Coloration of aluminum pigment using SiO2 and γ-glycidoxypropyltrimethoxysilane with dichlorotriazine reactive dye

2016 ◽  
Vol 45 (5) ◽  
pp. 335-345 ◽  
Author(s):  
Benjamin Tawiah ◽  
Liping Zhang ◽  
Anli Tian ◽  
Shai Shao Fu
Keyword(s):  
Electron Microscope ◽  
Reaction Mechanism ◽  
Chemical Stability ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Reactive Dye ◽  
Content Type ◽  
X Ray ◽  
Aluminium Pigment ◽  
Aluminum Pigment

Purpose The purpose of this paper is to colour aluminium pigment to the highest chroma using SiO2 and organic silane with dichlorotriazine reactive dye and investigate its reaction mechanism, chemical stability and thermal properties to improve its applicability in surface coatings. Design/methodology/approach Aluminium pigment was encapsulated by the catalysed sol-gel method using SiO2, followed by modification with γ-glycidoxypropyltrimethoxysilane (GPTMS). Purified reactive dye (1-Amino-4-[3-(4,6-dichlorotriazin-2-ylamino)-4-sulfophenylamino]anthraquinone-2-sulfonic acid (X-BR)) was covalently immobilized onto modified SiO2 to obtain coloured aluminium pigment. The reaction mechanism, chemical stability and thermophysical properties were investigated by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscope, transmission electron microscope and thermogravimetric analyses (TGA). Findings The results showed that X-BR was covalently attached to modified Al/SiO2 with maximum colour grafting of 95 per cent when the dosage of GPTMS and X-BR per weight of modified Al/SiO2 was 25 and 15 per cent, respectively, at pH 8.5 and a temperature of 40°C. The coloured aluminium pigment had good chemical stability with excellent anti-migration properties in many solvents. Research limitations/implications The organic silane used required a careful control of pH to ensure maximum colour grafting efficiency meanwhile other silanes with amine groups could also be used effectively with different kinds of colorants besides reactive dyes. Practical implications The method used is less cumbersome and provides a simple route to preparing coloured aluminium pigment. Originality/value The use of organic-inorganic SiO2/γ- GPTMS with purified reactive dye to covalently colour aluminium pigment to the highest chroma is novel and will help advance the frontiers of knowledge on coloration of aluminium pigments.

scholarly journals Preparation and Characterization of Visible-Light-Activated Fe-N Co-Doped TiO2and Its Photocatalytic Inactivation Effect on Leukemia Tumors

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Kangqiang Huang ◽  
Li Chen ◽  
Jianwen Xiong ◽  
Meixiang Liao
Keyword(s):  
Electron Microscope ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Light Therapy ◽  
Cell Counting ◽  
Visible Absorption ◽  
X Ray ◽  
Photocatalytic Inactivation ◽  
Inactivation Efficiency ◽  
Co Doped

The Fe-N co-doped TiO2nanocomposites were synthesized by a sol-gel method and characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), ultraviolet-visible absorption spectroscopy (UV-vis) and X-ray photoelectron spectroscopy (XPS). Then the photocatalytic inactivation of Fe-N-doped TiO2on leukemia tumors was investigated by using Cell Counting Kit-8 (CCK-8) assay. Additionally, the ultrastructural morphology and apoptotic percentage of treated cells were also studied. The experimental results showed that the growth of leukemic HL60 cells was significantly inhibited in groups treated with TiO2nanoparticles and the photocatalytic activity of Fe-N-TiO2was significantly higher than that of Fe-TiO2and N-TiO2, indicating that the photocatalytic efficiency could be effectively enhanced by the modification of Fe-N. Furthermore, when 2 wt% Fe-N-TiO2nanocomposites at a final concentration of 200 μg/mL were used, the inactivation efficiency of 78.5% was achieved after 30-minute light therapy.

scholarly journals Synthesis, Electronic Structure, and Electrochemical Properties of the Cubic Mg2MnO4 Spinel with Porous-Spongy Structure

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1122
Author(s):  
Zhenyan Wang ◽  
He Zhu ◽  
Li Ai ◽  
Jimin Ding ◽  
Pengfei Zhu ◽  
...  
Keyword(s):  
Electronic Structure ◽  
Electron Microscope ◽  
Electrochemical Properties ◽  
Photoelectron Spectroscopy ◽  
Annealing Temperature ◽  
Coulombic Efficiency ◽  
Sol Gel ◽  
Chelating Agent ◽  
Discharge Performance ◽  
X Ray

