ESTABLISHING OF THE SPATIAL DISTRIBUTION OF DISPOSABLE GROUNDWATER RESOURCES BY MULTI-CRITERIA ANALYSIS METHOD

2018 ◽  
Vol 471 ◽  
pp. 137-146
Author(s):  
Andrzej RODZOCH ◽  
Dominik MIAZ ◽  
Grzegorz JELENIEWICZ
Keyword(s):  
Mathematical Model ◽  
Spatial Distribution ◽  
Model Simulation ◽  
Groundwater Resources ◽  
Analysis Method ◽  
Control Data ◽  
Output Control ◽  
Input And Output ◽  
Management Area

A hydrogeologist often faces a serious difficulty in estimation of available groundwater resources. In contrast to renewable water resources, which are valuable for a study area and estimated with greater or lower precision depending on the quality of available data, disposable groundwater resources cannot be treated as a natural and relatively constant characteristic of the management area, because their size and spatial distribution depend on criteria assumed to set an optimal way for managing water supplies. Since those criteria can be defined in various ways and their significance can vary as well, spatial distribution of groundwater resources and their size can theoretically have infinite number of equally correct solutions. They can be only treated as optimal for a strictly specified set of criteria and therefore can be modified according to different needs and assumed priorities. Interpreted this way, they can only be calculated by the use of model simulation, because only a mathematical model is an effective tool for making such multi-criteria analyses. The paper presents an approach for setting criteria that limit the input and output control data, applied by HYDREKO in the process of spatial distribution of disposable groundwater resources. An example of use of this method is presented for the management area P-XVIII Dolna Warta (Rodzoch et al., 2017).

Analisa Pengukuran Efisiensi Dengan Metode Data Envelopment Analysis (Dea) Di Heaven Store Surabaya Barat

2017 ◽  
Vol 1 (1) ◽  
pp. 44
Author(s):  
Satya Swesty Widiyana ◽  
Rus Indiyanto
Keyword(s):  
Mathematical Model ◽  
Data Envelopment Analysis ◽  
Customer Satisfaction ◽  
Customer Service ◽  
Data Envelopment ◽  
Input And Output ◽  
Using Data ◽  
Measurement Efficiency ◽  
The Mathematical Model

ABSTRACTThis study was taken from the problems in Heaven Store ranging from turnover does not reach the target, the different display products for each branch, and a just few reference customer visiting from problems in customer satisfaction. because the values of input and output obtained from each branch has a different values so demanding customers Heaven Store to correct weaknesses in the efficiency of customer service and satisfaction, then we tried to respond to the challenges of these improvements to the study "Analysis of Measurement Efficiency Services Methods Data envelopment analysis (DEA) In Heaven Store in West Surabaya "So in this study, researchers will assist the managementHeaven Store for measuring the level of efficiency that Heaven store along 5th branches can improve the quality of service by using data envelopment analysis (DEA), which is a methods that determine the level of efficiency similar organization where efficiency is not determined by the organization concerned. It is hoped this analysis will help the management to withdraw the customer so that the customer can buy the products that are sold in Heaven Store. After calculation of the mathematical model by referring to the calculation of the mathematical model DEA CRS, obtained the efficiency 0.8479688 on the fifth branch Heaven Store, then after an improvement in input and output according to the reference fixes the target model of DEA CRS, then the value of the relative efficiency DMU 5 can be increased from 0.8479688 (inefficient) to 1.000000 (efficient). Keywords: Data Envelopment Analysis, customer satisfaction, efficiency

scholarly journals USE OF PEDAGOGICAL TEACHING TECHNOLOGIES IN PRACTICAL WORK ON CHEMISTRY

2021 ◽  
pp. 65-72
Author(s):  
Ирина Анатольевна Шабанова ◽  
Светлана Владимировна Ковалёва
Keyword(s):  
Traditional Approach ◽  
Test Tube ◽  
Practical Work ◽  
Output Control ◽  
Knowledge And Skills ◽  
Input And Output ◽  
Modular Technology ◽  
Main Components ◽  
Chemical Experiment

