Influence of Cement Type on Stability of Concrete Mixture

2021 ◽  
Vol 321 ◽  
pp. 15-21
Author(s):  
Martin Ťažký ◽  
Rudolf Hela
Keyword(s):  
Construction Material ◽  
Physical Parameters ◽  
Cement Type ◽  
Water Separation ◽  
Cement Production ◽  
Concrete Mixtures ◽  
Single European Market ◽  
Emission Limits ◽  
The Stability ◽  
The Relationship

The continuous tightening of emission limits for the production of harmful substances into the air and the rising price of emission allowances gradually force construction material producers to limit the use of binders with a high content of Portland clinker. In the production of concrete, this is achieved by using admixtures, which make it possible to reduce Portland cement doses. However, the single European market uses a method that maximises the use of blened cements, making it easier for cement plants to meet emission limits while not reducing cement production. The performed experiment focused on the possibility of using CEM II and CEM III cements and their comparison with CEM I cement not only in terms of the physical–mechanical parameters of concrete but also in terms of the stability of concrete mixtures made from these cements. The stability of concrete mixtures was monitored using the water separation value in the pressure method. In the experiment, the relationship between water separation and physical parameters of cement was explored.

scholarly journals Mechanical Properties of Concrete Containing Liquefied Red Mud Subjected to Uniaxial Compression Loads

Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 854 ◽  
Author(s):  
Gyeongcheol Choe ◽  
Sukpyo Kang ◽  
Hyeju Kang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Red Mud ◽  
Construction Material ◽  
Strain Curve ◽  
Peak Strain ◽  
Cement Type ◽  
Mixing Method ◽  
Relationship Of ◽  
The Relationship

This study used liquefied red mud (RM) sludge, an aluminum industry by-product, as a construction material. Accordingly, various methods were examined that used the fabricated liquefied red mud (LRM) as an admixture for concrete, and the mechanical properties of concrete were then evaluated according to the cement type and the amount of LRM. The LRM mixing methods (replacement and addition) were compared, and the slump and compressive strengths of concrete were evaluated for each method. To examine the mechanical properties according to the cement type and the amount of LRM, two types of cement (ordinary Portland cement and slag cement (SC)) were used, and 20 and 40 wt% LRM (with respect to the cement weight) were added. The mechanical properties of the stress–strain curve (SSC), compressive strength, peak strain, and elastic modulus were quantified. When the slump and compressive strength of concrete were considered based on the experimental results, the addition LRM mixing method was recommended as the appropriate method for LRM. As the addition of LRM increased, the mechanical properties of concrete degraded. However, when SC was used, the mechanical properties did not significantly change when different amounts of LRM were added (up to 20%). In addition, the SSC of LRM concrete could be approximated based on the use of the relationship of the compressive strength and peak strain according to the cement type and the amount of LRM.

An Experimental Investigation on Thermal Conductivity and Viscosity of Graphene doped CNTs /TiO2 Nanofluid

2020 ◽  
Vol 17 (3) ◽  
Author(s):  
A.M. Zetty Akhtar ◽  
M.M. Rahman ◽  
K. Kadirgama ◽  
M.A. Maleque
Keyword(s):  
Thermal Conductivity ◽  
Zeta Potential ◽  
Base Fluid ◽  
Minimum Quantity Lubrication ◽  
Cutting Fluid ◽  
Cutting Zone ◽  
Observation Method ◽  
The Stability ◽  
The Relationship ◽  
Zeta Potential Analysis

