Probable Simulating Models of Wear for Open1 Gearing with High-Ratio Gear

2008 ◽  
pp. 387-395
Author(s):  
Alexander Golovin ◽  
Tamara Milevskaya
Keyword(s):  
High Ratio

Confidentiality of Statistical Records: A Threat-Monitoring Scheme for On Line Dialogue

1976 ◽  
Vol 15 (01) ◽  
pp. 36-42 ◽  
Author(s):  
J. Schlörer
Keyword(s):  
Statistical Data ◽  
Cost Benefit ◽  
Data Bank ◽  
High Ratio ◽  
Point Of View ◽  
Data Sets ◽  
Monitoring Scheme ◽  
Access Controls ◽  
On Line ◽  
Bona Fide

From a statistical data bank containing only anonymous records, the records sometimes may be identified and then retrieved, as personal records, by on line dialogue. The risk mainly applies to statistical data sets representing populations, or samples with a high ratio n/N. On the other hand, access controls are unsatisfactory as a general means of protection for statistical data banks, which should be open to large user communities. A threat monitoring scheme is proposed, which will largely block the techniques for retrieval of complete records. If combined with additional measures (e.g., slight modifications of output), it may be expected to render, from a cost-benefit point of view, intrusion attempts by dialogue valueless, if not absolutely impossible. The bona fide user has to pay by some loss of information, but considerable flexibility in evaluation is retained. The proposal of controlled classification included in the scheme may also be useful for off line dialogue systems.

Flexographic ink-coating interactions: effects of latex variations in coating layers

TAPPI Journal ◽  
2016 ◽  
Vol 15 (4) ◽  
pp. 253-262 ◽  
Author(s):  
ERIK BOHLIN ◽  
CAISA JOHANNSON ◽  
MAGNUS LESTELIUS
Keyword(s):  
Contact Angles ◽  
High Ratio ◽  
Print Quality ◽  
Particle Sizes ◽  
Mixed Composition ◽  
Coating Surface ◽  
Covered Area ◽  
Surface Optical ◽  
Flexographic Printing ◽  
Coating Formulation

The effect of coating structure variations on flexographic print quality was studied using pilot-coated paperboard samples with different latex content and latex particle sizes. Two latexes, with particle sizes of 120 nm and 160 nm, were added at either 12 parts per hundred (pph) or 18 pph to the coating formulation. The samples were printed with full tone areas at print forces of 25 N and 50 N in a laboratory flexographic printing press using a waterbased ink. A high ratio of uncovered areas (UCAs) could be detected for the samples that contained 18 pph latex printed at a print force of 25 N. UCAs decreased with increased print force and with decreased amounts of latex in the coating formulation. The fraction of latex covered area on the coating surface was estimated to be 0.35–0.40 for the 12 pph, and 0.70–0.75 for the 18 pph samples. The ink penetration depth into the coating layer could be linked to the fraction of latex-free areas on the coating surface. Optical cross section microscopy indicated that a higher printing force did not increase the depth of penetrated ink to any greater extent. Higher printing force did increase contact between plate and substrate, leading to an improved distribution of the ink. This, in turn, increased print density and decreased UCAs. On closer inspection, the UCAs could be categorized as being induced by steep topographic changes. When appearing at other locations, they were more likely to be caused by poor wetting of the surface. To understand the wetting behavior of the coating surface, observed contact angles were compared with calculated contact angles on surfaces of mixed composition.

Controlled Release of Metformin Hydrochloride I. In vitro Release from Physical Mixture Containing Xanthan Gum as Hydrophilic Rate Retarding Polymer

1970 ◽  
Vol 4 (1) ◽  
Author(s):  
Mashkura Ashrafi ◽  
Jakir Ahmed Chowdhury ◽  
Md Selim Reza
Keyword(s):  
Controlled Release ◽  
Xanthan Gum ◽  
In Vitro Release ◽  
Correlation Coefficients ◽  
High Ratio ◽  
Water Soluble ◽  
Metformin Hydrochloride ◽  
Model Drug ◽  
Very High

