Woven Textile Pressure Switch

2020 ◽  
Vol 850 ◽  
pp. 297-302
Author(s):  
Ilze Balgale ◽  
Ilze Baltina
Keyword(s):  
Pressure Sensor ◽  
Continuous Process ◽  
Three Dimensional ◽  
Hollow Structure ◽  
Woven Fabrics ◽  
Original Position ◽  
Electrically Conductive ◽  
Fabric Structure ◽  
Alarm Systems ◽  
Pressure Switch

In this paper has shown that the three-dimensional hollow weaving technique enables to produce a textile pressure sensor in one continuous process. Based on the multilayer fabric principle, the hollow woven fabrics can be created by connecting adjacent layers of the fabrics according to certain rules. The appropriate fabric structure has been selected and the three-layer weaving technique was used to make the textile pressure switch. The fabric structure is selected to ensure that the top and bottom layers are kept at a distance from each other. The electrically conductive tracks were embedded in the hollow structure of the fabric in bottom and middle layers. Three conditions must be fulfilled in order to create the textile switch: a) the fabric in normal condition keeps the shape required, i.e. the conductive elements are physically separated from each other; b) when the fabric is pressed, conductive elements are in contact, i.e. the switch is now in an electrically on state; c) after the pressure has been removed the fabric returns to its original position, i.e. switch is in an electrically off state. The behavior of the electrically conductive yarn and conductive tracks were tested in various ways. The stainless steel yarn woven in particular way can be used to create woven conductive tracks. Example of application: the pressure sensitive woven rug, the whole area or part of which acts as the pressure sensor or simple switch. The pressure switch in the floor coverings can turn on alarm systems or indicator lamps in the floor or wall coverings for guidance systems in public buildings.

Thermophysiological comfort properties of woven fabrics produced from hybrid yarns containing copper wires

2020 ◽  
pp. 152808372094773
Author(s):  
Eren Oner ◽  
Ahmet Cagdas Seckin ◽  
Huseyin Coskun ◽  
Dilara Evsever Kole
Keyword(s):  
Copper Wire ◽  
Air Permeability ◽  
Woven Fabrics ◽  
Thermal Camera ◽  
Polyester Yarn ◽  
Electrically Conductive ◽  
Fabric Density ◽  
Fabric Structure ◽  
Microscope Images ◽  
Transfer Properties

The aim of this study was to determine the thermophysiological comfort behavior of fabrics based on copper wire that can be used for electro-textile applications. For this purpose, hybrid folding yarns were produced by twisting cotton/polyester yarn with copper wire. These electrically conductive hybrid yarns were then used to produce upholstery fabrics with different weave types as plain, 2/1 twill and sateen weave in three different density levels as tight, medium and loose. Thermophysiological comfort properties such as air permeability, thermal and water vapor properties of the hybrid fabrics were measured. In addition, the heat transfer properties of the fabrics were investigated with thermal camera videos, and porosity values were determined from microscope images. In this way, the main thermophysiological comfort properties of the basic electro-textile structures were revealed. According to the results obtained, it was found that the use of conductive wire in the fabric structure did not negatively affect the thermophysiological comfort properties of the fabrics, and fabric density was a determining parameter in relation to the thermophysiological comfort properties of the fabrics. The obtained results of this study may be used to improve the design of electro-textile structures taking into account the thermophysiological comfort.

Effect of design parameters on the cushioning property of cellular fabric composites

2018 ◽  
Vol 89 (18) ◽  
pp. 3692-3699
Author(s):  
Chunhong Zhu ◽  
Jian Shi ◽  
Kasumi Hayashi ◽  
Hideaki Morikawa ◽  
Akio Sakaguchi ◽  
...  
Keyword(s):  
Design Method ◽  
Three Dimensional ◽  
Hollow Structure ◽  
Woven Fabric ◽  
Design Parameters ◽  
Polyurethane Elastomer ◽  
Fabric Structure ◽  
Fabric Composite ◽  
Fabric Composites ◽  
Compression Resistance

