Masked Accelerators and Instruction Set Extensions for Post-Quantum Cryptography

Side-channel attacks can break mathematically secure cryptographic systems leading to a major concern in applied cryptography. While the cryptanalysis and security evaluation of Post-Quantum Cryptography (PQC) have already received an increasing research effort, a cost analysis of efficient side-channel countermeasures is still lacking. In this work, we propose a masked HW/SW codesign of the NIST PQC finalists Kyber and Saber, suitable for their different characteristics. Among others, we present a novel masked ciphertext compression algorithm for non-power-of-two moduli. To accelerate linear performance bottlenecks, we developed a generic Number Theoretic Transform (NTT) multiplier, which, in contrast to previously published accelerators, is also efficient and suitable for schemes not based on NTT. For the critical non-linear operations, masked HW accelerators were developed, allowing a secure execution using RISC-V instruction set extensions. With the proposed design, we achieved a cycle count of K:214k/E:298k/D:313k for Kyber and K:233k/E:312k/D:351k for Saber with NIST Level III parameter sets. For the same parameter sets, the masking overhead for the first-order secure decapsulation operation including randomness generation is a factor of 4.48 for Kyber (D:1403k)and 2.60 for Saber (D:915k).

DESIGN OF FIR FILTER ALGORITHM FOR NOISE REMOVAL IN ECG SIGNAL USING OPEN CORE SoC

The emerging technology in computer architecture has led to the development of various ISAs depending on the needs of the desired technology, architectures, and processor cores. Instruction Set Architectures (ISAs) for processors from Intel, AMD, Intel, RISC-V, etc. This has provided the path to implement various functions on an open core SoC Platform. Among the many DSP applications, the FIR filter has been implemented on an open core SoC platform that uses RISCV. Here specifically filtering of noise from ECG signal. The performance cycle count has been obtained for the same and compared with its counterpart ARM M7 on the Keil platform.

Comparison of Lead-Acid and Li-Ion Batteries Lifetime Prediction Models in Stand-Alone Photovoltaic Systems

Several models for estimating the lifetimes of lead-acid and Li-ion (LiFePO4) batteries are analyzed and applied to a photovoltaic (PV)-battery standalone system. This kind of system usually includes a battery bank sized for 2.5 autonomy days or more. The results obtained by each model in different locations with very different average temperatures are compared. Two different locations have been considered: the Pyrenees mountains in Spain and Tindouf in Argelia. Classical battery aging models (equivalent full cycles model and rainflow cycle count model) generally used by researchers and software tools are not adequate as they overestimate the battery life in all cases. For OPzS lead-acid batteries, an advanced weighted Ah-throughput model is necessary to correctly estimate its lifetime, obtaining a battery life of roughly 12 years for the Pyrenees and around 5 years for the case Tindouf. For Li-ion batteries, both the cycle and calendar aging must be considered, obtaining more than 20 years of battery life estimation for the Pyrenees and 13 years for Tindouf. In the cases studied, the lifetime of LiFePO4 batteries is around two times the OPzS lifetime. As nowadays the cost of LiFePO4 batteries is around two times the OPzS ones, Li-ion batteries can be competitive with OPzS batteries in PV-battery standalone systems.

Modeling and calculation power saving modes grain drying materials under energy fields

