scholarly journals Enhanced keratin extraction from wool waste using a deep eutectic solvent

2021 ◽  
Author(s):  
Oseweuba Valentine Okoro ◽  
Hafez Jafari ◽  
Parinaz Hobbi ◽  
Lei Nie ◽  
Houman Alimoradi ◽  
...  

AbstractIn this study, the solubilisation of waste coarse wool as a precursory step for the large scale valorisation of keratin was investigated using a green deep eutectic solvent (DES) based on L-cysteine and lactic acid. The investigation was undertaken via the response surface methodology and based on the Box-Behnken design for four process variables of temperature (70-110 °C), dissolution time (2-10 h), the mass of L-cysteine (0.5-2.5 g) in 20 mL of lactic acid, and wool load in the DES (0.2-0.6 g). The effect of variations in temperature was established to be the most significant process variable influencing keratin yield from waste coarse wool in the current work. An optimum keratin yield (93.77 wt.%) was obtained at the temperature of 105 °C, 8 h dissolution time, with 1.6 g L-cysteine in 20 mL of lactic acid using 0.5 g of wool. This study suggests L-cysteine and lactic acid as a green solvent with the potential to scale up keratin recovery from waste wool without significant destruction in the structure of the recovered keratin.HighlightsKeratin recovery from wool using deep eutectic solvent was assessedThe basis for the use of the new deep eutectic solvent was discussedThe effects of the process variables on keratin yield were exploredKeratin recovered was optimised and characterised.

2009 ◽  
Vol 62 (4) ◽  
pp. 341 ◽  
Author(s):  
Andrew P. Abbott ◽  
John Collins ◽  
Ian Dalrymple ◽  
Robert C. Harris ◽  
Reena Mistry ◽  
...  

The present paper describes the design and operation of the first large-scale extraction and separation of metals from a complex matrix using an ionic liquid. The liquid was a deep eutectic solvent based on choline chloride. The hydrogen-bond donors were mixed to optimize solubility and fluid viscosity. It was found that the incorporation of a fine particulate dust actually decreased the viscosity of the fluid. The present paper shows that selective extraction of zinc and lead can be achieved through judicious choice of the hydrogen-bond donor and it is also shown that metals in solution can be separated using cementation with zinc powder. Electrowinning of pure zinc is demonstrated but scale-up tests suggest that the process is relatively slow and has poor current efficiency. An alternative methodology was developed to rapidly recover the zinc from solution using dilute ammonia solution. It is also shown for the first time that cementation can be efficiently carried out in ionic liquids because the recovered metal is porous and allows thick layers to be deposited.


Author(s):  
Barnali Mandal

ABSTRACTObjectives: The aim of the study was to determine the growth kinetics of Pediococcus acidilactici using a mathematical model for large scale pediocinproduction.Methods: Growth kinetics of P. acidilactici has been studied for pediocin production in small scale batch fermenter (Erlenmeyer flask) using meatprocessing waste medium. The experiments have been conducted with varying the concentrations of glucose, protein, and lactic acid. A mathematicalmodel has been developed to describe growth rate, products (pediocin and lactic acid) formation rate, and substrates (glucose and protein) utilizationrate. Monod model for dual substrates (glucose and protein) has been used with considering lactic acid inhibition. Luedeking-Piret model has beenintroduced to describe the production of pediocin and lactic acid.Results: The values of kinetic parameters have been determined using experimental data and model equations. The model prediction has beencompared satisfactorily with the experimental data for the validation of the model.Conclusions: The developed model was satisfactorily validated to scale up the production of pediocin.Keywords: Pediococcus acidilactici, Pediocin, Meat processing waste, Monod model, Luedeking-Piret model, Kinetic parameters.


2020 ◽  
Vol 24 (1) ◽  
pp. 11-16
Author(s):  
Islamudin Ahmad ◽  
Wisnu Cahyo Prabowo

Kadamba (Mitragyna speciosa Korth Havil) merupakan salah satu tumbuhan endemik di Asia Tenggara, di Indonesia, tumbuhan ini banyak di jumpai di pulau Kalimantan. Tumbuhan ini dipercaya oleh masyarakat dapat mengobati berbagai macam penyakit. Namun, karena kandungan alkaloidnya, tumbuhan ini dilarang digunakan sebagai bahan baku obat herbal oleh Badan Pengawas Obat dan Makanan. Oleh karena itu, perlu dilakukan pengembangan metode ekstraksi untuk menarik senyawa metabolit sekunder target dan meminimalkan senyawa yang tidak diinginkan yaitu dengan menggunakan metode ekstraksi berbantu mikrowave dengan pelarut hijau (Natural Deep Eutectic Solvent) yang dioptimasi menggunakan response surface methodology (RSM). Simplisia kering daun Kadamba diekstraksi menggunakan metode ekstraksi berbantu mikrowave dengan pelarut hijau (asam sitrat-glukosa) dengan berbagai kondisi ekstraksi dengan empat faktor dan tiga level (Box Behnken Design) yang dioptimasi menggunakan RSM dengan aplikasi perangkat lunak Design Expert versi 12 berlisensi. Penetapan kadar polifenol total dilakukan menggunakan reagen Folin-Ciocalteau dan diukur absorbansinya pada spektrofotometer UV-Vis pada panjang gelombang 770 nm, serta asam gallat sebagai standar. Berdasarkan hasil penelitian, diperoleh kondisi optimum pada perbandingan rasio pelarut NADES (asam sitrat : glukosa) 5:1 g/g, rasio pelarut-sampel sebesar 1:20 g/mL, waktu ekstraksi selama 20 menit dan kekuatan gelombang mikro sebesar 30% dengan kadar polifenol total prediksi sebesar 314,924 ±35,95 mg GAE/g sampel, sedangkan dari hasil proses verifikasi (scale-up confirmation) yaitu dengan meningkatkan jumlah sampel yang digunakan sebanyak sepuluh kali lipat dengan Kadar polifenol total diperoleh  sebesar 427,12 ±35,95 mg GAE/g. Penelitian ini merupakan langkah awal dalam pengembangan metode ekstraksi untuk memperoleh senyawa target secara cepat, mudah, efisien, dan ramah lingkungan.


