scholarly journals Research the chip formation process thermoplastic turning

2020 ◽  
pp. 46-48
Author(s):  
O. YU. Erenkov
Keyword(s):  
Formation Process ◽  
Chip Formation ◽  
Experimental Studies ◽  
Polymer Materials ◽  
Cutting Depth ◽  
The Relationship ◽  
Cutting Modes

The article presents the results of experimental studies of the relationship between the characteristics of cutting modes and nature of chip formation for thermoplastics blanks. Caprolon and fl uoroplast-4 were used as the studied materials. It has been experimentally proved that the cutting depth has the maximum eff ect on the chip formation character when turning blanks from the studied polymer materials.

Digital twin of the chip formation process

2020 ◽  
pp. 81-86
Author(s):  
Yu.G. Kabaldin ◽  
D.A. Shatagin ◽  
M.S. Anosov ◽  
A.M. Kuz'mishina
Keyword(s):  
Neural Network ◽  
Control System ◽  
Crystal Lattice ◽  
Network Model ◽  
Intelligent Control ◽  
Neural Network Model ◽  
Formation Process ◽  
Chip Formation ◽  
Intelligent Control System ◽  
The Relationship

The formation of chips during the processing of various materials was studied. The relationship between the type of chips, the type of crystal lattice of the material and the number of sliding systems is shown. A neural network model of chip formation is developed, which allows predicting the type of chips. An intelligent control system for the process of chip formation during cutting is proposed. Keywords: chip formation, crystal lattice, neural network model, type of chips. [email protected]

Potential Role of Inflammation in Associations between Particulate Matter and Heart Failure

2018 ◽  
Vol 24 (3) ◽  
pp. 341-358 ◽  
Author(s):  
Xiaotong Ji ◽  
Yingying Zhang ◽  
Guangke Li ◽  
Nan Sang
Keyword(s):  
Heart Failure ◽  
Particulate Matter ◽  
Inflammatory Response ◽  
Heart Diseases ◽  
Experimental Studies ◽  
Epidemiological Studies ◽  
Inflammatory Mechanism ◽  
High Concentrations ◽  
Future Work ◽  
The Relationship

Recently, numerous studies have found that particulate matter (PM) exposure is correlated with increased hospitalization and mortality from heart failure (HF). In addition to problems with circulation, HF patients often display high expression of cytokines in the failing heart. Thus, as a recurring heart problem, HF is thought to be a disorder characterized in part by the inflammatory response. In this review, we intend to discuss the relationship between PM exposure and HF that is based on inflammatory mechanism and to provide a comprehensive, updated evaluation of the related studies. Epidemiological studies on PM-induced heart diseases are focused on high concentrations of PM, high pollutant load exposure in winter, or susceptible groups with heart diseases, etc. Furthermore, it appears that the relationship between fine or ultrafine PM and HF is stronger than that between HF and coarse PM. However, fewer studies paid attention to PM components. As for experimental studies, it is worth noting that coarse PM may indirectly promote the inflammatory response in the heart through systematic circulation of cytokines produced primarily in the lungs, while ultrafine PM and its components can enter circulation and further induce inflammation directly in the heart. In terms of PM exposure and enhanced inflammation during the pathogenesis of HF, this article reviews the following mechanisms: hemodynamics, oxidative stress, Toll-like receptors (TLRs) and epigenetic regulation. However, many problems are still unsolved, and future work will be needed to clarify the complex biologic mechanisms and to identify the specific components of PM responsible for adverse effects on heart health.

scholarly journals Experimental studies on the transformation from firn to ice in the wet-snow zone of temperate glaciers

1997 ◽  
Vol 24 ◽  
pp. 181-185 ◽  
Author(s):  
Katsuhisa Kawashima ◽  
Tomomi Yamada
Keyword(s):  
Experimental Studies ◽  
Ice Formation ◽  
Compression Tests ◽  
Densification Rate ◽  
Overburden Pressure ◽  
Proportionality Constant ◽  
Wet Snow ◽  
Water Saturated ◽  
The Relationship ◽  
Good Agreement

