scholarly journals MUTU KIMIAWI TERASI DENGAN FORMULASI UDANG REBON (Acetes sp) DAN IKAN RUCAH YANG BERBEDA

2017 ◽  
Vol 4 (2) ◽  
pp. 166
Author(s):  
Nabila Ukhty ◽  
Anhar Rozi ◽  
Andiani Sartiwi

Terasi is a product of fermentation-based on rebon or fish with the addition of salt. Fermentation with salt led to an overhaul of proteins into amino acids eg glutamic acid as a producer of distinctive taste shrimp paste. Raw material, salt concentration and fermentation time is an important factor in the process of making paste. This study aimed to analyze the effect of different formulations of rebon (Acetes sp) and HTS generated against chemical quality paste. Raw materials used in this study is rebon (Acetes sp.) and fish HTS. Treatment used is the difference rebon formulation composition of fish and meat. Research methods using the experimental method with descriptive design field. Parameters tested include moisture content, ash content, fat content, protein, carbohydrates, pH, and glutamic acid. Based on the results obtained paste with the best formulation of the paste P1 treatment with a water content of 15.48%, 39.52% ash content, the fat content of 7.23%, 42.50% protein content, carbohydrate content of 4.73%, pH 5 , 67%, and 22.56% glutamic acid.

Author(s):  
Halyna Feshchenko ◽  
Oleksandra Oleshchuk ◽  
Liudmyla Slobodianiuk ◽  
Ivanna Milian

The use of plant raw materials is one of the areas of modern pharmaceutical science in the production of herbal drugs. The genus Epilobium counts more than 200 species, many species of which are used in traditional medicine. Among the Epilobium species, Epilobium angustifolium is one of the well-known medicinal plants which have been used worldwide in habitual medicine. There is insufficient information in the literature on the biologically active substances of Epilobium angustifolium L. The presence of three major polyphenol groups: phenolic acids, flavonoids, and ellagitannins were identified in E. angustifolium extracts. Traditionally, the infusion of leaves of this plant could be useful for headaches, cold and gastrointestinal disorder. The Epilobium angustifolium L. as an insufficiently studied plant is a promising object of study, including amino acids composition. To assess the relationship between the production of primary metabolites and their possible therapeutic properties, we analyzed the amino acid profile of the plant Epilobium angustifolium used in traditional medicine. The study of compounds generated by plants as a result of defense mechanisms permits an understanding of the molecular mechanism involved in their medicinal properties. The aim. Thus, the aim of the study was to conduct an HPLC analysis of the amino acids of E. angustifolium to establish the prospects for the use of the raw materials in medical and pharmaceutical practice. The results of the current study will be used in further breeding programs aimed to obtain an industrial form of E. angustifolium suitable for pharmaceutical and food applications. Materials and methods. The determination of amino acids composition of Epilobium angustifolium was conducted using Agilent 1200 (Agilent Technologies, USA). Results. The HPLC method identified sixteen free amino acids and seventeen bound amino acids in the Epilobium angustifolium herb. The studies have shown that Epilobium angustifolium L. herb is mainly composed of free amino acids such as L-phenylalanine (1.65 µg/mg), L-glutamic acid (1.51 µg/mg), L-arginine (1.24 µg/mg), L-alanine (0.98 µg/mg) and L-aspartic acid (0.57 µg/mg), which were presents in the greatest amount. The dominant bound amino acids in the studied raw material were L-glutamic acid, L-aspartic acid, L-leucine, and L-alanine, the content of which was 32.37 µg/mg, 10.59 µg/mg, 8.70 µg/mg, and 6.22 µg/mg respectively. Conclusions. Using the HPLC method determined the amino acids in the herb of Epilobium angustifolium L. The concentrations of L-aspartic acid, L-glutamic acid, L-arginine, L-alanine and L-phenylalanine are predominate among free and bound amino acids in the Epilobium angustifolium L. herb. The result shows that Epilobium angustifolium L. is the source of amino acids, so the use of this plant raw material for new remedies is possible in the future


Food Research ◽  
2021 ◽  
Vol 5 (S2) ◽  
pp. 45-50
Author(s):  
A.M. Sari ◽  
D.A. Artini ◽  
D. Ishartani ◽  
A. Nursiwi ◽  
M.Z. Zaman

In addition to soybean, Leucaena leucocephala is one of the tempe raw materials usually used in Indonesia. These tempe is only made by peoples in a few areas in the southern part of Java such as Wonogiri, Gunungkidul and Pacitan. For some purposes, such as cooking ingredients, tempe is deliberately fermented longer than usual to obtain a savory taste. In a previous study, we had studied leucaena tempe or people known as lamtoro tempe that process in Wonogiri and reported that there had been a change in characteristic during fermentation until over-fermented tempe. Therefore, in this research, we analyzed the change in the chemical and microbiological characteristic of lamtoro tempe from Pacitan during continued fermentation. This research showed that during the fermentation process, mold, yeast, and lactic acid bacteria (LAB) persisted for up to 126 hrs of fermentation time. The growth of yeast and mold tend to decrease while LAB continued to increase until it reached 11 log CFU/mL. In addition, the moisture content, ash content, soluble protein levels, pH and titrated acid increased during continued fermentation time. Glutamic acid and aspartic acid were the highest amino acids by weight percentage. Both amino acids have an important role in the sensory characteristics of lamtoro tempe.


Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  


Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2237 ◽  
Author(s):  
P. R. Sarika ◽  
Paul Nancarrow ◽  
Abdulrahman Khansaheb ◽  
Taleb Ibrahim

Phenol–formaldehyde (PF) resin continues to dominate the resin industry more than 100 years after its first synthesis. Its versatile properties such as thermal stability, chemical resistance, fire resistance, and dimensional stability make it a suitable material for a wide range of applications. PF resins have been used in the wood industry as adhesives, in paints and coatings, and in the aerospace, construction, and building industries as composites and foams. Currently, petroleum is the key source of raw materials used in manufacturing PF resin. However, increasing environmental pollution and fossil fuel depletion have driven industries to seek sustainable alternatives to petroleum based raw materials. Over the past decade, researchers have replaced phenol and formaldehyde with sustainable materials such as lignin, tannin, cardanol, hydroxymethylfurfural, and glyoxal to produce bio-based PF resin. Several synthesis modifications are currently under investigation towards improving the properties of bio-based phenolic resin. This review discusses recent developments in the synthesis of PF resins, particularly those created from sustainable raw material substitutes, and modifications applied to the synthetic route in order to improve the mechanical properties.


2021 ◽  
Vol 20 (1) ◽  
Author(s):  
Prabin Koirala ◽  
Ndegwa Henry Maina ◽  
Hanna Nihtilä ◽  
Kati Katina ◽  
Rossana Coda

Abstract Background Lactic acid bacteria can synthesize dextran and oligosaccharides with different functionality, depending on the strain and fermentation conditions. As natural structure-forming agent, dextran has proven useful as food additive, improving the properties of several raw materials with poor technological quality, such as cereal by-products, fiber-and protein-rich matrices, enabling their use in food applications. In this study, we assessed dextran biosynthesis in situ during fermentation of brewers´ spent grain (BSG), the main by-product of beer brewing industry, with Leuconostoc pseudomesenteroides DSM20193 and Weissella confusa A16. The starters performance and the primary metabolites formed during 24 h of fermentation with and without 4% sucrose (w/w) were followed. Results The starters showed similar growth and acidification kinetics, but different sugar utilization, especially in presence of sucrose. Viscosity increase in fermented BSG containing sucrose occurred first after 10 h, and it kept increasing until 24 h concomitantly with dextran formation. Dextran content after 24 h was approximately 1% on the total weight of the BSG. Oligosaccharides with different degree of polymerization were formed together with dextran from 10 to 24 h. Three dextransucrase genes were identified in L. pseudomesenteroides DSM20193, one of which was significantly upregulated and remained active throughout the fermentation time. One dextransucrase gene was identified in W. confusa A16 also showing a typical induction profile, with highest upregulation at 10 h. Conclusions Selected lactic acid bacteria starters produced significant amount of dextran in brewers’ spent grain while forming oligosaccharides with different degree of polymerization. Putative dextransucrase genes identified in the starters showed a typical induction profile. Formation of dextran and oligosaccharides in BSG during lactic acid bacteria fermentation can be tailored to achieve specific technological properties of this raw material, contributing to its reintegration into the food chain.


Cerâmica ◽  
2013 ◽  
Vol 59 (351) ◽  
pp. 473-480 ◽  
Author(s):  
K. C. P. Faria ◽  
J. N. F. Holanda

The sugarcane industry generates huge amounts of sugarcane bagasse ashes (SCBA). This work investigates the incorporation of a SCBA waste as an alternative raw material into a clay body, replacing natural clay material by up to 20 wt.%. Clay ceramic pieces were produced by uniaxial pressing and fired at temperatures varying from 700 to 1100 ºC. The technological properties of the clay ceramic pieces (linear shrinkage, apparent density, water absorption, and tensile strength) as function of the firing temperature and waste addition are investigated. The phase evolution during firing was followed by X-ray diffraction. The results showed that the SCBA waste could be incorporated into red ceramics (bricks and roofing tiles) in partial replacement for natural clay material. These results confirm the feasibility of valorisation of SCBA waste to produce red ceramic. This use of SCBA can also contribute greatly to reducing the environmental problems of the sugarcane industry, and also save the sources of natural raw materials used in the ceramic industry.


