scholarly journals Impact of Pulse Length on the Accuracy of Defect Depth Measurements in Pulse Thermography

2019 ◽  
Vol 141 (4) ◽  
Author(s):  
James Pierce ◽  
Nathan B. Crane
Keyword(s):  
Surface Defects ◽  
Pulse Length ◽  
Input Pulse ◽  
Three Dimensional ◽  
Acrylonitrile Butadiene Styrene ◽  
Test Method ◽  
Defect Depth ◽  
Pulse Thermography ◽  
Energy Pulse ◽  
The Impact

Pulse thermography (PT) is a nondestructive testing method in which an energy pulse is applied to a surface while the surface temperature evolution is measured to detect sub surface defects and estimate their depth. This nondestructive test method was developed on the assumption of instantaneous surface heating, but recent work has shown that relatively long pulses can be used to accurately determine defect depth in polymers. This paper examines the impact of varying input pulse length on the accuracy of defect depth quantification as a function of the material properties. Simulations using both thermoplastics and metals show that measurement error is dependent on a nondimensionalized pulse length. The simulation results agree with experimental results for three-dimensional (3D) printed acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA) components. Analysis and experiments show that defects can be accurately detected with minor modification to the standard methods as long as the pulse ends before the characteristic defect signal is detected.

Evaluation and Characterization of Plastics-Made Sheet Type Components under Impact

2008 ◽  
Vol 33-37 ◽  
pp. 381-386
Author(s):  
M. Nizar Machmud ◽  
Masaki Omiya ◽  
Hirotsugu Inoue ◽  
Kikuo Kishimoto
Keyword(s):  
Impact Resistance ◽  
Acrylonitrile Butadiene Styrene ◽  
Test Method ◽  
Fe Model ◽  
The Core ◽  
Secondary Cracks ◽  
Engineering Plastics ◽  
Alternative Material ◽  
Plastic Components ◽  
The Impact

Experimental works using a drop weight impact test method have been performed on a circular sheet specimen to evaluate and to characterize the impact resistance of the sheet-type plastic components designed for automotive wheel covers. Evaluation has been conducted for a set of engineering plastics: polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS) and their blend (PC/ABS). The testing results showed that the PC/ABS blend specimens failed in brittle manner under higher impact speeds with very few of whitening zones. Secondary cracks captured perpendicular to fracture surface were also found in the mid-plane of the scattered PC/ABS blend specimens. Investigation is then focused on this blend and the testing results describe that impact resistance of the specimen made of this alternative material is determined by ABS not by PC. Combination of structures between PC and ABS through the thickness in the core due to their immiscibility was observed by scanning electron microscope (SEM) on the etched PC/ABS specimen. This latter result well correlates the results obtained from the testing. It therefore reveals that immiscibility between PC and ABS in the blend plays an important role in determining the impact resistance of the components. This paper also presents simulative results of the test obtained from a FEA work by introducing a 3D- layered finite element (FE) model of the PC/ABS specimen to take into account effect of a layer in the core on the behavior of the blend.

Evaluation of railway trackbed moduli using the rail falling weight test method and its backcalculation model

2018 ◽  
Vol 233 (4) ◽  
pp. 431-447
Author(s):  
Parisa Haji Abdulrazagh ◽  
Orang Farzaneh ◽  
Cambyse Behnia
Keyword(s):  
Three Dimensional ◽  
Test Method ◽  
Geophysical Investigation ◽  
Site Investigations ◽  
Element Simulation ◽  
Weight Test ◽  
Falling Weight ◽  
The Impact

A new falling weight test method based on the direct impact on the rail was studied and a backcalculation model was developed to estimate the moduli of the railway substructure layers. The model is three-dimensional, dynamic, and considers the superstructures. After the preliminary studies on the impact system and measurement setup on a test track, a case study was performed on a railway station track. The data were recorded using a series of linear variable differential transformers, geophones, and accelerometers during the proposed falling weight test on the rail. To establish the soil profile and better understanding of the site, geotechnical and geophysical investigation of the soil was done using in situ and conventional laboratory tests. The studies show that the rail falling weight test is feasible and leads to reasonable results. Verification of the backcalculation model with the ABAQUS finite element simulation and comparison of the backcalculated moduli with the results of site investigations show that the function of the backcalculation model is satisfactory.