The densification of water-saturated firn, which had formed just above the firn-ice transition in the wet-snow zone of temperate glaciers, was investigated by compression tests under pressures ranging from 0.036 to 0.173 MPa, with special reference to the relationship between densification rate, time and pressure. At each test, the logarithm of the densification rate was proportional to the logarithm of the time, and its proportionality constant increased exponentially with increasing pressure. The time necessary for ice formation in the firn aquifer was calculated using the empirical formula obtained from the tests. Consequently, the necessary time decreased exponentially as the pressure increased, which shows that the transformation from firn in ice can be completed within the period when the firn aquifer exists, if the overburden pressure acting on the water-saturated firn is above 0.12–0.14 MPa. This critical value of pressure was in good agreement with the overburden pressure obtained from depth–density curves of temperate glaciers. It was concluded that the depth of firn–ice transition was self-balanced by the overburden pressure to result in the concentration between 20 and 30 m.

scholarly journals Application of intelligent orienteering based on Internet of things

2020 ◽  
Vol 2020 (1) ◽  
Author(s):  
Donghui Zhang ◽  
Ruijie Liu
Keyword(s):  
Internet Of Things ◽  
Network Architecture ◽  
Emergency Services ◽  
Simulation Experiment ◽  
Experimental Studies ◽  
Signal Stability ◽  
Anchor Nodes ◽  
Set Up ◽  
The Relationship ◽  
The Internet Of Things

Abstract Orienteering has gradually changed from a professional sport to a civilian sport. Especially in recent years, orienteering has been widely popularized. Many colleges and universities in China have also set up this course. With the improvement of people’s living conditions, orienteering has really become a leisure sport in modern people’s life. The reduced difficulty of sports enables more people to participate, but it also exposes a series of problems. As the existing positioning technology is relatively backward, the progress in personnel tracking, emergency services, and other aspects is slow. To solve these problems, a new intelligent orienteering application system is developed based on the Internet of things. ZigBee network architecture is adopted in the system. ZigBee is the mainstream scheme in the current wireless sensor network technology, which has many advantages such as convenient carrying, low power consumption, and signal stability. Due to the complex communication environment in mobile signal, the collected information is processed by signal amplification and signal anti-interference technology. By adding anti-interference devices, video isolators and other devices, the signal is guaranteed to the maximum extent. In order to verify the actual effect of this system, through a number of experimental studies including the relationship between error and traffic radius and the relationship between coverage and the number of anchor nodes, the data shows that the scheme studied in this paper has a greater improvement in comprehensive performance than the traditional scheme, significantly improving the accuracy and coverage. Especially the coverage is close to 100% in the simulation experiment. This research has achieved good results and can be widely used in orienteering training and competition.

Modeling and numerical simulation of the chip formation process when machining Nomex

2021 ◽  
Author(s):  
Tarik Zarrouk ◽  
Jamal-Eddine Salhi ◽  
Samir Atlati ◽  
Mohammed Nouari ◽  
Merzouki Salhi ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Formation Process ◽  
Chip Formation

Relation between understanding and agreeing in response to one-sentence assertion*

2014 ◽  
Vol 7 (1) ◽  
pp. 36-67 ◽  
Author(s):  
YASUHIRO OZURU ◽  
DAVID BOWIE ◽  
GIULIA KAUFMAN
Keyword(s):  
Cognitive Processes ◽  
Experimental Studies ◽  
Cognitive Response ◽  
Response Options ◽  
Evaluative Response ◽  
Quasi Experimental ◽  
The Relationship

abstractThree quasi-experimental studies were conducted to investigate the relationship between the evaluative (i.e., agree/true) and the meta-cognitive (i.e., understand) response, and to determine which type of response people are more likely to provide when responding to one-sentence assertive statements. In Studies 1 and 2, participants performed two separate tasks in which they were asked to indicate the levels of: (i) understanding and (ii) agreement / perceived truthfulness of 126 one-sentence statements. The results indicated that participants were likely to provide a negative evaluative response (i.e., disagree/false) to a statement that they did not understand. In Study 3, participants were asked to evaluate the same 126 statements and choose between four response options: agree, disagree, understand, do not understand. The results indicated that people are more likely provide an evaluative response regardless of the understandability of a statement. The results of these studies are discussed in relation to (i) pragmatic perspective of how people infer speakers’ meaning, and (ii) cognitive processes underlying evaluative and meta-cognitive response.

