AUTOMATED CRADLE WITH INCUBATOR FOR INFANTS

2020 ◽  
Vol 32 (05) ◽  
pp. 2050037
Author(s):  
N. Nasimsha ◽  
G. Manoj Kumar ◽  
T. Rajalakshmi ◽  
E. Rinzan Gafoor
Keyword(s):  
Body Temperature ◽  
Low Cost ◽  
Extreme Temperature ◽  
Premature Baby ◽  
Prototype Model ◽  
Cabin Temperature ◽  
Current Scenario ◽  
Time Parameters ◽  
And Control ◽  
Infant’S Growth

Cradle is a household appliance that carries the baby and aids in the comfortable sleep of the infants. In the current scenario, almost 80% of women are working. They find it tough to manage both the household work and office job. Hence, there is a real need for the design and development of a low-cost automatic oscillating cradle that could monitor the real-time parameters of the infants. Unlike adults, infants cannot regulate their body temperature easily. Children are more prone to develop hypothermia and hyperthermia under extreme temperature conditions. An incubator could maintain appropriate conditions for the infant. This study is focused on developing a low-cost automated baby cradle with an incubator that analyzes baby cry and oscillates automatically. The developed system can also maintain suitable environmental conditions for the infant’s growth. If in case attention of a premature baby were to be sought on a regular basis, the developed system can monitor the temperature and heartbeat along with the cabin temperature and humidity. The developed system has an inbuilt alarm that rings when there is an abnormality in the infant’s heartbeat and body temperature. The alarm also indicates when the mattress is wet. A Bluetooth-based mobile application is also designed which could monitor and control the cradle. The proposed prototype model can be employed both in hospitals and at home.

Identificación de polaridad de los devanados en un motor trifásico de 6 terminales

2019 ◽  
pp. 13-19
Author(s):  
José Luis Viramontes-Reyna ◽  
Josafat Moreno-Silva ◽  
José Guadalupe Montelongo-Sierra ◽  
Erasmo Velazquez-Leyva
Keyword(s):  
Low Cost ◽  
Voltage Reference ◽  
Three Phase ◽  
Voltage Phase ◽  
The Law ◽  
And Control

This document presents the results obtained from the application of the law of Lens to correctly identify the polarity of the windings in a three-phase motor with 6 exposed terminals, when the corresponding labeling is not in any situation; Prior to identifying the polarity, it should be considered to have the pairs of the three windings located. For the polarity, it is proposed to feed with a voltage of 12 Vrms to one of the windings, which are identified randomly as W1 and W2, where W1 is connected to the voltage phase of 12 Vrms of the signal and W2 to the voltage reference to 0V; by means of voltage induction and considering the law of Lens, the remaining 4 terminals can be identified and labeled as V1, V2, U1 and U2. For this process a microcontroller and control elements with low cost are used.

Restoring and Controlling the Water Pollution of Endangered River in Bangladesh: A Case Study in Pabna City

2020 ◽  
Vol 3 (2) ◽  
pp. 68-81
Author(s):  
Abu Sadath ◽  
Farhana Afroz ◽  
Hosne Ara ◽  
Abdulla-Al Kafy
Keyword(s):  
Water Pollution ◽  
Local Community ◽  
River Flow ◽  
Low Cost ◽  
Design Approach ◽  
Government Officials ◽  
Conservation Plan ◽  
Policy Measures ◽  
And Control ◽  
Riverfront Development