Analyzing the Impact of X-Ray Tomography on the Reliability of Integrated Circuits

2015 ◽  
Author(s):  
Halit Dogan ◽  
Md Mahbub Alam ◽  
Navid Asadizanjani ◽  
Sina Shahbazmohamadi ◽  
Domenic Forte ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
3D Imaging ◽  
Three Dimensional ◽  
Serial Sectioning ◽  
Promising Technique ◽  
Flash Memories ◽  
X Ray ◽  
3D Information ◽  
The Impact

Abstract X-ray tomography is a promising technique that can provide micron level, internal structure, and three dimensional (3D) information of an integrated circuit (IC) component without the need for serial sectioning or decapsulation. This is especially useful for counterfeit IC detection as demonstrated by recent work. Although the components remain physically intact during tomography, the effect of radiation on the electrical functionality is not yet fully investigated. In this paper we analyze the impact of X-ray tomography on the reliability of ICs with different fabrication technologies. We perform a 3D imaging using an advanced X-ray machine on Intel flash memories, Macronix flash memories, Xilinx Spartan 3 and Spartan 6 FPGAs. Electrical functionalities are then tested in a systematic procedure after each round of tomography to estimate the impact of X-ray on Flash erase time, read margin, and program operation, and the frequencies of ring oscillators in the FPGAs. A major finding is that erase times for flash memories of older technology are significantly degraded when exposed to tomography, eventually resulting in failure. However, the flash and Xilinx FPGAs of newer technologies seem less sensitive to tomography, as only minor degradations are observed. Further, we did not identify permanent failures for any chips in the time needed to perform tomography for counterfeit detection (approximately 2 hours).

scholarly journals Numerical simulation of the impact of an integrated renovation project on the Maowei Sea hydrodynamic environment

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Cui Wang ◽  
Ling Cai ◽  
Yaojian Wu ◽  
Yurong Ouyang
Keyword(s):  
Water Exchange ◽  
Land Reclamation ◽  
Three Dimensional ◽  
Exchange Capacity ◽  
Reclamation Project ◽  
Hydrodynamic Environment ◽  
Sea Area ◽  
Water Quality Models ◽  
The Impact ◽  
Main Factor

AbstractIntegrated renovation projects are important for marine ecological environment protection. Three-dimensional hydrodynamics and water quality models are developed for the Maowei Sea to assess the hydrodynamic environment base on the MIKE3 software with high resolution meshes. The results showed that the flow velocity changed minimally after the project, decreasing by approximately 0.12 m/s in the east of the Maowei Sea area and increasing by approximately 0.01 m/s in the northeast of the Shajing Port. The decrease in tidal prism (~ 2.66 × 106 m3) was attributed to land reclamation, and accounted for just 0.86% of the pre-project level. The water exchange half-life increased by approximately 1 day, implying a slightly reduced water exchange capacity. Siltation occurred mainly in the reclamation and dredging areas, amounting to back-silting of approximately 2 cm/year. Reclamation project is the main factor causing the decrease of tidal volume and weakening the hydrodynamics in Maowei Sea. Adaptive management is necessary for such a comprehensive regulation project. According to the result, we suggest that reclamation works should strictly prohibit and dredging schemes should optimize in the subsequent regulation works.

scholarly journals Mechanical Behavior of Hydroxyapatite-Chitosan Composite: Effect of Processing Parameters

Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 213
Author(s):  
Hamid Ait Said ◽  
Hassan Noukrati ◽  
Hicham Ben Youcef ◽  
Ayoub Bayoussef ◽  
Hassane Oudadesse ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Compressive Strength ◽  
Mechanical Strength ◽  
Bone Repair ◽  
Mechanical Stability ◽  
Three Dimensional ◽  
Processing Parameters ◽  
Composite Effect ◽  
Solid Liquid ◽  
The Impact

Three-dimensional hydroxyapatite-chitosan (HA-CS) composites were formulated via solid-liquid technic and freeze-drying. The prepared composites had an apatitic nature, which was demonstrated by X-ray diffraction and Infrared spectroscopy analyses. The impact of the solid/liquid (S/L) ratio and the content and the molecular weight of the polymer on the composite mechanical strength was investigated. An increase in the S/L ratio from 0.5 to 1 resulted in an increase in the compressive strength for HA-CSL (CS low molecular weight: CSL) from 0.08 ± 0.02 to 1.95 ± 0.39 MPa and from 0.3 ± 0.06 to 2.40 ± 0.51 MPa for the HA-CSM (CS medium molecular weight: CSM). Moreover, the increase in the amount (1 to 5 wt%) and the molecular weight of the polymer increased the mechanical strength of the composite. The highest compressive strength value (up to 2.40 ± 0.51 MPa) was obtained for HA-CSM (5 wt% of CS) formulated at an S/L of 1. The dissolution tests of the HA-CS composites confirmed their cohesion and mechanical stability in an aqueous solution. Both polymer and apatite are assumed to work together, giving the synergism needed to make effective cylindrical composites, and could serve as a promising candidate for bone repair in the orthopedic field.

