Performance of Nano-Silica Insulation Material Enhanced by High Humidity-Reinforcement Method

2016 ◽  
Vol 697 ◽  
pp. 433-436
Author(s):  
Shi Chao Zhang ◽  
Yu Feng Chen ◽  
Wei Wu ◽  
Hao Ran Sun ◽  
Guang Hai Wang ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Raw Material ◽  
High Humidity ◽  
Insulation Material ◽  
Condensation Polymerization ◽  
Drying Process ◽  
Nano Silica ◽  
Insulation Materials ◽  
The One ◽  
Strength Improvement

In this paper, fumed nano-silica as the main raw material, nano-silica insulation materials were prepared by the dry processing. Research on humidity-reinforcement of nano-Silica insulation materials has been carried out and analyzed. When hygroscopicity of samples reach to 23%, the compressive strength 1.65MPa is at twice the one without high humidity-reinforcement, while the thermal conductivities are almost the same. Then, the action mechanism of high humidity-reinforcement method was analyzed. In humidity-reinforcement method, as vapor enters, silica sol is formed in the gap between one aggregate particle and another, and various condensation polymerization occurred in the drying process, which lead to aggregates connection and compressive strength improvement.

scholarly journals A Novel Approach to Fabricate Foam Ceramics from Steel Slag

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Yu Zheng ◽  
Xudong Luo ◽  
Jinlong Yang ◽  
Wenlong Huo ◽  
Chi Kang
Keyword(s):  
Compressive Strength ◽  
Ph Value ◽  
Steel Slag ◽  
Raw Material ◽  
Solid Loading ◽  
Insulation Material ◽  
Ceramic Foams ◽  
Novel Approach ◽  
The Stability ◽  
First Time

A novel approach is used for fabricating steel slag foam ceramics based on the particle-stabilized foaming method. In this work, steel slag was used as the raw material and propyl gallate (PG) was used as the surface modifier. For the first time, steel slag ceramic foams were successfully fabricated based on particle-stabilized foams. The results show that the stability of the ceramic foams was closely related to the pH value and PG concentration. The porosity and compressive strength could be controlled by changing the solid loading of steel slag and sintering temperature. The porosity of steel slag foam ceramics ranged from 85.6% to 62.53%, and the compressive strength was from 1.74 MPa to 10.42 MPa. The thermal conductivity of steel slag foam ceramics was only 0.067 W (m·K)−1, which shows that it could be used as a thermal insulation material.

scholarly journals Possible Use Of Hemp And Wood In Production Of The Heat Insulation Materials

2015 ◽  
Vol 1 ◽  
pp. 323
Author(s):  
Martins Andzs ◽  
Voldemars Skrupskis
Keyword(s):  
Moisture Content ◽  
Water Absorption ◽  
Heat Insulation ◽  
Raw Material ◽  
Insulation Material ◽  
Heat Transmission ◽  
Insulation Materials ◽  
Wood Fibres ◽  
Heat Insulation Material ◽  
Renewable Raw Material

Obtaining of a new ecological heat insulation material from always renewable raw material in nature, wood and hemp, derived from wood and hemp fibre remains left from the production process. The study was carried out to find hemp wood parts (shives), fiber, and material first possible compositions together with wood fibres, to produce heat insulation materials. The use of the heat insulation material would be meant for dwelling and recreation houses. In the present research the main characteristics of these materials are determined: moisture content, density, water absorption, as well as the coefficient of heat transmission.

scholarly journals USE OF SLUDGE FROM SANITARY SEWAGE TREATMENT PLANTS (S.T.P) AND THEIR USE AS RAW MATERIAL IN THE MANUFACTURE OF BRICKS

2019 ◽  
Vol 16 (33) ◽  
pp. 823-840
Author(s):  
M. K. TARABAI ◽  
S. G. de AZEVEDO
Keyword(s):  
Compressive Strength ◽  
Water Absorption ◽  
Sewage Treatment ◽  
Point Of View ◽  
Test Method ◽  
Raw Material ◽  
Environmental Preservation ◽  
Ceramic Block ◽  
Environmental Requirements ◽  
The One

