scholarly journals A novel rapid method of purely elastic solution correction to estimate multiaxial elastic-plastic behaviour

2019 ◽  
Vol 6 (3) ◽  
pp. 269-283
Author(s):  
Nicolas Antoni
Keyword(s):  
Three Dimensional ◽  
Elastic Solution ◽  
Upper And Lower Bounds ◽  
Efficient Design ◽  
Effective Parameters ◽  
Relative Deviation ◽  
Elastic Plastic ◽  
Plastic Behaviour ◽  
A New Technique ◽  
Good Agreement

Abstract In structural analysis, it is of paramount importance to assess the level of plasticity a structure may experience under monotonic or cyclic loading as this may have a significant impact, particularly in fatigue analysis for singular areas. For efficient design analyses, it is often searched for a compromise in accuracy that consists in correcting a purely elastic analysis, generally simpler and faster to obtain compared to a full non-linear Finite Element (FE) analysis involving elastic-plastic behaviour, to estimate the actual elastic-plastic solution. There exists a great number of correction techniques in the literature among which the most famous and commonly used are Neuber and ESED energy-based methods. Nonetheless, both of them are known to provide respectively upper and lower bounds of the exact solution in most cases, with a relative deviation depending on the level of multiaxiality and on the amount of stress redistribution due to yielding. The new methodology presented in this paper is based on the well-known multiaxial Radial Return Method (RRM) revisited using effective parameters approach. By essence, it is fast and can be applied either to analytical elastic problems or to more complex three-dimensional elastic FE analyses. The accuracy of the proposed method is assessed by direct comparison with results from Neuber and ESED methods on various examples. It is also shown for each of them that this new method is very good agreement with the exact elastic-plastic solution. Highlights A new technique of purely elastic solution correction is presented and evaluated. The proposed method relies on the modification of Return Radial Method (RRM) considering effective parameters in lieu of initial elastic tensor. The obtained equation preserves the simplicity and efficiency of other well-known energy-based methods such as Neuber and ESED. It is shown on several examples that the proposed technique is in very good agreement with the exact or FE elastic-plastic solution, with very low relative deviation.

Two-scale modeling of unsaturated water flow in a double-porosity medium under axisymmetric conditions

2008 ◽  
Vol 45 (2) ◽  
pp. 238-251 ◽  
Author(s):  
Adam Szymkiewicz ◽  
Jolanta Lewandowska ◽  
Rafael Angulo-Jaramillo ◽  
Joanna Butlańska
Keyword(s):  
Unsaturated Flow ◽  
Local Equilibrium ◽  
Three Dimensional ◽  
Fine Sand ◽  
Double Porosity ◽  
Effective Parameters ◽  
Local Boundary ◽  
Scale Modeling ◽  
Cumulative Infiltration ◽  
Good Agreement

In this paper the development and experimental validation of a numerical model of two-dimensional unsaturated flow in a double-porosity medium is presented. The model is based on the coupled formulation for flow in macro- and micropores obtained by homogenization. It was applied to simulate the axisymmetrical tension disk infiltration experiments that were carried out in a double-porosity medium. The physical model was a three-dimensional periodic structure, composed of porous spheres made of sintered clay and embedded in Hostun fine sand HN38. The hydraulic parameters of both porous materials were determined by inverse analysis of independent infiltration experiments performed on sand and sintered clay. The effective parameters of the double-porosity medium were calculated from the solution of the local boundary value problem, obtained from the homogenization procedure. The cumulative infiltration curve and the global dimensions of the humidified zone obtained from the numerical solution are in good agreement with the observations. Moreover, numerical simulations showed the existence of a narrow zone of local nonequilibrium that moves with the infiltration front. Upstream of this zone, the infiltration bulb is in the local equilibrium conditions.

Elasto-plastic state of curve beam system subjected to complex loading

1996 ◽  
Vol 18 (4) ◽  
pp. 14-22
Author(s):  
Vu Khac Bay
Keyword(s):  
Cylindrical Shell ◽  
Solution Method ◽  
Complex Loading ◽  
Numerical Results ◽  
Elastic Solution ◽  
Plastic State ◽  
Curve Beam ◽  
Elastic State ◽  
Elastic Plastic ◽  
Beam System

Investigation of the elastic state of curve beam system had been considered in [3]. In this paper the elastic-plastic state of curve beam system in the form of cylindrical shell is analyzed by the elastic solution method. Numerical results of the problem and conclusion are given.