scholarly journals Topological correlators and surface defects from equivariant cohomology

2020 ◽  
Vol 2020 (9) ◽  
Author(s):  
Rodolfo Panerai ◽  
Antonio Pittelli ◽  
Konstantina Polydorou
Keyword(s):  
Quantum Mechanics ◽  
Equivariant Cohomology ◽  
Surface Defects ◽  
Star Product ◽  
Three Dimensional ◽  
Three Dimensions ◽  
Dimensional System ◽  
The Novel ◽  
One Dimensional ◽  
Dual Quantum

Abstract We find a one-dimensional protected subsector of $$ \mathcal{N} $$ N = 4 matter theories on a general class of three-dimensional manifolds. By means of equivariant localization we identify a dual quantum mechanics computing BPS correlators of the original model in three dimensions. Specifically, applying the Atiyah-Bott-Berline-Vergne formula to the original action demonstrates that this localizes on a one-dimensional action with support on the fixed-point submanifold of suitable isometries. We first show that our approach reproduces previous results obtained on S3. Then, we apply it to the novel case of S2× S1 and show that the theory localizes on two noninteracting quantum mechanics with disjoint support. We prove that the BPS operators of such models are naturally associated with a noncom- mutative star product, while their correlation functions are essentially topological. Finally, we couple the three-dimensional theory to general $$ \mathcal{N} $$ N = (2, 2) surface defects and extend the localization computation to capture the full partition function and BPS correlators of the mixed-dimensional system.

scholarly journals Do Microplastics Enter Our Food Chain Via Root Vegetables? A Raman Based Spectroscopic Study on Raphanus sativus

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2329
Author(s):  
Leda-Eleni Tympa ◽  
Klytaimnistra Katsara ◽  
Panagiotis N. Moschou ◽  
George Kenanakis ◽  
Vassilis M. Papadakis
Keyword(s):  
Raphanus Sativus ◽  
Acrylonitrile Butadiene Styrene ◽  
Terrestrial Ecosystems ◽  
Label Free ◽  
Plastic Pollution ◽  
Potential Threat ◽  
Safety Studies ◽  
Widespread Phenomenon ◽  
Agriculture And Food ◽  
The Impact

The outburst of plastic pollution in terrestrial ecosystems poses a potential threat to agriculture and food safety. Studies have already provided evidence for the uptake of plastic microparticles by several plant species, accompanied by numerous developmental effects, using fluorescence labelling techniques. Here, we introduce the implementation of confocal Raman spectroscopy, a label-free method, for the effective detection of microplastics (MPs) accumulation in the roots of a common edible root vegetable plant, Raphanus sativus, after treatment with acrylonitrile butadiene styrene (ABS) powder. We also demonstrate the concomitant occurrence of phenotypic defects in the polymer-treated plants. We anticipate that this work can provide new insights not only into the extent of the impact this widespread phenomenon has on crop plants but also on the methodological requirements to address it.

scholarly journals Impact of inter-reader contouring variability on textural radiomics of colorectal liver metastases

2020 ◽  
Vol 4 (1) ◽  
Author(s):  
Francesco Rizzetto ◽  
Francesca Calderoni ◽  
Cristina De Mattia ◽  
Arianna Defeudis ◽  
Valentina Giannini ◽  
...  
Keyword(s):  
Liver Metastases ◽  
Hausdorff Distance ◽  
Intraclass Correlation ◽  
Three Dimensional ◽  
Liver Lesion ◽  
Dice Coefficient ◽  
Rf Values ◽  
Enhanced Computed Tomography ◽  
Relative Change ◽  
The Impact

