Identification of process variables affecting the quality of fine pitch high performance ASIC substrates

2005 ◽  
Author(s):  
E. Bay ◽  
A. Bhatt ◽  
R. Keesler ◽  
J. Konrad ◽  
R. Sebesta
Keyword(s):  
High Performance ◽  
Process Variables ◽  
Fine Pitch

Avoidance of Bonding Pad Contamination Affecting Back-End Assembly Process

2008 ◽  
Author(s):  
Mu-Chun Wang ◽  
Kuo-Shu Huang ◽  
Zhen-Ying Hsieh ◽  
Shuang-Yuan Chen ◽  
Heng-Sheng Huang
Keyword(s):  
High Performance ◽  
Gold Wire ◽  
Assembly Process ◽  
Bond Performance ◽  
Root Cause ◽  
Wire Bond ◽  
Fine Pitch ◽  
Promising Solution ◽  
Adhesion Process

While the process fabrication and the electronic applications develop quickly, the die size and the package type also confront the improvement from the customers’ request to achieve the better signal performance in IC products. In cost consideration and marketing competition, most of commercial IC products still adopt the wire-bond technology, except some high performance products with solder/gold balls adhesion process. For consumer ICs, the gold wire is the major material to connect the IC chip and the lead frame through the bondability technology. In the recent era, the bond pad size and pitch is always shrinking. Therefore, the bond performance strongly depends on wire bond machine to provide lighters, thinner, and more reliable IC. After pad size shrinkage, the quality of pad is more impressed for wire bond reliability, especially in fine-pitch assembly process. It’s a challenge in reliability requirement. In this study, the root cause and promising solution of bond pad contamination were investigated. One is to improve the bonding yield in wire-bond process; the other is to promote the bonding reliability after the whole assembly process.

scholarly journals The Effect of an Ag Nanofilm on Low-Temperature Cu/Ag-Ag/Cu Chip Bonding in Air

2021 ◽  
Vol 11 (20) ◽  
pp. 9444
Author(s):  
Yoonho Kim ◽  
Seungmin Park ◽  
Sarah Eunkyung Kim
Keyword(s):  
Low Temperature ◽  
High Performance ◽  
Bonding Process ◽  
Bonding Interface ◽  
Fine Pitch ◽  
Bonding Technology ◽  
Cu Bonding ◽  
Cu Oxidation ◽  
Pure Cu

Low-temperature Cu-Cu bonding technology plays a key role in high-density and high-performance 3D interconnects. Despite the advantages of good electrical and thermal conductivity and the potential for fine pitch patterns, Cu bonding is vulnerable to oxidation and the high temperature of the bonding process. In this study, chip-level Cu bonding using an Ag nanofilm at 150 °C and 180 °C was studied in air, and the effect of the Ag nanofilm was investigated. A 15-nm Ag nanofilm prevented Cu oxidation prior to the Cu bonding process in air. In the bonding process, Cu diffused rapidly to the bonding interface and pure Cu-Cu bonding occurred. However, some Ag was observed at the bonding interface due to the short bonding time of 30 min in the absence of annealing. The shear strength of the Cu/Ag-Ag/Cu bonding interface was measured to be about 23.27 MPa, with some Ag remaining at the interface. This study demonstrated the good bonding quality of Cu bonding using an Ag nanofilm at 150 °C.

THE EFFECT OF PROCESSING METHODS ON THE NUTRITIONAL QUALITY OF AFRICAN BREADFRUITS (TRECULIA AFRICANA) SEEDS

2020 ◽  
Vol 16 (2) ◽  
pp. 60
Author(s):  
Nwozo Sarah Onyenibe ◽  
Julius Oluwaseun Oluwafunmilola ◽  
Stanley Udogadi Nwawuba
Keyword(s):  
Amino Acid ◽  
Amino Acid Composition ◽  
Acid Composition ◽  
Nutritional Quality ◽  
High Performance ◽  
Phytochemical Analysis ◽  
Mineral Contents ◽  
Processing Methods ◽  
African Breadfruit

