Industrial Test on Shearing Force of Rolling Shear

2010 ◽  
Vol 145 ◽  
pp. 462-466
Author(s):  
Li Feng Ma ◽  
Jian Mei Wang ◽  
Qing Xue Huang
Keyword(s):  
Shear Force ◽  
Optimization Design ◽  
Large Scale ◽  
Steel Plate ◽  
Industrial Test ◽  
Test Results ◽  
Shearing Force ◽  
Rolling Shear ◽  
Structure Strength ◽  
Selection Of

The accuracy of the max shear force of rolling shear is of vital importance to the proper selection of motor power and the optimization design of structure strength. The test on shear force during the shearing process of stainless steel was done on 3000 mm cut-to-length rolling shear of some Large-scale Iron & Steel Co., Ltd. The test results have shown that the weight of upper-blade carrier can bring about the fluctuation of measuring signals of shearing force at the start and end instants. Meanwhile, the shear force during the shearing process will gradually increase with the increment relative cut-in depth, and the process from the bite-in of upper blade into steel plate to the fracture of steel plate is very short, thus the link force on the side of firstly-fallen-off blade will initially increase and then will decrease by large increment amplitude. The shear force at the cut-in stage will dramatically increase. During the cut-in stage, the shear force is basically a constant due to the constant shear angle. In summary, the above test results have important referential value to the calculation of shear force and the design of structure strength.

Research on Asymmetric and Negative Offset Mechanism of Large-Scale Steel Plate Rolling Shear

2008 ◽  
Vol 375-376 ◽  
pp. 700-704
Author(s):  
Yu Gui Li ◽  
Li Feng Ma ◽  
Qing Xue Huang ◽  
Si Qin Pang
Keyword(s):  
Shear Force ◽  
Large Scale ◽  
Steel Plate ◽  
Effective Means ◽  
Structural Features ◽  
Motion Path ◽  
Back Wall ◽  
Rolling Shear ◽  
Pure Rolling ◽  
Blade Clearance

According to revised Cailikefu’s rolling shear force formula, motion path equation of spatial seven-bar path is built, and mechanical model, with such new structural features as asymmetric and negative offset, is thus successfully established for 2800 mm heavy shear of some Iron&Steel Company. Shear force and bar force of steel plate, before and after adoption of asymmetric and negative offset structure, are analyzed, as well as horizontal force component of mechanism that influences pure rolling shear and back-wall push force that keeps blade clearance. The discovery is that back-wall push force could be kept large enough at rolling start-up (i.e. the time that the maximum rolling shear produces), meanwhile, back-wall push force is the most approximate to side forces with adoption of 60mm~100mm offset. Theoretical results and on-site shear quality both indicate that new structural features such as asymmetric and negative offset plays an important role in ensuring pure rolling shear and keeping blade clearance constant, which provide an effective means to improve quality of steel plate.

Selection of Anticorrosion Adhesive Layer for Steel Deck

2013 ◽  
Vol 361-363 ◽  
pp. 1137-1143
Author(s):  
Chun Xia Yan ◽  
Zhi Guo Li ◽  
Bo Su
Keyword(s):  
Steel Plate ◽  
Adhesive Layer ◽  
Adhesive System ◽  
Adhesive Force ◽  
Test Results ◽  
Different Temperatures ◽  
Adhesion Performance ◽  
Steel Deck ◽  
Selection Of ◽  
Better Than

In order to solve the problems of the pavement delamination or slip caused by the failures of waterproof adhesive layer or anti-corrosion coating, the epoxy zinc-rich paint, the epoxy clear water paint and epoxy asphalt adhesive material with good performance was selected for the roughness-adhesive force test, tensile test under different temperatures and corrosion resistance test. The optimal anti-corrosion layer and adhesive layer were selected to increase the service life of the steel deck pavement. The test results show that: When the steel roughness is 60μm, the anti-corrosion material has the highest adhesive strength with the steel plate. Both the epoxy zinc-rich paint and the epoxy water paint have high adhesive strengths with the steel plate at room temperature. But at low temperature, the adhesion performance of the epoxy water paint is significantly better than that of the epoxy zinc-rich paint. At 70 °C, the adhesive strengths of both the epoxy water paint and epoxy zinc-rich paint adhesive system greatly decrease. The destruction morphology shows the opening of the adhesive layer. The specialized anti-corrosion coating must be brushed on the steel deck.