Abstract Background Radiomics is expected to improve the management of metastatic colorectal cancer (CRC). We aimed at evaluating the impact of liver lesion contouring as a source of variability on radiomic features (RFs). Methods After Ethics Committee approval, 70 liver metastases in 17 CRC patients were segmented on contrast-enhanced computed tomography scans by two residents and checked by experienced radiologists. RFs from grey level co-occurrence and run length matrices were extracted from three-dimensional (3D) regions of interest (ROIs) and the largest two-dimensional (2D) ROIs. Inter-reader variability was evaluated with Dice coefficient and Hausdorff distance, whilst its impact on RFs was assessed using mean relative change (MRC) and intraclass correlation coefficient (ICC). For the main lesion of each patient, one reader also segmented a circular ROI on the same image used for the 2D ROI. Results The best inter-reader contouring agreement was observed for 2D ROIs according to both Dice coefficient (median 0.85, interquartile range 0.78–0.89) and Hausdorff distance (0.21 mm, 0.14–0.31 mm). Comparing RF values, MRC ranged 0–752% for 2D and 0–1567% for 3D. For 24/32 RFs (75%), MRC was lower for 2D than for 3D. An ICC > 0.90 was observed for more RFs for 2D (53%) than for 3D (34%). Only 2/32 RFs (6%) showed a variability between 2D and circular ROIs higher than inter-reader variability. Conclusions A 2D contouring approach may help mitigate overall inter-reader variability, albeit stable RFs can be extracted from both 3D and 2D segmentations of CRC liver metastases.

scholarly journals 3DIV update for 2021: a comprehensive resource of 3D genome and 3D cancer genome

2020 ◽  
Vol 49 (D1) ◽  
pp. D38-D46
Author(s):  
Kyukwang Kim ◽  
Insu Jang ◽  
Mooyoung Kim ◽  
Jinhyuk Choi ◽  
Min-Seo Kim ◽  
...  
Keyword(s):  
Cell Line ◽  
Large Scale ◽  
Three Dimensional ◽  
Cancer Cell Line ◽  
Cancer Genome ◽  
Structural Variations ◽  
3D Genome ◽  
Tightly Coupled ◽  
Regulatory Effects ◽  
The Impact

Abstract Three-dimensional (3D) genome organization is tightly coupled with gene regulation in various biological processes and diseases. In cancer, various types of large-scale genomic rearrangements can disrupt the 3D genome, leading to oncogenic gene expression. However, unraveling the pathogenicity of the 3D cancer genome remains a challenge since closer examinations have been greatly limited due to the lack of appropriate tools specialized for disorganized higher-order chromatin structure. Here, we updated a 3D-genome Interaction Viewer and database named 3DIV by uniformly processing ∼230 billion raw Hi-C reads to expand our contents to the 3D cancer genome. The updates of 3DIV are listed as follows: (i) the collection of 401 samples including 220 cancer cell line/tumor Hi-C data, 153 normal cell line/tissue Hi-C data, and 28 promoter capture Hi-C data, (ii) the live interactive manipulation of the 3D cancer genome to simulate the impact of structural variations and (iii) the reconstruction of Hi-C contact maps by user-defined chromosome order to investigate the 3D genome of the complex genomic rearrangement. In summary, the updated 3DIV will be the most comprehensive resource to explore the gene regulatory effects of both the normal and cancer 3D genome. ‘3DIV’ is freely available at http://3div.kr.

scholarly journals Evaluation of Energy Absorption Capabilities of Polyethylene Foam under Impact Deformation

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3613
Author(s):  
Baohui Yang ◽  
Yangjie Zuo ◽  
Zhengping Chang
Keyword(s):  
Energy Absorption ◽  
Failure Modes ◽  
High Strain ◽  
Early Stage ◽  
High Energy ◽  
Test Method ◽  
Test Theory ◽  
Strain Rates ◽  
Impact Properties ◽  
The Impact

Foams are widely used in protective applications requiring high energy absorption under impact, and evaluating impact properties of foams is vital. Therefore, a novel test method based on a shock tube was developed to investigate the impact properties of closed-cell polyethylene (PE) foams at strain rates over 6000 s−1, and the test theory is presented. Based on the test method, the failure progress and final failure modes of PE foams are discussed. Moreover, energy absorption capabilities of PE foams were assessed under both quasi-static and high strain rate loading conditions. The results showed that the foam exhibited a nonuniform deformation along the specimen length under high strain rates. The energy absorption rate of PE foam increased with the increasing of strain rates. The specimen energy absorption varied linearly in the early stage and then increased rapidly, corresponding to a uniform compression process. However, in the shock wave deformation process, the energy absorption capacity of the foam maintained a good stability and exhibited the best energy absorption state when the speed was higher than 26 m/s. This stable energy absorption state disappeared until the speed was lower than 1.3 m/s. The loading speed exhibited an obvious influence on energy density.

Sign in / Sign up

Export Citation Format

Share Document