Mg2MnO4 nanoparticles with cubic spinel structure were synthesized by the sol-gel method using polyvinyl alcohol (PVA) as a chelating agent. X-ray powder diffraction, infrared spectrum (IR), scanning electron microscope (SEM), and transmission electron microscope (TEM) were used to characterize the crystalline phase and particle size of as-synthesized nanoparticles. The electronic structure of Mg2MnO4 spinel was studied by X-ray photoelectron spectroscopy (XPS). The results showed that pure cubic Mg2MnO4 spinel nanoparticles were obtained when the annealing temperature was 500–700 °C. The samples had a porous-spongy structure assembled by nanoparticles. XPS studies indicated that Mg2MnO4 nanoparticles were mixed spinel structures and the degree of cation inversion decreased with increasing annealing temperature. Furthermore, the performance of Mg2MnO4 as lithium anode material was studied. The results showed that Mg2MnO4 samples had good cycle stability except for the slight decay in the capacity at 50 cycles. The coulombic efficiency (ratio of discharge and charge capacity) in most cycles was near 100%. The sample annealed at 600 °C exhibited good electrochemical properties, the first discharge capacity was 771.5 mAh/g, and the capacity remained 340 mAh/g after 100 cycles. The effect of calcination temperature on the charge–discharge performance of the samples was studied and discussed.

Ti-Co mixed oxide as photocatalysts in the generation of hydrogen from water

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Alejandro Pérez-Larios ◽  
Isabel Torres-Ramos ◽  
Rodolfo Zanella ◽  
José Luis Rico
Keyword(s):  
Electron Microscope ◽  
Photoelectron Spectroscopy ◽  
Mixed Oxides ◽  
Uv Light ◽  
Energy Dispersive Spectrometer ◽  
Sol Gel ◽  
X Ray ◽  
Surface Areas ◽  
Vis Spectroscopy ◽  
Xrd Patterns

Abstract The effect of Co into the titanium oxide matrix as photocatalysts in the generation of hydrogen from water is herein reported. Ti–Co mixed oxides and pure titania were synthetized by sol-gel. The Co content was 0, 1, 3, 5, and 10 wt.%. The solids were characterized by Scanning electron microscope-energy dispersive spectrometer (SEM-EDS), N2 physisorption, X-ray difrraction (XRD), ultraviolet visible spectroscopy (UV–Vis), spectroscopy Raman, X-ray photoelectron spectroscopy (XPS) spectroscopy and High resolution transmission electron microscope (HRTEM). The results showed that the mixed oxides show larger specific surface areas (73–186 m2/g) compare to that of pure TiO2 (64 m2/g). The XRD patterns of the Ti-Co samples resemble that of anatase and segregation of Co was not observed by this technique. The band gap energies of these solids vary from 3.05 to 2.85 eV which are smaller than that of pure TiO2 (3.2 eV). The Ti-Co oxides showed an enhancement in the hydrogen production (∼3056 μmol/h) compare to that of TiO2 (190 μmol/h) when using UV light. Furthermore, the photocatalytic activity of titania (110 μmol/h) for this reaction was also smaller than those observed for the Ti-Co mixed oxides (∼4056 μmol/h) under visible light.

PENGGUNAAN TiO2 PARTIKEL NANO HASIL SINTESIS BERBASIS AIR MENGGUNAKAN METODA SOL-GEL PADA BAHAN KAPAS SEBAGAI APLIKASI UNTUK TEKSTIL ANTI UV

Arena Tekstil ◽  
2013 ◽  
Vol 28 (1) ◽  
Author(s):  
Maya Komalasari ◽  
Bambang Sunendar
Keyword(s):  
Fourier Transform ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Sol Gel ◽  
Crosslinking Agent ◽  
X Ray Diffraction ◽  
Nano Tio2 ◽  
X Ray ◽  
Infra Red ◽  
Scanning Electron