A Free Energy Perturbation Approach to Estimate the Intrinsic Solubilities of Drug-like Small Molecules

2019 ◽  
Author(s):  
Sayan Mondal ◽  
Gary Tresadern ◽  
Jeremy Greenwood ◽  
Byungchan Kim ◽  
Joe Kaus ◽  
...  
Keyword(s):  
Solid State ◽  
Small Molecules ◽  
Three Dimensional ◽  
Aqueous Solubility ◽  
Computational Approach ◽  
Free Energy Perturbation ◽  
Perturbation Approach ◽  
Energy Perturbation ◽  
State Form ◽  
Good Agreement

<p>Optimizing the solubility of small molecules is important in a wide variety of contexts, including in drug discovery where the optimization of aqueous solubility is often crucial to achieve oral bioavailability. In such a context, solubility optimization cannot be successfully pursued by indiscriminate increases in polarity, which would likely reduce permeability and potency. Moreover, increasing polarity may not even improve solubility itself in many cases, if it stabilizes the solid-state form. Here we present a novel physics-based approach to predict the solubility of small molecules, that takes into account three-dimensional solid-state characteristics in addition to polarity. The calculated solubilities are in good agreement with experimental solubilities taken both from the literature as well as from several active pharmaceutical discovery projects. This computational approach enables strategies to optimize solubility by disrupting the three-dimensional solid-state packing of novel chemical matter, illustrated here for an active medicinal chemistry campaign.</p>

scholarly journals Simulation of Thermal and Electric Field Distribution in Packaged Sausages Heated in a Stationary Versus a Rotating Microwave Oven

Foods ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1622
Author(s):  
Wipawee Tepnatim ◽  
Witchuda Daud ◽  
Pitiya Kamonpatana
Keyword(s):  
Temperature Distribution ◽  
Electric Field ◽  
Three Dimensional ◽  
Development Stage ◽  
Microwave Oven ◽  
Computational Time ◽  
Plastic Package ◽  
Heating Uniformity ◽  
The Cost ◽  
Good Agreement

The microwave oven has become a standard appliance to reheat or cook meals in households and convenience stores. However, the main problem of microwave heating is the non-uniform temperature distribution, which may affect food quality and health safety. A three-dimensional mathematical model was developed to simulate the temperature distribution of four ready-to-eat sausages in a plastic package in a stationary versus a rotating microwave oven, and the model was validated experimentally. COMSOL software was applied to predict sausage temperatures at different orientations for the stationary microwave model, whereas COMSOL and COMSOL in combination with MATLAB software were used for a rotating microwave model. A sausage orientation at 135° with the waveguide was similar to that using the rotating microwave model regarding uniform thermal and electric field distributions. Both rotating models provided good agreement between the predicted and actual values and had greater precision than the stationary model. In addition, the computational time using COMSOL in combination with MATLAB was reduced by 60% compared to COMSOL alone. Consequently, the models could assist food producers and associations in designing packaging materials to prevent leakage of the packaging compound, developing new products and applications to improve product heating uniformity, and reducing the cost and time of the research and development stage.

scholarly journals 3D-Volume Rendering of the Pelvis with Emphasis on Paraurethral Structures Based on MRI Scans and Comparisons between 3D Slicer and OsiriX®

2021 ◽  
Vol 45 (3) ◽  
Author(s):  
C. M. Durnea ◽  
S. Siddiqi ◽  
D. Nazarian ◽  
G. Munneke ◽  
P. M. Sedgwick ◽  
...  
Keyword(s):  
Image Processing ◽  
Secondary Analysis ◽  
Three Dimensional ◽  
3D Models ◽  
Clinical Role ◽  
Cross Sectional ◽  
3D Slicer ◽  
Mri Scans ◽  
3D Volume ◽  
Good Agreement