Охарактеризован традиционный подход к методике проведения практических работ по химии и выделены его компоненты. Обосновано использование блочно-модульной технологии обучения при проведении химического эксперимента, дана ее характеристика. Описано содержание модульной карты, состоящей из учебных элементов, включающих инструкцию к практической работе, источники учебного материала, вопросы и задания, входной и выходной контроль знаний и умений. Приведен пример модульной карты для практической работы в 11-м классе. Показаны методические возможности использования кейсов и кроссенсов как средств контроля знаний, их особенности для химического эксперимента. Приведены примеры кейса и кроссенса. Представлены результаты анкетирования обучающихся с целью выявления их отношения к работе с модульными картами, кейсами и кроссенсами. The traditional approach to the method of carrying out practical work in chemistry is characterized and its main components are identified. The use of block-modular teaching technology in conducting a chemical experiment has been substantiated. A characteristic of block-modular technology is given, the content of a modular map, consisting of educational elements reflecting the content of practical work in chemistry, sources of educational material, questions and tasks, input and output control of knowledge and skills, is described. The functions of educational elements in the module are highlighted, which allow organizing the experimental activity of students. An example of a modular card for practical work in chemistry in grade 11 is given. The methodological possibilities of using cases as one of the unconventional means of input and output control of knowledge and skills, their features for a chemical experiment are described, an example of a case is given. The characteristic is given to crossenсes as elements of the game technology of teaching, which are used to control the quality of mastering the content of practical work. An example of crossenсe to the experiment “Obtaining hydrogen in a test tube” is presented. The results of a survey of schoolchildren in order to identify their attitude to work with modular cards, cases and crossenсes are presented. It was found that the majority of respondents reacted positively to the use of these didactic materials in practical work in chemistry.

Lithography below 100 nm

1983 ◽  
Vol 41 ◽  
pp. 96-99
Author(s):  
L. D. Jackel
Keyword(s):  
Spatial Distribution ◽  
Electron Beam ◽  
Electron Scattering ◽  
Electron Beam Lithography ◽  
Substrate Material ◽  
Local Electron ◽  
Electron Dose ◽  
Positive Resist ◽  
Exposure Process

Most production electron beam lithography systems can pattern minimum features a few tenths of a micron across. Linewidth in these systems is usually limited by the quality of the exposing beam and by electron scattering in the resist and substrate. By using a smaller spot along with exposure techniques that minimize scattering and its effects, laboratory e-beam lithography systems can now make features hundredths of a micron wide on standard substrate material. This talk will outline sane of these high- resolution e-beam lithography techniques.We first consider parameters of the exposure process that limit resolution in organic resists. For concreteness suppose that we have a “positive” resist in which exposing electrons break bonds in the resist molecules thus increasing the exposed resist's solubility in a developer. Ihe attainable resolution is obviously limited by the overall width of the exposing beam, but the spatial distribution of the beam intensity, the beam “profile” , also contributes to the resolution. Depending on the local electron dose, more or less resist bonds are broken resulting in slower or faster dissolution in the developer.

The effect of pressure on the compressibility of aluminum alloys

2020 ◽  
pp. 102-107
Keyword(s):  
Mechanical Properties ◽  
Mathematical Model ◽  
Liquid Metal ◽  
Control Systems ◽  
Physical And Mechanical Properties ◽  
Reliable Data ◽  
Output Process ◽  
Automated Control ◽  
Input And Output ◽  
Crystallization Under Pressure

To obtain reliable data on the properties of liquid metal and create automated control systems, the technological process of molding with crystallization under pressure is studied. A mathematical model of the input and output process parameters is developed. It is established that the compressibility of the melt can represent the main controlled parameter influencing on the physical-mechanical properties of the final products. The obtained castings using this technology are not inferior in their physical and mechanical properties to those produced by forging or stamping.

Multifactor mathematical model of criticality of welding process of products from aluminum- magnesium alloys

2020 ◽  
pp. 12-18
Author(s):  
F.A. Urazbahtin ◽  
A.YU. Urazbahtina
Keyword(s):  
Mathematical Model ◽  
Magnesium Alloy ◽  
Magnesium Alloys ◽  
Welding Process ◽  
Welding Equipment ◽  
Equipment Operation ◽  
Aluminum Magnesium Alloys ◽  
Aluminum Magnesium Alloy ◽  
Welding Materials

A multifactor mathematical model of the welding process of products from aluminum-magnesium alloys, consisting of 71 indicators that assess the quality of the weld, the welding process, costs, equipment operation and quality of the welded material. The model can be used to control and optimize the welding process of products from aluminum-magnesium alloys. Keywords welding, products, aluminum-magnesium alloy, indicators, process parameters, welding equipment, welding materials, electrode sharpening, lining [email protected]

Network analysis models – the secret for success

2004 ◽  
Vol 4 (5-6) ◽  
pp. 383-388
Author(s):  
D.M. Rogers
Keyword(s):  
Mathematical Model ◽  
Field Data ◽  
Essential Element ◽  
Distribution Networks ◽  
Automatic Calibration ◽  
Supply And Distribution ◽  
The World ◽  
Optimum Approach ◽  
Analysis Models

