PHYSICAL AND CHEMICAL CHARACTERISTIC OF YOUNG COCONUT LEAVES (Cocos nucifera L.) AS TRADITIONAL PACKAGING

Traditional food is usually packed with natural packaging materials such as young coconut leaves (janur), but a little scientific information is available related to the packaging material. This study aimed to examine the physical and chemical characteristics of fresh and steamed janur (30 minutes steaming at 100 0 C). The physical and chemical properties of janur were expected to be the basis for the development of janur as an environmentally friendly packaging material. The results showed that fresh and steamed janur color was greenish-yellow and brownish-yellow. The fresh and steamed janur had a tensile strength 19.19 MPa and 30.62 MPa; water content 73.54% and 69.57%; and fat content 1.85% and 0.54%, respectively. After steaming, the microstructure of the cells became finer and irregular. The dominant fatty acid in fresh janur and steamed janur was palmitic acid (24.27%), and palmitoleic acid (38.56%), respectively. The treatment of steaming of janur influenced the physical and chemical characteristics of packaging materials.

Physical and Chemical Characteristics of Teak (Tectona Grandis) Leaves as Food Packaging Material

Teak (Tectona grandis) leaves is commonly used as the packaging material of traditional food in Indonesia. This study aimed to determine the physical and chemical characteristics of teak leaves with various maturation stages to obtain information about the potency of teak leaves as active packaging material. The physical characteristics analysis including leaf color, thickness, and tensile strength, while chemical characteristics were moisture, fat content, fatty acid, and volatile profile. The results showed that the color, thickness, tensile strength, moisture, and fat content, were light green, 0.306±0.024 mm, 0.22±0.114 MPa, 74.93%, and 2.52% respectively for young teak leaves; while the mature has darker green, 0.388±0.001 mm, 0.36±0.163 MPa, 73.05%, and 2.54% respectively. The fatty acid profiles showed that young teak leaves contained 5 types of fatty acids, dominated by lignoceric acid; while mature teak leaves contained 9 types of fatty acids dominated by tricosanoic acid. The volatile components of young teak leaves e.g. acid and ester compounds, while the mature was dominated by acid and ether compounds. From the results, it is suggested that the use of teak leaves as active food packaging material can be scientifically justified.

Sensory Analysis, Caffeine, Chlorogenic Acid and Non-Volatile Taste Compounds of Arabica Coffee (Coffea arabica) Fermented with Sugar Addition for Brew Taste

Arabica coffee is the most popular variety of coffee among the people because it has a more complex flavor than other coffee varieties. This study aims to determine sensory properties and non-volatile components in Arabica coffee fermented with sugar addition. The sensory assessment showed that the best cupping score was the samples fermented with the addition of 0.55% fructose with a total score of 85.25 compared to honey (H) and Fullwash (FW) samples. Fermentation with the addition of 0.55% fructose could produce better coffee compared to samples (H) and (FW). Fermentation with the sugar addition of 0.55% could affect non-volatile components such as soluble sugars, organic acids, amino acids, caffeine, and chlorogenic acid. The content of chlorogenic acid and caffeine analysed by HPLC was found relatively stable in green and roasted beans. Amino acids analysed by LCMS showed glutamate was the highest amino acid in all samples and were supposed to have a role in Maillard reaction contributing to coffee flavor. In conclusion, fermentation with the addition of 0.55% sugar in coffee processing could generally enhance the coffee flavor for brew taste with its potential as functional drink.

RETROGRADATION PROPERTIES OF HEAT MOISTURE TREATED (HMT) SAGO AND ARENGA STARCHES

This study aimed to investigate the retrogradation rate of heat moisture treated sago and arenga starches using different approaches, including a thermal approach using DSC (differential scanning calorimetry), a rheological approach using dynamic viscoelasticity as rheological and syneresis level. The autoclaving procedures prepared the HMT starches at 20% moisture content and warmed to 120°C for 60 min and 90 min for sago and arenga starches, respectively. The Avrami equation was used to express starch retrogradation kinetics based on gelatinization enthalpy (ΔH). The Avrami exponent (n) of HMT and native starches were close to 1.0 (0.77 – 1.20) indicates rapid nuclei growth of the crystal. HMT has a significant influence on the retrogradation of sago starch, both from the values of n and k of the Avrami equation. On the other hand, it does not have a significant effect on arenga starch. Based on the thermal approach (DSC), HMT significantly affects sago starch’s retrogradation rate, but there was no effect on arenga starch. The influence of HMT on the retrogradation rate of arenga starch was observed on rheology and syneresis approaches, although it was not as high as sago starch.

Fatty Acid Composition, Antinutritional Factors, and Oligosaccharides Concentration of Hawaijar (An Ethnic Fermented Soyfood of India) As Affected by Genotype and Bacillus Subtilis Strain

Hawaijar is an ethnic fermented soy product from the North-East region of India. The information on the effect of soybean genotype and the Bacillus subtilis strain used for inoculation for preparing the product on the fatty acid composition, the level of antinutritional factors, such as Kunitz trypsin inhibitor (KTI) and Bowman-Birk inhibitor (BBI), and oligosaccharides is not available. In the present study, Hawaijar was prepared from two soybean genotypes using two different strains of Bacillus subtilis and investigated for the concentration of the above-mentioned biomolecules. The results showed the significant effect of genotype used on oleic, linoleic, and α-linolenic acid of the product. KTI and BBI were found absent in Hawaijar prepared from these two genotypes and two strains. Flatulence-inducing factors like raffinose and stachyose were found in very low concentration irrespective of genotype and strain. Retention of sweetness-imparting sucrose and maltose concentration in Hawaijar was genotype-dependent.