Partikel nano TiO2 berbasis air dengan pH basa telah berhasil disintesis dengan menggunakan metode sol-gel dan diimobilisasi pada kain kapas dengan menggunakan kitosan sebagai zat pengikat silang. Sintesis dilakukan  dengan prekursor TiCl4 pada konsentrasi 0,3 M, 0,5 M dan 1 M, dan menggunakan templat kanji dengan proses kalsinasi pada suhu 500˚C selama 2 jam. Partikel nano TiO2 diaplikasikan ke kain kapas dengan metoda pad-dry-cure dan menggunakan kitosan sebagai crosslinking agent. Berdasarkan hasil Scanning Electron Microscope (SEM),diketahui bahwa morfologi partikel TiO2 berbentuk spherical dengan ukuran nano (kurang dari 100 nm). Karakterisasi X-Ray Diffraction (XRD) menunjukkan adanya tiga tipe struktur kristal utama, yaitu (100), (101) dan (102) dengan fasa kristal yang terbentuk adalah anatase dan rutile. Pada karakterisasi menggunakan SEM terhadap serbuk dari TiO2 yang telah diaplikasikan ke permukaan kain kapas, terlihat adanya imobilisasi partikel nano TiO2 melalui ikatan hidrogen silang dengan kitosan pada kain kapas. Hasil analisa tersebut kemudian dikonfirmasi dengan FTIR (Fourier Transform Infra Red) yang hasilnya memperlihatkan puncak serapan pada bilangan gelombang 3495 cm-1, 2546 cm-1, dan 511 cm-1,  yang masing-masing diasumsikan sebagai adanya vibrasi gugus fungsi O-H, N-H dan Ti-O-Ti. Hasil SEM menunjukkan pula bahwa kristal nano yang terbentuk diantaranya adalah fasa rutile , yang berdasarkan literatur terbukti dapatberfungsi sebagai anti UV.

scholarly journals Enhanced Photocatalytic Activity of CuWO4 Doped TiO2 Photocatalyst Towards Carbamazepine Removal under UV Irradiation

Separations ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 25
Author(s):  
Chukwuka Bethel Anucha ◽  
Ilknur Altin ◽  
Emin Bacaksız ◽  
Tayfur Kucukomeroglu ◽  
Masho Hilawie Belay ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
Pure Tio2 ◽  
Component Part ◽  
Energy Yield ◽  
Mechanical Agitation ◽  
X Ray

Abatement of contaminants of emerging concerns (CECs) in water sources has been widely studied employing TiO2 based heterogeneous photocatalysis. However, low quantum energy yield among other limitations of titania has led to its modification with other semiconductor materials for improved photocatalytic activity. In this work, a 0.05 wt.% CuWO4 over TiO2 was prepared as a powder composite. Each component part synthesized via the sol-gel method for TiO2, and CuWO4 by co-precipitation assisted hydrothermal method from precursor salts, underwent gentle mechanical agitation. Homogenization of the nanopowder precursors was performed by zirconia ball milling for 2 h. The final material was obtained after annealing at 500 °C for 3.5 h. Structural and morphological characterization of the synthesized material has been achieved employing X-ray diffraction (XRD), Fourier transform infra-red (FTIR) spectroscopy, Brunauer–Emmett–Teller (BET) N2 adsorption–desorption analysis, Scanning electron microscopy-coupled Energy dispersive X-ray spectroscopy (SEM-EDS), Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and UV-Vis diffuse reflectance spectroscopy (UV-vis DRS) for optical characterization. The 0.05 wt.% CuWO4-TiO2 catalyst was investigated for its photocatalytic activity over carbamazepine (CBZ), achieving a degradation of almost 100% after 2 h irradiation. A comparison with pure TiO2 prepared under those same conditions was made. The effect of pH, chemical scavengers, H2O2 as well as contaminant ion effects (anions, cations), and humic acid (HA) was investigated, and their related influences on the photocatalyst efficiency towards CBZ degradation highlighted accordingly.

scholarly journals Synthesis, characterization and in vitro cytotoxicity study of Co and Ni ferrite nanoparticles prepared by sol-gel method

2021 ◽  
Vol 3 (7) ◽  
Author(s):  
Alexandre Pancotti ◽  
Dener Pereira Santos ◽  
Dielly Oliveira Morais ◽  
Mauro Vinícius de Barros Souza ◽  
Débora R. Lima ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Test Sample ◽  
In Vitro Cytotoxicity ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Transmission Electron ◽  
Crystallite Sizes

AbstractIn this study, we report the synthesis and characterization of NiFe2O4 and CoFe2O4 nanoparticles (NPs) which are widely used in the biomedical area. There is still limited knowledge how the properties of these materials are influenced by different chemical routes. In this work, we investigated the effect of heat treatment over cytotoxicity of cobalt and niquel ferrites NPs synthesized by sol-gel method. Then the samples were studied using transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), Fourier Transform Infrared Spectroscopy Analysis (FTIR), and X-ray fluorescence (XRF). The average crystallite sizes of the particles were found to be in the range of 20–35 nm. The hemocompatibility (erythrocytes and leukocytes) was checked. Cytotoxicity results were similar to those of the control test sample, therefore suggesting hemocompatibility of the tested materials.

scholarly journals Efficient Removal of Levofloxacin by Activated Persulfate with Magnetic CuFe2O4/MMT-k10 Nanocomposite: Characterization, Response Surface Methodology, and Degradation Mechanism