Platelet Anti-Aggregating Activity and Tolerance of Clopidogrel in Atherosclerotic Patients

1996 ◽  
Vol 76 (06) ◽  
pp. 0939-0943 ◽  
Author(s):  
B Boneu ◽  
G Destelle ◽  
Keyword(s):  
Platelet Aggregation ◽  
Large Scale ◽  
Bleeding Time ◽  
Antithrombotic Activity ◽  
Ambulatory Patients ◽  
Patients At Risk ◽  
Set Up ◽  
Ischemic Events ◽  
Large Scale Clinical Trial ◽  
Selection Of

SummaryThe anti-aggregating activity of five rising doses of clopidogrel has been compared to that of ticlopidine in atherosclerotic patients. The aim of this study was to determine the dose of clopidogrel which should be tested in a large scale clinical trial of secondary prevention of ischemic events in patients suffering from vascular manifestations of atherosclerosis [CAPRIE (Clopidogrel vs Aspirin in Patients at Risk of Ischemic Events) trial]. A multicenter study involving 9 haematological laboratories and 29 clinical centers was set up. One hundred and fifty ambulatory patients were randomized into one of the seven following groups: clopidogrel at doses of 10, 25, 50,75 or 100 mg OD, ticlopidine 250 mg BID or placebo. ADP and collagen-induced platelet aggregation tests were performed before starting treatment and after 7 and 28 days. Bleeding time was performed on days 0 and 28. Patients were seen on days 0, 7 and 28 to check the clinical and biological tolerability of the treatment. Clopidogrel exerted a dose-related inhibition of ADP-induced platelet aggregation and bleeding time prolongation. In the presence of ADP (5 \lM) this inhibition ranged between 29% and 44% in comparison to pretreatment values. The bleeding times were prolonged by 1.5 to 1.7 times. These effects were non significantly different from those produced by ticlopidine. The clinical tolerability was good or fair in 97.5% of the patients. No haematological adverse events were recorded. These results allowed the selection of 75 mg once a day to evaluate and compare the antithrombotic activity of clopidogrel to that of aspirin in the CAPRIE trial.

Implementasi Voip Server Berbasis IPV6 Dengan Raspberry PI

2019 ◽  
Vol 9 (01) ◽  
pp. 47-54
Author(s):  
Rabbai San Arif ◽  
Yuli Fitrisia ◽  
Agus Urip Ari Wibowo
Keyword(s):  
Internet Protocol ◽  
Wireless Transmission ◽  
Raspberry Pi ◽  
Test Results ◽  
Average Delay ◽  
Ipv6 Network ◽  
Ip Network ◽  
Selection Of ◽  
Better Than

Voice over Internet Protocol (VoIP) is a telecommunications technology that is able to pass the communication service in Internet Protocol networks so as to allow communicating between users in an IP network. However VoIP technology still has weakness in the Quality of Service (QoS). VOPI weaknesses is affected by the selection of the physical servers used. In this research, VoIP is configured on Linux operating system with Asterisk as VoIP application server and integrated on a Raspberry Pi by using wired and wireless network as the transmission medium. Because of depletion of IPv4 capacity that can be used on the network, it needs to be applied to VoIP system using the IPv6 network protocol with supports devices. The test results by using a wired transmission medium that has obtained are the average delay is 117.851 ms, jitter is 5.796 ms, packet loss is 0.38%, throughput is 962.861 kbps, 8.33% of CPU usage and 59.33% of memory usage. The analysis shows that the wired transmission media is better than the wireless transmission media and wireless-wired.

PENGEMBANGAN BAHAN AJAR IPA SMP PADA TEMA ENERGI DALAM TUBUH MENGGUNAKAN METODE 4STMD

EDUSAINS ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 166-175
Author(s):  
Gia Juniar Nur Wahidah ◽  
Sjaeful Anwar
Keyword(s):  
Concept Maps ◽  
The Body ◽  
Instructional Materials ◽  
Teaching Material ◽  
Test Results ◽  
Teaching Materials ◽  
Eligibility Criteria ◽  
Material Development ◽  
Selection Step ◽  
Selection Of