This paper presents the findings of the stability, thermal conductivity and viscosity of CNTs (doped with 10 wt% graphene)- TiO2 hybrid nanofluids under various concentrations. While the usage of cutting fluid in machining operation is necessary for removing the heat generated at the cutting zone, the excessive use of it could lead to environmental and health issue to the operators. Therefore, the minimum quantity lubrication (MQL) to replace the conventional flooding was introduced. The MQL method minimises the usage of cutting fluid as a step to achieve a cleaner environment and sustainable machining. However, the low thermal conductivity of the base fluid in the MQL system caused the insufficient removal of heat generated in the cutting zone. Addition of nanoparticles to the base fluid was then introduced to enhance the performance of cutting fluids. The ethylene glycol used as the base fluid, titanium dioxide (TiO2) and carbon nanotubes (CNTs) nanoparticle mixed to produce nanofluids with concentrations of 0.02 to 0.1 wt.% with an interval of 0.02 wt%. The mixing ratio of TiO2: CNTs was 90:10 and ratio of SDBS (surfactant): CNTs was 10:1. The stability of nanofluid checked using observation method and zeta potential analysis. The thermal conductivity and viscosity of suspension were measured at a temperature range between 30˚C to 70˚C (with increment of 10˚C) to determine the relationship between concentration and temperature on nanofluid’s thermal physical properties. Based on the results obtained, zeta potential value for nanofluid range from -50 to -70 mV indicates a good stability of the suspension. Thermal conductivity of nanofluid increases as an increase of temperature and enhancement ratio is within the range of 1.51 to 4.53 compared to the base fluid. Meanwhile, the viscosity of nanofluid shows decrements with an increase of the temperature remarks significant advantage in pumping power. The developed nanofluid in this study found to be stable with enhanced thermal conductivity and decrease in viscosity, which at once make it possible to be use as nanolubricant in machining operation.

A FORECAST OF PRODUCTIVE LONGEVITY OF HOLSTEIN COWS BY INDIRECT SIGNS

2020 ◽  
Author(s):  
З.С. САНОВА
Keyword(s):  
Correlation Coefficient ◽  
Aging Process ◽  
Direct Relationship ◽  
Stability Index ◽  
Age At First Calving ◽  
Group I ◽  
Predicted Values ◽  
The Stability ◽  
Relationship Of ◽  
The Relationship

В статье представлены материалы о взаимосвязи продолжительности продуктивного использования коров с характеристикой устойчивости к деградации, с возрастом отела и удоем. В исследованной, разнородной по происхождению, группе животных для прогноза продуктивного периода коров, обусловленного устойчивостью к деградации и возрастом первого отела, пригодно уравнение регрессии, аргументами в котором являются индекс устойчивости, возраст первого отела в первой и второй степенях. Коэффициент корреляции межу предсказанными значениями продуктивного периода и его фактическими величинами в I группе составляет 0,502, во II - 0,604. При этом крайние варианты прогнозируются со статистическими ошибками 5 мес при оценке индекса устойчивости по 2 лактациям и 4,1 мес по 3, а средние варианты, соответственно, 1,6 и 1,51 мес. Индекс устойчивости к процессу старения является важной характеристикой биологических особенностей коров, определяющий их продуктивное долголетие. Его оценка по первым 2 и 3 лактациям имеет прямолинейную связь с продуктивным периодом (r=0,4109 и r=0,5270), соответственно. Зависимость продуктивного периода от возраста первого отела криволинейная — с увеличением возраста первого отела сокращается срок продуктивного использования, при возрасте первого отела более 1400 дней срок продуктивного использования колеблется от 1,33 до 1,41 лактации. Коэффициент корреляции между этими характеристиками коров составляет - 0,2164 в I и - 0,2620 во II группах. The article presents materials about the relationship of the duration of productive use of cows with the characteristic of resistance to degradation, with the age of calving and milk yield. In the studied group of animals, which is heterogeneous in origin, the regression equation is suitable for predicting the productive period of cows due to resistance to degradation and the age of the first calving, the arguments of which are the stability index, the age of the first calving in the first and second degrees. The correlation coefficient between the predicted values of the productive period and its actual values in group I is 0.502, in group II - 0.604. At the same time, the extreme variants are predicted with statistical errors of 5 months when evaluating the stability index for 2 lactations and 4.1 months for 3, and the average variants, respectively, are 1.6 and 1.51 months. The index of resistance to the aging process is an important characteristic of the biological characteristics of cows, which determines their productive longevity. Its estimate for the first 2 and 3 lactations has a direct relationship with the productive period (r=0.4109 and r=0.5270), respectively. The dependence of the productive period age at first calving curvilinear with increasing age at first calving reduces the time to productive use, while age at first calving of more than 1400 days, the period of productive use ranges from 1.33 to 1.41 lactation. The correlation coefficient between these characteristics of cows is-0.2164 in I and-0.2620 in II groups.

