The Impact of the Philtrum on Facial Attractiveness, Perioral Proportions, and Perceptions of Facial Aging

2020 ◽  
Author(s):  
Diogo Nunes ◽  
Gregor Bran
Keyword(s):  
Soft Tissue ◽  
Young Woman ◽  
State Of The Art ◽  
Facial Appearance ◽  
Upper Lip ◽  
Facial Aging ◽  
Population Demographics ◽  
Facial Proportions ◽  
The Impact ◽  
Caucasian Female

Abstract Background Lip enhancement continues to be one of the most popular facial procedures. State-of-the-art lip enhancement involves sculpting of perilabial soft tissue, in particular, the philtrum, but it is unclear how patients perceive their philtral contours. Objectives The aim of this study was to test the impact of the philtrum on attractiveness, and on the perception of facial proportions and age. Methods Respondents (1100, including 50 aesthetic specialists) were presented with 2 sets of identical portraits, 1 set of a young Caucasian female and 1 set of an aged Caucasian female, with 1 portrait in each set having an upper lip lacking any philtral contours. The respondents were asked to choose which upper lip was more attractive, appeared longer, and looked older. Rankings were analyzed according to population demographics. Results Overall, most respondents considered the young face (84%) and the aged face (68%) with philtral contours to be more attractive. Moreover, the majority of respondents (81%) considered the upper lip of the young face without a philtrum to appear longer in a craniocaudal orientation (67% for the aged image), and 67% of respondents described the image of the young woman with no philtral definition as appearing older (55% for the aged face with no philtrum). Conclusions This study confirms the authors’ hypothesis that the existence of philtral contours exerts a significant impact on perioral attractiveness, and that its absence can be related to a longer appearance of the upper lip as well as an older facial appearance.

scholarly journals The Impact of Asymmetric Left and Asymmetric Right Face Images on Accurate Age Estimation

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Muhammad Sajid ◽  
Naeem Iqbal Ratyal ◽  
Nouman Ali ◽  
Bushra Zafar ◽  
Saadat Hanif Dar ◽  
...  
Keyword(s):  
Age Estimation ◽  
State Of The Art ◽  
Face Image ◽  
Facial Aging ◽  
Face Images ◽  
Left And Right ◽  
Sleeping Habits ◽  
The Impact ◽  
Asymmetric Aging ◽  
Sun Light

Aging affects left and right half face differently owing to numerous factors such as sleeping habits, exposure to sun light, and weaker face muscles of one side of face. In computer vision, age of a given face image is estimated using features that are correlated with age, such as moles, scars, and wrinkles. In this study we report the asymmetric aging of the left and right sides of face images and its impact on accurate age estimation. Left symmetric faces were perceived as younger while right symmetric faces were perceived as older when presented to the state-of-the-art age estimator. These findings show that facial aging is an asymmetric process which plays role in accurate facial age estimation. Experimental results on two large datasets verify the significance of using asymmetric right face image to estimate the age of a query face image more accurately compared to the corresponding original or left asymmetric face image.

scholarly journals Morphometry and displacement analysis of the upper lips following maxillary full-arch implant-supported fixed prostheses: a 3D morphometric study

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Keyi Hao ◽  
Jia Luo ◽  
Ping Di ◽  
Yu Zhang ◽  
Ye Lin
Keyword(s):  
Soft Tissue ◽  
Relative Position ◽  
Integration Method ◽  
Morphological Changes ◽  
Average Distance ◽  
Morphological Alteration ◽  
Morphometric Study ◽  
Upper Lip ◽  
3D Integration ◽  
The Impact