Storing grain quality materials in post harvest handling and storage is largely dependent on correctly implemented the drying process. In agricultural production mainly use costly convection dryer. The main share of wasteful energy consumption accounts for heat drying agent, some heat is lost to the environment through the working surface of the dryers and spent coolant. Ways to reduce these energy costs is to reduce the amount of drying agent in the process to the level necessary to absorb and remove moisture from the dryer and the working volume of the principles of targeted "delivery" of energy to vysushuyemoho material. Last principles successfully implemented using contactless energy supply of electromagnetic fields in a material exposure by microwave or infrared radiation. The article deals with the theoretical background processes of drying material in cyclic mode with infrared heating and high frequency electromagnetic field. The equations change over time settings grain material by heating using high frequency electromagnetic field or infrared light and ventilation in the grain does not allow heated air drying cycle count process. The algorithm calculating the overall process of drying cycle to determine rational modes of the process, providing minimize energy costs. The article deals with the theoretical background processes of drying material in cyclic mode with infrared heating and high frequency electromagnetic field. The equations change over time settings grain material by heating using high frequency electromagnetic field or infrared light and ventilation in the grain does not allow heated air drying cycle count process. The algorithm calculating the overall process of drying cycle to determine rational modes of the process, providing minimize energy costs. The article deals with the theoretical background processes of drying material in cyclic mode with infrared heating and high frequency electromagnetic field. The equations change over time settings grain material by heating using high frequency electromagnetic field or infrared light and ventilation in the grain does not allow heated air drying cycle count process. The algorithm calculating the overall process of drying cycle to determine rational modes of the process, providing minimize energy costs. The equations change over time settings grain material by heating using high frequency electromagnetic field or infrared light and ventilation in the grain does not allow heated air drying cycle count process. The algorithm calculating the overall process of drying cycle to determine rational modes of the process, providing minimize energy costs. The equations change over time settings grain material by heating using high frequency electromagnetic field or infrared light and ventilation in the grain does not allow heated air drying cycle count process. The algorithm calculating the overall process of drying cycle to determine rational modes of the process, providing minimize energy costs.

Spin Retry Count Relation with Other hdd Parameters

The change of the SMART parameter 10 Spin retry count values depending on the operating time is considered; this parameter characterizes the number of repeated attempts to spin the disks up to operating speed if the first attempt was unsuccessful. This parameter is critical in the sense that if the value of the attribute increases, then the likelihood of malfunctions in the mechanical part of the hard disk drives is high. The scientific task of the study is to establish the relationship between this parameter in failed hard drives and the values of other reliability parameters for information stores from various manufacturers. In the course of the study, the drives of the HGST, Hitachi, Samsung, ST, Toshiba, WDC trademarks operated in the Backblaze largest commercial data centre were analysed. As a result of the analysis, the relationship between the specified parameter and such parameters as 3 Spin-up time (time of spinning the disk package from standstill to operating speed), 4 Start/stop count (counting the spindle start/stop cycles), 12 Power cycle count (number of full drive switching on/off cycles), 192 Power-off retract count (the number of shutdown cycles, including emergency), 193 Load cycle count (the number of magnetic head block moves in the parking zone/in working position cycles). It is shown that the nature of the change in the values of the considered parameters depends on the manufacturer of the hard drives. It is proposed to carry out an individual assessment of the information storage device rotation mechanism reliability using the parameters identified as a result of the study.

Fatigue Assessment of “Corroded” Mooring Chain

Assessment of corroded mooring chain for continued service is a challenging task faced by industry. Current best practice relies heavily on qualitative inspection information collected during inspection campaign. There has been little investigation into this practice and whether it is an appropriate technique or can be improved. To address this issue, the Fatigue of Corroded Mooring Chains (FoCCs) Joint Industry Project (JIP), initiated in 2016 with fifteen (15) participating organizations, including oil majors, chain manufactures, consulting firms, and classification societies, to examine assessment methods for evaluating remaining fatigue life. JIP teams were formed to progress fatigue testing and finite element objectives. One such team, comprised of ExxonMobil, ABS and Asian Star Anchor Chain, has performed an additional series of fatigue tests beyond the core JIP work effort. A fatigue test was conducted to 1) demonstrate the utility of finite element analysis in the assessment of fatigue life and 2) demonstrate performance of simulated damage. This unique fatigue test program was conducted on mooring chain with manufactured “corrosion pits” of different dimensions. All chain surface features were digitally recorded and converted into finite element models. These models were subsequently analyzed to compare with test results — both cycle count and failure location. This paper presents the findings from these fatigue tests and finite element analyses and how they can be utilized for assessment of remaining fatigue life.

Model-Based Investigation of Porosity Profiles in Graphite Anodes Regarding Sudden-Death and Second-Life of Lithium Ion Cells

The second-life concept helps to reduce the cost for electric vehicles by adding monetary value to disused automotive batteries. However, the sudden-death effect, a change in ageing behaviour limits the total lifetime and might reduce the second-life timespan. In this paper, we utilize a common pseudo two-dimensional (P2D) cell model to investigate the influence of different porosity profiles in the graphite electrode on the battery’s ageing. Ageing is modeled by two irreversible side reactions at the anode, the formation of solid electrolyte interface (SEI) and lithium plating. We use parameters of a high-energy cell with thick electrodes. A constant initial anode porosity as a reference is compared with two optimized porosity profiles. Simulation results show that by using a layered anode, a two-stage porosity profile with higher porosity at the separator side, the cycle count until sudden-death and especially the cycles for second-life applications can both almost be doubled.