This paper discusses a possible solution regarding the final disposal of sludge from Sanitary Sewage Treatment Stations (ET), aiming at environmental preservation. The solid waste generated after the wastewater treatment processes is highly contaminating and detrimental to the area in which it is deposited. Given this, the use of sludge with the application of reuse techniques becomes pertinent, both from the economic point of view and from the ecological point of view. By replacing the use of aggregates from mineral deposits, the main clay raw material in the manufacture of ceramic products (Vieira, 2000), by the treated sludge of WWTP we will save on the sources of granular materials. Aiming its reintegration to the production cycle through the introduction of sludge as raw material incorporated in the ceramic mass in the manufacture of hollow bricks, the viability of use was verified through performance analysis, compared to the control brick made of pottery, without the addition of sludge. Specimens were prepared with three types of samples: 90% clay and 10% sludge; 80% clay and 20% sludge; 70% clay and 30% sludge. Mass loss, water absorption index and compressive strength tests were performed. As for the tests, the specimens with 10% and 20% of sludge were the ones that had better adaptation to the technical requirements, but because it is a larger volume of the residue for the application of reuse techniques, the brick with 20% sludge dosage. is the most suitable. NBR7.171, November 1992: Ceramic Block for masonry; Specification NBR 6.461, June 1983: Masonry Ceramic Block - Compressive Strength Check: Test Method; NBR 8.947, November 1992: Ceramic Tile- Determination of Mass and Water Absorption: Test Method. As for the tests, the specimen with 20% of sludge was the one that had the best adaptation to technical and environmental requirements. The present article approaches a possible solution regarding the destination of the sludge coming from Sanitary Sewage Treatment Stations, aiming at environmental preservation. Aiming at its reintegration into the productive cycle through applications of reuse techniques, the sludge became raw material when the ceramic mass was incorporated into the brick fabrication. Three types of samples were elaborated: 90% of clay and 10% of mud; 80% clay and 20% sludge; 70% clay and 30% sludge. As for the tests, the test specimen with 20% of sludge was the one that had more adequacy to the technical and environmental requirements.

scholarly journals PRODUCTION OF THERMAL INSULATION MATERIAL BASED ON VOLCANIC ASH DEPOSITS OF PRIMAGADANYA

2019 ◽  
Vol 10 (2) ◽  
pp. 78-91
Author(s):  
A. V Bolotin ◽  
S. M Sergeev ◽  
A. A Lunegova ◽  
E. A Kochetkova
Keyword(s):  
Thermal Insulation ◽  
Building Materials ◽  
Volcanic Ash ◽  
Mineral Wool ◽  
Raw Material ◽  
Thermal Calculation ◽  
Vapor Permeability ◽  
Insulation Material ◽  
Comparative Performance ◽  
Insulation Materials

Modern technologies are not standing still, and scientists are trying not only to invent new building materials, but also to find non-standard use of various raw materials that were previously considered unsuitable for use. Innovative technologies are actively used for modern construction of buildings, in particular, some types of new materials are used in the construction of various facilities. This is especially true in areas where it is not possible to import or use ordinary building materials for various reasons. Often, when designing a building, developers are wondering whether it is worth making the house warm during construction, and which insulation for the walls of the house is better to choose. This article addresses the question of which insulation for walls is most suitable for construction. The most common are mineral insulation, which are represented on the market today in the form of basalt slabs, fiberglass, etc. They have such advantages as low thermal conductivity, good thermal insulation and vapor permeability. The article presents a table with comparative performance characteristics of a mineral wool stone slab and a fiberglass slab. Stone or basalt wool has several advantages. It is able to withstand significant temperatures and temperature changes, the mats are easy to transport, convenient to install. In our opinion, a serious alternative to basalt in the production of thermal insulation materials is volcanic ash. One of the main features of volcanic ash are its building qualities, such as good thermal insulation and an environmentally friendly composition. Since here we are considering the possibility of producing insulation materials based on volcanic ash, we performed a thermal calculation of the enclosing structures. Also in the tables are the costs of transportation of volcanic ash from the field to the point of the proposed production of insulating material. Volcanic ash can be widely used in countries with high volcanic activity as an inexpensive raw material for the manufacture of building materials. It does not require additional processing and has a number of useful properties.

scholarly journals Synthesis and characterization of innovative insulation materials

2018 ◽  
Vol 149 ◽  
pp. 01078
Author(s):  
Aggeliki Skaropoulou ◽  
Afroditi Ntziouni ◽  
Dimitris Kioupis ◽  
Sotiris Tsivilis ◽  
Glikeria Kakali
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Synthesis And Characterization ◽  
Insulation Material ◽  
Foaming Agent ◽  
Insulation Materials ◽  
Major Disadvantage ◽  
Reinforcing Agent ◽  
By Products