Author(s):  
S. Pragati ◽  
S. Kuldeep ◽  
S. Ashok ◽  
M. Satheesh

One of the situations in the treatment of disease is the delivery of efficacious medication of appropriate concentration to the site of action in a controlled and continual manner. Nanoparticle represents an important particulate carrier system, developed accordingly. Nanoparticles are solid colloidal particles ranging in size from 1 to 1000 nm and composed of macromolecular material. Nanoparticles could be polymeric or lipidic (SLNs). Industry estimates suggest that approximately 40% of lipophilic drug candidates fail due to solubility and formulation stability issues, prompting significant research activity in advanced lipophile delivery technologies. Solid lipid nanoparticle technology represents a promising new approach to lipophile drug delivery. Solid lipid nanoparticles (SLNs) are important advancement in this area. The bioacceptable and biodegradable nature of SLNs makes them less toxic as compared to polymeric nanoparticles. Supplemented with small size which prolongs the circulation time in blood, feasible scale up for large scale production and absence of burst effect makes them interesting candidates for study. In this present review this new approach is discussed in terms of their preparation, advantages, characterization and special features.


2020 ◽  
Vol 27 (2) ◽  
pp. 105-110 ◽  
Author(s):  
Niaz Ahmad ◽  
Muhammad Aamer Mehmood ◽  
Sana Malik

: In recent years, microalgae have emerged as an alternative platform for large-scale production of recombinant proteins for different commercial applications. As a production platform, it has several advantages, including rapid growth, easily scale up and ability to grow with or without the external carbon source. Genetic transformation of several species has been established. Of these, Chlamydomonas reinhardtii has become significantly attractive for its potential to express foreign proteins inexpensively. All its three genomes – nuclear, mitochondrial and chloroplastic – have been sequenced. As a result, a wealth of information about its genetic machinery, protein expression mechanism (transcription, translation and post-translational modifications) is available. Over the years, various molecular tools have been developed for the manipulation of all these genomes. Various studies show that the transformation of the chloroplast genome has several advantages over nuclear transformation from the biopharming point of view. According to a recent survey, over 100 recombinant proteins have been expressed in algal chloroplasts. However, the expression levels achieved in the algal chloroplast genome are generally lower compared to the chloroplasts of higher plants. Work is therefore needed to make the algal chloroplast transformation commercially competitive. In this review, we discuss some examples from the algal research, which could play their role in making algal chloroplast commercially successful.


2021 ◽  
Vol 102 (8) ◽  
pp. 8-13
Author(s):  
Thomas Hatch

Taking advantage of the possibilities for learning outside of school requires us to build on what we know about why it is so hard to sustain and scale up unconventional educational experiences within conventional schools. To illustrate the opportunities and challenges, Thomas Hatch describes a large-scale approach to project-based learning developed in a camp in New Hampshire and incorporated in a Brooklyn school, a trip-based program in Detroit, and Singapore’s systemic embrace of learning outside school. By understanding the conditions that can sustain alternative instructional practices, educators can find places to challenge the boundaries of schooling and create visions of the possible that exceed current constraints.


2021 ◽  
pp. 037957212098250
Author(s):  
Jennifer K. Foley ◽  
Kristina D. Michaux ◽  
Bho Mudyahoto ◽  
Laira Kyazike ◽  
Binu Cherian ◽  
...  