Substantiation the machine with a basket for the application of mineral fertilizers and other bulk materials with the upper arrangement of the feeding device

2019 ◽  
pp. 37-43
Author(s):  
Fesenko, H.
Keyword(s):  
Fat Body ◽  
Mineral Fertilizer ◽  
The Body ◽  
Mineral Fertilizers ◽  
Analytical Mechanics ◽  
Bulk Materials ◽  
The Stability ◽  
Working Bodies ◽  
The Relationship ◽  
Stable Flow

Purpose. Increasing the uniformity of distribution of mineral fertilizers and other bulk materials due to the stability of their feed from the body to the spreading working bodies using the top feeder. Methods. The following methods are used to achieve this aim: the method of comparing the differences between individual groups of fertilizers, the method of analyzing the properties of a new technical system, the method of functional inventiveness, and the methods of theoretical and analytical mechanics. Results. The traction body of the conveyor of the upper feed of the body fat body machine for mineral fertilizers and other bulk materials was substantiated and the relationship between the height of its scrapers and the distance between them was established, as well as the nature of the mineral fertilizer pressure on the curvilinear wall of the body. In addition, the design of the advanced body fertilizer spreader is justified, which ensures a stable flow of fertilizers from the body due to the improvement of the top feeder. Conclusions. Because of the conducted researches, the advantages of machines equipped with top feeder are found. They create the conditions for the forced feeding mineral fertilizers and other loose materials from the container to the distribution bodies, which is a prerequisite for their evenness on the surface. With this, the imperfection of known machines with the top feeder constrains their introduction into agricultural production. On this account, a more thoroughly constructed solution of the body feeder of the top feed is substantiated, in which the conveyor provides a stable supply of fertilizers from the body with reduced energy consumption during operation. Keywords: analysis, feed, upper device, conveyor, stability, fertilizers, flow ability, body.

FINANCIAL CRISES AND THE PUBLICATION OF THE FINANCIAL STATEMENTS OF BANKS IN SPAIN, 1844–1868

2004 ◽  
Vol 31 (2) ◽  
pp. 1-26 ◽  
Author(s):  
Mercedes Bernal Lloréns
Keyword(s):  
19Th Century ◽  
Financial Reporting ◽  
Economic Performance ◽  
Financial Crises ◽  
Limited Liability ◽  
Financial Statements ◽  
Early Response ◽  
Banking Regulations ◽  
The Stability ◽  
The Relationship

Financial crises have had a decisive influence on banking regulations in Spain. During the mid-19th century the publication of the financial statements of banks was considered key to the stability of the financial system. All new joint stock banking companies were to publish their statements in the Madrid Gazette in return for the privilege of limited liability. Similar obligations were placed on issuing banks. The copious publication of financial statements coincided with a period of financial prosperity. However, the crises that followed from 1864 to 1868 led to a reduction in the official publication of statements. This paper is concerned with an early response to crises in financial reporting. The study focuses on the relationship between the publication of accounting statements by banks and the GDP in Spain during the mid-19th century. The results suggest that the frequency of publication of financial statements may be an indicator of economic performance.

scholarly journals Review of the relationship between aggregates geology and Los Angeles and micro-Deval tests

2021 ◽  
Vol 80 (3) ◽  
pp. 1963-1980
Author(s):  
Solomon Adomako ◽  
Christian John Engelsen ◽  
Rein Terje Thorstensen ◽  
Diego Maria Barbieri
Keyword(s):  
Los Angeles ◽  
Crystal Size ◽  
Grain Shape ◽  
Mechanical Performance ◽  
Pore Space ◽  
Construction Material ◽  
Engineering Properties ◽  
Coarse Grained ◽  
The Impact ◽  
The Relationship