OLIGO-GLUCOMANNAN PRODUCTION FROM PORANG (Amorphophallus oncophyllus) GLUCOMANNAN BY ENZYMATIC HYDROLYSIS USING β-MANNANASE

Porang (Amorphophallus oncophyllus) is an indigenous tuber of Indonesia that rich in glucomannan. An alternative approach to produce porang oligo-glucomannan (POG) as prebiotic from porang glucomannan (PGM) was made by enzymatic hydrolysis using β-mannanase. This study aimed to produce POG under optimal conditions by controlled enzymatic hydrolysis process. The PGM flour contained 96.12% of indigestible carbohydrates. The optimum condition of enzymatic hydrolysis producing the highest reducing sugar was as follows: temperature 37°C, pH 5.5, a ratio of enzyme to the substrate (E/S) 1:1000, and reaction time 4 h. HPLC analysis confirmed that 99.45% of the resulting POG consisted of oligosaccharides with a degree of polymerization (DP) 3. Hence, the PGM utilized in this study has been proven as a potential substrate for POG production. Additionally, the resulting POG was considered as a functional ingredient due to has prebiotic potential.

BROWNIES FROM MANGROVE FRUIT FLOUR: THE USE OF VARIATION OF FLOURS AS AN ALTERNATIVE TO HIGH FOOD NUTRITION

Brownies is a popular high-calorie snack. In this studied, brownies were processed from several types of flour, namely pedada fruit (Sonneratia caseolaris) flour, api-api (Avicennia officinalis) flour, red bean flour, and modified cassava flour with nutritional value and health benefits compared to the commercial ones (from wheat flour). The purpose of this studied was to determine the used of a variety of superior flours as raw material for making brownies in terms of nutritional value and leveled of preference. The experimental design used a completely randomized design (CRD) with test parameters including the leveled of preference, caloric value, fiber, and proximate composition. The results of the studied were tested for variance using spss version 22 software with a 95% confidence interval. The results showed that the best results were brownies made from pedada fruit flour because they had higher fiber and lowered calories with test scores for calorie content, crude fiber, air content, fat content, protein content, ash content, carbohydrate content respectively. 401. 87 kcal each; 16.49%; 18.32%; 21.7%; 4.03%; 1.44%; and 54.64%.

ANTHOCYANIN FROM BAUHINIA PURPUREA FLOWER: EXTRACTION, COLOR CHARACTERISTICS AND STABILITY

The determination of the best temperature (45, 60, and 75°C ) and time (30, 75, and 120 minutes) to extract the anthocyanins from Bauhinia purpurea (BP) flower powder was studied. The anthocyanin was extracted using 40 ml of 1 N HCl/g powder with continuous shaking. Based on the total monomeric anthocyanin (TMA), the best extraction temperature and time were 45°C and 30 minutes, respectively. The BP extract exhibited relatively high red color intensity (CI) at pH ≤ 3 and almost colorless at pH 4 – 6. Meanwhile, at pH ≥ 7, the color was unsuitable for food applications due to the high browning index. Hence, the best performance of BP extract was at pH 3. At this pH, the stability of BP extract was relatively high with the t 1/2 of CI and TMA at 30°C was 70.30 and 72.89 days, respectively. Nevertheless, the extract was sensitive to heat as represented by the high activation energy (Ea). The Ea of CI and TMA was 64.50 kJ.mol-1 and 90.19 kJ.mol-1, respectively. The study showed the potential of BP extract as a red food colorant at pH 3 processed by relatively mild heat treatment.

HURDLE TECHNOLOGY: PRINCIPLES AND RECENT APPLICATIONS IN FOODS

The application of hurdle technology in food preservation is progressing. The technology is becoming more acceptable among researchers in the field of food preservation due to its effectiveness at mild levels. The effects of conventional preservation techniques are minimized by hurdle technology through a smart combination of preservatives at less severe levels. Considerable advancement in the application of hurdle technology is realized in both developed and developing nations. Nutritional and sensory qualities were protected through the smart use of combined preservation. The safety and stability of foods were ensured using this technology, and many perishable foods are now ambient stable. This article reviewed the principles of hurdle technology and reported the recent applications of the technology in the preservation of foods from plant and animal origins.

THE ROLE OF FOOD SCIENCE AND TECHNOLOGY FOR INDONESIAN INDIGENOUS FOOD PRODUCT DEVELOPMENT TO ACHIEVE FOOD SECURITY

Food insecurity is remaining an unsolved problem since the continuous increase in human populations demands an increased supply of food. The objective of this paper was to present Indonesian indigenous food product development as an answer to the food security problem. It could be conducted by presenting the potentials of indigenous foods, creating advances in food technology, and arranging strategies that needed to develop indigenous food products, particularly as a food technologist. The suggested strategies were: choosing the raw material that is abundantly available in the local area, assessing its superiorities, doing a feasibility study, enhancing the food product’s safety and quality by applying good manufacturing practices and using environmentally friendly packaging, and promoting the products through modern channels such as the supermarket. This would allow nutritious and safe indigenous food products to become competitive and widely impacting food products that can bring food security into a reality.