Capsules of different formulations were prepared by using a hydrophilic polymer, xanthan gum and a filler Ludipress. Metformin hydrochloride, which is an anti-diabetic agent, was used as a model drug here with the aim to formulate sustained release capsules. In the first 6 formulations, metformin hydrochloride and xanthan gum were used in different ratio. Later, Ludipress was added to the formulations in a percentage of 8% to 41%. The total procedure was carried out by physical mixing of the ingredients and filling in capsule shells of size ‘1’. As metformin hydrochloride is a highly water soluble drug, the dissolution test was done in 250 ml distilled water in a thermal shaker (Memmert) with a shaking speed of 50 rpm at 370C &plusmn 0.50C for 6 hours. After the dissolution, the data were treated with different kinetic models. The results found from the graphs and data show that the formulations follow the Higuchian release pattern as they showed correlation coefficients greater than 0.99 and the sustaining effect of the formulations was very high when the xanthan gum was used in a very high ratio with the drug. It was also investigated that the Ludipress extended the sustaining effect of the formulation to some extent. But after a certain period, Ludipress did not show any significant effect as the pores made by the xanthan gum network were already blocked. It is found here that when the metformin hydrochloride and the xanthan gum ratio was 1:1, showed a high percentage of drug release, i.e. 91.80% of drug was released after 6 hours. But With a xanthan gum and metformin hydrochloride ratio of 6:1, a very slow release of the drug was obtained. Only 66.68% of the drug was released after 6 hours. The percent loading in this case was 14%. Again, when Ludipress was used in high ratio, it was found to retard the release rate more prominently. Key words: Metformin Hydrochloride, Xanthan Gum, Controlled release capsule Dhaka Univ. J. Pharm. Sci. Vol.4(1) 2005 The full text is of this article is available at the Dhaka Univ. J. Pharm. Sci. website

Enterococci in the New Zealand environment: implications for water quality monitoring

1997 ◽  
Vol 35 (11-12) ◽  
pp. 325-331 ◽  
Author(s):  
S. A. Anderson ◽  
S. J. Turner ◽  
G. D. Lewis
Keyword(s):  
Water Quality ◽  
New Zealand ◽  
Water Quality Monitoring ◽  
Epidemiological Studies ◽  
High Ratio ◽  
Quality Data ◽  
Considerable Proportion ◽  
Multiple Sources ◽  
Water Quality Data ◽  
Bathing Water Quality

Faecal enterococci ecology outside the host is of great relevance when using these organisms as indicators of water quality. As a complement to New Zealand epidemiological studies of bathing water quality and health risk, a study of the environmental occurrence of these organisms has been undertaken. Specific concerns over the use of enterococci derive from the unique situation in New Zealand which has few chlorinated sewage effluents, a high ratio of grazing animals to humans, and significant inputs of animal processing effluents into the environment. Human and animal faecal wastes are the main sources, with 106–107cfu/100ml found in human sewage. Analysis of domestic and feral animal faeces found enterococci in the range of 101–106cfu/g with considerable variation between species. The latter observations support the notion that a considerable proportion of the load in urban/rural catchments and waterways (typically 102–103 enterococci cfu/100ml) is derived from non-human sources. Previous studies of enterococci quiescence in marine/fresh waters indicate that they enter a non-growth phase, exposure to sunlight markedly reducing culturability on selective and non-selective media. Enterococci were also found to survive/multiply within specific non-faecal environments. Enterococci on degrading drift seaweed at recreational beaches exceeded seawater levels by 2–4 orders of magnitude, suggesting that expansion had occurred in this permissive environment with resultant potential to contaminate adjacent sand and water. These studies suggest that multiple sources, environmental persistence, and environmental expansion of enterococci within selected niches add considerable complexity to the interpretation of water quality data.

scholarly journals Optimization of whole-genome sequencing of Plasmodium falciparum from low-density dried blood spot samples

2021 ◽  
Vol 20 (1) ◽  
Author(s):  
Noam B. Teyssier ◽  
Anna Chen ◽  
Elias M. Duarte ◽  
Rene Sit ◽  
Bryan Greenhouse ◽  
...  
Keyword(s):  
Whole Genome Sequencing ◽  
Genome Sequencing ◽  
Dropout Rate ◽  
Dried Blood Spots ◽  
High Ratio ◽  
Low Density ◽  
Whole Genome ◽  
Cross Sectional ◽  
Modest Improvement ◽  
Primer Sets