In this study, a new design method for a three-dimensional hollow structure woven fabric was proposed and the effect of cellular size on the cushioning property of the fabric-reinforced polyurethane elastomer composite was investigated. The fabric structure was analyzed from a cross-section view and the theoretical equations for the warp and weft yarns were proposed, using the fabric layer and cellular size as parameters. Nine kinds of fabrics with different layers and cellular size were fabricated with a Jacquard loom and reinforced with polyurethane elastomer to yield fabric composites. Then the effect of cellular size on the cushioning property of the fabric composites was discussed. The results showed that upon increasing the cellular size, the cellular fabric composite exhibited lower compression resistance. Moreover, the stress at a strain of 65% and the energy absorbed in the loading process were increased with decreasing cellular size. Moreover, the compression resilience was also changed with the cellular size. It can be concluded that the cellular size had an important effect on the cushioning property of the fabric composite, which can be considered as a design parameter for cushion material based on its usages.

CREATING AN OVER PRESSURE SENSOR METRAN-43 DI WITH THE KOMPAS-3D PROGRAM

2019 ◽  
Author(s):  
Roman Grishin ◽  
Dmitriy Nesnov
Keyword(s):  
Pressure Sensor ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Graphic Editor ◽  
The Creation ◽  
Photorealistic Images

This article describes the creation of a three-dimensional model of the overpressure sensor Metran-43 using the graphic editor COMPASS-v17, as well as photorealistic images in the program Artisan Rendering and created animation disassembly-Assembly of the device, allowing you to see the internal components of the product.

scholarly journals A flexible and highly sensitive pressure sensor based on three-dimensional electrospun carbon nanofibers

RSC Advances ◽  
2021 ◽  
Vol 11 (23) ◽  
pp. 13898-13905
Author(s):  
Chuan Cai ◽  
He Gong ◽  
Weiping Li ◽  
Feng Gao ◽  
Qiushi Jiang ◽  
...  
Keyword(s):  
Carbon Nanofibers ◽  
Pressure Sensor ◽  
Carbon Nanofiber ◽  
Three Dimensional ◽  
High Sensitivity ◽  
Highly Sensitive ◽  
Sensitive Pressure

A three-dimensional electrospun carbon nanofiber network was used to measure press strains with high sensitivity.

Prediction of internal geometry and tensile behavior of 3D woven solid structures by mathematical coding

2021 ◽  
pp. 152808372110013
Author(s):  
Vivek R Jayan ◽  
Lekhani Tripathi ◽  
Promoda Kumar Behera ◽  
Michal Petru ◽  
BK Behera
Keyword(s):  
Volume Fraction ◽  
Three Dimensional ◽  
Areal Density ◽  
Woven Fabrics ◽  
Tensile Behavior ◽  
Geometrical Parameters ◽  
Fiber Volume ◽  
Acceptable Error ◽  
Internal Geometry ◽  
Unit Cells

The internal geometry of composite material is one of the most important factors that influence its performance and service life. A new approach is proposed for the prediction of internal geometry and tensile behavior of the 3 D (three dimensional) woven fabrics by creating the unit cell using mathematical coding. In many technical applications, textile materials are subjected to rates of loading or straining that may be much greater in magnitude than the regular household applications of these materials. The main aim of this study is to provide a generalized method for all the structures. By mathematical coding, unit cells of 3 D woven orthogonal, warp interlock and angle interlock structures have been created. The study then focuses on developing code to analyze the geometrical parameters of the fabric like fabric thickness, areal density, and fiber volume fraction. Then, the tensile behavior of the coded 3 D structures is studied in Ansys platform and the results are compared with experimental values for authentication of geometrical parameters as well as for tensile behavior. The results show that the mathematical coding approach is a more efficient modeling technique with an acceptable error percentage.

scholarly journals Three-Dimensional Arterial Pulse Signal Acquisition in Time Domain Using Flexible Pressure-Sensor Dense Arrays

