scholarly journals NILAI ORGANOLEPTIK BAKSO IKAN LAYANG (Decapterus russelli), IKAN KUNIRAN (Upeneus moluccensis) DAN IKAN NILA (Oreochromis niloticus)

2020 ◽  
Vol 6 (2) ◽  
pp. 67-72
Author(s):  
Thania Kahiking ◽  
Novalina Maya Sari Ansar ◽  
Eko Cahyono
Keyword(s):  
Oreochromis Niloticus ◽  
Raw Materials ◽  
Raw Material ◽  
Fish Meat ◽  
Bone Removal ◽  
Removal Process ◽  
Materials Used ◽  
Soluble Components ◽  
Myofibril Protein

Bakso ikan merupakan produk berbahan dasar dari surimi yang terbuat dari lumatan daging ikan yang telah mengalami proses penghilangan tulang, dan sebagian komponen larut air dan lemak melalui pencucian dengan air, sehingga disebut sebagai konsentrat basah protein myofibril dari daging ikan layang, kuniran, dan nila. Tujuan penelitian adalah untuk mengetahui mutu bakso dari berbagai jenis daging ikan yang digunakan. Metode yang digunakan dalam penelitian ini adalah eksperimental. Hasil uji ogranoleptik menunjukkan bakso dengan kategori-kategori berikut, kenampakan terbaik pada ikan nila (8,2), bau terbaik dari ikan kuniran (7,8), rasa terbaik pada ikan layang (8,8) dan tekstur terbaik pada ikan layang (8,8). Kesimpulan dari ketiga jenis bahan baku yang digunakan ikan kuniran merupakan bahan baku terbaik dalam pembuatan bakso.   Fish ball is a surimi-based product made from ground fish meat that has undergone a bone removal process as well as elimination of water and fat soluble components through washing with water. Hence, it is called wet concentrated myofibril protein mainly derived from mackerel scad, goldband goatfish, and tilapia meat. The objective of this research was to determine the quality of fish balls from various types of fish (mackerel scad, mac). Organoleptic tests showed that the best appearance, smell, taste and texture categories were found in tilapia (8.2), goatfish (7.8), mackerel scad (8.8), and mackerel scad (8.8) respectively. As a conclusion, of the three raw materials used in this research, goldband goatfish proved to be the best source of raw material for fish balls.

scholarly journals Effect of washing time and storage of raw Material on Surimi and Kamaboko of Tilapia (Oreochromis sp.)

2020 ◽  
Vol 7 (3) ◽  
pp. 89
Author(s):  
Eka Saputra
Keyword(s):  
Water Content ◽  
Raw Materials ◽  
Frozen Storage ◽  
Storage Period ◽  
Raw Material ◽  
Minced Fish ◽  
Materials Used ◽  
And Storage

This study aim was to determine the effect of washing and raw materials on frozen storage on the quality of surimi and kamaboko from raw material of tilapia (Oreochromis sp). There were three types of raw materials used, namely minced fish, surimi, and surimi with addition of sorbitol, with three washing treatments and four weeks frozen storage period observed every week. The method used consisted of measurements of pH, water content, bite test, and folding test. Then the results obtained for the best kamaboko tilapia (Oreochromis sp) were obtained from fillet raw materials compared to the raw material of Minced fish and raw materials of Minced Fish + Sorbitol, with a frequency of washing once and frozen storage for 3 weeks.

Effectiveness of a Lactobacillus sakei Starter Culture in the Reduction of Biogenic Amine Accumulation as a Function of the Raw Material Quality

2001 ◽  
Vol 64 (3) ◽  
pp. 367-373 ◽  
Author(s):  
SARA BOVER-CID ◽  
MARIA IZQUIERDO-PULIDO ◽  
M. CARMEN VIDAL-CAROU
Keyword(s):  
Biogenic Amine ◽  
Dry Matter ◽  
Raw Materials ◽  
Starter Culture ◽  
Raw Material ◽  
Lactobacillus Sakei ◽  
Hygienic Quality ◽  
Fermented Sausages ◽  
Materials Used