Water ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 3583
Author(s):  
Junying Yang ◽  
Minye Huang ◽  
Shengsen Wang ◽  
Xiaoyun Mao ◽  
Yueming Hu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Photoelectron Spectroscopy ◽  
Degradation Mechanism ◽  
Sol Gel ◽  
Combustion Method ◽  
Copper Ferrite ◽  
X Ray ◽  
Rsm Model

In this study, a magnetic copper ferrite/montmorillonite-k10 nanocomposite (CuFe2O4/MMT-k10) was successfully fabricated by a simple sol-gel combustion method and was characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), the Brunner–Emmett–Teller (BET) method, vibrating sample magnetometer (VSM), and X-ray photoelectron spectroscopy (XPS). For levofloxacin (LVF) degradation, CuFe2O4/MMT-k10 was utilized to activate persulfate (PS). Due to the relative high adsorption capacity of CuFe2O4/MMT-k10, the adsorption feature was considered an enhancement of LVF degradation. In addition, the response surface methodology (RSM) model was established with the parameters of pH, temperature, PS dosage, and CuFe2O4/MMT-k10 dosage as the independent variables to obtain the optimal response for LVF degradation. In cycle experiments, we identified the good stability and reusability of CuFe2O4/MMT-k10. We proposed a potential mechanism of CuFe2O4/MMT-k10 activating PS through free radical quenching tests and XPS analysis. These results reveal that CuFe2O4/MMT-k10 nanocomposite could activate the persulfate, which is an efficient technique for LVF degradation in water.

Preparation of Carbon Nanofibers from Polyacrylonitrile Nanofibers by Electrospinning

2011 ◽  
Vol 415-417 ◽  
pp. 642-647
Author(s):  
En Zhong Li ◽  
Da Xiang Yang ◽  
Wei Ling Guo ◽  
Hai Dou Wang ◽  
Bin Shi Xu
Keyword(s):  
Electron Microscope ◽  
Carbon Nanofibers ◽  
Photoelectron Spectroscopy ◽  
Solution Concentration ◽  
Dimethyl Formamide ◽  
Ultrafine Fibers ◽  
X Ray ◽  
Scanning Electron ◽  
Pan Fibers

Ultrafine fibers were electrospun from polyacrylonitrile (PAN)/N,N-dimethyl formamide (DMF) solution as a precursor of carbon nanofibers. The effects of solution concentration, applied voltage and flow rate on preparation and morphologies of electrospun PAN fibers were investigated. Morphologies of the green fibers, stabilized fibers and carbonized fibers were compared by scanning electron microscope (SEM). The diameter of PAN nanofibers is about 450nm and the distribution of diameter is well-proportioned. Characterization of the elements changes of fibers were performed by X-ray photoelectron spectroscopy (XPS).

Magnetic Properties of Bulk Zn0.95-XMnXFe0.05O2 Prepared by Sol-Gel Method and Subsequent Hot Pressing

2011 ◽  
Vol 268-270 ◽  
pp. 356-359 ◽  
Author(s):  
Wen Song Lin ◽  
C. H. Wen ◽  
Liang He
Keyword(s):  
Magnetic Properties ◽  
Photoelectron Spectroscopy ◽  
Raw Materials ◽  
Sol Gel ◽  
Secondary Phase ◽  
X Ray Diffraction ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Doped Zno

Mn, Fe doped ZnO powders (Zn0.95-xMnxFe0.05O2, x≤0.05) were synthesized by an ameliorated sol-gel method, using Zn(CH3COO)2, Mn(CH3COO)2and FeCl2as the raw materials, with the addition of vitamin C as a kind of chemical reducer. The resulting powder was subsequently compacted under pressure of 10 MPa at the temperature of 873K in vacuum. The crystal structure and magnetic properties of Zn0.95-xMnxFe0.05O2powder and bulk samples have been investigated by X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). X-ray photoelectron spectroscopy (XPS) was used to study chemical valence of manganese, iron and zinc in the samples. The x-ray diffraction (XRD) results showed that Zn0.95-xMnxFe0.05O (x≤0.05) samples were single phase with the ZnO-like wurtzite structure. No secondary phase was found in the XRD spectrum. X-ray photoelectron spectroscopy (XPS) showed that Fe and Mn existed in Zn0.95-xMnxFe0.05O2samples in Fe2+and Mn2+states. The results of VSM experiment proved the room temperature ferromagnetic properties (RTFP) of Mn, Fe co-doped ZnO samples.

Sign in / Sign up

Export Citation Format

Share Document