjustment of a technology of cast iron smelting in the blast furnace of jsc "ural steel" w ith a volume of 1232 см3 with charge h a v in g 95% share of Mikhailovskii GOK pellets

2021 ◽  
Vol 77 (7) ◽  
pp. 768-775
Author(s):  
I. F. Iskakov ◽  
G. A. Kunitsyn ◽  
D. V. Lazarev ◽  
А. А. Red`kin ◽  
S. A. Trubitsyn ◽  
...  
Keyword(s):  
Blast Furnace ◽  
Iron Ore ◽  
Raw Materials ◽  
Raw Material ◽  
Material Base ◽  
Hot Metal ◽  
Charging System ◽  
Iron Smelting ◽  
Gas Consumption ◽  
A Charge

To use effectively internal raw material base, JSC “Ural Steel” accomplished I category major overhaul of the blast furnace No. 2. The main purpose of the overhaul was to design a rational profile which could ensure an ability to operate with a charge containing 95 % of Mikhailovskii GOK (mining and concentrating plant) pellets having basicity of 0.5 by CaO/SiO2. The blast furnace No. 2 having useful volume of 1232 m3, was constructed by design of Danieli Corus, the Netherlands, and was blown in on December 30, 2020. In the process of guarantee tests, step-by-step increase of Mikhailovskii GOK pellets (Fetotal = 60.5 %, CaO/SiO2 = 0.5) content in the charge iron ore part was being accomplished from 55 to 95.1%. Charging of the blend containing pellets in the amount of 55% of iron ore part, was done by charging system 4OOCC + 1COOCC (Ore - Coke) with filling level 1.5 m. Under conditions of pellets part increase in the blend, the charging system was changed to decrease their content at the periphery, to increase it in the ore ridge zone and make it intermediate between periphery and the ore ridge. At the pellets share in the iron ore raw materials 0.75 the charging system was used as the following: 3OOCC + 1COOC + 1COOCC, while at the content 95.1% the following charging system was used: 2COOC + 2COOC + 1COOCC. It was noted that in the period of guarantee tests the furnace running was smooth. The average silicon content in the hot metal was 0.70% at the standard deviation 0.666. Sulfur content in the hot metal did not exceed 0.024%, the blowing and natural gas consumption figures were 2100 m3/min and 11000 m3/min correspondently, oxygen content in the blowing 26.5%, hot blowing and top smoke pressure figures were 226.5 and 109.8 KPa correspondently. The productivity of the furnace was reached as high as 2358 t/day at the specific coke rate 433 kg/t of hot metal. After guarantee tests completion, the pellets content in the iron ore part was decreased gradually from 95 down to 50%. The decreasing was made by 5% in every 6 hours of operation. Application of the mastered technology of the blast furnace No. 2 with the increased share of pellets will enable to stably supply the blast furnaces No. 1, 3 and 4 by iron ore raw materials in the proportion of 30-35% of pellets and 65-70% of sinter.

Serpentinite Magnesium Binders, Based on Technogenic Raw Materials

2021 ◽  
Vol 316 ◽  
pp. 1050-1054
Author(s):  
V.N. Zyryanova ◽  
E.V. Lytkina ◽  
A.P. Ochur-Ool
Keyword(s):  
Mechanical Strength ◽  
Water Resistance ◽  
Raw Materials ◽  
Raw Material ◽  
Material Base ◽  
Hardening Process ◽  
Dispersed System ◽  
Technogenic Raw Materials

Increasing water resistance and mechanical strength of hardening magnesian binders’ products can be achieved by introducing microfillings into a hardening dispersed system. It is shown that serpentine provides an increase strength and water resistance in hydration and hardening process, being as a structure-forming component, it intensifies this process. It allows expanding the raw material base for the production of magnesia binders for construction purposes.