Abstract Background Whole-genome sequencing (WGS) is becoming increasingly useful to study the biology, epidemiology, and ecology of malaria parasites. Despite ease of sampling, DNA extracted from dried blood spots (DBS) has a high ratio of human DNA compared to parasite DNA, which poses a challenge for downstream genetic analyses. The effects of multiple methods for DNA extraction, digestion of methylated DNA, and amplification were evaluated on the quality and fidelity of WGS data recovered from DBS. Methods Low parasite density mock DBS samples were created, extracted either with Tween-Chelex or QIAamp, treated with or without McrBC, and amplified with one of three different amplification techniques (two sWGA primer sets and one rWGA). Extraction conditions were evaluated on performance of sequencing depth, percentiles of coverage, and expected SNP concordance. Results At 100 parasites/μL, Chelex-Tween-McrBC samples had higher coverage (5 × depth = 93% genome) than QIAamp extracted samples (5 × depth = 76% genome). The two evaluated sWGA primer sets showed minor differences in overall genome coverage and SNP concordance, with a newly proposed combination of 20 primers showing a modest improvement in coverage over those previously published. Conclusions Overall, Tween-Chelex extracted samples that were treated with McrBC digestion and are amplified using 6A10AD sWGA conditions had minimal dropout rate, higher percentages of coverage at higher depth, and more accurate SNP concordance than QiaAMP extracted samples. These findings extend the results of previously reported methods, making whole genome sequencing accessible to a larger number of low density samples that are commonly encountered in cross-sectional surveys.

scholarly journals Synthesis and Characterisation of a Boron-Rich Symmetric Triazine Bearing a Hypoxia-Targeting Nitroimidazole Moiety

Symmetry ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 202
Author(s):  
Tobias Hartwig Bünning ◽  
Luigi Panza ◽  
Abdel Kareem Azab ◽  
Barbara Muz ◽  
Silvia Fallarini ◽  
...  
Keyword(s):  
Tumor Tissue ◽  
High Ratio ◽  
Neutron Capture Therapy ◽  
Boron Compounds ◽  
The Core ◽  
Boron Neutron Capture ◽  
Starting Point ◽  
Primary Fibroblasts ◽  
Normal Human ◽  
Hypoxia Markers

Boron Neutron Capture Therapy (BNCT) is a binary therapy that promises to be suitable in treating many non-curable cancers. To that, the discovery of new boron compounds able to accumulate selectively in the tumour tissue is still required. Hypoxia, a deficiency of oxygen in tumor tissue, is a great challenge in the conventional treatment of cancer, because hypoxic areas are resistant to conventional anticancer treatments. 2-Nitroimidazole derivatives are known to be hypoxia markers due to their enrichment by bioreduction in hypoxic cells. In the present work, 2-nitroimidazole was chosen as the starting point for the synthesis of a new boron-containing compound based on a 1,3,5-triazine skeleton. Two o-carborane moieties were inserted to achieve a high ratio of boron on the molecular weight, exploiting a short PEG spacer to enhance the polarity of the compound and outdistance the active part from the core. The compound showed no toxicity on normal human primary fibroblasts, while it showed noteworthy toxicity in multiple myeloma cells together with a consistent intracellular boron accumulation.

scholarly journals Development and Evaluation of Geostatistical Methods for Estimating Weather Related Collisions: A Large-Scale Case Study

2021 ◽  
pp. 036119812110200
Author(s):  
Andy H. Wong ◽  
Tae J. Kwon
Keyword(s):  
Large Scale ◽  
Mean Squared Error ◽  
Hot Spot ◽  
High Ratio ◽  
Contributing Factors ◽  
Geostatistical Methods ◽  
Road Users ◽  
Statistical Measures ◽  
Weather Events