AbstractThe feasibility of rendering three dimensional (3D) pelvic models of vaginal, urethral and paraurethral lesions from 2D MRI has been demonstrated previously. To quantitatively compare 3D models using two different image processing applications: 3D Slicer and OsiriX. Secondary analysis and processing of five MRI scan based image sets from female patients aged 29–43 years old with vaginal or paraurethral lesions. Cross sectional image sets were used to create 3D models of the pelvic structures with 3D Slicer and OsiriX image processing applications. The linear dimensions of the models created using the two different methods were compared using Bland-Altman plots. The comparisons demonstrated good agreement between measurements from the two applications. The two data sets obtained from different image processing methods demonstrated good agreement. Both 3D Slicer and OsiriX can be used interchangeably and produce almost similar results. The clinical role of this investigation modality remains to be further evaluated.

scholarly journals 3D FEM Model on the Parameters’ Influence of EPB-TBM on Settlements of Single and Twin Metro Tunnels During Construction

2021 ◽  
Author(s):  
Masoud Forsat ◽  
Mohammad Taghipoor ◽  
Masoud Palassi
Keyword(s):  
Three Dimensional ◽  
Injection Pressure ◽  
Effective Parameters ◽  
Grout Injection ◽  
3D Fem ◽  
Supporting Pressure ◽  
Epb Tbm ◽  
The Face ◽  
Clear Distance ◽  
Twin Tunnels

AbstractThe present research exposes the investigation on three-dimensional modeling of the single and twin metro tunnels for the case of the Tehran metro line. At first, simulation implemented on the comparison of the ground movements in the single and twin tunnels. Then the simulation has been performed on the influence of effective parameters of EPB-TBM on the surface settlements throughout excavation. The overcutting, shield conicity, grouting, and the final lining system modeled and the influence of face supporting pressure, grout injection pressure, as well as the clear distance of the tunnels, has been analyzed. The initial results showed a valid ground settlement behavior. The maximum settlements occurred at the end of the shield tail and it was higher in the single tunnel. The face supporting pressure had more effect on the surface settlement in comparison to the grout injection pressure. By increasing the face pressure in the single tunnel, the place of maximum settlement moved back while the grout pressure is insignificant for decreasing the settlements. Furthermore, the influence of the clear distance in the twin tunnels led to zero after the length of 30 m. Accordingly, for more distances, the tunnels must be examined independently and as two different single tunnels.

scholarly journals Pulsed Electromagnetic Cross-Well Exploration for Monitoring Permafrost and Examining the Processes of Its Geocryological Changes

Geosciences ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 60
Author(s):  
Viacheslav Glinskikh ◽  
Oleg Nechaev ◽  
Igor Mikhaylov ◽  
Kirill Danilovskiy ◽  
Vladimir Olenchenko
Keyword(s):  
High Performance ◽  
Geophysical Methods ◽  
Three Dimensional ◽  
High Sensitivity ◽  
Data Interpretation ◽  
Industrial Facilities ◽  
Wide Range ◽  
Vector Finite Element ◽  
A New Technique ◽  
Pulsed Electromagnetic

This paper is dedicated to the topical problem of examining permafrost’s state and the processes of its geocryological changes by means of geophysical methods. To monitor the cryolithozone, we proposed and scientifically substantiated a new technique of pulsed electromagnetic cross-well sounding. Based on the vector finite-element method, we created a mathematical model of the cross-well sounding process with a pulsed source in a three-dimensional spatially heterogeneous medium. A high-performance parallel computing algorithm was developed and verified. Through realistic geoelectric models of permafrost with a talik under a highway, constructed following the results of electrotomography field data interpretation, we numerically simulated the pulsed sounding on the computing resources of the Siberian Supercomputer Center of SB RAS. The simulation results suggest the proposed system of pulsed electromagnetic cross-well monitoring to be characterized by a high sensitivity to the presence and dimensions of the talik. The devised approach can be oriented to addressing a wide range of issues related to monitoring permafrost rocks under civil and industrial facilities, buildings, and constructions.

scholarly journals Experimental and Numerical Investigation about Small Clearance Journal Bearings under Static Load Conditions

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Carlo Alberto Niccolini Marmont Du Haut Champ ◽  
Fabrizio Stefani ◽  
Paolo Silvestri
Keyword(s):  
Three Dimensional ◽  
Journal Bearings ◽  
Radial Clearance ◽  
Small Scale ◽  
Test Rig ◽  
Small Clearance ◽  
Dimensional Simulation ◽  
Dynamic Loading Conditions ◽  
Static And Dynamic Loading ◽  
Good Agreement