The effectiveness of an amine-negative starter culture (Lactobacillus sakei CTC494) in the reduction of biogenic amine production during the ripening of fermented sausages was examined. Four batches were manufactured in parallel:spontaneously fermented and starter-mediated sausages were manufactured from two lots of raw materials of different hygienic quality. Besides the biogenic amine contents, changes in the microbial counts, nitrogenous fractions, pH, and water content were measured at several sampling points during the ripening process. In sausages manufactured from good quality meat, the starter strain of L. sakei reduced and even inhibited biogenic amine accumulation during sausage fermentation, the end products showing extremely low biogenic amine contents (tyramine levels less than 15 mg/kg of dry matter and putrescine and cadaverine levels less than 5 mg/kg of dry matter). Nevertheless, starter-mediated sausages made from poorer-quality raw materials showed much higher amine contents (308, 223, and 36 mg/kg of dry matter of cadaverine, tyramine, and putrescine, respectively), which were only slightly lower than those of the spontaneously fermented sausages made from the same raw materials. The relatively high bacterial numbers of raw materials of poorer-hygienic quality diminished the beneficial effect of the starter strain. Therefore, the effectiveness of the starter was strongly dependent on the hygienic quality of the raw materials used.

Impact of Raw Material Quality on Performance of Mixing and Charging Machines in Drilling and Blasting Operations

2021 ◽  
pp. 69-73
Author(s):  
T.S. Morozova
Keyword(s):  
Diesel Fuel ◽  
Raw Materials ◽  
Raw Material ◽  
Production Facility ◽  
High Quality ◽  
Equipment Failures ◽  
Hazardous Production ◽  
Materials Used ◽  
Incoming Inspection

A study into the failure causes of mixing and charging equipment confirms that the main impact on the probability of accidents is the use of raw materials that do not meet the specifications and have unstable properties. The raw materials used for explosives preparation in mechanized charging of boreholes include such components as ammonium nitrate, emulsion phase, diesel fuel, emulsifier and others. The paper describes the application of various formulations with these components in specific types of mixing and charging machines manufactured by AZOTTECH LLC. The main properties that affect the quality of raw materials are summarised, and the incoming inspection of explosive components is described as part of the acceptance procedure at temporary storage sites at a hazardous production facility. The paper describes common types of equipment failures and maintenance procedures when using substandard raw materials. The conclusion highlights the key practices to improve the equipment uptime as well as recommendations for incoming inspection and the use of high-quality explosive components.

scholarly journals Exploring Small and Medium Scale Manufacturing Firms and Quality Management of Medicinal Material Supply in a Developing Economy: The Ghanaian Perspective

2021 ◽  
Vol 8 (1) ◽  
pp. 1-12
Author(s):  
Juliet Twumasi ◽  
Evans Kyeremeh ◽  
Benedict Owusu Yankeyera
Keyword(s):  
Herbal Medicine ◽  
Raw Materials ◽  
Raw Material ◽  
Exploratory Research ◽  
Developing Economy ◽  
Medicinal Products ◽  
Medium Scale ◽  
Material Supply ◽  
Materials Used

The quality of herbs used to make herbal medicinal products largely influences the safety and effectiveness of these herbal treatments. It is therefore important to investigate the extent to which manufacturers are ensuring the quality supply of herbal medicine used in production of herbal medicine. This study examines how small and medium scale manufacturers assure the quality and continual improvement of the raw materials (raw materials) used for production of medicinal products in a developing economy, the state of Ghana, and the methods used by the company. The study adopted exploratory research design. Using interview quide with open ended questions, data was collected from 88 respondents (small and medium scale manufacturers and their representatives). The data was analysed using NVivo 11. Findings of the study indicated that herbs were collected from the wild (forest), physical inspection of the herbs and best manufacturing practices, good relationship management or collaboration were measures used to promote quality of raw material supply. Also, proper documentation or recording of processes and quality measures do not have much attention or acceptance among Traditional Medicine Practitioners (TMPs).

The influence of the type of nut raw materials on the processes of migration of fats in glazed candies with pralin bodies

2021 ◽  
pp. 46-49
Author(s):  
Николай Борисович Кондратьев ◽  
Лариса Валентиновна Зайцева ◽  
Оксана Сергеевна Руденко ◽  
Егор Валерьевич Казанцев ◽  
Ирина Александровна Белова
Keyword(s):  
Material Properties ◽  
Migration Rate ◽  
Storage Temperature ◽  
Raw Materials ◽  
The Body ◽  
Raw Material ◽  
Specific Rate ◽  
Butter Substitute ◽  
Materials Used

