scholarly journals Comparative analysis of the main occupations working conditions in the copper production by pyrometallurgical and hydrometallurgical methods in Russia

2021 ◽  
Vol 100 (12) ◽  
pp. 1443-1448
Author(s):  
Georgiy Ya. Lipatov ◽  
Ekaterina E. Shmakova ◽  
Vadim I. Adrianovskiy ◽  
Natalia V. Zlygosteva ◽  
Eduard G. Plotko
Keyword(s):  
Comparative Analysis ◽  
Working Conditions ◽  
Raw Materials ◽  
Copper Production ◽  
Copper Smelting ◽  
Occupational Cancer ◽  
Predicted Values ◽  
Hydrometallurgical Method ◽  
First Time ◽  
Primary Materials

Introduction. The primary materials for copper production are sulfide copper-nickel and oxidized ores with a copper percentage of 1.5-4%, traditionally processed by the pyrometallurgical method. For processing depleted copper-containing raw materials (less than 1%), the pyrometallurgical approach is not commonly suitable. The introduced hydrometallurgical way differs by including in one production process, combined underground leaching of ore, extraction of copper from solution, and the following electrolysis. At the same time, insufficient attention is paid to the hydrometallurgical method of processing depleted copper raw materials from a hygienic standpoint in our country. Materials and methods. Based on the results of our research carried out at copper-smelting plants using pyro- and hydrometallurgical methods of processing raw materials, a comparative analysis was carried out for such indicators as the pollutants content in the workplaces’ air at different stages of production, predicted values of occupational cancer risks, toxicity indicators, and the health and essential physiological functions of workers. Results. Working under increased heat intensity in hot shops, exposure to sulfur-containing gases and industrial aerosols leads to significant changes in hemodynamics and thermoregulation stress in workers. In the hydrometallurgical production of copper, the only occupational hazard exceeding hygienic standards is sulfuric acid vapours, and changes in physiological parameters and thermoregulation are insignificant. The predicted values of occupational cancer risk for hydrometallurgical machines operators exceed the acceptable level after 9-10 years of working experience. For smelters, an unacceptable level of risk is achieved with up to 5 years of working experience. Conclusion. For the first time in the country, a hygienic assessment of the hydrometallurgical method of processing depleted copper raw materials was proved to be the only appropriate method of improving working conditions in copper production.

scholarly journals Tekstylia i pieczęcie. O relacjach pomiędzy produkcją włókienniczą a praktykami stemplowania w Grecji epoki brązu oraz o zupełnie nowych danych z odcisków glinianych pieczęci

2021 ◽  
Vol 69 ◽  
pp. 111-135
Author(s):  
Agata Ulanowska
Keyword(s):  
Comparative Analysis ◽  
Bronze Age ◽  
Raw Materials ◽  
Textile Production ◽  
Site Specific ◽  
Textile Manufacturing ◽  
Organic Products ◽  
Materials Used ◽  
First Time ◽  
New Evidence

This contribution discusses the evidence of textile impressions preserved on the undersides of clay sealings from Bronze Age Greece. A collection of modern casts taken from these sealings, stored in the Corpus der minoischen und mykenischen Siegel in Heidelberg, is currently being analyzed by the author. The assumed reliability of textile impressions as a source of knowledge about the qualities of actual textiles and raw materials used to produce them has been verified by a series of archaeological experiments and comparative analysis of modern raw materials of various origin. Results ofthe analysis of 199 casts from two Aegean sites: Lerna in Argolid and Phaistos on Crete, have provided new evidence for technical uses of textile and organic products in the daily storage routine and sealing practices, as well as for the specific parameters of threads, cords, and fabrics impressed on clay. Due to the relatively large number of textile imprints, it is possible, for the first time, to make site-specific comparisons of textile production on the basis of products and to tracktechnical developments in textile manufacturing throughout the Aegean Bronze Age.

scholarly journals Ancient Pigments in Afrasiab Murals: Characterization by XRD, SEM, and Raman Spectroscopy

Minerals ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 939
Author(s):  
Dong-Hyeok Moon ◽  
Na-Ra Lee ◽  
Eun-Woo Lee
Keyword(s):  
Raman Spectroscopy ◽  
Raw Materials ◽  
Silk Road ◽  
Seventh Century ◽  
Raw Material ◽  
Accurate Information ◽  
X Ray ◽  
Ancient Silk Road ◽  
First Time ◽  
Primary Materials