Technological aspects of alcohol distillates production from non-traditional sugar-raw materials

2021 ◽  
Vol 9 (16) ◽  
pp. 90-97
Author(s):  
Kateryna Danilova ◽  
◽  
Oksana Zavarzina ◽  
Keyword(s):  
Raw Materials ◽  
Biologically Active ◽  
Raw Material ◽  
Material Base ◽  
Growth Substances ◽  
Technological Properties ◽  
Actual Problem ◽  
Cane Molasses ◽  
Yeast Biomass ◽  
Nitrogen Phosphorus

An actual problem of the alcohol industry development is the expansion of the raw material base through the use of new, cheaper types of carbohydrate sources. Recently, glucose-fructose syrup has been of increasing interest to producers of ethanol. Among the producers of craft drinks, in particular rum-based drinks, cane molasses is in increasing demand. The article presents the technological aspects of the fermentation process of nonconventional sugar-containing raw materials on the example of glucose-fructose syrup and cane molasses in ethanol by different yeast strains. It is determined that glucose-fructose syrup and cane molasses are raw materials depleted of nitrogen, phosphorus and growth substances necessary for the yeast activity. To improve the technological properties of raw materials in the molasses, nitrogen, phosphorus nutrition and corn extract as a growth substance shall be added to a mash. Glucose-fructose syrup is of pH 3.68 and of acidity 0.12, which negatively affects the fermentation. It is established that in order to create optimal living conditions for yeast, it is necessary to add substances to the glucose-fructose syrup that will contribute to the safety of development and prevent the pH 3.5. It was determined that the alcohol yield from 1 ton of glucose-fructose syrup is 31.0 dal, from 1 ton of cane molasses is 24.0 dal on the yeast 46ED and 22 dal on the TegaYeast without the use of growth substances and vitamins necessary for the reproduction of yeast biomass. Under conditions of improving the technological properties of the mash from the glucose-fructose syrup and cane molasses by adding biologically active substances promoting the synthesis of yeast biomass, the ethanol content in the fermented mashes increases up to 11.9 12% vol.

scholarly journals Antimicrobial Activity and Polyphenol Profiles of Hydroalcoholic Extracts of Thymus rasitatus Klokov and Thymus eremita Klokov

2021 ◽  
Vol 9 (A) ◽  
pp. 313-317
Author(s):  
Svetlana Ivasenko ◽  
Ainur Zhumabekova ◽  
Agnieszka Ludwiczuk ◽  
Krystyna Skalicka–Wozniak ◽  
Alexandr Marchenko ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Chromatographic Analysis ◽  
Antimicrobial Agents ◽  
Raw Materials ◽  
Wide Spectrum ◽  
Raw Material ◽  
Thymus Vulgaris ◽  
Material Base ◽  
Ultrasound Assisted Extraction ◽  
Ethanol Extracts

BACKGROUND: A possible reduction in stocks of medicinal plant raw materials of Thymus serpyllum L. and Thymus vulgaris L. leads to the need to expand the raw material base of the official medicinal plants with using of endemic species of the flora of Kazakhstan, in particular, Thymus rasitatus Klokov, and Thymus eremita Klokov. AIM: The aim of the study was to study the possibility of using 70% ethanol extracts of T. rasitatus and T. eremita as antimicrobial agents. MATERIALS AND METHODS: The aerial parts of T. rasitatus and T. eremita were extracted with 70% ethanol using ultrasound assisted extraction. The qualitative and quantitative analyses of the 70% ethanol extracts were determined using the liquid chromatography-detection-ESI-mass spectrometry-(MS)/MS technique. The study of the antimicrobial activity of these extracts was performed for eight strains of Gram-positive bacteria, six strains of Gram-negative bacteria, and four cultures of fungi. RESULTS: Chromatographic analysis of hydroalcoholic extracts of both investigated Thymus species showed very similar phenolic compounds composition. In both cases, the major components are luteolin-7-O-glucoside and rosmarinic acid. About 70% ethanol extracts of T. rasitatus and T. eremita have a broad spectrum of antimicrobial activity, exhibit the bactericidal or bacteriostatic activity against all tested bacteria and fungi at concentration range of 0.0195–20 mg/ml, but differ in their potency against tested strains of microorganisms. CONCLUSION: About 70% ethanol extracts of T. rasitatus and T. eremita, endemic plants in the flora of Kazakhstan, can be considered as potential drugs with a wide spectrum of antimicrobial activity. The results of chromatographic analysis could be used for drug standardization.