Redundant-Signed-Digit-Based High Speed Elliptic Curve Cryptographic Processor

In this paper, a high speed elliptic curve cryptographic (ECC) processor for National Institute of Standards and Technology (NIST) recommended prime [Formula: see text] is proposed. The modular arithmetic components in the proposed ECC processor are highly optimized at both architectural level and circuit level. Redundant-signed-digit (RSD) arithmetic is adopted in the modular arithmetic components to avoid lengthy carry propagation delay. A high speed modular multiplier is designed based on an efficient segmentation and pipelining strategy. The clock cycle count is reduced as result of the segmentation, whereas operating frequency and throughput are significantly increased due to the pipelining. An optimized pipelined architecture for modular division is also presented which is suitable for the design of ECC processor using projective coordinates. The Joye’s double and add (DAA) algorithm based on [Formula: see text]-only common [Formula: see text] (co-[Formula: see text]) coordinate is adopted at the system level for its regular and efficient behavior. The proposed ECC processor is flexible and can be implemented using any field programmable gate array (FPGA) family or standard cell libraries. The proposed ECC processor executes a single elliptic curve (EC) point multiplication (PM) operation in 0.47[Formula: see text]ms at a maximum frequency of 327[Formula: see text]MHz on Virtex-6 FPGA. The implementation results demonstrate that the proposed ECC processor outperforms the other contemporary designs reported in the literature in terms of speed and [Formula: see text] metrics.

Fatigue Monitoring: Case Studies in Nuclear Power Plant

During design of Class I components in Nuclear Power Plants, cumulative usage factors (CUF) are conservatively calculated to estimate fatigue damage, and results must be below the limits of the applicable codes. Nevertheless, when these results are used to evaluate the possibility of using these components for an extended life, the results are frequently above code limits. Many Nuclear Power Plants have installed commercial fatigue monitoring systems at critical components in order to assess transient severity and cycle count for life extension fatigue calculations among other reasons. Since the commissioning of the system, unexpected operation modes and thermal stratification was discovered and evaluations needed to be done. Findings, interpretations and solving are presented in this paper.

Inventory control weaknesses – a case study of lubricant manufacturing company

Purpose For a manufacturing company, inventory control and management is crucial to ensure smooth production and sustainable sales performance, as well as preventing stockout that will result in customer switch to competitors. This paper aims to examine the effectiveness of cycle count activities, one of the inventory control tools to manage inventory. Beside, this study also wishes to identify any loopholes in practices and procedures in inventory control of companies. Design/methodology/approach One of the lubricant manufacturing companies in Malaysia was selected as a case study and mixed method data collection of document analysis and observation were used. The analysis and examination was conducted by using Committee of Sponsoring Organization of the Treadway Commission Framework 2013 as guidance. Findings This study found that problems in inventory control can be caused by inconsistency of practices due to incomplete or absent standard operating procedures. Furthermore, no segregation of duties and excessive reliance on one person to conduct many tasks will lead to human error and fraud. Research limitations/implications This paper enhances the theoretical understanding on the inventory control and management system applied in the manufacturing organization particularly. However, frequent changes of the management in the organization of the case study make the study difficult to obtain consistent information. Not all standard operating procedures were revised or updated and available for examination. In addition, some of the reports needed for investigation are confidential and requests to observe and scrutinize information from those documents are denied by the company. Thus, more in-depth analysis and verification on the issues of interest were unable to be conducted. Practical implications This study provides an indicator that cycle count activities need to be conducted frequently on a regular basis so that the physical inventory and recording system are accurate. Cycle count activities also must involves various related departments in the company in which regular training is essential to ensure employees are aware and understand their responsibility and accountability on the inventory. Originality/value This study is original as it focuses on the inventory control management of one of the largest lubricant manufacturing in Malaysia, particularly on cycle count activities which is scare in literature. Furthermore, the company allows research access to the documents and operations conducted in the company, which is usually difficult to obtain from many companies.