Insulation elements are distinguished in inorganic fibrous and organic foamed materials. Foamed insulation materials are of great acceptance and use, but their major disadvantage is their flammability. In case of fire, they tend to transmit the flame producing toxic gases. In this paper, the synthesis and characterization of innovative inorganic insulation materials with properties competitive to commercial is presented. Their synthesis involves the mixing of inorganic raw material and water with reinforcing agent or/and foaming agent leading to the formation of a gel. Depending on raw materials nature, the insulation material is produced by freeze drying or ambient drying techniques of the gel. The raw material used are chemically benign and abundantly available materials, or industrial by-products and the final products are non-toxic and, in some cases, non-flammable. Their density and thermal conductivity was measured and found 0.02-0.06 g/cm3 and 0.03-0.04 W/mK, respectively.

scholarly journals A Compressive Peak Strength Model for CFRP-Confined Thermal Insulation Materials under Elevated Temperature

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 26 ◽  
Author(s):  
Yeou-Fong Li ◽  
Wai-Keong Sio ◽  
Ying-Kuan Tsai
Keyword(s):  
Compressive Strength ◽  
Elevated Temperature ◽  
Thermal Insulation ◽  
Thermal Softening ◽  
Peak Strength ◽  
Insulation Material ◽  
Strength Model ◽  
Test Results ◽  
Thermal Insulation Material ◽  
Insulation Materials

In this paper, a compressive peak strength model for CFRP-confined thermal insulation materials under elevated temperature was proposed. The thermal insulation material was made by Portland cement with different portions of perlite. The compressive strengths of four different perlite ratios in weight, such as 0%, 10%, 20%, and 30% of thermal insulation materials, confined by one-layer, two-layer, and three-layer carbon fiber-reinforced polymer (CFRP) composite materials, were obtained. The test results indicated that the specimen’s compressive strength decreased with an increase in the amount of perlite replacement and increased with an increase in the number of CFRP wrapping layers. Based on the test results, a theoretical compressive peak strength model with some parameters was proposed. In the meantime, the compressive strengths of the above four different perlite ratios of thermal insulation materials under elevated temperature, such as ambient temperature, 100 °C, 150 °C, 200 °C, 250 °C, and 300 °C, were obtained. For compression tests of specimens with a fixed amount of perlite, the test results indicated that the specimen’s compressive strength decreased with an increase in temperature, highlighting a thermal softening phenomenon. Based on the test results, a compressive peak strength model with a thermal softening parameter was proposed to predict the peak strength under elevated temperature. Finally, a compressive peak strength model for thermal insulation material with CFRP confinement under different elevated temperature was derived, and it achieved acceptable results in comparison to the experimental results.

scholarly journals OPTIMIZE, UPGRADE OR INVEST IN A NOVEL DRYER? – A BRICK FACTORY CASE STUDY

2021 ◽  
Vol 1 (2) ◽  
pp. 62-70
Author(s):  
Miloš R. Vasić ◽  
◽  
Milica V. Vasić ◽  
Keyword(s):  
Raw Materials ◽  
Ambient Air ◽  
Raw Material ◽  
Drying Process ◽  
Tunnel Dryer ◽  
Large Size ◽  
Speed Up ◽  
The One ◽  
Industrial Level ◽  
Energy Balances

Drying has an enormous impact on the quality of final masonry clay elements. The accumulated knowledge about modeling the drying process, as well as the registered progress in computing the coupling between the heat and mass transfer during the last decade has reached the applicative industrial level. The available novel commercial drying solutions have dropped the drying cycle to 5 hours for hollow clay products and up to 9 hours for clay blocks of large size and weight. The ability to speed up the drying process also strongly depends on the properties of the raw materials. The decision on optimization of the existing dryer and its upgrade or investment in a novel drying facility must be experimentally validated. Results of the one-month monitoring and analysis of the production process in one Serbian brick factory including the material and energy balances are given in this paper. Based on the collected data, raw material limitations and costs of the novel dryer the existing tunnel dryer upgrade and the minimization of the "false" ambient air into the dryer are proposed.

scholarly journals Sustainable Thermal Insulation Biocomposites from Locally Available Hemp and Lime

2015 ◽  
Vol 1 ◽  
pp. 73 ◽  
Author(s):  
Maris Sinka ◽  
Genadijs Sahmenko
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Insulation ◽  
Co2 Reduction ◽  
Insulation Material ◽  
Hydraulic Lime ◽  
Second Stage ◽  
Binder Ratio ◽  
Good Potential ◽  
The One