The extracted seeds of African breadfruit are identified to be extremely healthy whenever it is correctly processed. Therefore, the aim of the present study was to evaluate the effects of processing methods on the nutritional quality of African breadfruit seed. A qualitative phytochemical analysis including: Alkaloid, Flavonoid, Saponin, Tannin, Anthraquinone, Terpenoids, Steroid, and Cardiac Glycosides for the different fraction of African breadfruit seed was performed using a standard method. The result revealed the presence and greater amount of phytochemical for the raw fraction; seven in eight, six in eight for steamed fraction, and four in eight for boiled and roasted respectively. Anti-nutrient, Proximate, and Mineral Content were also conducted using standard methods. The amino acid composition was determined using High-Performance Liquid Chromatography (HPLC). The results of the present study revealed that anti-nutrients including Phytate, Tannins, and Oxalate were significantly p<0.05 reduced in the boiled fraction 5.47±0.15, 3.42±0.02 and 6.89±0.05, and highest in the raw fraction 7.77±0.01, 5.09±0.03 and 9.34±0.14. The proximate composition including; percentage crude fat, Ash, Carbohydrate, Fatty acid, and Energy value were significantly lower p<0.05 in the boiled fraction relative to the other fractions. Mineral contents; calcium, magnesium, sodium, potassium, and phosphorus were also significantly p<0.05 elevated in the boiled fraction relative to the raw, steamed, and roasted fraction. The amino acid composition was highest in the roasted and boiled fraction 57.350 and 56.978, and lowest in the steamed and raw fraction 35.754 and 28.748 respectively. Therefore, boiling (cooking) is encouraged for the preparation of African breadfruit seed.

scholarly journals Development and application of a spectrophotometric method in quality evaluation of benzimidazole anthelminthics in Nairobi city county

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Johnson K. Murage ◽  
Beatrice K. Amugune ◽  
Peter Njogu ◽  
Stanley Ndwigah
Keyword(s):  
Spectrophotometric Method ◽  
High Performance ◽  
Neglected Tropical Diseases ◽  
Developing Economies ◽  
Raw Materials ◽  
Poor Quality ◽  
Prolonged Treatment ◽  
Good Precision ◽  
Market Surveillance

Abstract Background Neglected tropical diseases (NTDs) are a group of communicable diseases which are prevalent in the tropics affecting more than one billion people. Treatment and prevention of these infections is very costly to developing economies. Helminthiases are classified among NTDs. The communities afflicted are poor and have limited access to essential resources for their livelihood. Poor-quality drugs for NTDs may lead to death or prolonged treatment without achieving the desired results. The limited resources used in purchasing poor-quality drugs will therefore be wasted instead of being put to good use. Most of the methods available for the analysis of benzimidazole anthelminthics utilize high-performance liquid chromatography. They are therefore time consuming, require sophisticated and expensive equipment, utilize rare and expensive reagents and solvents, and call for skilled personnel. A simple, rapid, and inexpensive ultraviolet spectrophotometric method of analysis would therefore come in handy especially in the analysis of many samples as occurs during post-authorization market surveillance for quality. Results The suitable solvent for the spectroscopic analysis was established as 0.1 M methanolic HCl. The wavelength of analysis was set at 294 nm. Upon validation, the method was found to have good linearity. The range over which linearity was established was way beyond the 80 to 120% of the working concentration specified by the ICH. The method exhibited good precision. Out of 32 commercial samples analyzed, five (15.6%) did not comply with compendial specifications. Intra-brand batch variation was also observed. Out of three batches of product A002T analyzed, one did not comply with compendial specifications. Conclusion A major limitation in the analysis of benzimidazole anthelminthics is the lack of reliable, simple, rapid, and low-cost methods of analysis with high throughput. The developed method serves to fill this gap. It can be used in the analysis of raw materials and finished products. It can also be used in the establishment of the quality of products prior to registration. The method will prove very useful in post-market surveillance of quality of benzimidazole anthelminthics.