Целью исследования являлось изучение влияния свойств орехового сырья на направление и скорость процессов миграции жиров в глазированных конфетах с пралиновыми корпусами. Исследование процессов миграции жиров между корпусом и глазурью в процессе хранения необходимо для прогнозирования сохранности и предотвращения органо-лептической порчи в результате осветления или умягчения глазури, а также «поседения» поверхности изделий. Предложен подход прогнозирования скорости процессов миграции жиров при хранении конфет с корпусами, изготовленными на основе орехового сырья, с использованием удельной скорости миграции жиров. Исследованы процессы миграции жиров в модельных образцах конфет с пралиновыми корпусами на основе арахиса, фундука, кешью, миндаля, покрытых глазурью с использованием заменителя масла какао лауринового типа при температуре хранения 18 °С. Показано, что удельная скорость миграции олеиновой кислоты на поверхность модельных образцов глазированных конфет с корпусами на основе арахиса превышает скорость миграции в конфетах с корпусами на основе кешью приблизительно в 20 раз. Полученные закономерности позволяют установить дополнительные требования к качеству используемого жирового сырья для уменьшения скорости миграции жиров. The aim of the work - the investigation of the influence of nut raw material properties on the direction and speed of fat migration processes in glazed sweets with praline cases. The study of fat migration processes between the body and the glaze during storage is necessary to predict the safety and prevent organoleptic spoilage as a result of lightening or softening of the glaze, as well as «graying» of the surface of the products. An approach to predicting the rate of fat migration processes during the storage of sweets with cases made on the basis of nut raw materials using the specific rate of fat migration is proposed. The processes of fat migration in model samples of sweets with praline cases based on peanuts, hazelnuts, cashews, almonds, glazed with glaze, with the use of a lauric-type cocoa butter substitute were investigated at a storage temperature of 18 °C. It is shown that the specific rate of migration of oleic acid to the surface of model samples of glazed sweets with peanut-based cases exceeds the migration rate in sweets with cashew-based cases by approximately 20 times. The obtained regularities allow us to establish additional requirements for the quality of the fat raw materials used to reduce the rate of fat migration.

scholarly journals Physical-ceramic characterization of clays used in the manufacture of mansory products for construction

Respuestas ◽  
2018 ◽  
Vol 23 (2) ◽  
pp. 12-21
Author(s):  
Ricardo Andrés García León ◽  
Eder Norberto Flórez Solano ◽  
Carlos Humberto Acevedo Peñaloza
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Current Standard ◽  
The North ◽  
North Eastern ◽  
Materials Used ◽  
A Company ◽  
Standard Techniques

Nowadays, in Colombia, specifically in the north-eastern, in Santander region, the process of mixing the ceramic paste used to manufacture masonry products for construction (H- 10 bricks, tiles, roof tiles, etc.) is done manually. For this reason, approximately 70% of the companies do not possess the technological tools which facilitate the prediction of the behavior of the raw material (clay). The main objective of this research is to formulate mixtures at a laboratory-level in order to verify the physical properties of ceramic raw materials used by a company which was takenas a sample. The research development was carried out through the execution of tests and laboratory analysis, taking into account the formulation of mixtures with the help of Statgraphics Centurion XV software in order to obtain combinations of raw materials according to the requirements of the current standard techniques. The results demonstrate the importance of using statistical programs for the improvement of systems and processes, predicting the behavior of raw materials as well as conducting pilot tests, taking into account the laboratory analyses in the ceramic industry. Conclusions: The results show that the mixture combinations obtained have the necessary parameters to meet the current standards such as resistance and absorption, which will optimize the economic and physical resources of the company, as well as the quality of the final product.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

scholarly journals Bio-Based Alternatives to Phenol and Formaldehyde for the Production of Resins

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2237 ◽  
Author(s):  
P. R. Sarika ◽  
Paul Nancarrow ◽  
Abdulrahman Khansaheb ◽  
Taleb Ibrahim
Keyword(s):  
Raw Materials ◽  
Phenol Formaldehyde ◽  
Raw Material ◽  
Wood Industry ◽  
Suitable Material ◽  
The Past ◽  
Wide Range ◽  
Recent Developments ◽  
Sustainable Materials ◽  
Materials Used