Rivers are the lifeline of Bangladesh economy and serve as the source of water supply, fisheries, irrigation for agriculture, low-cost transport, generate electricity and conserve biodiversity. The Ichamati River situated in Pabna, Bangladesh is also a blessing for the city. However, recently, due to the irregular and unplanned activities adjacent to the riverside, the life, flow and water quality of the river is in a vulnerable condition. This study aims to identify the present status of the Ichamati River and provide an effective design approach and policy measures in restoring the river flow and control water pollution. The data was collected from the questioner surveys, key informant interviews and focus group discussions. Results suggest that several factors such as the construction of an illegal settlement, unplanned waste dumping, disposal of fiscal sludge through sewerage connection, lack of awareness among people regarding the importance of river biodiversity and absence of riverfront development and conservation plan are responsible for water pollution, inconsistent water flow and damaging the life cycle of Ichamati river. The design approach and policy measures were developed based on the perceptions of local community people, experts and government officials. The suggested policy measures will help to restore the flow of the river and reduce the water pollution, and the design approach will ensure the economic benefit of the riverfront development in future.

scholarly journals Information and information resources in COVID-19: Awareness, control, and prevention

2021 ◽  
pp. 096100062110165
Author(s):  
Mohammadhiwa Abdekhoda ◽  
Fatemeh Ranjbaran ◽  
Asghar Sattari
Keyword(s):  
Low Cost ◽  
Information Resources ◽  
Age And Gender ◽  
Use Of Resources ◽  
Strategic Approach ◽  
Wide Range ◽  
Data Collection Instrument ◽  
Control And Prevention ◽  
And Gender ◽  
And Control

This study was conducted with the aim of evaluating the role of information and information resources in the awareness, control, and prevention of COVID-19. This study was a descriptive-analytical survey in which 450 participants were selected for the study. The data collection instrument was a researcher-made questionnaire. Descriptive and inferential statistics were used to analyze the data through SPSS. The findings show that a wide range of mass media has become well known as information resources for COVID-19. Other findings indicate a significant statistical difference in the rate of using information resources during COVID-19 based on age and gender; however, this difference is not significant regarding the reliability of information resources with regard to age and gender. Health information has an undisputable role in the prevention and control of pandemic diseases such as COVID-19. Providing accurate, reliable, and evidence-based information in a timely manner for the use of resources and information channels related to COVID-19 can be a fast and low-cost strategic approach in confronting this disease.

scholarly journals Designing of an Advanced Compression Bioreactor with an Implementation of a Low-Cost Controlling System Connected to a Mobile Application

Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 915
Author(s):  
Gözde Dursun ◽  
Muhammad Umer ◽  
Bernd Markert ◽  
Marcus Stoffel
Keyword(s):  
Mobile Application ◽  
Low Cost ◽  
Experimental Information ◽  
Raspberry Pi ◽  
Tissue Constructs ◽  
Cost Controlling ◽  
Controlling System ◽  
And Control ◽  
Tissue Models

(1) Background: Bioreactors mimic the natural environment of cells and tissues by providing a controlled micro-environment. However, their design is often expensive and complex. Herein, we have introduced the development of a low-cost compression bioreactor which enables the application of different mechanical stimulation regimes to in vitro tissue models and provides the information of applied stress and strain in real-time. (2) Methods: The compression bioreactor is designed using a mini-computer called Raspberry Pi, which is programmed to apply compressive deformation at various strains and frequencies, as well as to measure the force applied to the tissue constructs. Besides this, we have developed a mobile application connected to the bioreactor software to monitor, command, and control experiments via mobile devices. (3) Results: Cell viability results indicate that the newly designed compression bioreactor supports cell cultivation in a sterile environment without any contamination. The developed bioreactor software plots the experimental data of dynamic mechanical loading in a long-term manner, as well as stores them for further data processing. Following in vitro uniaxial compression conditioning of 3D in vitro cartilage models, chondrocyte cell migration was altered positively compared to static cultures. (4) Conclusion: The developed compression bioreactor can support the in vitro tissue model cultivation and monitor the experimental information with a low-cost controlling system and via mobile application. The highly customizable mold inside the cultivation chamber is a significant approach to solve the limited customization capability of the traditional bioreactors. Most importantly, the compression bioreactor prevents operator- and system-dependent variability between experiments by enabling a dynamic culture in a large volume for multiple numbers of in vitro tissue constructs.

scholarly journals Multi-Blockchain-Based IoT Data Processing Techniques to Ensure the Integrity of IoT Data in AIoT Edge Computing Environments

Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3515
Author(s):  
Sung-Ho Sim ◽  
Yoon-Su Jeong
Keyword(s):  
Low Cost ◽  
Third Party ◽  
Monitoring And Control ◽  
Constant Size ◽  
Computing Environments ◽  
Iot Devices ◽  
Cloud Servers ◽  
The Cost ◽  
Processing Techniques ◽  
And Control

As the development of IoT technologies has progressed rapidly recently, most IoT data are focused on monitoring and control to process IoT data, but the cost of collecting and linking various IoT data increases, requiring the ability to proactively integrate and analyze collected IoT data so that cloud servers (data centers) can process smartly. In this paper, we propose a blockchain-based IoT big data integrity verification technique to ensure the safety of the Third Party Auditor (TPA), which has a role in auditing the integrity of AIoT data. The proposed technique aims to minimize IoT information loss by multiple blockchain groupings of information and signature keys from IoT devices. The proposed technique allows IoT information to be effectively guaranteed the integrity of AIoT data by linking hash values designated as arbitrary, constant-size blocks with previous blocks in hierarchical chains. The proposed technique performs synchronization using location information between the central server and IoT devices to manage the cost of the integrity of IoT information at low cost. In order to easily control a large number of locations of IoT devices, we perform cross-distributed and blockchain linkage processing under constant rules to improve the load and throughput generated by IoT devices.

scholarly journals Induction of Neural Plasticity Using a Low-Cost Open Source Brain-Computer Interface and a 3D-Printed Wrist Exoskeleton

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 572
Author(s):  
Mads Jochumsen ◽  
Taha Al Muhammadee Janjua ◽  
Juan Carlos Arceo ◽  
Jimmy Lauber ◽  
Emilie Simoneau Buessinger ◽  
...  
Keyword(s):  
Open Source ◽  
Neural Plasticity ◽  
Motor Evoked Potentials ◽  
Low Cost ◽  
True Positive Rate ◽  
Positive Rate ◽  
3D Printed ◽  
Major Factors ◽  
And Control ◽  
Bci System

Brain-computer interfaces (BCIs) have been proven to be useful for stroke rehabilitation, but there are a number of factors that impede the use of this technology in rehabilitation clinics and in home-use, the major factors including the usability and costs of the BCI system. The aims of this study were to develop a cheap 3D-printed wrist exoskeleton that can be controlled by a cheap open source BCI (OpenViBE), and to determine if training with such a setup could induce neural plasticity. Eleven healthy volunteers imagined wrist extensions, which were detected from single-trial electroencephalography (EEG), and in response to this, the wrist exoskeleton replicated the intended movement. Motor-evoked potentials (MEPs) elicited using transcranial magnetic stimulation were measured before, immediately after, and 30 min after BCI training with the exoskeleton. The BCI system had a true positive rate of 86 ± 12% with 1.20 ± 0.57 false detections per minute. Compared to the measurement before the BCI training, the MEPs increased by 35 ± 60% immediately after and 67 ± 60% 30 min after the BCI training. There was no association between the BCI performance and the induction of plasticity. In conclusion, it is possible to detect imaginary movements using an open-source BCI setup and control a cheap 3D-printed exoskeleton that when combined with the BCI can induce neural plasticity. These findings may promote the availability of BCI technology for rehabilitation clinics and home-use. However, the usability must be improved, and further tests are needed with stroke patients.

scholarly journals Proanthocyanidins against Oxidative Stress: From Molecular Mechanisms to Clinical Applications

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Lingyu Yang ◽  
Dehai Xian ◽  
Xia Xiong ◽  
Rui Lai ◽  
Jing Song ◽  
...  
Keyword(s):  
Oxidative Stress ◽  
Signaling Pathways ◽  
Molecular Mechanisms ◽  
Metabolic Diseases ◽  
Low Cost ◽  
Natural Agents ◽  
Molecular Damage ◽  
And Control