The aim of the present research is to characterize both experimentally and numerically journal bearings with low radial clearances for rotors in small-scale applications (e.g., microgas turbines); their diameter is in the order of ten millimetres, leading to very small dimensional clearances when the typical relative ones (order of 1/1000) are employed; investigating this particular class of journal bearings under static and dynamic loading conditions represents something unexplored. To this goal, a suitable test rig was designed and the performance of its bearings was investigated under steady load. For the sake of comparison, numerical simulations of the lubrication were also performed by means of a simplified model. The original test rig adopted is a commercial rotor kit (RK), but substantial modifications were carried out in order to allow significant measurements. Indeed, the relative radial clearance of RK4 RK bearings is about 2/100, while it is around 1/1000 in industrial bearings. Therefore, the same original RK bearings are employed in this new test rig, but a new shaft was designed to reduce their original clearance. The new custom shaft allows to study bearing behaviour for different clearances, since it is equipped with interchangeable journals. Experimental data obtained by this test rig are then compared with further results of more sophisticated simulations. They were carried out by means of an in-house developed finite element (FEM) code, suitable for thermoelasto-hydrodynamic (TEHD) analysis of journal bearings both in static and dynamic conditions. In this paper, bearing static performances are studied to assess the reliability of the experimental journal location predictions by comparing them with the ones coming from already validated numerical codes. Such comparisons are presented both for large and small clearance bearings of original and modified RKs, respectively. Good agreement is found only for the modified RK equipped with small clearance bearings (relative radial clearance 8/1000), as expected. In comparison with two-dimensional lubrication analysis, three-dimensional simulation improves prediction of journal location and correlation with experimental results.

scholarly journals Nonlinear effects of locally heterogeneous hydraulic conductivity fields on regional stream–aquifer exchanges

2015 ◽  
Vol 19 (11) ◽  
pp. 4531-4545 ◽  
Author(s):  
J. Zhu ◽  
C. L. Winter ◽  
Z. Wang
Keyword(s):  
Groundwater Flow ◽  
Effective Conductivity ◽  
Model Simulation ◽  
Three Dimensional ◽  
Small Scale ◽  
Heihe River ◽  
Effective Parameters ◽  
Aquifer Systems ◽  
Basin Scale ◽  
Local Grid

Abstract. Computational experiments are performed to evaluate the effects of locally heterogeneous conductivity fields on regional exchanges of water between stream and aquifer systems in the Middle Heihe River basin (MHRB) of northwestern China. The effects are found to be nonlinear in the sense that simulated discharges from aquifers to streams are systematically lower than discharges produced by a base model parameterized with relatively coarse effective conductivity. A similar, but weaker, effect is observed for stream leakage. The study is organized around three hypotheses: (H1) small-scale spatial variations of conductivity significantly affect regional exchanges of water between streams and aquifers in river basins, (H2) aggregating small-scale heterogeneities into regional effective parameters systematically biases estimates of stream–aquifer exchanges, and (H3) the biases result from slow paths in groundwater flow that emerge due to small-scale heterogeneities. The hypotheses are evaluated by comparing stream–aquifer fluxes produced by the base model to fluxes simulated using realizations of the MHRB characterized by local (grid-scale) heterogeneity. Levels of local heterogeneity are manipulated as control variables by adjusting coefficients of variation. All models are implemented using the MODFLOW (Modular Three-dimensional Finite-difference Groundwater Flow Model) simulation environment, and the PEST (parameter estimation) tool is used to calibrate effective conductivities defined over 16 zones within the MHRB. The effective parameters are also used as expected values to develop lognormally distributed conductivity (K) fields on local grid scales. Stream–aquifer exchanges are simulated with K fields at both scales and then compared. Results show that the effects of small-scale heterogeneities significantly influence exchanges with simulations based on local-scale heterogeneities always producing discharges that are less than those produced by the base model. Although aquifer heterogeneities are uncorrelated at local scales, they appear to induce coherent slow paths in groundwater fluxes that in turn reduce aquifer–stream exchanges. Since surface water–groundwater exchanges are critical hydrologic processes in basin-scale water budgets, these results also have implications for water resources management.

Sign in / Sign up

Export Citation Format

Share Document