AbstractRock aggregates constitute the enormous volume of inert construction material used around the globe. The petrologic description as igneous, sedimentary, and metamorphic types establishes the intrinsic formation pattern of the parent rock. The engineering properties of these rocks vary due to the differences in the transformation process (e.g. hydrothermal deposits) and weathering effect. The two most common mechanical tests used to investigate the performance of aggregates are the Los Angeles (LA) and micro-Deval (MD) tests. This study reviewed the geological parameters (including mineralogy, grain and crystal size, grain shape, and porosity) and the relationship to Los Angeles and micro-Deval tests. It was found that high content of primary minerals in rocks (e.g. quartz and feldspar) is a significant parameter for performance evaluation. Traces of secondary and accessory minerals also affect the performance of rocks, although in many cases it is based on the percentage. Furthermore, some studies showed that the effect of mineralogic composition on mechanical strength is not sufficient to draw final conclusions of mechanical performance; therefore, the impact of other textural characteristics should be considered. The disposition of grain size and crystal size (e.g. as result of lithification) showed that rocks composed of fine-grain textural composition of ≤ 1 mm enhanced fragmentation and wear resistance than medium and coarse grained (≥ 1 mm). The effect of grain shape was based on convex and concave shapes and flat and elongated apexes of tested samples. The equidimensional form descriptor of rocks somehow improved resistance to impact from LA than highly flat and elongated particles. Lastly, the distribution of pore space investigated by means of the saturation method mostly showed moderate (R = 0.50) to strong (R = 0.90) and positive correlations to LA and MD tests.

scholarly journals Charge Transfer Complexes of Ketotifen with 2,3-Dichloro-5,6-dicyano-p-benzoquinone and 7,7,8,8-Tetracyanoquodimethane: Spectroscopic Characterization Studies

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 2039
Author(s):  
Gamal A. E. Mostafa ◽  
Ahmed Bakheit ◽  
Najla AlMasoud ◽  
Haitham AlRabiah
Keyword(s):  
Charge Transfer ◽  
Spectroscopic Characterization ◽  
Molar Ratio ◽  
Charge Transfer Complexes ◽  
Physical Parameters ◽  
Spectrophotometric Methods ◽  
Theoretical Approaches ◽  
The Stability ◽  
Ct Complexes

The reactions of ketotifen fumarate (KT) with 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) as π acceptors to form charge transfer (CT) complexes were evaluated in this study. Experimental and theoretical approaches, including density function theory (DFT), were used to obtain the comprehensive, reliable, and accurate structure elucidation of the developed CT complexes. The CT complexes (KT-DDQ and KT-TCNQ) were monitored at 485 and 843 nm, respectively, and the calibration curve ranged from 10 to 100 ppm for KT-DDQ and 2.5 to 40 ppm for KT-TCNQ. The spectrophotometric methods were validated for the determination of KT, and the stability of the CT complexes was assessed by studying the corresponding spectroscopic physical parameters. The molar ratio of KT:DDQ and KT:TCNQ was estimated at 1:1 using Job’s method, which was compatible with the results obtained using the Benesi–Hildebrand equation. Using these complexes, the quantitative determination of KT in its dosage form was successful.

scholarly journals Numerical simulation of periodic MHD casson nanofluid flow through porous stretching sheet

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Abdullah Al-Mamun ◽  
S. M. Arifuzzaman ◽  
Sk. Reza-E-Rabbi ◽  
Umme Sara Alam ◽  
Saiful Islam ◽  
...  
Keyword(s):  
Fluid Flow ◽  
Lewis Number ◽  
Stability And Convergence ◽  
Radiation Absorption ◽  
Physical Parameters ◽  
Theoretical Idea ◽  
Prostate Cancer Therapy ◽  
Flow Through ◽  
Explicit Finite Difference ◽  
The Stability