ANALYSIS OF THE ERROR IN DETERMINING THE EQUIVALENT SIZE OF A DEFECT BY THE STANDARDLESS METHOD DURING ULTRASONIC TESTING

2021 ◽  
pp. 50-57
Author(s):  
A. N. Kireev ◽  
M. A. Kireeva
Keyword(s):  
Relative Error ◽  
High Reliability ◽  
Ultrasonic Method ◽  
Experimental Studies ◽  
Standard Samples ◽  
Defect Identification ◽  
Identification Method ◽  
Maximum Value ◽  
Software Product ◽  
The Relationship

The article provides a review and analysis of the defect identification method for determining the size of discontinuities when diagnosing various machine parts and units by the manual ultrasonic method. This method makes it possible to determine the equivalent size of discontinuities of various types without using standard samples of an enterprise: point planar and volumetric; extended planar and volumetric. The method is based on the use of the relationship between the amplitude and time characteristics of the echo signal from the discontinuity and the backside signal in the object being diagnosed and the equivalent size of the discontinuity. The article presents the mathematical apparatus for the implementation of this method. Also presented is a software product that allows you to automate calculations when using this defect identification method. The article contains experimental studies of the method for determining the equivalent dimensions of discontinuities of various types, which have shown its high reliability. The maximum value of the relative error in determining the equivalent size of a point planar discontinuity was 2.867 %. The maximum value of the relative error in determining the equivalent size of a point volumetric discontinuity was 1.986 %. The maximum value of the relative error in determining the transverse equivalent size of an extended planar discontinuity was 0.667 %. The maximum value of the relative error in determining the transverse equivalent size of an extended volumetric discontinuity was 1.95 %.

SOFTWARE FOR CONTROL SYSTEMS FOR «SMART» RESIDENTIAL BUILDING

2021 ◽  
Vol 14 (1) ◽  
pp. 58-67
Author(s):  
Sergey Polyakov ◽  
V. Akimov ◽  
A. Polukazakov ◽  
Vladimir Zolnikov ◽  
P. Enin
Keyword(s):  
Structural Changes ◽  
Life Support ◽  
Assembly Language ◽  
Experimental Studies ◽  
Residential Building ◽  
Heating System ◽  
Liquid Level ◽  
Virtual Object ◽  
Level Control ◽  
The Relationship

The article deals with the issues of modeling and management of life support systems of a residential building. The resulting model of the liquid level in the tank allows you to establish the relationship between the level and the flow rate of the liquid. The results of the selection and justification of the fluid level control structure are presented. An algorithm that implements the operation of a virtual object is given. The structure of the automatic control system (ACS) of the liquid level is technically implemented in an open type. The results confirming the achievability of the proposed structural changes are obtained. The results of experimental studies are presented. The choice and justification of the method of controlling the heating system and the liquid level in the tank are considered. Programs for managing subsystems of a residential building in Assembly language, C++, and ladder diagrams are presented. A model for controlling the liquid level in a Multisim environment is proposed.

scholarly journals Investigations on Torsion of the Two-Chords Single Laced Members

2017 ◽  
Vol 25 (2) ◽  
pp. 147-160
Author(s):  
Paweł Lorkowski ◽  
Bronisław Gosowski
Keyword(s):  
Cross Sections ◽  
Experimental Studies ◽  
The Finite Element Method ◽  
Second Moment ◽  
Steel Columns ◽  
Numerical Studies ◽  
Traction Network ◽  
Railway Traction ◽  
Parametric Analyses ◽  
The Relationship

Abstract The paper presents experimental and numerical studies to determine the equivalent second moment of area of the uniform torsion of the two-chord steel single laced members. The members are used as poles of railway traction network gates, and steel columns of framed buildings as well. The stiffness of uniform torsion of this kind of columns allows to the determine the critical loads of the spatial stability. The experimental studies have been realized on a single - span members with rotation arrested at their ends, loaded by a torque applied at the mid-span. The relationship between angle of rotation of the considered cross-section and the torque has been determined. Appropriate numerical model was created in the ABAQUS program, based on the finite element method. A very good compatibility has been observed between experimental and numerical studies. The equivalent second moment of area of the uniform torsion for analysed members has been determined by comparing the experimental and analytical results to those obtained from differential equation of non-uniform torsion, based on Vlasov’s theory. Additionally, the parametric analyses of similar members subjected to the uniform torsion, for the richer range of cross-sections have been carried out by the means of SOFiSTiK program. The purpose of the latter was determining parametrical formulas for calculation of the second moment of area of uniform torsion.

Sign in / Sign up

Export Citation Format

Share Document