Water is a fundamental necessity of life. Yet water supply and distribution networks the world over are old and lacking in adequate maintenance. Consequently they often leak as much water as they deliver and provide an unacceptable quality of service to the customer. In certain parts of the world, water is available only for a few hours of the day. The solution is to build a mathematical model to simulate the operation of the real network in all of its key elements and apply it to optimise its operation. To be of value, the results of the model must be compared with field data. This process is known as calibration and is an essential element in the construction of an accurate model. This paper outlines the optimum approach to building and calibrating a mathematical model and how it can be applied to automatic calibration systems.

scholarly journals Two-Dimensional Sampling-Recovery Algorithm of a Realization of Gaussian Processes on the Input and Output of Linear Systems

Entropy ◽  
2020 ◽  
Vol 22 (10) ◽  
pp. 1079
Author(s):  
Vladimir Kazakov ◽  
Mauro A. Enciso ◽  
Francisco Mendoza
Keyword(s):  
Gaussian Processes ◽  
Research Method ◽  
General Algorithm ◽  
Two Dimensional ◽  
Recovery Algorithm ◽  
Conditional Mean ◽  
Quality Of Recovery ◽  
Input And Output ◽  
Statistical Relationships

Based on the application of the conditional mean rule, a sampling-recovery algorithm is studied for a Gaussian two-dimensional process. The components of such a process are the input and output processes of an arbitrary linear system, which are characterized by their statistical relationships. Realizations are sampled in both processes, and the number and location of samples in the general case are arbitrary for each component. As a result, general expressions are found that determine the optimal structure of the recovery devices, as well as evaluate the quality of recovery of each component of the two-dimensional process. The main feature of the obtained algorithm is that the realizations of both components or one of them is recovered based on two sets of samples related to the input and output processes. This means that the recovery involves not only its own samples of the restored realization, but also the samples of the realization of another component, statistically related to the first one. This type of general algorithm is characterized by a significantly improved recovery quality, as evidenced by the results of six non-trivial examples with different versions of the algorithms. The research method used and the proposed general algorithm for the reconstruction of multidimensional Gaussian processes have not been discussed in the literature.

Numerical Simulation on Mold Electromagnetic Eccentric Stirring and Central Segregation of Round Bloom

2013 ◽  
Vol 652-654 ◽  
pp. 2450-2454
Author(s):  
Zhi Hong Zhang ◽  
Guo Guang Cheng
Keyword(s):  
Numerical Simulation ◽  
Mathematical Model ◽  
Electromagnetic Stirring ◽  
Center Line ◽  
Central Segregation

The paper describes multi-section round bloom casting using external MEMS, equipped with max section D600mm and min D280mm mold, the center line of D280mm mold not coincident with the axis of stirrer coils. it is exist eccentric electromagnetic stirring of mold which section less than max D600mm, a mathematical model of MEMS has been established, the index of central segregation of D280mm macrostructure had decreased less than 1.12 by optimized parameters of electromagnetic stirring and SEN immerse depth, in the end, the quality of round bloom had improved.

scholarly journals Physicochemical evolution and evaluation of groundwater quality in Mougheul area (Southwest of Algeria)

2021 ◽  
Vol 11 (2) ◽  
Author(s):  
Saliha Mebarki ◽  
Benali Kharroubi ◽  
Mohammed Amin Kendouci
Keyword(s):  
Physicochemical Parameters ◽  
Calcium Sulfate ◽  
Major Ions ◽  
Groundwater Resources ◽  
Triangular Diagram ◽  
Wilcox Diagram ◽  
Calcium And Magnesium ◽  
Increasing Demand ◽  
Pressure On Water Resources

AbstractIn arid areas, the pressure on water resources and in particular on groundwater resources is on the rise, mainly due to increasing demand and the deterioration of water quality. In this context, the present work aims to follow the annual evolution, between 2009 and 2019 of the physicochemical parameters, and to evaluate the quality of groundwater of the region of Mougheul, by determining the data of pH, TDS, conductivity and the concentrations of major ions ( Ca+2, Mg+2, Na+, K+, Cl−, HCO3−, SO4−2, NO3−) of 07 water points. The results revealed that all the levels of the physicochemical parameters do not exceed the WHO potability standards, except high values were observed at the level of well W6 which exceeds the limits recommended by the WHO (50 mg /l). The diagram of Schöeller and Berkaloff shows that the groundwater has the bicarbonate magnesium facies. The representation of the data on the Piper triangular diagram shows that W6 has the facies chlorinated and calcium sulfate and magnesium and the other water points have the facies bicarbonate calcium and magnesium. SAR values show that the groundwater of Mougheul is excellent for irrigation. The classification according to the Wilcox diagram shows that the groundwater of Mougheul in general is good quality, but the well of W6 water is suitable for irrigation and requires monitoring the evolution of salinity.

Sign in / Sign up

Export Citation Format

Share Document