Normalization of the permissible error in measuring the mass when controlling the parts of the connecting rod-piston group

2021 ◽  
pp. 40-44
Author(s):  
Keyword(s):  
Measurement Error ◽  
Mass Difference ◽  
Measuring Instruments ◽  
Connecting Rod ◽  
Mass Measurements ◽  
Indirect Measurements ◽  
Piston Group ◽  
Complete Set ◽  
The Difference

The problems related to the standardization of the error in the mass measurements when dividing products into groups and picking according to the difference in mass are considered. On the basis of the theory of probabilities and the basic provisions of metrology, a dependence is obtained to determine the error of the mass difference. Recommendations are given for improving the metrological support of indirect measurements of the mass difference, a formula is determined for calculating the normalized values of errors depending on the tolerances for the mass difference, and criteria for choosing measuring instruments for controlling the mass difference of parts at the stage of completing the connecting rod-piston group during the production and repair of engines are considered. The measurement error is estimated when using preassembly selection of parts by weight. Keywords: quality of measurements, mass measurements, mass difference, indirect measurements, choice of measuring instruments, permissible measurement error, complete set of connecting rod and piston group. [email protected]

Substantiation of the allowable measurement error when controlling deviations of the shape and lication of the surfaces of parts

2020 ◽  
pp. 42-45
Author(s):  
N.Zh. Shkaruba ◽  
O.A. Leonov
Keyword(s):  
Measurement Error ◽  
Measurement Errors ◽  
Measuring Instruments ◽  
Indirect Measurements ◽  
Allowable Error ◽  
Limiting Errors

Criteria for choosing measuring instruments for controlling deviations in the shape and location of surfaces of parts are theorerically substantiated, taking into account the formula for their calculation as a result of indirect measurements. The allowable measurement errors and limiting errors of measuring instruments for monitoring the deviation of the shape and location of the surfaces of new parts of Yaroslavl Motor Plant engines were determined. Keywords: control, indirect measurements, error, deviations of the shape and location of surfaces, measuring instruments, allowable error. [email protected]

Letter to the Editor: The Continuing Challenge of Evaluating RSD Impairment and Disability

1998 ◽  
Vol 3 (5) ◽  
pp. 8-10
Author(s):  
Robert L. Knobler ◽  
Charles N. Brooks ◽  
Leon H. Ensalada ◽  
James B. Talmage ◽  
Christopher R. Brigham
Keyword(s):  
Disability Evaluation ◽  
Body Part ◽  
Loss Of Function ◽  
Regulatory Requirements ◽  
Major Cardiac Event ◽  
Clinical Scenarios ◽  
Impairment Score ◽  
Occupational Activities ◽  
The Difference

Abstract The author of the two-part article about evaluating reflex sympathetic dystrophy (RSD) responds to criticisms that a percentage impairment score may not adequately reflect the disability of an individual with RSD. The author highlights the importance of recognizing the difference between impairment and disability in the AMA Guides to the Evaluation of Permanent Impairment (AMA Guides): impairment is the loss, loss of use, or derangement of any body part, system, or function; disability is a decrease in or the loss or absence of the capacity to meet personal, social, or occupational demands or to meet statutory or regulatory requirements because of an impairment. The disparity between impairment and disability can be encountered in diverse clinical scenarios. For example, a person's ability to resume occupational activities following a major cardiac event depends on medical, social, and psychological factors, but nonmedical factors appear to present the greatest impediment and many persons do not resume work despite significant improvements in functional capacity. A key requirement according to the AMA Guides is objective documentation, and the author agrees that when physicians consider the disability evaluation of people, more issues than those relating to the percentage loss of function should be considered. More study of the relationships among impairment, disability, and quality of life in patients with RSD are required.

Mathematical simulation of error functions of decision-making at tolerance control of measuring techniques availability

Metrologiya ◽  
2020 ◽  
pp. 3-15
Author(s):  
Rustam Z. Khayrullin ◽  
Alexey S. Kornev ◽  
Andrew A. Kostoglotov ◽  
Sergey V. Lazarenko
Keyword(s):  
Measurement Error ◽  
Geometric Interpretation ◽  
Measuring Instruments ◽  
Measured Quantity ◽  
Metrological Examination ◽  
Technical Documentation ◽  
Error Functions ◽  
Measuring Techniques ◽  
Tolerance Control ◽  
Laws Of Distribution

Analytical and computer models of false failure and undetected failure (error functions) were developed with tolerance control of the parameters of the components of the measuring technique. A geometric interpretation of the error functions as two-dimensional surfaces is given, which depend on the tolerance on the controlled parameter and the measurement error. The developed models are applicable both to theoretical laws of distribution, and to arbitrary laws of distribution of the measured quantity and measurement error. The results can be used in the development of metrological support of measuring equipment, the verification of measuring instruments, the metrological examination of technical documentation and the certification of measurement methods.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