Abstract This research aims to produce science teaching materials in junior level with Energy in The Body as the theme using Four Steps Teaching Material Development  (4STMD). The material is presented in an integrated way so that students can  think holistically and contextually. The method used in this study is Research and Development. In this R&D methods is used 4STMD. There are four steps done on the development of teaching materials, the selection step, structuring step, characterization, and didactic reduction. Selection step includes the selection of indicators in accordance with the demands of the curriculum which is then developed with the selection of concepts and values that are integrated with the concept of science. Structuring step includes make macro structures, concept maps, and multiple representations. Characterization's step includes preparation instruments, then  trial to students to identify difficult concepts. The last, didactic reduction was done by neglect and the annotations in the form of sketches.The test results readability aspect instructional materials lead to the conclusion that by determining the main idea, the legibility of teaching materials reached 67%, with moderate readability criteria. Test results of feasibility aspects based on the results of questionnaires to the 11 teachers lead to the conclusion that the overall, level of eligibility teaching materials reached 91% with the eligibility criteria well. Keywords: teaching materials; energy; 4STMD Abstrak Penelitian ini bertujuan untuk menghasilkan bahan ajar IPA SMP pada tema Energi dalam Tubuh menggunakan metode Four Steps Teaching Material Development (4STMD). Materi disajikan secara terpadu sehingga memacu siswa untuk berpikir secara holistik dan kontekstual. Metode penelitian yang digunakan pada penelitian ini adalah metode penelitian dan pengembangan. Dalam penelitian dan pengembangan yang ini, digunakan metode Four Steps Teaching Material Development (4STMD). Terdapat empat tahap yang dilakukan pada pengembangan bahan ajar, yakni tahap seleksi, strukturisasi, karakterisasi, dan reduksi didaktik. Tahap seleksi meliputi pemilihan indikator yang sesuai dengan tuntutan kurikulum yang kemudian dikembangkan dengan pemilihan konsep dan nilai yang diintegrasikan dengan konsep IPA. Tahap strukturisasi meliputi pembuatan struktur makro, peta konsep, dan multipel representasi dari materi. Tahap karakterisasi meliputi penyusunan instrumen karakterisasi, kemudian uji coba kepada siswa untuk mengidentifikasi konsep sulit. Tahap terakhir, yaitu reduksi didaktik konsep terhadap konsep sulit. Reduksi didaktik yang dilakukan berupa pengabaian dan penggunaan penjelasan berupa sketsa. Hasil uji aspek keterbacaan bahan ajar menghasilkan kesimpulan bahwa berdasarkan penentuan ide pokok, keterbacaan bahan ajar mencapai 67%, dengan kriteria keterbacaan tinggi. Hasil uji aspek kelayakan berdasarkan hasil angket terhadap 11 orang guru menghasilkan kesimpulan bahwa secara keseluruhan tingkat kelayakan bahan ajar mencapai 91% dengan kriteria kelayakan baik sekali. Kata Kunci: bahan ajar; energi; 4STMD  Permalink/DOI: http://dx.doi.org/10.15408/es.v8i2.2039  

HUBUNGAN UMUR DAN PARITAS DENGAN PEMILIHAN ALAT KONTRASEPSI METODE OPERASI WANITA (MOW) DI POLIKLINIK KEBIDANAN RS BHAYANGKARA PALEMBANG TAHUN 2012

2019 ◽  
Vol 3 (2) ◽  
Author(s):  
Y. Widyastuti Y. Widyastuti
Keyword(s):  
Family Planning ◽  
Medical Records ◽  
Test Results ◽  
Family Planning Services ◽  
Chi Square ◽  
Cross Sectional ◽  
Planning Methods ◽  
Chi Square Test ◽  
Family Planning Methods ◽  
Selection Of