Abstract Background With the emergence of three-dimensional (3D) integration technology, analysis of soft tissue displacement and morphological changes after maxillary full-arch implant-supported fixed prostheses can be performed. The aim of this study was to verify the feasibility of the 3D integration method for constructing the relative position of the prostheses and facial soft tissue, evaluate the displacement and morphological variation of the upper lips after maxillary full-arch implant-supported fixed prostheses. Methods Twenty-five maxillary edentulous patients were recruited in this study. At the time of final prosthesis delivery, the 3D prostheses data and three 3D facial profiles were integrated. After method validation, the 3D position changes of seven soft tissue landmarks were used to reflect the 25 upper lips. The variation of four morphological distances were analyzed to reflect the morphological alteration of the upper lips. Two pairs of dentofacial landmarks were used to analyze the sagittal relative position of the prostheses and soft tissue. The included patients were also grouped to determine the impact of sex, upper lip thickness, and length on lip support changes. Results The average distance of the two matched relative reliable forehead regions was only 0.32 mm. The sagittal shifts of labrale superius (LS), stomion (STO), crista philtri left (CPHL) and crista philtri right (CPHR) were 3.44 ± 1.39 mm, 2.52 ± 1.38 mm, 3.04 ± 1.18 mm, and 3.12 ± 1.21 mm, respectively. With the exception of the decrease in the length of subnasale (SN)-LS, the length of cheilion right (CHR)-cheilion left (CHL), CPHR-CPHL, and LS-STO significantly increased. The two pairs of dentofacial landmarks had strong positive movement correlations along the sagittal direction. Patients with thinner and longer lips showed more lip support than those with thicker and shorter lips by a clinically insignificant amount. Conclusions The integration method of 3D facial and dental data showed high repeatability in constructing the dentofacial relative position. The linear equations reflecting dentofacial relative position could aid clinicians in evaluating the restoration effect and estimate the upper lip variation.

scholarly journals Soft tissue response after Class III bimaxillary surgery

2012 ◽  
Vol 83 (3) ◽  
pp. 533-539 ◽  
Author(s):  
Gundega Jakobsone ◽  
Arild Stenvik ◽  
Lisen Espeland
Keyword(s):  
Soft Tissue ◽  
Tissue Response ◽  
Hard Tissue ◽  
Upper Lip ◽  
Short Term ◽  
Face Height ◽  
Soft Tissue Response ◽  
The Impact

ABSTRACT Objective: To analyze the impact of surgical change in anterior face height and skeletal relapse on the long-term soft tissue profile. Materials and Methods: Cephalometric radiographs of 81 patients taken before surgery and at five time points during a 3-year follow-up period were analyzed. All patients had Le Fort I and bilateral sagittal split osteotomies. The patients were divided into three subgroups according to the change in anterior face height during surgery. Calculations of soft to hard tissue ratios were based on the long-term soft tissue response relative to the surgical repositioning. Results: The horizontal surgical repositioning varied considerably, depending on whether anterior face height was increased or decreased. For upper lip prominence, the pattern of long-term change was the same irrespective of change in face height. In all groups, upper lip thickness decreased in both the short term and the long term, particularly in patients with surgical increase in face height. Lower lip thickness increased in the short term but decreased during the follow-up period. There were significant associations between horizontal soft tissue and corresponding hard tissue changes, except for soft tissue A-point and upper lip, when face height was increased. The ratios were higher for mandibular variables than for maxillary variables, particularly for B-point and pogonion when anterior face height had decreased. Conclusion: A change in facial height influences the soft tissue response. The mandibular soft tissues closely follow skeletal relapse beyond 2 months postsurgery. The findings have clinical implications for the relative maxillary and mandibular repositioning when planning surgery.

Smoking status and attractiveness among identical twins discordant for smoking

2017 ◽  
Author(s):  
Andy Skinner ◽  
Andy ◽  
Ian Penton-Voak ◽  
Marcus Robert Munafo
Keyword(s):  
Behaviour Change ◽  
Smoking Status ◽  
Smoking Behaviour ◽  
Identical Twins ◽  
Facial Appearance ◽  
Same Sex ◽  
Facial Aging ◽  
Male And Female ◽  
Separate Sample ◽  
Behaviour Change Interventions

Background and aims: Smoking is associated with negative health of skin and increased signs of facial aging. We aimed to address two questions about smoking and appearance: 1) how does smoking affect the attractiveness of faces, and 2) does facial appearance alone provide an indication of smoking status?Methods: Faces of identical twins discordant for smoking were averaged to make male and female smoking and non-smoking prototypes faces. In Task 1, we presented same sex smoking and non-smoking prototypes side-by-side and participants (n=590) indicated which face was more attractive. Participants were blind to prototype smoking status. In Task 2 a separate sample (n=580) indicated which prototype was the smoker.Results: In Task 1 both male and female participants judged non-smoking prototypes more attractive, irrespective of the sex of the prototype face. In Task 2, both male and female participants selected the smoking prototype as the smoker more often, again irrespective of the sex of the prototype face.Conclusions: Our findings provide evidence that smoking may negatively impact facial appearance, and that facial appearance alone may be sufficient to indicate smoking status. We discuss the possible use of these findings in smoking behaviour change interventions.