THE INFLUENCE OF TILLAGE SYSTEMS ON THE GROWTH, DEVELOPMENT AND YIELD OF LONG-FLAX

2020 ◽  
Author(s):  
V. Dumych ◽  
Keyword(s):  
Growth And Development ◽  
Field Experiments ◽  
Conservation Tillage ◽  
Mineral Fertilizers ◽  
Tillage Systems ◽  
Yield And Quality ◽  
Tillage System ◽  
The Difference ◽  
Flax Seeds

The purpose of research: to improve the technology of growing flax in the Western region of Ukraine on the basis of the introduction of systems for minimizing tillage, which will increase the yield of trusts and seeds. Research methods: field, laboratory, visual and comparative calculation method. Research results: Field experiments included the study of three tillage systems (traditional, canning and mulching) and determining their impact on growth and development and yields of trusts and flax seeds. The traditional tillage system included the following operations: plowing with a reversible plow to a depth of 27 cm, cultivation with simultaneous harrowing and pre-sowing tillage. The conservation system is based on deep shelfless loosening of the soil and provided for chiseling to a depth of 40 cm, disking to a depth of 15 cm, cultivation with simultaneous harrowing, pre-sowing tillage. During the implementation of the mulching system, disking to a depth of 15 cm, cultivation with simultaneous harrowing and pre-sowing tillage with a combined unit was carried out. Tillage implements and machines were used to perform tillage operations: disc harrow BDVP-3,6, reversible plow PON-5/4, chisel PCh-3, cultivator KPSP-4, pre-sowing tillage unit LK-4. The SZ-3,6 ASTPA grain seeder was used for sowing long flax of the Kamenyar variety. Simultaneously with the sowing of flax seeds, local application of mineral fertilizers (nitroammophoska 2 c/ha) was carried out. The application of conservation tillage allows to obtain the yield of flax trust at the level of 3,5 t/ha, which is 0,4 t/ha (12.9 %) more than from the area of traditional tillage and 0,7 t/ha (25 %) in comparison with mulching. In the area with canning treatment, the seed yield was the highest and amounted to 0,64 t/ha. The difference between this option and traditional and mulching tillage reaches 0,06 t/ha (10,3 %) and 0.10 t/ha (18.5 %), respectively. Conclusions. Preservation tillage, which is based on shelf-free tillage to a depth of 40 cm and disking to a depth of 15 cm has a positive effect on plant growth and development, yield and quality of flax.

Pengaruh ovaprim, aromatase inhibitor, dan hipofisa terhadap kualitas telur ikan Lele Dumbo (Clarias gariepinus)

2017 ◽  
Vol 5 (1) ◽  
Author(s):  
Erwin A. Aziz ◽  
Ockstan Kalesaran
Keyword(s):  
Survival Rate ◽  
Experimental Design ◽  
Aromatase Inhibitor ◽  
Fish Larvae ◽  
Clarias Gariepinus ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
The Difference ◽  
Hatching Eggs

This study aimed to determine the effect of ovaprim hormone, aromatase inhibitor and pituitary on the quality of the catfish eggs (Clarias gariepinus). Experimental Design used was Completely Randomized Design (CRD) with four treatments, each with three replications. Treatment A: ovaprim; treatment B: Aromatase inhibitors, treatment C: hypophysis and treatment D: Control. The results showed that the difference in treatment gave highly significant effect on fertilization and hatching eggs but no significant effect on the survival rate of larvae. Aromatase inhibitor hormone was the best because it provided highly significant effect on fertilization (92.66%), hatchability of eggs (95%), and surviva rate (81.33%) of fish larvae.   Keywords : Clarias gariepinus. Ovaprim, Aromatase Inhibitor, Hypophysis, egg, larvae

Multivariate micropollutants analysis in marine waters

1995 ◽  
Vol 32 (9-10) ◽  
pp. 341-348
Author(s):  
V. Librando ◽  
G. Magazzù ◽  
A. Puglisi
Keyword(s):  
Multivariate Data Analysis ◽  
Partial Least Squares Regression ◽  
Environmental Chemistry ◽  
Sampling Site ◽  
Principal Component ◽  
Least Squares Regression ◽  
Organic Micropollutants ◽  
Suspended Material ◽  
The Difference

The monitoring of water quality today provides a great quantity of data consisting of the values of the parameters measured as a function of time. In the marine environment, and especially in the suspended material, increasing importance is being given to the presence of organic micropollutants, particularly since some are known to be carcinogenic. As the number of measured parameters increases examining the data and their consequent interpretation becomes more difficult. To overcome such difficulties, numerous chemometric techniques have been introduced in environmental chemistry, such as Multivariate Data Analysis (MVDA), Principal Component Analysis (PCA) and Partial Least Squares Regression (PLSR). The use of the first technique in this work has been applied to the interpretation of the quality of Augusta bay, by measuring the concentration of numerous organic micropollutants, together with the classical water pollution parameters, in different sites and at different times. The MVDA has highlighted the difference between various sampling sites whose data were initially thought to be similar. Furthermore, it has allowed a choice of more significant parameters for future monitoring and more suitable sampling site locations.