The key focus of the presented research is on sustainable thermal insulation biocomposites which can be made from locally available hemp and lime. The main gains of the use of such material are given, with emphasis on CO2 reduction. In the first stage samples of an artificial hydraulic lime using three different limes and three hydraulic additives are created and tested, the one with the highest compressive strength (DL60 lime with 40% metakaolin addition) are chosen for further research. In the second stage three different density mixes with the chosen binder are created, optimal hemp/binder ratio is determined, as well as compressive strength and thermal conductivity. Results indicate that created mixtures have good potential as self-bearing thermal insulation material used in low-rise buildings.

Evaluation of Structure Influence on Thermal Conductivity of Thermal Insulating Materials from Renewable Resources

1970 ◽  
Vol 17 (2) ◽  
pp. 208-212 ◽  
Author(s):  
Jolanta VĖJELIENĖ ◽  
Albinas GAILIUS ◽  
Sigitas VĖJELIS ◽  
Saulius VAITKUS ◽  
Giedrius BALČIŪNAS
Keyword(s):  
Thermal Conductivity ◽  
Thermal Insulation ◽  
Renewable Resources ◽  
Raw Materials ◽  
Raw Material ◽  
Barley Straw ◽  
Insulation Material ◽  
Insulating Materials ◽  
Insulation Materials ◽  
Thermal Insulating

The development of new thermal insulation materials needs to evaluate properties and structure of raw material, technological factors that make influence on the thermal conductivity of material. One of the most promising raw materials for production of insulation material is straw. The use of natural fibres in insulation is closely linked to the ecological building sector, where selection of materials is based on factors including recyclable, renewable raw materials and low resource production techniques In current work results of research on structure and thermal conductivity of renewable resources for production thermal insulating materials are presented. Due to the high abundance of renewable resources and a good its structure as raw material for thermal insulation materials barley straw, reeds, cattails and bent grass stalks are used. Macro- and micro structure analysis of these substances is performed. Straw bales of these materials are used for determining thermal conductivity. It was found that the macrostructure has the greatest effect on thermal conductivity of materials. Thermal conductivity of material is determined by the formation of a bale due to the large amount of pores among the stalks of the plant, inside the stalk and inside the stalk wall.http://dx.doi.org/10.5755/j01.ms.17.2.494

scholarly journals A Novel Strengthening Method for Damaged Pipeline under High Temperature Using Inorganic Insulation Material and Carbon Fiber Reinforced Plastic Composite Material

Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3484 ◽  
Author(s):  
Li ◽  
Tsai ◽  
Yang
Keyword(s):  
Compressive Strength ◽  
Composite Material ◽  
High Temperature ◽  
Carbon Fiber ◽  
Peak Strength ◽  
Insulation Material ◽  
Fiber Reinforced ◽  
Insulation Materials ◽  
Cfrp Composite ◽  
Strengthening Method

In this paper, a strengthening method for the damaged high-temperature steel pipeline using inorganic insulation material which was confined by carbon fiber reinforcement plastic (CFRP) composite materials was proposed. Two inorganic insulation materials were composed of magnesium phosphate cement (MPC) mixing with perlite and vermiculite powders, respectively. The influences of insulation material composites with various ratios of the perlite or vermiculite powder were discussed, in terms of compressive strength and thermal conductivity coefficients of inorganic insulation materials. The insulation materials confined by carbon fiber reinforced polymer jackets for enhancing the mechanical behavior were also investigated. From the experimental results, the main finding of the work was that the inorganic insulation materials added to the perlite powder represented greater insulation capability than added vermiculite ones under the condition of the same compressive strength. Different ratios of perlite inorganic insulation material cylinders with the dimension of ϕ 10 cm × 20 cm were confined by one layer and two layers of CFRP composite material. The compressive strength of the specimens increased by 258%–927% after using 1-layer CFRP composite material and increased by 480%–1541% after applying 2-layer CFRP composite material. A peak strength prediction model of insulation materials confined by CFRP was proposed, and it was found that the proposed model accurately predicted the peak strength of the inorganic insulation material cylinder. Finally, a verification test of the strengthening method for damaged high-temperature pipeline was performed to prove that the proposed strengthening method is feasible.

Sign in / Sign up

Export Citation Format

Share Document