scholarly journals Comparison of Industrial Quenching Oils

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 250
Author(s):  
Jiří Hájek ◽  
Zaneta Dlouha ◽  
Vojtěch Průcha
Keyword(s):  
State Of The Art ◽  
Cooling Capacity ◽  
Steel Grade ◽  
Cooling Curves ◽  
Cooling Process ◽  
Industrial Practice ◽  
Product Size ◽  
Cct Curve ◽  
Hardening Power ◽  
The Impact

This article is a response to the state of the art in monitoring the cooling capacity of quenching oils in industrial practice. Very often, a hardening shop requires a report with data on the cooling process for a particular quenching oil. However, the interpretation of the data can be rather difficult. The main goal of our work was to compare various criteria used for evaluating quenching oils. Those of which prove essential for operation in tempering plants would then be introduced into practice. Furthermore, the article describes monitoring the changes in the properties of a quenching oil used in a hardening shop, the effects of quenching oil temperature on its cooling capacity and the impact of the water content on certain cooling parameters of selected oils. Cooling curves were measured (including cooling rates and the time to reach relevant temperatures) according to ISO 9950. The hardening power of the oil and the area below the cooling rate curve as a function of temperature (amount of heat removed in the nose region of the Continuous cooling transformation - CCT curve) were calculated. V-values based on the work of Tamura, reflecting the steel type and its CCT curve, were calculated as well. All the data were compared against the hardness and microstructure on a section through a cylinder made of EN C35 steel cooled in the particular oil. Based on the results, criteria are recommended for assessing the suitability of a quenching oil for a specific steel grade and product size. The quenching oils used in the experiment were Houghto Quench C120, Paramo TK 22, Paramo TK 46, CS Noro MO 46 and Durixol W72.

scholarly journals Smoothing additive manufactured parts using ns-pulsed laser radiation

2021 ◽  
Author(s):  
Florian Kuisat ◽  
Fernando Lasagni ◽  
Andrés Fabián Lasagni
Keyword(s):  
Surface Roughness ◽  
Mechanical Performance ◽  
State Of The Art ◽  
Pulsed Laser ◽  
Industrial Applications ◽  
Laser Source ◽  
Pulsed Laser Radiation ◽  
Current State ◽  
The Impact

AbstractIt is well known that the surface topography of a part can affect its mechanical performance, which is typical in additive manufacturing. In this context, we report about the surface modification of additive manufactured components made of Titanium 64 (Ti64) and Scalmalloy®, using a pulsed laser, with the aim of reducing their surface roughness. In our experiments, a nanosecond-pulsed infrared laser source with variable pulse durations between 8 and 200 ns was applied. The impact of varying a large number of parameters on the surface quality of the smoothed areas was investigated. The results demonstrated a reduction of surface roughness Sa by more than 80% for Titanium 64 and by 65% for Scalmalloy® samples. This allows to extend the applicability of additive manufactured components beyond the current state of the art and break new ground for the application in various industrial applications such as in aerospace.

scholarly journals Esthetic Considerations in Orthodontics: An Overview

2021 ◽  
Author(s):  
Swati Singh ◽  
Litesh Singla ◽  
Tanya Anand
Keyword(s):  
Soft Tissue ◽  
Profile Analysis ◽  
Dental Occlusion ◽  
Facial Profile ◽  
Mandibular Plane ◽  
The Face ◽  
Facial Proportions ◽  
Posterior Position ◽  
Anterior Posterior ◽  
The Ideal