Non-steady variations of SOD and phosphate release rate due to changes in the quality of the overlying water

2000 ◽  
Vol 42 (3-4) ◽  
pp. 265-272 ◽  
Author(s):  
T. Inoue ◽  
Y. Nakamura ◽  
Y. Adachi
Keyword(s):  
Release Rate ◽  
Oxygen Demand ◽  
Phosphate Concentration ◽  
Sediment Oxygen Demand ◽  
Biochemical Reactions ◽  
Overlying Water ◽  
Phosphate Release ◽  
Do Concentration ◽  
The Difference

A dynamic model, which predicts non-steady variations in the sediment oxygen demand (SOD) and phosphate release rate, has been designed. This theoretical model consists of three diffusion equations with biochemical reactions for dissolved oxygen (DO), phosphate and ferrous iron. According to this model, step changes in the DO concentration and flow velocity produce drastic changes in the SOD and phosphate release rate within 10 minutes. The vigorous response of the SOD and phosphate release rate is caused by the difference in the time scale of diffusion in the water boundary layer and that of the biochemical reactions in the sediment. Secondly, a negative phosphate transfer from water to sediment can even occur under aerobic conditions. This is caused by the decrease in phosphate concentration in the aerobic layer due to adsorption.

Quality-of-Life Measurement in Advanced Cancer: Assessing the Individual

1999 ◽  
Vol 17 (11) ◽  
pp. 3603-3611 ◽  
Author(s):  
Dympna Waldron ◽  
Ciaran A. O'Boyle ◽  
Michael Kearney ◽  
Michael Moriarty ◽  
Desmond Carney
Keyword(s):  
Quality Of Life ◽  
Advanced Cancer ◽  
Internal Validity ◽  
Semistructured Interview ◽  
Incurable Cancer ◽  
Life Measurement ◽  
The Difference ◽  
The Individual ◽  
Very High

PURPOSE: Despite the increasing importance of assessing quality of life (QoL) in patients with advanced cancer, relatively little is known about individual patient's perceptions of the issues contributing to their QoL. The Schedule for the Evaluation of Individual Quality of Life (SEIQoL) and the shorter SEIQoL–Direct Weighting (SEIQoL-DW) assess individualized QoL using a semistructured interview technique. Here we report findings from the first administration of the SEIQoL and SEIQoL-DW to patients with advanced incurable cancer. PATIENTS AND METHODS: QoL was assessed on a single occasion using the SEIQoL and SEIQoL-DW in 80 patients with advanced incurable cancer. RESULTS: All patients were able to complete the SEIQoL-DW, and 78% completed the SEIQoL. Of a possible score of 100, the median QoL global score was as follows: SEIQoL, 61 (range, 24 to 94); SEIQoL-DW, 60.5 (range, 6 to 95). Psychometric data for SEIQoL indicated very high levels of internal consistency (median r = .90) and internal validity (median R2 = 0.88). Patients' judgments of their QoL were unique to the individual. Family concerns were almost universally rated as more important than health, the difference being significant when measured using the SEIQoL-DW (P = .002). CONCLUSION: Patients with advanced incurable cancer were very good judges of their QoL, and many patients rated their QoL as good. Judgments were highly individual, with very high levels of consistency and validity. The primacy given to health in many QoL questionnaires may be questioned in this population. The implications of these findings are discussed with regard to clinical assessment and advance directives.

Quality of life in Hungarian polio survivors

2021 ◽  
Author(s):  
Erika Viktória Miszory ◽  
Melinda Járomi ◽  
Annamária Pakai
Keyword(s):  
Quality Of Life ◽  
Mental Health ◽  
Sample Selection ◽  
Cross Sectional Study ◽  
Two Dimensions ◽  
Cross Sectional ◽  
Emotional Role ◽  
The Difference ◽  
Polio Survivors

Abstract Aim The number of Hungarian polio patients can be estimated at approximately 3000. Polio infection is currently affecting people 56–65 years of age. The aim of the study was to reveal the quality of life of patients living with polio virus in Hungary. Subject and methods The quantitative cross-sectional study was conducted in January–April 2017 among polyomyelitis patients living in Hungary. In the non-random, targeted, expert sample selection, the target group was composed of patients infected with poliovirus (N = 268). We have excluded those who refused to sign the consent statement. Our data collection method was an SF-36 questionnaire. Using the IBM SPSS Statistics Version 22 program, descriptive and mathematical statistics (χ2-test) were calculated (p < 0.05). Results The mean age of the members of the examined population is 63.5 years; 68.1% were women and 31.90% were men. The majority of the respondents were infected by the polyovirus in 1956 (11.9%), 1957 (24.3%), and 1959 (19.5%). Polio patients, with the exception of two dimensions (mental health, social operation), on the scale of 100 do not reach the “average” quality of life (physical functioning 23 points, functional role 36 points, emotional role 47 points, body pain 48 points, general health 42 points, vitality 50 points, health change 31 points). Conclusion The quality of life of polio patients is far below the dimensions of physical function, while the difference in mental health compared to healthy people is minimal. It would be important to educate health professionals about the existing disease, to develop an effective rehabilitation method.

Sign in / Sign up

Export Citation Format

Share Document