AbstractThe perspective of this paper is to characterize a Casson type of Non-Newtonian fluid flow through heat as well as mass conduction towards a stretching surface with thermophoresis and radiation absorption impacts in association with periodic hydromagnetic effect. Here heat absorption is also integrated with the heat absorbing parameter. A time dependent fundamental set of equations, i.e. momentum, energy and concentration have been established to discuss the fluid flow system. Explicit finite difference technique is occupied here by executing a procedure in Compaq Visual Fortran 6.6a to elucidate the mathematical model of liquid flow. The stability and convergence inspection has been accomplished. It has observed that the present work converged at, Pr ≥ 0.447 indicates the value of Prandtl number and Le ≥ 0.163 indicates the value of Lewis number. Impact of useful physical parameters has been illustrated graphically on various flow fields. It has inspected that the periodic magnetic field has helped to increase the interaction of the nanoparticles in the velocity field significantly. The field has been depicted in a vibrating form which is also done newly in this work. Subsequently, the Lorentz force has also represented a great impact in the updated visualization (streamlines and isotherms) of the flow field. The respective fields appeared with more wave for the larger values of magnetic parameter. These results help to visualize a theoretical idea of the effect of modern electromagnetic induction use in industry instead of traditional energy sources. Moreover, it has a great application in lung and prostate cancer therapy.

The relationship between physical parameters and wear of dental composites

Wear ◽  
2007 ◽  
Vol 263 (7-12) ◽  
pp. 1138-1146 ◽  
Author(s):  
S.D. Heintze ◽  
G. Zellweger ◽  
G. Zappini
Keyword(s):  
Dental Composites ◽  
Physical Parameters ◽  
The Relationship

scholarly journals Cats in the forest: predicting habitat adaptations from humerus morphometry in extant and fossil Felidae (Carnivora)

Paleobiology ◽  
10.1666/12001 ◽  
2013 ◽  
Vol 39 (3) ◽  
pp. 323-344 ◽  
Author(s):  
Carlo Meloro ◽  
Sarah Elton ◽  
Julien Louys ◽  
Laura C. Bishop ◽  
Peter Ditchfield
Keyword(s):  
Morphological Variability ◽  
Olduvai Gorge ◽  
Environmental Predictors ◽  
Linear Measurements ◽  
Multivariate Statistical ◽  
Linear Discriminant ◽  
Related Group ◽  
Discriminant Analyses ◽  
The Stability ◽  
The Relationship

Mammalian carnivores are rarely incorporated in paleoenvironmental reconstructions, largely because of their rarity within the fossil record. However, multivariate statistical modeling can be successfully used to quantify specific anatomical features as environmental predictors. Here we explore morphological variability of the humerus in a closely related group of predators (Felidae) to investigate the relationship between morphometric descriptors and habitat categories. We analyze linear measurements of the humerus in three different morphometric combinations (log-transformed, size-free, and ratio), and explore four distinct ways of categorizing habitat adaptations. Open, Mixed, and Closed categories are defined according to criteria based on traditional descriptions of species, distributions, and biome occupancy. Extensive exploratory work is presented using linear discriminant analyses and several fossils are included to provide paleoecological reconstructions.We found no significant differences in the predictive power of distinct morphometric descriptors or habitat criteria, although sample splitting into small and large cat guilds greatly improves the stability of the models. Significant insights emerge for three long-canine cats:Smilodon populator,Paramachairodus orientalis, andDinofelissp. from Olduvai Gorge (East Africa).S. populatorandP. orientalisare both predicted to have been closed-habitat adapted taxa. The false “sabertooth”Dinofelissp. from Olduvai Gorge is predicted to be adapted to mixed habitat. The application of felid humerus ecomorphology to the carnivoran record of Olduvai Gorge shows that the older stratigraphic levels (Bed I, 1.99–1.79 Ma) included a broader range of environments than Beds II or V, where there is an abundance of cats adapted to open environments.

Sign in / Sign up

Export Citation Format

Share Document