Abstract Esthetics has been an ever-evolving concept and has gained considerable importance in the field of orthodontics in the last few decades. The re-emergence of the soft tissue paradigm has further catapulted the interest of the orthodontist. So much so that achieving a harmonious profile and an esthetically pleasing smile has become the ideal goal of treatment and is no longer secondary to achieving a functional dental occlusion and/or a rigid adherence to skeletal and dental norms. Esthetics in the orthodontic sense can be divided into three categories: macroesthetics, miniesthetics, and microesthetics. Macroesthetics includes the evaluation of the face and involves frontal assessment and profile analysis. The frontal assessment involves assessment of facial proportions, while the profile analysis involves evaluation of anterior–posterior position of jaws, mandibular plane, and incisor prominence and lip posture. Miniesthetics involves study of the smile framework involving the vertical tooth–lip relationship, smile type, transverse dimensions of smile, smile arc, and midline. Microesthetics involves the assessment of tooth proportions, height-width relationships, connectors and embrasures, gingival contours and heights, and tooth shade and color. The harmony between these factors enables an orthodontist to achieve the idealized esthetic result and hence these parameters deserve due consideration. The importance placed on a pleasing profile cannot be undermined and the orthodontist should aim for a harmonious facial profile over rigid adherence to standard average cephalometric norms. This article aims to give an overview of the macro, mini, and microesthetic considerations in relation to orthodontic diagnosis and treatment planning.

scholarly journals Cash Flow Bullwhip—Literature Review and Research Perspectives

Logistics ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 8
Author(s):  
Hicham Lamzaouek ◽  
Hicham Drissi ◽  
Naima El Haoud
Keyword(s):  
Literature Review ◽  
Customer Service ◽  
Cash Flow ◽  
State Of The Art ◽  
Research Work ◽  
Bullwhip Effect ◽  
Research Perspectives ◽  
Financial Perspective ◽  
The Impact ◽  
Exhaustive List

The bullwhip effect is a pervasive phenomenon in all supply chains causing excessive inventory, delivery delays, deterioration of customer service, and high costs. Some researchers have studied this phenomenon from a financial perspective by shedding light on the phenomenon of cash flow bullwhip (CFB). The objective of this article is to provide the state of the art in relation to research work on CFB. Our ambition is not to make an exhaustive list, but to synthesize the main contributions, to enable us to identify other interesting research perspectives. In this regard, certain lines of research remain insufficiently explored, such as the role that supply chain digitization could play in controlling CFB, the impact of CFB on the profitability of companies, or the impacts of the omnichannel commerce on CFB.

scholarly journals Assessing the Impact of the Loss Function, Architecture and Image Type for Deep Learning-Based Wildfire Segmentation

2021 ◽  
Vol 11 (15) ◽  
pp. 7046
Author(s):  
Jorge Francisco Ciprián-Sánchez ◽  
Gilberto Ochoa-Ruiz ◽  
Lucile Rossi ◽  
Frédéric Morandini
Keyword(s):  
Deep Learning ◽  
Loss Function ◽  
State Of The Art ◽  
Fire Detection ◽  
Loss Functions ◽  
Wildfire Spread ◽  
Combine Information ◽  
The Impact ◽  
Image Type ◽  
Segmentation Models

Wildfires stand as one of the most relevant natural disasters worldwide, particularly more so due to the effect of climate change and its impact on various societal and environmental levels. In this regard, a significant amount of research has been done in order to address this issue, deploying a wide variety of technologies and following a multi-disciplinary approach. Notably, computer vision has played a fundamental role in this regard. It can be used to extract and combine information from several imaging modalities in regard to fire detection, characterization and wildfire spread forecasting. In recent years, there has been work pertaining to Deep Learning (DL)-based fire segmentation, showing very promising results. However, it is currently unclear whether the architecture of a model, its loss function, or the image type employed (visible, infrared, or fused) has the most impact on the fire segmentation results. In the present work, we evaluate different combinations of state-of-the-art (SOTA) DL architectures, loss functions, and types of images to identify the parameters most relevant to improve the segmentation results. We benchmark them to identify the top-performing ones and compare them to traditional fire segmentation techniques. Finally, we evaluate if the addition of attention modules on the best performing architecture can further improve the segmentation results. To the best of our knowledge, this is the first work that evaluates the impact of the architecture, loss function, and image type in the performance of DL-based wildfire segmentation models.

Sign in / Sign up

Export Citation Format

Share Document