scholarly journals Characterizing glitches and timing irregularities in pulsars and magnetars

2012 ◽  
Vol 8 (S291) ◽  
pp. 381-381
Author(s):  
Cristobal Espinoza ◽  
Danai Antonopoulou ◽  
Alessandro Patruno ◽  
Ben Stappers ◽  
Anna Watts
Keyword(s):  
Small Sample ◽  
Radio Pulsars ◽  
Physical Mechanisms ◽  
Timing Data ◽  
First Results ◽  
Different Populations ◽  
Timing Noise ◽  
Error Bars ◽  
The Difference

AbstractAs the quantity and quality of timing data improves, we have reached the point at which the difference between timing noise and small glitches is unclear. As a consequence, the number of events reported as glitches which show unusual properties, quite different to those of giant glitches, has increased. For example, there is now a substantial population of glitches that apparently involve a decrease in spin-down rate rather than an increase. Motivated by the theoretical implications of such a result, we are conducting a detailed review of how glitches are detected and characterised. We have focused on three main questions: the observational biases affecting glitch detection; the methods used to characterise error bars on changes in spin and spin derivatives; and the physical mechanisms that could potentially explain the different populations of timing irregularities, in the light of improved characterisation. While glitches are thought to be a consequence of the internal dynamics of the star, magnetospheric processes may be responsible for other irregularities, as timing noise and peculiar glitch recoveries. We report the first results from this study, using a small sample of radio pulsars that exhibit a wide variety of glitching behaviour.

scholarly journals Intercomparison of integrated IASI and AATSR calibrated radiances at 11 and 12 μm

2009 ◽  
Vol 9 (18) ◽  
pp. 6677-6683 ◽  
Author(s):  
S. M. Illingworth ◽  
J. J. Remedios ◽  
R. J. Parker
Keyword(s):  
Weather Prediction ◽  
Radiometric Calibration ◽  
Spectral Filter ◽  
Brightness Temperatures ◽  
First Results ◽  
Data Points ◽  
The Difference ◽  
Cross Calibration ◽  
Sky Conditions

Abstract. The mission objectives of the Infrared Atmospheric Sounding Interferometer (IASI) are driven by the needs of the Numerical Weather Prediction (NWP) and climate monitoring communities. These objectives rely upon the IASI instrument being able to measure top of atmosphere radiances accurately. This paper presents a technique and first results for the validation of the radiometric calibration of radiances for IASI, using a cross-calibration with the Advanced Along Track Scanning Radiometer (AATSR). The AATSR is able to measure Brightness Temperature (BT) to an accuracy of 30 mK, and by applying the AATSR spectral filter functions to the IASI measured radiances we are able to compare AATSR and IASI Brightness Temperatures. By choosing coincident data points that are over the sea and in clear sky conditions, a threshold of homogeneity is derived. It is found that in these homogenous conditions, the IASI BTs agree with those measured by the AATSR to within 0.3 K, with an uncertainty of order 0.1 K. The agreement is particularly good at 11 μm where the difference is less than 0.1 K. These first results indicate that IASI is meeting its target objective of 0.5 K accuracy. It is believed that a refinement of the AATSR spectral filter functions will hopefully permit a tighter error constraint on the quality of the IASI data and hence further assessment of the climate quality of the radiances.

scholarly journals Global carbon monoxide as retrieved from SCIAMACHY by WFM-DOAS

2004 ◽  
Vol 4 (7) ◽  
pp. 1945-1960 ◽  
Author(s):  
M. Buchwitz ◽  
R. de Beek ◽  
K. Bramstedt ◽  
S. Noël ◽  
H. Bovensmann ◽  
...  
Keyword(s):  
Carbon Monoxide ◽  
Near Infrared ◽  
Weighting Function ◽  
Constant Factor ◽  
Retrieval Algorithm ◽  
First Results ◽  
Infrared Spectral ◽  
The Difference ◽  
Global Carbon