Phenol–formaldehyde (PF) resin continues to dominate the resin industry more than 100 years after its first synthesis. Its versatile properties such as thermal stability, chemical resistance, fire resistance, and dimensional stability make it a suitable material for a wide range of applications. PF resins have been used in the wood industry as adhesives, in paints and coatings, and in the aerospace, construction, and building industries as composites and foams. Currently, petroleum is the key source of raw materials used in manufacturing PF resin. However, increasing environmental pollution and fossil fuel depletion have driven industries to seek sustainable alternatives to petroleum based raw materials. Over the past decade, researchers have replaced phenol and formaldehyde with sustainable materials such as lignin, tannin, cardanol, hydroxymethylfurfural, and glyoxal to produce bio-based PF resin. Several synthesis modifications are currently under investigation towards improving the properties of bio-based phenolic resin. This review discusses recent developments in the synthesis of PF resins, particularly those created from sustainable raw material substitutes, and modifications applied to the synthetic route in order to improve the mechanical properties.

scholarly journals Analysis of Quality of Backyard Compost and Its Potential Utilization as a Circular Bio-Waste Source

2021 ◽  
Vol 11 (10) ◽  
pp. 4392
Author(s):  
Apolka Ujj ◽  
Kinga Percsi ◽  
Andras Beres ◽  
Laszlo Aleksza ◽  
Fernanda Ramos Diaz ◽  
...  
Keyword(s):  
Crop Production ◽  
Basic Education ◽  
Raw Materials ◽  
Nutrient Content ◽  
Quality Analysis ◽  
Weed Seed ◽  
Quality Properties ◽  
Seed Dispersion ◽  
Materials Used

The use and quality analysis of household compost have become very important issues in recent years due to the increasing interest in local food production and safe, self-produced food. The phenomenon was further exacerbated by the COVID-19 pandemic quarantine period, which gave new impetus to the growth of small home gardens. However, the knowledge associated with making high-quality compost is often lacking in home gardeners. Therefore, the objective of this research was to find answers to the following questions: can the quality of backyard compost be considered safe in terms of toxicity and nutrient content? Can weed seed dispersion affect the usability of backyard compost? In general, can the circulation of organic matter be increased with the spread of home composting? In this study, 16 different house composts were analysed for stability, weed seed contamination, toxic elements, and nutrient content using analysis of variance. The results of the research showed that the quality properties of the composts (including their weed seed dispersion effect) were greatly influenced by the different techniques and raw materials used. The toxicity levels, as well as the content of macro and microelements, were within the parameters of safe-quality compost. The specific macronutrient (Ca, Mg) and micronutrient (Fe, Mn) contents of the tested composts have a similar and, in some cases, more favorable nutrient supply capacity in crop production than the frequently-used cow manure-based composts. With a plan of basic education on composting, there is potential to encourage farmyard composting.

scholarly journals A Methodology Based on FT-IR Data Combined with Random Forest Model to Generate Spectralprints for the Characterization of High-Quality Vinegars

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1411
Author(s):  
José Luis P. Calle ◽  
Marta Ferreiro-González ◽  
Ana Ruiz-Rodríguez ◽  
Gerardo F. Barbero ◽  
José Á. Álvarez ◽  
...  
Keyword(s):  
Random Forest ◽  
Raw Materials ◽  
Principal Component ◽  
Hierarchical Cluster ◽  
Raw Material ◽  
Support Vector ◽  
Protected Designation Of Origin ◽  
Ft Ir

Sherry wine vinegar is a Spanish gourmet product under Protected Designation of Origin (PDO). Before a vinegar can be labeled as Sherry vinegar, the product must meet certain requirements as established by its PDO, which, in this case, means that it has been produced following the traditional solera and criadera ageing system. The quality of the vinegar is determined by many factors such as the raw material, the acetification process or the aging system. For this reason, mainly producers, but also consumers, would benefit from the employment of effective analytical tools that allow precisely determining the origin and quality of vinegar. In the present study, a total of 48 Sherry vinegar samples manufactured from three different starting wines (Palomino Fino, Moscatel, and Pedro Ximénez wine) were analyzed by Fourier-transform infrared (FT-IR) spectroscopy. The spectroscopic data were combined with unsupervised exploratory techniques such as hierarchical cluster analysis (HCA) and principal component analysis (PCA), as well as other nonparametric supervised techniques, namely, support vector machine (SVM) and random forest (RF), for the characterization of the samples. The HCA and PCA results present a clear grouping trend of the vinegar samples according to their raw materials. SVM in combination with leave-one-out cross-validation (LOOCV) successfully classified 100% of the samples, according to the type of wine used for their production. The RF method allowed selecting the most important variables to develop the characteristic fingerprint (“spectralprint”) of the vinegar samples according to their starting wine. Furthermore, the RF model reached 100% accuracy for both LOOCV and out-of-bag (OOB) sets.

Sign in / Sign up

Export Citation Format

Share Document