Background: Micronutrient deficiencies affect over one quarter of the world’s population. Biofortification is an evidence-based nutrition strategy that addresses some of the most common and preventable global micronutrient gaps and can help improve the health of millions of people. Since 2013, HarvestPlus and a consortium of collaborators have made impressive progress in the enrichment of staple crops with essential micronutrients through conventional plant breeding. Objective: To review and highlight lessons learned from multiple large-scale delivery strategies used by HarvestPlus to scale up biofortification across different country and crop contexts. Results: India has strong public and private sector pearl millet breeding programs and a robust commercial seed sector. To scale-up pearl millet, HarvestPlus established partnerships with public and private seed companies, which facilitated the rapid commercialization of products and engagement of farmers in delivery activities. In Nigeria, HarvestPlus stimulated the initial acceptance and popularization of vitamin A cassava using a host of creative approaches, including “crowding in” delivery partners, innovative promotional programs, and development of intermediate raw material for industry and novel food products. In Uganda, orange sweet potato (OSP) is a traditional subsistence crop. Due to this, and the lack of formal seed systems and markets, HarvestPlus established a network of partnerships with community-based nongovernmental organizations and vine multipliers to popularize and scale-up delivery of OSP. Conclusions: Impact of biofortification ultimately depends on the development of sustainable markets for biofortified seeds and products. Results illustrate the need for context-specific, innovative solutions to promote widespread adoption.


2020 ◽  
Vol 8 (Suppl 3) ◽  
pp. A141-A141
Author(s):  
Yumi Ohtani ◽  
Kayleigh Ross ◽  
Aditya Dandekar ◽  
Rashid Gabbasov ◽  
Michael Klichinsky

BackgroundWe have previously developed CAR-M as a novel cell therapy approach for the treatment of solid tumors.1 CAR-M have the potential to overcome key challenges that cell therapies face in the solid tumor setting – tumor infiltration, immunosuppression, lymphocyte exclusion – and can induce epitope spreading to overcome target antigen heterogeneity. While macrophages transduced with the adenoviral vector Ad5f35 (Ad CAR-M) traffic to tumors, provide robust anti-tumor activity, and recruit and activate T cells, we sought to identify a robust non-viral method of macrophage engineering in order to reduce the cost of goods, manufacturing complexity, and potential immunogenicity associated with viral vectors.MethodsAs innate immune cells, macrophages detect exogenous nucleic acids and respond with inflammatory and apoptotic programs. Thus, we sought to identify a means of mRNA delivery that avoids recognition by innate immune sensors. We screened a broad panel of mRNA encoding an anti-HER2 CAR comprising multiplexed 5’Cap and base modifications using an optimized and scalable electroporation approach and evaluated the impact of interferon-β priming on CAR-M phenotype and function.ResultsWe identified the optimal multiplexed mRNA modifications that led to maximal macrophage viability, transfection efficiency, intensity of CAR expression, and duration of expression. Non-viral HER2 CAR-M phagocytosed and killed human HER2+ tumor cells. Unlike Ad CAR-M, mRNA CAR-M were not skewed toward an M1 state by mRNA electroporation. Priming non-viral CAR-M with IFN-β induced a durable M1 phenotype, as shown by stable upregulation of numerous M1 markers and pathways. IFN-β priming significantly enhanced the anti-tumor activity of CAR but not control macrophages. IFN-β primed mRNA CAR-M were resistant to M2 conversion, maintaining an M1 phenotype despite challenge with various immunosuppressive factors, and converted bystander M2 macrophages toward M1. Interestingly, priming mRNA CAR-M with IFN-β significantly enhanced the persistence of CAR expression, overcoming the known issue of rapid mRNA turnover. RNA-seq analysis revealed that IFN-β priming affected pathways involved in increasing translation and decreasing RNA degradation in human macrophages.ConclusionsWe have established a novel, optimized non-viral CAR-M platform based on chemically modified mRNA and IFN-β priming. IFN-β priming induced a durable M1 phenotype, improved CAR expression, improved CAR persistence, led to enhanced anti-tumor function, and rendered resistance to immunosuppressive factors. This novel platform is amenable to scale-up, GMP manufacturing, and represents an advance in the development of CAR-M.ReferenceKlichinsky M, Ruella M, Shestova O, et al. Human chimeric antigen receptor macrophages for cancer immunotherapy. Nat Biotechnol 2020;38(8):947–953.


Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2149
Author(s):  
Chan-Woo Park ◽  
Song-Yi Han ◽  
Rajkumar Bandi ◽  
Ramakrishna Dadigala ◽  
Eun-Ah Lee ◽  
...  

In this study, the effect of lignin esterification with fatty acid chloride on the properties of lignin and lignin/poly(lactic acid) (PLA) composites was investigated. Lignocellulose (Pinus densiflora S. et Z.) was treated using a deep eutectic solvent (DES) with choline chloride (ChCl)/lactic acid (LA). From the DES-soluble fraction, DES-lignin (DL) was isolated by a regeneration process. Lignin esterification was conducted with palmitoyl chloride (PC). As the PC loading increased for DL esterification, the Mw of esterified DL (EDL) was increased, and the glass transition temperature (Tg) was decreased. In DL or EDL/PLA composite films, it was observed that EDL/PLA had cleaner and smoother morphological characteristics than DL/PLA. The addition of DL or EDL in a PLA matrix resulted in a deterioration of tensile properties as compared with neat PLA. The EDL/PLA composite film had a higher tensile strength and elastic modulus than the DL/PLA composite film. DL esterification decreased water absorption with lower water diffusion coefficients. The effect of lignin esterification on improving the compatibility of lignin and PLA was demonstrated. These results are expected to contribute to the development of high-strength lignin composites.


Sign in / Sign up

Export Citation Format

Share Document