The Afrasiab murals discovered in the northeast of Samarkand, Uzbekistan—the center of the ancient Silk Road—are presumed to date to the mid-seventh century during the Sogdian era. Although previous studies have examined the primary materials of the pigments used in these murals using chemical and microscopic analyses, in-depth investigations of the pigment raw material composition have not been conducted to verify the results of these studies. We applied X-ray diffractometry, Raman spectroscopy, and scanning electron microscopy in conjunction with energy-dispersive X-ray spectroscopy for the first time to identify the raw materials of ancient pigments in fragments obtained from the Afrasiab murals. The results show that lazurite, cinnabar, and amorphous carbon were used as blue, red, and black pigments, respectively. Moreover, we identified that pigments were not directly painted on the wall surface; instead, they were painted on a white undercoat of gypsum plaster, similar to other ancient Silk Road wall paintings. The results of this study can benefit the provision of more accurate information with regard to the composition of raw materials and further support the selection of appropriate substances for the purposes of conservation and restoration of Afrasiab murals.

ON THE PROCESSING OF HEMATITE RAW MATERIALS AT THE KRYVOROZHSK MINING AND PROCESSING PLANT OF OXIDIZED ORE ON TECHNOLOGY OF DIRECT RECOVERY ITmk3

2018 ◽  
pp. 32-37
Author(s):  
P.I. Loboda ◽  
Younes Razaz ◽  
S. Grishchenko
Keyword(s):  
Magnetic Properties ◽  
Cast Iron ◽  
Iron Content ◽  
Raw Materials ◽  
Direct Reduction ◽  
Processing Plant ◽  
High Iron Content ◽  
High Iron ◽  
Direct Restoration ◽  
First Time

Purpose. To substantiate the efficiency of processing hematite raw materials at the Krivoy Rog Mining and Processing Plant of Oxidized Ores using the direct reduction technology itmk3®. Metodology. Analysis of the results of the itmk3® direct restoration technology developed by Kobe Steel Ltd., Japan and Hares Engineering GmbX, Austria, with a view to using it to process Krivbass hematite ores into granulated iron (so-called “nuggets”). Findings. The involvement in the production of hematite ores (oxidized quartzite) of Krivbass with high iron content, but with low magnetic properties for their processing into granular cast iron is grounded. Originality. The use of itmk3® direct reduction technology from Kobe Steel Ltd., Japan and Hares Engineering GmbH, Austria for the processing of Krivbass hematite ores into granular cast iron is justified for the first time. Practical value. The efficiency of the use of hematite ores (oxidized quartzite) has been substantiated, which can significantly reduce the costs in the mining cycle for the economical production of metallurgical products.

PERSPECTIVE DEVELOPMENT OF WORLD PRODUCTION OF FEEDS FOR AQUACULTURE: ALTERNATIVE SOURCES OF RAW MATERIALS

2017 ◽  
pp. 67-78
Author(s):  
Lina Yurievna Lagutkina
Keyword(s):  
Raw Materials ◽  
Limiting Factors ◽  
Current Status ◽  
Feed Production ◽  
The World ◽  
Market Trends ◽  
Alternative Sources ◽  
World Industry ◽  
First Time ◽  
A Current

The author of the article discloses the prospects of development of the world feed production for aquaculture based on the analysis of key innovative technological and market trends. The author specifies that shortage, high cost, low ecological compatibility of traditional raw materials - fish flour - are among major limiting factors in the development of production of feeds for aquaculture. This fact, in turn, limits sustainable development of aquaculture both in Russia, and in the world in general. The article presents the overview of a current status of the world industry of feed production in aquaculture, where the regional situation is studied, as well. For the first time, there is given the outlook of innovative technologies in feed production based on the alternative sources of protein (on the example of projects of leading aquabiotechnological companies) which will determine industry’s objectives for the mid-term perspective.

Professional pathology in the production of aluminum in the Kola Arctic

2020 ◽  
pp. 767-767
Author(s):  
S. A. Syurin ◽  
S. A. Gorbanev
Keyword(s):  
Working Conditions ◽  
Occupational Diseases ◽  
Scientific Explanation ◽  
Marked Decrease ◽  
The Arctic ◽  
Aluminium Production ◽  
First Time

In 2007-2017, 22 occupational diseases were diagnosed for the first time in 18 workers engaged in aluminium production in the Arctic. A marked decrease in occupational morbidity in 2010-2017 was found, which was not associated with changes in working conditions and therefore requires an appropriate scientific explanation.