Micromachines ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 569
Author(s):  
Jianzhong Chen ◽  
Ke Sun ◽  
Rong Zheng ◽  
Yi Sun ◽  
Heng Yang ◽  
...  
Keyword(s):  
Radial Artery ◽  
Pressure Sensor ◽  
Pulse Width ◽  
Printed Circuit Boards ◽  
Color Doppler ◽  
Three Dimensional ◽  
Pressure Sensors ◽  
Sensor Arrays ◽  
Signal Acquisition ◽  
Dynamic Pulse

In this study, we developed a radial artery pulse acquisition system based on finger-worn dense pressure sensor arrays to enable three-dimensional pulse signals acquisition. The finger-worn dense pressure-sensor arrays were fabricated by packaging 18 ultra-small MEMS pressure sensors (0.4 mm × 0.4 mm × 0.2 mm each) with a pitch of 0.65 mm on flexible printed circuit boards. Pulse signals are measured and recorded simultaneously when traditional Chinese medicine practitioners wear the arrays on the fingers while palpating the radial pulse. Given that the pitches are much smaller than the diameter of the human radial artery, three-dimensional pulse envelope images can be measured with the system, as can the width and the dynamic width of the pulse signals. Furthermore, the array has an effective span of 11.6 mm—3–5 times the diameter of the radial artery—which enables easy and accurate positioning of the sensor array on the radial artery. This study also outlines proposed methods for measuring the pulse width and dynamic pulse width. The dynamic pulse widths of three volunteers were measured, and the dynamic pulse width measurements were consistent with those obtained by color Doppler ultrasound. The pulse wave velocity can also be measured with the system by measuring the pulse transit time between the pulse signals at the brachial and radial arteries using the finger-worn sensor arrays.

scholarly journals Nanofiber-Mâché Hollow Ball Mimicking the Three-Dimensional Structure of a Cyst

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2273
Author(s):  
Wan-Ying Huang ◽  
Norichika Hashimoto ◽  
Ryuhei Kitai ◽  
Shin-ichiro Suye ◽  
Satoshi Fujita
Keyword(s):  
Three Dimensional ◽  
Hollow Structure ◽  
Dimensional Structure ◽  
The Novel ◽  
Fibrous Scaffold ◽  
Hydrogel Beads ◽  
Inner Surface ◽  
Intracranial Epidermoid ◽  
Hollow Ball

The occasional malignant transformation of intracranial epidermoid cysts into squamous cell carcinomas remains poorly understood; the development of an in vitro cyst model is urgently needed. For this purpose, we designed a hollow nanofiber sphere, the “nanofiber-mâché ball.” This hollow structure was fabricated by electrospinning nanofiber onto alginate hydrogel beads followed by dissolving the beads. A ball with approximately 230 mm3 inner volume provided a fibrous geometry mimicking the topography of the extracellular matrix. Two ducts located on opposite sides provided a route to exchange nutrients and waste. This resulted in a concentration gradient that induced oriented migration, in which seeded cells adhered randomly to the inner surface, formed a highly oriented structure, and then secreted a dense web of collagen fibrils. Circumferentially aligned fibers on the internal interface between the duct and hollow ball inhibited cells from migrating out of the interior, similar to a fish bottle trap. This structure helped to form an adepithelial layer on the inner surface. The novel nanofiber-mâché technique, using a millimeter-sized hollow fibrous scaffold, is excellently suited to investigating cyst physiology.

An advanced geometrical model for laminated woven fabrics using Lamé exponents with enhanced accuracy

2017 ◽  
Vol 52 (11) ◽  
pp. 1443-1455
Author(s):  
Mike Mühlstädt ◽  
Wolfgang Seifert ◽  
Matthias ML Arras ◽  
Stefan Maenz ◽  
Klaus D Jandt ◽  
...  
Keyword(s):  
High Performance ◽  
Volume Fraction ◽  
Level Structure ◽  
Three Dimensional ◽  
Geometrical Model ◽  
Woven Fabrics ◽  
Fiber Volume ◽  
Meso Level ◽  
Precise Prediction ◽  
Microscopy Images