Winter driving conditions pose a real hazard to road users with increased chance of collisions during inclement weather events. As such, road authorities strive to service the hazardous roads or collision hot spots by increasing road safety, mobility, and accessibility. One measure of a hot spot would be winter collision statistics. Using the ratio of winter collisions (WC) to all collisions, roads that show a high ratio of WC should be given a high priority for further diagnosis and countermeasure selection. This study presents a unique methodological framework that is built on one of the least explored yet most powerful geostatistical techniques, namely, regression kriging (RK). Unlike other variants of kriging, RK uses auxiliary variables to gain a deeper understanding of contributing factors while also utilizing the spatial autocorrelation structure for predicting WC ratios. The applicability and validity of RK for a large-scale hot spot analysis is evaluated using the northeast quarter of the State of Iowa, spanning five winter seasons from 2013/14 to 2017/18. The findings of the case study assessed via three different statistical measures (mean squared error, root mean square error, and root mean squared standardized error) suggest that RK is very effective for modeling WC ratios, thereby further supporting its robustness and feasibility for a statewide implementation.

scholarly journals Application of Dendrimers for Treating Parasitic Diseases

Pharmaceutics ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 343
Author(s):  
Veronica Folliero ◽  
Carla Zannella ◽  
Annalisa Chianese ◽  
Debora Stelitano ◽  
Annalisa Ambrosino ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Water Solubility ◽  
Parasitic Infection ◽  
Three Dimensional ◽  
Medical Knowledge ◽  
High Ratio ◽  
Molecular Volume ◽  
Parasitic Infections ◽  
Parasitic Diseases ◽  
Wide Range

Despite advances in medical knowledge, parasitic diseases remain a significant global health burden and their pharmacological treatment is often hampered by drug toxicity. Therefore, drug delivery systems may provide useful advantages when used in combination with conventional therapeutic compounds. Dendrimers are three-dimensional polymeric structures, characterized by a central core, branches and terminal functional groups. These nanostructures are known for their defined structure, great water solubility, biocompatibility and high encapsulation ability against a wide range of molecules. Furthermore, the high ratio between terminal groups and molecular volume render them a hopeful vector for drug delivery. These nanostructures offer several advantages compared to conventional drugs for the treatment of parasitic infection. Dendrimers deliver drugs to target sites with reduced dosage, solving side effects that occur with accepted marketed drugs. In recent years, extensive progress has been made towards the use of dendrimers for therapeutic, prophylactic and diagnostic purposes for the management of parasitic infections. The present review highlights the potential of several dendrimers in the management of parasitic diseases.

scholarly journals A two-stage amplified PZT sensor for monitoring lung and heart sounds in discharged pneumonia patients

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Hongbin Chen ◽  
Shuai Yu ◽  
Haiyang Liu ◽  
Jie Liu ◽  
Yongguang Xiao ◽  
...  
Keyword(s):  
High Sensitivity ◽  
Cost Effective ◽  
High Ratio ◽  
Heart Sounds ◽  
Two Stage ◽  
Diagnosis And Prognosis ◽  
Sensor Device ◽  
Cost Effective Alternative ◽  
A Charge ◽  
Highly Sensitive Detection

AbstractAssessment of lung and heart states is of critical importance for patients with pneumonia. In this study, we present a small-sized and ultrasensitive accelerometer for continuous monitoring of lung and heart sounds to evaluate the lung and heart states of patients. Based on two-stage amplification, which consists of an asymmetric gapped cantilever and a charge amplifier, our accelerometer exhibited an extremely high ratio of sensitivity to noise compared with conventional structures. Our sensor achieves a high sensitivity of 9.2 V/g at frequencies less than 1000 Hz, making it suitable to use to monitor weak physiological signals, including heart and lung sounds. For the first time, lung injury, heart injury, and both lung and heart injuries in discharged pneumonia patients were revealed by our sensor device. Our sound sensor also successfully tracked the recovery course of the discharged pneumonia patients. Over time, the lung and heart states of the patients gradually improved after discharge. Our observations were in good agreement with clinical reports. Compared with conventional medical instruments, our sensor device provides rapid and highly sensitive detection of lung and heart sounds, which greatly helps in the evaluation of lung and heart states of pneumonia patients. This sensor provides a cost-effective alternative approach to the diagnosis and prognosis of pneumonia and has the potential for clinical and home-use health monitoring.

Sign in / Sign up

Export Citation Format

Share Document