Abstract. First results concerning the retrieval of tropospheric carbon monoxide (CO) from satellite solar backscatter radiance measurements in the near-infrared spectral region (~2.3µm) are presented. The Weighting Function Modified (WFM) DOAS retrieval algorithm has been used to retrieve vertical columns of CO from SCIAMACHY/ENVISAT nadir spectra. We present detailed results for three days from the time periode January to October 2003 selected to have good overlap with the daytime CO measurements of MOPITT onboard EOS Terra. Because the WFM-DOAS Version 0.4 CO columns presented in this paper are scaled by a constant factor of 0.5 to compensate for an obvious overestimation we focus on the variability of the retrieved columns rather than on their absolute values. It is shown that plumes of CO resulting from, e.g. biomass burning in Africa, are detectable with single overpass SCIAMACHY data. Globally, the SCIAMACHY CO columns are in reasonable agreement with the Version 3 CO column data product of MOPITT. For example, for measurements over land, where the quality of the data is typically better than over ocean due to higher surface reflectivity, the standard deviation of the difference with respect to MOPITT is in the range 0.4-0.6x1018 molecules/cm2 and the linear correlation coefficient is between 0.4 and 0.7. The level of agreement between the data of both sensors depends on time and location but is typically within 30% for most latitudes. In the southern hemisphere outside Antarctica SCIAMACHY tends to give systematically higher values than MOPITT. More studies are needed to find out what the reasons for the observed differences with respect to MOPITT are and how the algorithm can be modified to improve the quality of the CO columns as retrieved from SCIAMACHY.

scholarly journals The Analysis of The Process of Barley Grain Separation from Undesirable Particles

2021 ◽  
Vol 1 (1) ◽  
Author(s):  
Jiří ZEGZULKA ◽  
Lucie JEZERSKA ◽  
HETCLOVA Vladimíra ◽  
PROKES Rostislav ◽  
RUTTKAY Vaclav
Keyword(s):  
Friction Angle ◽  
Barley Grain ◽  
Separation Processes ◽  
Material Particle ◽  
Angle Of Internal Friction ◽  
Powder Density ◽  
First Results ◽  
The Difference ◽  
Barley Grains

The article focuses on the intensification of raw barley grains initial purification and separation processes before the subsequentprocessing in the area of brewing. Above all, it deals with the physical and mechanical concepts of the purification and separationof qualitatively satisfactory grains from undesirable impurities, e.g. coarse impurities, as the prevention from the potential damageof milling and scrapping facilities. Four different cultivated barley species were tested within the study. Physical and mechanicalparameters were determined in all samples, for instance powder density, angle of internal friction and external friction angle withsteel contact material, particle size distribution and morphology. The first results of measuring revealed the difference in the qualityof initial entering component of barley grains before the purification process compared to the output quality of grains after machinepurification and separation processes in the facilities determined for the subsequent grain storage. As a result of the non-effectiveprocess of separation, the final quality of the product, i.e. the beer, may be affected by the qualitative parameters of partial processesinvolved in treating barley grains.

Letter to the Editor: The Continuing Challenge of Evaluating RSD Impairment and Disability

1998 ◽  
Vol 3 (5) ◽  
pp. 8-10
Author(s):  
Robert L. Knobler ◽  
Charles N. Brooks ◽  
Leon H. Ensalada ◽  
James B. Talmage ◽  
Christopher R. Brigham
Keyword(s):  
Disability Evaluation ◽  
Body Part ◽  
Loss Of Function ◽  
Regulatory Requirements ◽  
Major Cardiac Event ◽  
Clinical Scenarios ◽  
Impairment Score ◽  
Occupational Activities ◽  
The Difference