Proanthocyanidins (PCs) are naturally occurring polyphenolic compounds abundant in many vegetables, plant skins (rind/bark), seeds, flowers, fruits, and nuts. Numerousin vitroandin vivostudies have demonstrated myriad effects potentially beneficial to human health, such as antioxidation, anti-inflammation, immunomodulation, DNA repair, and antitumor activity. Accumulation of prooxidants such as reactive oxygen species (ROS) exceeding cellular antioxidant capacity results in oxidative stress (OS), which can damage macromolecules (DNA, lipids, and proteins), organelles (membranes and mitochondria), and whole tissues. OS is implicated in the pathogenesis and exacerbation of many cardiovascular, neurodegenerative, dermatological, and metabolic diseases, both through direct molecular damage and secondary activation of stress-associated signaling pathways. PCs are promising natural agents to safely prevent acute damage and control chronic diseases at relatively low cost. In this review, we summarize the molecules and signaling pathways involved in OS and the corresponding therapeutic mechanisms of PCs.

Rotordynamic Performance of Flexure Pivot Hydrostatic Gas Bearings for Oil-Free Turbomachinery

2007 ◽  
Vol 129 (4) ◽  
pp. 1020-1027 ◽  
Author(s):  
Xuehua Zhu ◽  
Luis San Andrés
Keyword(s):  
High Speed ◽  
Low Cost ◽  
Damping Ratio ◽  
Extreme Temperature ◽  
Gas Bearings ◽  
Speed Increase ◽  
Feed Pressure ◽  
Motor Test ◽  
Direct Stiffness ◽  
Commercial Applications

Micro-turbomachinery demands gas bearings to ensure compactness, light weight, and extreme temperature operation. Gas bearings with large stiffness and damping, and preferably of low cost, will enable successful commercial applications. Presently, tests conducted on a small rotor supported on flexure pivot hydrostatic pad gas bearings (FPTPBs) demonstrate stable rotordynamic responses up to 100,000rpm (limit of the drive motor). Test rotor responses show the feed pressure raises the system critical speed (increase in bearing direct stiffness) while the viscous damping ratio decreases. Predictions correlate favorably with experimentally identified (synchronous) direct stiffness bearing force coefficients. Identified experimental gas bearing synchronous damping coefficients are 50% or less of the predicted magnitudes, though remaining relatively constant as the rotor speed increases. Tests without feed pressure show the rotor becomes unstable at ∼81krpm with a whirl frequency ratio of 20%. FPTPBs are mechanically complex and more expensive than cylindrical plain bearings. However, their enhanced stability characteristics and predictable rotordynamic performance makes them desirable for the envisioned oil-free applications in high speed micro-turbomachinery.

Removal of Phosphate Species from Solution by Adsorption onto Red and Grey Ceramic Clay Used as Adsorbent

2014 ◽  
Vol 675-677 ◽  
pp. 434-439
Author(s):  
Yi Liang Yao ◽  
Chang Yu Lu ◽  
Wie Sheng Guan ◽  
Hai Gang Gou ◽  
Wei Huang
Keyword(s):  
Waste Water ◽  
Low Cost ◽  
Phosphate Removal ◽  
Liquid Ratio ◽  
Phosphate Species ◽  
Water Problems ◽  
And Control ◽  
Water Eutrophication ◽  
Clay Materials ◽  
Ceramic Clay

Waste water is becoming more and more around us and phosphates exit everywhere in waste water. Eutrophication, the most common phenomenon caused by phosphate, can lead to water problems. Therefore, searching suitable materials to remove and control phosphate in waste water is of great significance. In this reach project, the method of adsorption was chosen to remove phosphate and two kinds of ceramic clay materials which were low cost and easily available as adsorbent for adsorption were used for phosphate removal. According to the removal efficiency of phosphate removal, temperature, solid to liquid ratio, the original concentration of phosphate and experiment time were studied in the experiments.

Sign in / Sign up

Export Citation Format

Share Document