Robust Environmental Sensing Using UAVs

2021 ◽  
Vol 2 (4) ◽  
pp. 1-20
Author(s):  
Ahmed Boubrima ◽  
Edward W. Knightly
Keyword(s):  
Air Pollution ◽  
Gas Sensors ◽  
High Performance ◽  
Weather Conditions ◽  
Ambient Air ◽  
Mission Planning ◽  
Pollution Monitoring ◽  
Compound Pollution ◽  
Planning Algorithm

In this article, we first investigate the quality of aerial air pollution measurements and characterize the main error sources of drone-mounted gas sensors. To that end, we build ASTRO+, an aerial-ground pollution monitoring platform, and use it to collect a comprehensive dataset of both aerial and reference air pollution measurements. We show that the dynamic airflow caused by drones affects temperature and humidity levels of the ambient air, which then affect the measurement quality of gas sensors. Then, in the second part of this article, we leverage the effects of weather conditions on pollution measurements’ quality in order to design an unmanned aerial vehicle mission planning algorithm that adapts the trajectory of the drones while taking into account the quality of aerial measurements. We evaluate our mission planning approach based on a Volatile Organic Compound pollution dataset and show a high-performance improvement that is maintained even when pollution dynamics are high.

Pursuit of Operational Excellence

2016 ◽  
Vol 3 (2) ◽  
pp. 21-34
Author(s):  
Christine Welch ◽  
Tammi Sinha ◽  
Nigel Ward
Keyword(s):  
Change Management ◽  
Continuous Improvement ◽  
High Performance ◽  
Effective Leadership ◽  
Value Systems ◽  
Goods And Services ◽  
Team Working ◽  
Performance Teams ◽  
Operational Excellence

Operational Excellence (OE) is achieved when high performance teams are seeking for continuous improvement in well-designed processes, using appropriate tools and technologies. Excellence is underpinned by a philosophy in which problem-solving, team-working and effective leadership combine to focus upon customer needs, and all employees are empowered to act to maintain optimal flows of value. OE is clearly a desirable quality of organizations seeking both effectiveness and efficiency in their production of goods and services for customers. OE is underpinned by concepts such as team-working, effective leadership and change management, and depends upon effective flows of value. Systems Thinking (ST) is consequently at the heart of genuine excellence. This paper was conceived in the context of a Community of Practice of business improvement professionals, who took Operational Excellence as their agenda for inquiry during sessions in 2015. Reflection upon practice discussed at these meetings, together with the literature of change management and continuous improvement, have led to development of a systemic ‘landscape' model for pursuit of Operational Excellence. The elements of this model are set out, showing how they can contribute to OE.

A simple method for evaluating image quality of screen-film system using a high-performance digital camera

2009 ◽  
Author(s):  
Naotoshi Fujita ◽  
Asumi Yamazaki ◽  
Katsuhiro Ichikawa ◽  
Yoshie Kodera
Keyword(s):  
Image Quality ◽  
High Performance ◽  
Digital Camera ◽  
Film System ◽  
Simple Method

scholarly journals Review: Sensors for Biosignal/Health Monitoring in Electronic Skin

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2478
Author(s):  
Hyeon Seok Oh ◽  
Chung Hyeon Lee ◽  
Na Kyoung Kim ◽  
Taechang An ◽  
Geon Hwee Kim
Keyword(s):  
High Performance ◽  
Active Component ◽  
Tactile Sensor ◽  
Wearable Devices ◽  
Advanced Technology ◽  
Electronic Skin ◽  
Points Of View ◽  
External Stimuli ◽  
Flexible Component

Skin is the largest sensory organ and receives information from external stimuli. Human body signals have been monitored using wearable devices, which are gradually being replaced by electronic skin (E-skin). We assessed the basic technologies from two points of view: sensing mechanism and material. Firstly, E-skins were fabricated using a tactile sensor. Secondly, E-skin sensors were composed of an active component performing actual functions and a flexible component that served as a substrate. Based on the above fabrication processes, the technologies that need more development were introduced. All of these techniques, which achieve high performance in different ways, are covered briefly in this paper. We expect that patients’ quality of life can be improved by the application of E-skin devices, which represent an applied advanced technology for real-time bio- and health signal monitoring. The advanced E-skins are convenient and suitable to be applied in the fields of medicine, military and environmental monitoring.