  ABSTRACT [In advanced countries the number of permanent contraception option ( kontap ) approximately 10 % of all national family planning methods , while in Indonesia reached approximately 5.7 % . Based on data obtained from medical records Bhayangkara Hospital Palembang in 2010 the number of achievement when seen from the percentage of contraceptive use is only 9.10 % The purpose of this study is known age and parity relationship with the selection of contraceptive methods Surgery Women ( MOW ) in Palembang RS.Bhayangkara obstetrics clinic in 2012 . This study uses the analytic survey with cross sectional approach . The population in this study were women who become new acceptors were recorded in medical records at the hospital . Palembang Bhayangkara Hospitals January 1, 2012 to December 31 in 2012 . The sample in this study is part of a whole number of new acceptors ( either using contraception methods MOW and other family planning methods ) were registered in the hospital . Palembang Police Hospitals of January 1, 2012 to December 31 years of data 2012.Analisa univariate and bivariate statistical Chi - Square test with significance level α = 0.05 . The results showed there were 80 respondents ( 46.3 % ) who became MOW contraceptive acceptors , acceptors who have old age by 45 respondents ( 56.3 % ) and who has a young age by 35 respondents ( 43.8 % ) . acceptors which have high parity were 44 respondents ( 55 % ) who had low parity and a total of 36 respondents ( 45 % ) . From the results of Chi-square test value obtained ρ = 0.00 is smaller than α = 0.05 . There is a significant correlation between age and the selection of MOW Chi square test results obtained ρ value = 0.00 and there was a significant association between parity with the election MOW Chi square test results obtained ρ value = 0 , . From these results , it is expected to power health, especially family planning services at the hospital . Palembang Police Hospitals in order to improve the quality of family planning services in an effective, efficient , and safe are considered particularly suitable for users of contraception OperatingMethodWomen(MOW).                                      ABSTRAK Di negara sudah maju jumlah pilihan kontrasepsi mantap (kontap) sekitar 10% dari semua metode KB nasional, sedangkan di Indonesia baru mencapai sekitar 5,7 %. Berdasarkan data yang diperoleh dari Rekam medik  Rumah Sakit Bhayangkara Palembang tahun 2010 Jumlah pencapain tersebut jika dilihat dari persentasi penggunaan kontrasepsi MOW hanya  9,10% Tujuan penelitian ini adalah diketahuinya hubungan umur dan paritas dengan pemilihan alat kontrasepsi Metode Operasi Wanita (MOW) di poliklinik kebidanan RS.Bhayangkara Palembang Tahun 2012. Penelitian ini menggunakan metode survey analitik dengan pendekatan cross sectional. Populasi dalam penelitian ini adalah wanita yang menjadi akseptor KB Baru yang tercatat di rekam medik  di RS. Bhayangkara Palembang tanggal 1 januari 2012 sampai dengan 31 Desember  tahun 2012. Sampel dalam penelitian ini adalah sebagian dari seluruh jumlah akseptor KB Baru (baik yang menggunakan alat kontrasepsi Metode MOW maupun Metode KB lain) yang teregister di RS. Bhayangkara Palembang dari tanggal 1 januari 2012 sampai dengan 31 Desember  tahun 2012.Analisa data dilakukan secara univariat dan bivariat dengan uji statistik Chi-Square dengan tingkat kemaknaan α = 0,05. Hasil penelitian menunjukkan dari 80 responden terdapat (46,3%) yang menjadi akseptor kontrasepsi MOW, akseptor yang memiliki umur tua sebanyak 45 responden (56,3%) dan yang memiliki  umur muda sebanyak 35 responden (43,8%). akseptor yang memiliki paritas tinggi sebanyak 44 responden  (55%) dan yang memiliki  paritas rendah sebanyak 36 responden (45%). Dari hasil uji Chi square didapatkan ρ value = 0,00 lebih kecil dari α = 0,05. Ada hubungan yang bermakna antara umur dengan pemilihan MOW dari hasil uji Chi square didapatkan ρ value = 0,00 dan ada hubungan yang bermakna antara paritas dengan pemilihan MOW hasil uji Chi square didapatkan ρ value = 0,.Dari hasil penelitian ini, diharapkan kepada tenaga kesehatan khususnya pelayanan KB  di RS. Bhayangkara Palembang  agar dapat meningkatkan kualitas pelayanan KB secara efektif, efisien, dan aman yang dianggap cocok bagi penggunanya khususnya mengenai kontrasepsi Metode Operasi Wanita (MOW).    

scholarly journals Methodology for Determining the Location of River Ports on a Modernized Waterway Based on Non-Cost Criteria: A Case Study of the Odra River Waterway

2021 ◽  
Vol 13 (6) ◽  
pp. 3571
Author(s):  
Bogusz Wiśnicki ◽  
Dorota Dybkowska-Stefek ◽  
Justyna Relisko-Rybak ◽  
Łukasz Kolanda
Keyword(s):  
Large Scale ◽  
Multicriteria Decision Making ◽  
Research Process ◽  
Optimal Selection ◽  
Investment Projects ◽  
Odra River ◽  
Research Problems ◽  
Selection Of ◽  
Construction Works

The paper responds to research problems related to the implementation of large-scale investment projects in waterways in Europe. As part of design and construction works, it is necessary to indicate river ports that play a major role within the European transport network as intermodal nodes. This entails a number of challenges, the cardinal one being the optimal selection of port locations, taking into account the new transport, economic, and geopolitical situation that will be brought about by modernized waterways. The aim of the paper was to present an original methodology for determining port locations for modernized waterways based on non-cost criteria, as an extended multicriteria decision-making method (MCDM) and employing GIS (Geographic Information System)-based tools for spatial analysis. The methodology was designed to be applicable to the varying conditions of a river’s hydroengineering structures (free-flowing river, canalized river, and canals) and adjustable to the requirements posed by intermodal supply chains. The method was applied to study the Odra River Waterway, which allowed the formulation of recommendations regarding the application of the method in the case of different river sections at every stage of the research process.

scholarly journals BonMOLière: Small-Sized Libraries of Readily Purchasable Compounds, Optimized to Produce Genuine Hits in Biological Screens across the Protein Space