Abstract The author of the two-part article about evaluating reflex sympathetic dystrophy (RSD) responds to criticisms that a percentage impairment score may not adequately reflect the disability of an individual with RSD. The author highlights the importance of recognizing the difference between impairment and disability in the AMA Guides to the Evaluation of Permanent Impairment (AMA Guides): impairment is the loss, loss of use, or derangement of any body part, system, or function; disability is a decrease in or the loss or absence of the capacity to meet personal, social, or occupational demands or to meet statutory or regulatory requirements because of an impairment. The disparity between impairment and disability can be encountered in diverse clinical scenarios. For example, a person's ability to resume occupational activities following a major cardiac event depends on medical, social, and psychological factors, but nonmedical factors appear to present the greatest impediment and many persons do not resume work despite significant improvements in functional capacity. A key requirement according to the AMA Guides is objective documentation, and the author agrees that when physicians consider the disability evaluation of people, more issues than those relating to the percentage loss of function should be considered. More study of the relationships among impairment, disability, and quality of life in patients with RSD are required.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

THE INFLUENCE OF TILLAGE SYSTEMS ON THE GROWTH, DEVELOPMENT AND YIELD OF LONG-FLAX

2020 ◽  
Author(s):  
V. Dumych ◽  
Keyword(s):  
Growth And Development ◽  
Field Experiments ◽  
Conservation Tillage ◽  
Mineral Fertilizers ◽  
Tillage Systems ◽  
Yield And Quality ◽  
Tillage System ◽  
The Difference ◽  
Flax Seeds

The purpose of research: to improve the technology of growing flax in the Western region of Ukraine on the basis of the introduction of systems for minimizing tillage, which will increase the yield of trusts and seeds. Research methods: field, laboratory, visual and comparative calculation method. Research results: Field experiments included the study of three tillage systems (traditional, canning and mulching) and determining their impact on growth and development and yields of trusts and flax seeds. The traditional tillage system included the following operations: plowing with a reversible plow to a depth of 27 cm, cultivation with simultaneous harrowing and pre-sowing tillage. The conservation system is based on deep shelfless loosening of the soil and provided for chiseling to a depth of 40 cm, disking to a depth of 15 cm, cultivation with simultaneous harrowing, pre-sowing tillage. During the implementation of the mulching system, disking to a depth of 15 cm, cultivation with simultaneous harrowing and pre-sowing tillage with a combined unit was carried out. Tillage implements and machines were used to perform tillage operations: disc harrow BDVP-3,6, reversible plow PON-5/4, chisel PCh-3, cultivator KPSP-4, pre-sowing tillage unit LK-4. The SZ-3,6 ASTPA grain seeder was used for sowing long flax of the Kamenyar variety. Simultaneously with the sowing of flax seeds, local application of mineral fertilizers (nitroammophoska 2 c/ha) was carried out. The application of conservation tillage allows to obtain the yield of flax trust at the level of 3,5 t/ha, which is 0,4 t/ha (12.9 %) more than from the area of traditional tillage and 0,7 t/ha (25 %) in comparison with mulching. In the area with canning treatment, the seed yield was the highest and amounted to 0,64 t/ha. The difference between this option and traditional and mulching tillage reaches 0,06 t/ha (10,3 %) and 0.10 t/ha (18.5 %), respectively. Conclusions. Preservation tillage, which is based on shelf-free tillage to a depth of 40 cm and disking to a depth of 15 cm has a positive effect on plant growth and development, yield and quality of flax.

Pengaruh ovaprim, aromatase inhibitor, dan hipofisa terhadap kualitas telur ikan Lele Dumbo (Clarias gariepinus)

2017 ◽  
Vol 5 (1) ◽  
Author(s):  
Erwin A. Aziz ◽  
Ockstan Kalesaran
Keyword(s):  
Survival Rate ◽  
Experimental Design ◽  
Aromatase Inhibitor ◽  
Fish Larvae ◽  
Clarias Gariepinus ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
The Difference ◽  
Hatching Eggs

This study aimed to determine the effect of ovaprim hormone, aromatase inhibitor and pituitary on the quality of the catfish eggs (Clarias gariepinus). Experimental Design used was Completely Randomized Design (CRD) with four treatments, each with three replications. Treatment A: ovaprim; treatment B: Aromatase inhibitors, treatment C: hypophysis and treatment D: Control. The results showed that the difference in treatment gave highly significant effect on fertilization and hatching eggs but no significant effect on the survival rate of larvae. Aromatase inhibitor hormone was the best because it provided highly significant effect on fertilization (92.66%), hatchability of eggs (95%), and surviva rate (81.33%) of fish larvae.   Keywords : Clarias gariepinus. Ovaprim, Aromatase Inhibitor, Hypophysis, egg, larvae