scholarly journals Physical and Chemical Fundamentals and Technical Solutions for Recovery of Non-ferrous and Rare Metals from Industrial Wastes

2020 ◽  
Author(s):  
P.A. Kozlov ◽  
A.M. Panshin ◽  
L.I. Leontiev
Keyword(s):  
Russian Federation ◽  
Raw Materials ◽  
Block Diagram ◽  
Industrial Wastes ◽  
Raw Material ◽  
Material Base ◽  
Waelz Process ◽  
Zinc Cadmium ◽  
The Russian Federation ◽  
Increasing Demand

The increasing demand for zinc and a range of zinc-related metals (for example: lead; indium; tin; cadmium; and copper) in the Russian Federation cannot be satisfied by the existing production plants due to the lack of raw materials. At the same time, ferrous and non-ferrous metallurgy and the chemical industry have accumulated hundreds of millions of tons of zinc wastes (falling into the hazard categories 2 to 4), the processing of which could not only make up the raw material base, but also improve the environmental situation. In the world, over 85% of ferrous dust is recycled using the Waelz process. The Waeltz process is used for distilling separation of elements under reducing conditions. In this study, a block diagram for production of the following elements from industrial wastes is proposed: zinc, cadmium and indium in form of massive metals; zinc and indium in the form of fine powders; and clinker as a raw material for cement production. The technical and scientific details of this new process have been patented in the Russian Federation and abroad. For the first time, the following operations have been implemented with the use of large-sized Waelz kilns: vapour-oxidized Waeltz treatment of polymetallic wastes; recycling of heat from gases and solid products with generation of process fumes; and implementation of alternative flux (dolomite) and alternative fuel (petroleum coke). Keywords: Waelz process, industrial wastes, heat recycling, vapour-oxidized Waelz processing

scholarly journals Construction sands of Podillya: patterns of distribution, resources and use

2019 ◽  
Vol 27 (3) ◽  
pp. 510-519
Author(s):  
M. Syvyj ◽  
B. Gavrychok
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Simultaneous Increase ◽  
Clay Material ◽  
Material Base ◽  
Resource Base ◽  
Apparent Correlation ◽  
The Baltic ◽  
Further Development

This article presents the characteristics of the resource base of building sands within the three Podillya regions, the patterns of sands distribution, and proposals for increasing the extraction of raw materials . The construction sands of Podillya are confined to the Upper Cretaceous, Neogene and Anthropogenicdeposits. The decrease of the thickness of the sandy strata of the Opilsk Neogene suite in the eastern direction was observed with the simultaneous increase in the thickness of the overlapping strata of the rocks. There is no apparent correlation between the thickness of sandy interlayers and the quality of sands. The interdependence of the chemical composition of Neogene sands and the sand size module is established.The genetic predisposition for the distribution of building sands in different parts of the Podillya territory has been established. Four groups of sand deposits of different age have been identified within the Podillya regions, which contrast sharply with single deposits in the neighbouring territories.There is a very uneven distribution of explored reserves of sandy raw materials across the region and accordingly in the provision of construction sands in the different oblasts /regions of Podillya. The areas best provided with sandy raw materials are the central districts of Ternopil region and Slavutsky district of Khmelnytsky region . Sands of the Baltic stage distributed in Vinnytsia region are mostly poor in quality, clogged with clay material and require enrichment. The further development of the mineral raw material base and the prospects for increasing the production of construction sand in the Podillya regions is associated with the increase in production at the prepared deposits, the commissioning of reserve deposits, the conducting of prospecting and exploration work in the proposed potentially exploitable areas and additional exploration of individual deposits that are exploited. The research allows us to evaluate objectively the existing base of sand raw materials for various purposes in the Podillya region and to develop on this basis measures to increase it. The importance of the study is determined by the acute shortage of the raw material in most administrative districts of Khmelnytsky and Vinnytsia regions, by the growth in the volume of construction work (and accordingly the requirements for sandy raw materials) both in Podillya and in the country.

Sign in / Sign up

Export Citation Format

Share Document