2021 ◽  
Vol 22 (15) ◽  
pp. 7773
Author(s):  
Neann Mathai ◽  
Conrad Stork ◽  
Johannes Kirchmair
Keyword(s):  
Large Scale ◽  
Computational Approach ◽  
Large Sets ◽  
Compound Libraries ◽  
Wide Range ◽  
Protein Space ◽  
High Chance ◽  
Large Scale Screening ◽  
Early Drug ◽  
Selection Of

Experimental screening of large sets of compounds against macromolecular targets is a key strategy to identify novel bioactivities. However, large-scale screening requires substantial experimental resources and is time-consuming and challenging. Therefore, small to medium-sized compound libraries with a high chance of producing genuine hits on an arbitrary protein of interest would be of great value to fields related to early drug discovery, in particular biochemical and cell research. Here, we present a computational approach that incorporates drug-likeness, predicted bioactivities, biological space coverage, and target novelty, to generate optimized compound libraries with maximized chances of producing genuine hits for a wide range of proteins. The computational approach evaluates drug-likeness with a set of established rules, predicts bioactivities with a validated, similarity-based approach, and optimizes the composition of small sets of compounds towards maximum target coverage and novelty. We found that, in comparison to the random selection of compounds for a library, our approach generates substantially improved compound sets. Quantified as the “fitness” of compound libraries, the calculated improvements ranged from +60% (for a library of 15,000 compounds) to +184% (for a library of 1000 compounds). The best of the optimized compound libraries prepared in this work are available for download as a dataset bundle (“BonMOLière”).

scholarly journals Car braking effectiveness after adaptation for drivers with motor dysfunctions

2021 ◽  
Vol 11 (1) ◽  
pp. 617-623
Author(s):  
Adam Sowiński ◽  
Tomasz Szczepański ◽  
Grzegorz Koralewski
Keyword(s):  
Efficiency Index ◽  
Mathematical Function ◽  
Test Results ◽  
Braking Performance ◽  
Braking System ◽  
System Adaptation ◽  
Parametric Description ◽  
Limited Power ◽  
Braking Force ◽  
Selection Of

Abstract This article presents the results of measurements of the braking efficiency of vehicles adapted to be operated by drivers with motor dysfunctions. In such cars, the braking system is extended with an adaptive device that allows braking with the upper limb. This device applies pressure to the original brake in the car. The braking force and thus its efficiency depend on the mechanical ratio in the adapting device. In addition, braking performance depends on the sensitivity of the car’s original braking system and the maximum force that a disabled person can exert on the handbrake lever. Such a person may have limited power in the upper limbs. The force exerted by the driver can also be influenced by the position of the driver’s seat in relation to the handbrake lever. This article describes the research aimed at understanding the influence of the above-mentioned factors on the car braking performance. As a part of the analysis of the test results, a mathematical function was proposed that allows a parametric description of the braking efficiency index on the basis of data on the braking system, adaptation device, driver’s motor limitations, and the position of the driver’s seat. The information presented in this article can be used for the preliminary selection of adaptive devices to the needs of a given driver with a disability and to the vehicle construction.

What Every Neuropathologist Needs to Know: Practical Aspects and Pitfalls in Molecular Diagnosis of Brain Tumors

2021 ◽  
Author(s):  
J Stephen Nix ◽  
Cristiane M Ida
Keyword(s):  
Brain Tumors ◽  
Molecular Diagnosis ◽  
Genetic Alterations ◽  
Genetic Alteration ◽  
Molecular Testing ◽  
Test Results ◽  
Molecular Test ◽  
Molecular Tests ◽  
Clinically Significant ◽  
Selection Of

Abstract Molecular testing has become part of the routine diagnostic workup of brain tumors after the implementation of integrated histomolecular diagnoses in the 2016 WHO classification update. It is important for every neuropathologist to be aware of practical preanalytical, analytical, and postanalytical factors that impact the performance and interpretation of molecular tests. Prior to testing, optimizing tumor purity and tumor amount increases the ability of the molecular test to detect the genetic alteration of interest. Recognizing basic molecular testing platform analytical characteristics allows selection of the optimal platform for each clinicopathological scenario. Finally, postanalytical considerations to properly interpret molecular test results include understanding the clinical significance of the detected genetic alteration, recognizing that detected clinically significant genetic alterations are occasionally germline constitutional rather than somatic tumor-specific, and being cognizant that recommended and commonly used genetic nomenclature may differ. Potential pitfalls in brain tumor molecular diagnosis are also discussed.

Sign in / Sign up

Export Citation Format

Share Document