’Propylene glycolate’ used as a top coat seal to protect thick juice from degradation in ellipsoidal storage tanks

2013 ◽  
pp. 215-218
Author(s):  
Robert O. Hatch ◽  
Craig M. Giles ◽  
Jay S. Creiglow ◽  
David R. Smith
Keyword(s):  
Propylene Glycol ◽  
Barrier Layer ◽  
Chemical Properties ◽  
Polypropylene Glycol ◽  
Storage Tanks ◽  
First Results ◽  
Thick Juice

The use of sodium propylene glycol for thick juice storage was investigated at Spreckels Sugar Company, in Brawley, California (USA). Sodium-polypropylene glycol has a density of 1.07 and does not mix with thick juice. Therefore it is suitable as a barrier layer. Chemical properties of propylene glycol, and the deposition on the top of thick juice are described. First results of the last campaign are compared with data from previous years. A significantly lower tendency in the reduction of the quality of the thick juice was found.

Multivariate micropollutants analysis in marine waters

1995 ◽  
Vol 32 (9-10) ◽  
pp. 341-348
Author(s):  
V. Librando ◽  
G. Magazzù ◽  
A. Puglisi
Keyword(s):  
Multivariate Data Analysis ◽  
Partial Least Squares Regression ◽  
Environmental Chemistry ◽  
Sampling Site ◽  
Principal Component ◽  
Least Squares Regression ◽  
Organic Micropollutants ◽  
Suspended Material ◽  
The Difference

The monitoring of water quality today provides a great quantity of data consisting of the values of the parameters measured as a function of time. In the marine environment, and especially in the suspended material, increasing importance is being given to the presence of organic micropollutants, particularly since some are known to be carcinogenic. As the number of measured parameters increases examining the data and their consequent interpretation becomes more difficult. To overcome such difficulties, numerous chemometric techniques have been introduced in environmental chemistry, such as Multivariate Data Analysis (MVDA), Principal Component Analysis (PCA) and Partial Least Squares Regression (PLSR). The use of the first technique in this work has been applied to the interpretation of the quality of Augusta bay, by measuring the concentration of numerous organic micropollutants, together with the classical water pollution parameters, in different sites and at different times. The MVDA has highlighted the difference between various sampling sites whose data were initially thought to be similar. Furthermore, it has allowed a choice of more significant parameters for future monitoring and more suitable sampling site locations.

Non-steady variations of SOD and phosphate release rate due to changes in the quality of the overlying water

2000 ◽  
Vol 42 (3-4) ◽  
pp. 265-272 ◽  
Author(s):  
T. Inoue ◽  
Y. Nakamura ◽  
Y. Adachi
Keyword(s):  
Release Rate ◽  
Oxygen Demand ◽  
Phosphate Concentration ◽  
Sediment Oxygen Demand ◽  
Biochemical Reactions ◽  
Overlying Water ◽  
Phosphate Release ◽  
Do Concentration ◽  
The Difference

A dynamic model, which predicts non-steady variations in the sediment oxygen demand (SOD) and phosphate release rate, has been designed. This theoretical model consists of three diffusion equations with biochemical reactions for dissolved oxygen (DO), phosphate and ferrous iron. According to this model, step changes in the DO concentration and flow velocity produce drastic changes in the SOD and phosphate release rate within 10 minutes. The vigorous response of the SOD and phosphate release rate is caused by the difference in the time scale of diffusion in the water boundary layer and that of the biochemical reactions in the sediment. Secondly, a negative phosphate transfer from water to sediment can even occur under aerobic conditions. This is caused by the decrease in phosphate concentration in the aerobic layer due to adsorption.

Sign in / Sign up

Export Citation Format

Share Document