The Cooling Rate Effect on Graphene Synthesis Using Low Pressure Chemical Vapor Deposition

2021 ◽  
Author(s):  
Byoungdo Lee ◽  
Weishen Chu ◽  
Wei Li
Keyword(s):  
Chemical Vapor Deposition ◽  
Reaction Time ◽  
Carbon Source ◽  
Cooling Rate ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Feeding Time ◽  
Process Variables ◽  
Pressure Chemical

Abstract Low-pressure chemical vapor deposition (LPCVD) is the most efficient method to synthesize large-scale, high-quality graphene for many potential applications such as flexible electronics, solar cells, and separation membranes. The quality of LPCVD is affected by process variables including methane/hydrogen (CH4/H2) ratio, time, pressure, temperature, and cooling rate. The cooling rate has been recognized as one of the most important process variables affecting the amount of carbon source, nucleation, reaction time, and thus the quality of the LPCVD. In this research, we investigate the effect of cooling rate on the quality of graphene synthesize by changing the cooling rate and the gas feeding time. Graphene coverage is measured by Raman mapping. It is found that fast cooling rate leads to decreased carbon source reaction time, which in turn results in higher coverage by monolayer graphene. The temperature-dependent gas feeding time corresponding to different cooling rates can be used to properly supply the carbon source onto the copper surface, also leading to a higher graphene coverage.

Patulin Surveillance in Apple Cider and Juice Marketed in Michigan

2009 ◽  
Vol 72 (6) ◽  
pp. 1255-1261 ◽  
Author(s):  
KERRI L. HARRIS ◽  
GERD BOBE ◽  
LESLIE D. BOURQUIN
Keyword(s):  
High Performance ◽  
Apple Juice ◽  
Solid Phase ◽  
Uv Light ◽  
Grocery Store ◽  
Grocery Stores ◽  
Apple Cider ◽  
Shelf Stable ◽  
Retail Grocery

Patulin is the most common mycotoxin found in apples and apple juices. The objective of this study was to determine the concentrations of patulin in (i) apple cider produced and marketed by Michigan apple cider mills during the fall seasons of 2002 to 2003 and 2003 to 2004 and (ii) apple juice and cider, including shelf-stable products, marketed in retail grocery stores in Michigan throughout 2005 and 2006. End product samples (n = 493) obtained from 104 Michigan apple cider mills were analyzed for patulin concentration by using solid-phase extraction followed by high-performance liquid chromatography. Patulin was detected (≥4 μg/liter) in 18.7% of all cider mill samples, with 11 samples (2.2%) having patulin concentrations of ≥50 μg/liter. A greater percentage of cider samples obtained from mills using thermal pasteurization contained detectable patulin (28.4%) than did those from mills using UV light radiation (13.5%) or no pathogen reduction treatment (17.0%). Among retail grocery store samples (n = 159), 23% of apple juice and cider samples contained detectable patulin, with 18 samples (11.3%) having patulin concentrations of ≥50 μg/liter. The U.S. Food and Drug Administration (FDA) action level for patulin is 50 μg/kg. Some apple juice samples obtained from retail grocery stores had exceptionally high patulin concentrations, ranging up to 2,700 μg/liter. Collectively, these results indicate that most apple cider and juice test samples from Michigan were below the FDA action level for patulin but that certain apple cider and juice processors have inadequate controls over patulin concentrations in final products. The industry, overall, should focus on improved quality of fruit used in juice production and improve culling procedures to reduce patulin concentrations.

Sign in / Sign up

Export Citation Format

Share Document