Safety assessment of biological raw materials in the system of medicines quality assurance

2020 ◽  
pp. 63-72
Author(s):  
Yu. Olefir ◽  
E. Sakanyan ◽  
I. Osipova ◽  
V. Dobrynin ◽  
M. Smirnova ◽  
...  
Keyword(s):  
Raw Materials ◽  
State Level ◽  
The State ◽  
Spongiform Encephalopathy ◽  
Safety Standards ◽  
Wide Range ◽  
The Russian Federation ◽  
Key Aspects ◽  
First Time ◽  
Medicines Quality

The entry of a wide range of biotechnological products into the pharmaceutical market calls for rein-forcement of the quality, efficacy and safety standards at the state level. The following general monographs have been elaborated for the first time to be included into the State Pharmacopoeia of the Russian Federation, XIV edition: "Viral safety" and "Reduction of the risk of transmitting animal spongiform encephalopathy via medicinal products". These general monographs were elaborated taking into account the requirements of foreign pharmacopoeias and the WHO recommendations. The present paper summarises the key aspects of the monographs.

Comparative analysis of essential oil obtained from fresh and dried leaves of medicinal sage

2020 ◽  
pp. 39-53
Author(s):  
Tatyana Shcheglova
Keyword(s):  
Comparative Analysis ◽  
Essential Oil ◽  
Raw Materials ◽  
Quantitative Difference ◽  
Botanical Garden ◽  
Component Composition ◽  
Gas Chromatography Mass Spectrometry ◽  
Qualitative And Quantitative ◽  
Salvia Officinalis L ◽  
Medical University

The article presents results of the study of a comparative analysis of essential oil obtained from fresh and dried leaves of medicinal sage (Salvia officinalis L.), growing in the Botanical Garden of the First Moscow State Medical University named after Sechenov. The studies were carried out using gas chromatography– mass spectrometry. Qualitative and quantitative difference in the component composition of the essential oil obtained from fresh and dried raw materials was determined as a result of the study.

Material costs in productural productivity structure: world trends and impact on development of the domestic economy

2019 ◽  
Vol 39 (2) ◽  
pp. 196-205
Author(s):  
N. V. Firov
Keyword(s):  
Economic Development ◽  
Comparative Analysis ◽  
Natural Resources ◽  
National Economy ◽  
Raw Materials ◽  
The State ◽  
Domestic Economy ◽  
Western Countries ◽  
Material Costs

A comparative analysis of the prices of raw materials, fuel, electricity in Russia and Western countries, the dynamics of their growth and impact on the national economy. It is shown that in the interests of the country's economic development and improving the welfare of the population, it is necessary to use its natural resources more effectively, to pursue a more stringent and at the same time balanced policy to curb the growth of prices, taking into account the interests of the state and business.

Intuitionistic fuzzy two-factor variance analysis of movie ticket sales

2021 ◽  
pp. 1-11
Author(s):  
Velichka Traneva ◽  
Stoyan Tranev
Keyword(s):  
Comparative Analysis ◽  
Real Data ◽  
Intuitionistic Fuzzy Sets ◽  
Real Numbers ◽  
Data Set ◽  
Important Method ◽  
Ticket Sales ◽  
Intuitionistic Fuzzy ◽  
The One ◽  
First Time

Analysis of variance (ANOVA) is an important method in data analysis, which was developed by Fisher. There are situations when there is impreciseness in data In order to analyze such data, the aim of this paper is to introduce for the first time an intuitionistic fuzzy two-factor ANOVA (2-D IFANOVA) without replication as an extension of the classical ANOVA and the one-way IFANOVA for a case where the data are intuitionistic fuzzy rather than real numbers. The proposed approach employs the apparatus of intuitionistic fuzzy sets (IFSs) and index matrices (IMs). The paper also analyzes a unique set of data on daily ticket sales for a year in a multiplex of Cinema City Bulgaria, part of Cineworld PLC Group, applying the two-factor ANOVA and the proposed 2-D IFANOVA to study the influence of “ season ” and “ ticket price ” factors. A comparative analysis of the results, obtained after the application of ANOVA and 2-D IFANOVA over the real data set, is also presented.

Sign in / Sign up

Export Citation Format

Share Document