Three-dimensional stiffness tensors of laminated woven fabrics used in high-performance composites need precise prediction. To enhance the accuracy in three-dimensional stiffness tensor prediction, the fabric’s architecture must be precisely modeled. We tested the hypotheses that: (i) an advanced geometrical model describes the meso-level structure of different fabrics with a precision higher than established models, (ii) the deviation between predicted and experimentally determined mean fiber-volume fraction ( cf) of laminates is below 5%. Laminates of different cf and fabrics were manufactured by resin transfer molding. The laminates’ meso-level structure was determined by analyzing scanning electron microscopy images. The prediction of the laminates’ cf was improved by up to 5.1 vol% ([Formula: see text]%) compared to established models. The effect of the advanced geometrical model on the prediction of the laminate’s in-plane stiffness was shown by applying a simple mechanical model. Applying an advanced geometrical model may lead to more accurate simulations of parts for example in automotive and aircraft.

Mechanical Evaluation of the Pronator Teres Rerouting Tendon Transfer

2004 ◽  
Vol 29 (3) ◽  
pp. 257-262 ◽  
Author(s):  
H. E. J. VEEGER ◽  
M. KREULEN ◽  
M. J. C. SMEULDERS
Keyword(s):  
Biceps Brachii ◽  
External Rotation ◽  
Three Dimensional ◽  
Muscle Length ◽  
Biomechanical Model ◽  
Elbow Flexion ◽  
Axial Rotation ◽  
Original Position ◽  
Pronator Quadratus ◽  
Pronator Teres

We simulated pronator teres rerouting using a three-dimensional biomechanical model of the arm. Simulations comprised the evaluation of changes in muscle length and the moment arm of pronator teres with changes in forearm axial rotation and elbow flexion. The rerouting of Pronator Teres was simulated by defining a path for it through the interosseous membrane with re-attachment to its original insertion. However the effect of moving the insertion to new positions, 2 cm below and above, the original position was also assessed. The effect on total internal rotation and external rotation capacity was determined by calculating the potential moments for pronator teres, supinator, pronator quadratus, biceps brachii and brachioradialis. Pronator teres was found to be a weak internal rotator in extreme pronation, but a strong internal rotator in neutral rotation and in supination. After rerouting pronator teres was only a strong external rotator in full pronation and not at other forearm positions, where the effect of rerouting was comparable to a release procedure.

Three-dimensional graphene encapsulated hollow CoSe2-SnSe2 nanoboxes for high performance asymmetric supercapacitors

2022 ◽  
Author(s):  
Kainan Li ◽  
Ke Zheng ◽  
Zhifang Zhang ◽  
Kuan Li ◽  
Ziyao Bian ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Active Sites ◽  
Specific Capacity ◽  
Three Dimensional ◽  
Hollow Structure ◽  
Large Specific Surface Area ◽  
Composite Aerogel

Abstract Construction of metal selenides with a large specific surface area and a hollow structure is one of the effective methods to improve the electrochemical performance of supercapacitors. However, the nano-material easily agglomerates due to the lack of support, resulting in the loss of electrochemical performance. Herein, we successfully design a three-dimensional graphene (3DG) encapsulation-protected hollow nanoboxes (CoSe2-SnSe2) composite aerogel (3DG/CoSe2-SnSe2) via a co-precipitation method coupled with self-assembly route, followed by a high temperature selenidation strategy. The obtained aerogel possesses porous 3DG conductive network, large specific surface area and plenty of reactive active sites. It could be used as a flexible and binder-free electrode after a facile mechanical compression process, which provided a high specific capacitance of 460 F g-1 at 0.5 A g-1, good rate capability of 212.7 F g-1 at 10 A g-1, and excellent cycle stability due to the fast electron/ion transfer and electrolyte diffusion. With the as-prepared 3DG/CoSe2-SnSe2 as positive electrodes and the AC (activated carbon) as negative electrodes, an asymmetric supercapacitor (3DG/CoSe2-SnSe2//AC) was fabricated, which delivered a high specific capacity of 38 F g-1 at 1A g-1 and an energy density of 11.89 W h kg-1 at 749.9 W kg-1, as well as a capacitance retention of 91.1% after 3000 cycles. This work provides a new method for preparing electrode material.

Sign in / Sign up

Export Citation Format

Share Document