2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Dwi Septiyana Sari ◽  
◽  
Susanti Sundari

Abstract This study discusses the use of fly ash waste from coal burning on the manufacture of PCC (Portland composite cement) at PT. XYZ Lampung. The purpose of this research is to look at the technical studies and the efficiency of raw materials in the use of fly ash in cement making, in this case PCC cement (Portland Composite Cement). The steps taken in analyzing the data in this study were viewed from a technical aspect by means of a physical test, namely the cement compressive strength test at the age of 3 days, 7 days, and 28 days using the Compression Testing Machine. This test was conducted to see the comparison of the compressive strength of PCC cement using limestone and fly ash as raw materials, then calculate the difference in raw material costs in the year before and after the replacement of limestone with fly ash. The results showed that cement with the addition of fly ash after 3 days, 7 days and 28 days had an increased compressive strength value, which increased 21.69%, 16.07% and 8.05% respectively of the compressive strength of cement using limestone. The use of fly ash as a substitute for limestone has an effect on the cost of raw materials, where the difference between the cost of raw materials in 2019 and the cost of raw materials in 2018 is Rp. 39,440,952,074.


2020 ◽  
Vol 19 (5-6) ◽  
pp. 155-159
Author(s):  
Ksenia N. Semenyuta ◽  
Anna A. Shmygareva ◽  
Anatoly N. Sankov

Introduction. The aim of the study is to perform the anatomical and histological analysis of the roots of Rheum palmatum L. and Rheum officinale B., and also to check histochemical reactions for the presence of anthracene derivatives. Material and methods. The methodological basis of the anatomical and histological studies was the standard method for the preparation of micro-preparations of roots of Rheum palmatum L. and Rheum officinale B. described in the State Pharmacopoeia of the Russian Federation, XIV edition (OFS.1.5.3.003.15). Results and discussion. Anatomical and histological studies of Rheum palmatum L. and Rheum officinale B. raw materials confirmed the roots of Rheum palmatum L. to have classical secondary structure, while the roots of Rheum officinale B. have classical primary structure. The histochemical reaction to anthracene derivatives with 10% alkali solution was carried out, it resulted in cherry-red staining of core rays and some structures of cortical parenchyma of the fragment of Rheum palmatum L., while the roots of Rheum officinale B. failed to stain. Conclusions. The anatomical and histological studies of the rhizomes and roots of Rheum palmatum L. and Rheum officinale B. demonstrate the difference in the structure of closely related species of plants. It makes possible to identify the medicinal raw material of these plants.


2017 ◽  
Vol 2 (2) ◽  
pp. 146-152
Author(s):  
Denny Lukianto Kumala ◽  
Soetam Rizky Wicaksono

In the manufacturing process Bus and Mini Bus, a lot of the raw materials required. Raw materials are stored at many warehouses (especially on Body PT. XYZ Malang). Materials / goods are highly vulnerable to lost or stolen. The most influential factor in it is the counting system inventory / materials and administration. These changes will have an impact on the process of goods more accurate calculation based on the demand of production. Losses will have a greater likelihood of being used if the system can not address the calculation of the goods/raw materials better.And administration system that can cope with the calculation of the goods/raw materials are better here is a system that can calculate expenditures for production based on the incoming bill alone, and can calculate the receipt of goods in accordance with the letter received by the supplier. The system can also provide reports based on existing transactions during a certain period.With the inventory system and the administration is then the difference between the goods that previously occurred can be minimized and raw material inventory accounting system can work better.


2019 ◽  
Vol 1 (2) ◽  
pp. 415-423
Author(s):  
Elia Rahayu R ◽  
Nor Norisanti ◽  
Acep Samsudin

The purpose of this study is to control the supply of raw materials using the Economic Order Quantity (EOQ) method in Tahu Nugraha Jaya Sukabumi UKM. The data analysis method used is quantitative descriptive to describe and describe the data to be examined and then processed using EOQ. This study uses the EOQ method to determine the total inventory cost. The data needed in this study are the number of purchases of raw materials, the amount of use of raw materials, storage costs, and ordering costs. The results of this study indicate that by applying the EOQ method can further optimize the supply of raw materials by minimizing raw materials with increased inventory. With the application of the Economic Order Quantity (EOQ) method it shows more efficient than conventional methods of the company. Conclusions, seen from the difference in the TIC of the two methods, the more efficient method is the Economic Order Quantity (EOQ) method that is equal to 244,392.94 while the calculation used by the company is 374,325. so that it can be obtained that there is a difference between the Company TIC and the EIC method TIC. Keywords: Raw Material Inventory, Production Process


Sign in / Sign up

Export Citation Format

Share Document