Impact of Various Nanoparticles on the Viscous Properties of Water Based Drilling Fluids

2021 ◽  
Author(s):  
Muhammad Awais Ashfaq Alvi ◽  
Mesfin Belayneh ◽  
Arild Saasen ◽  
Sulalit Bandyopadhyay
Keyword(s):  
Drilling Fluid ◽  
Rheological Parameters ◽  
Drilling Fluids ◽  
Surface Charges ◽  
Cleaning Efficiency ◽  
Shear Rates ◽  
Nanosized Materials ◽  
Water Based ◽  
Multi Walled Carbon Nanotubes ◽  
Pump Pressure

Abstract Properly designed drilling fluid is a key element in achieving safe and effective drilling operations. Rheological parameters of drilling fluid determine the equivalent circulation density, the pump pressure, and hole cleaning efficiency. Also, they have a significant role in predicting the stability of drilling fluid under static and low shear rates. The chemical composition of the drilling fluid controls the rheological parameters. Recently, studies have shown that a small concentration of nanosized materials in the drilling fluid can substantially impact the rheological parameters of the drilling fluids. In this study, various nanoparticles (NPs) with different shapes, sizes, and surface charges were used to investigate their impact on the viscous properties of water-based drilling fluid. Bentonite and KCl water-based drilling fluids were used as the base fluids. NPs such as Iron oxide, Silica (SiO2), and multi-walled carbon nanotubes (MWCNT) were added to these base fluids. Also, surface functionalization of the NPs with polymer and functional groups such as -OH and -COOH groups was done to compare the effect of bare NPs with surface functionalized NPs. Hershel-Buckley model with dimensionless shear rates was used to calculate the low and high shear curvature exponents, surplus stress, and yield stress of the samples. Results indicate that NPs alter drilling fluid’s viscous properties based on their sizes, shapes, and surface charges. Moreover, the functionalization of NPs also modifies the properties based on the functional group attached to the NPs surface. This work shows that changing the size, shape, and surface charge of NPs has impact on viscous parameters, and NPs with different properties can fine-tune the fluid’s viscous properties based on the requirement for drilling fluid.

scholarly journals Research of Bare-Free Drilling Fluids

2021 ◽  
Vol 21 (3) ◽  
pp. 123-130
Author(s):  
Ekaterina L. Leusheva ◽  
Nazim T. Alikhanov
Keyword(s):  
Drilling Fluid ◽  
Inhibitory Effect ◽  
Rheological Parameters ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Drilling Process ◽  
Geological Conditions ◽  
Water Based ◽  
Environmental Requirements ◽  
The Stability

Mining and geological conditions for the development of new fields are becoming more difficult every year. Accordingly, the requirements for ensuring the environmental and technological safety of the drilling process are becoming more and more important. To ensure such a process, it is necessary to use correctly selected drilling fluids with proper characteristics: rheological parameters sufficient for effective cleaning of the well bottom, density sufficient to create back pressure, fluid loss to ensure a high-quality filter cake. Modern environmental requirements dictate the abandonment of hydrocarbon-based solutions. But when using water-based solutions, there are no suitable solutions, especially with their high density, since the use of barite can lead to a decrease in reservoir productivity. In this regard, the analysis of the problem and the search for options for creating water-based drilling fluids, weighted without the addition of barite, having the properties of maintaining the stability of the wellbore, ensuring safe drilling and opening productive formations without damaging the reservoir characteristics, was carried out. Such a solution was found in changing the base of the drilling fluid - highly mineralized fluids or solutions based on saturated brines. Brines must be created on the basis of inorganic salts that have good solubility, for example, chlorides, bromides. Due to the content of salts, the fluids have an inhibitory effect, and depending on the volume of dissolution, the density of the drilling fluids can be controlled. The scientific works of foreign and domestic scientists analyzed in the article have been published over the past five years, which indicates the relevance of this development. The selected compositions are presented and theoretically investigated, which were also tested in the field conditions.

scholarly journals Experimental investigation of the effect of TiO2 nanofluid and KCl salt on polymeric water-based drilling fluid properties

2019 ◽  
Vol 74 ◽  
pp. 9 ◽  
Author(s):  
AmirHossein Parizad ◽  
Ali Khorram Ghahfarokhi ◽  
Khalil Shahbazi ◽  
Amin Daryasafar ◽  
Tofigh Sayahi ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Base Fluid ◽  
Drilling Fluid ◽  
Rheological Parameters ◽  
Rheological Models ◽  
Shear Rates ◽  
Water Based ◽  
Fluid Properties ◽  
Different Temperatures ◽  
The Stability

In petroleum industries, nanofluids have the potential to improve the characteristics of the fluids used in drilling wells or Enhanced Oil Recovery (EOR) processes. In this study, a water based mud containing polymer was considered as the base fluid. Different concentrations of TiO2 nanoparticle (0, 0.5 and 0.75 wt%) and different concentrations of KCl salt (0, 0.5, 1.5, and 3 wt%) were added to the base fluid and exposed to different temperatures (30, 50, 70 and 90 °C) with 19 different shear rates for investigating the effects of nanoparticle concentration, salt concentration, temperature and shear rate on viscosity of the base mud. Presence of TiO2 particles enhanced not only the rheological behavior but also electrical and thermal conductivity of fluid up to 25% and 43%, respectively. Furthermore, the stability of the fluid containing salt and nanoparticle was investigated in these temperatures owing to the fact that the temperature could cause degradation of the fluid. For the purpose of investigating this phenomenon, the after cooling experiment was conducted. In addition, the data gathered in this investigation were examined by using three famous rheological models (Power law, Herschel-Bulkley and Herschel-Bulkley-Papanastasiou models) and the rheological parameters of each model were determined.

scholarly journals Numerical study of cutting transport using aerated drilling fluids

2021 ◽  
Vol 2119 (1) ◽  
pp. 012051
Author(s):  
V A Zhigarev ◽  
S O Zazulya ◽  
A V Minakov ◽  
A L Neverov
Keyword(s):  
Fluid Flow ◽  
Horizontal Well ◽  
Numerical Study ◽  
Drilling Fluid ◽  
Rheological Parameters ◽  
Drilling Fluids ◽  
Cuttings Transport ◽  
Foaming Agent ◽  
Water Based ◽  
Drill Pipes

Abstract The paper deals with drilling fluid flow in a horizontal well during its drilling. As part of this work, rheological parameters of water-based drilling fluid with the addition of polymers and a foaming agent were used. Cuttings transport was studied at different degrees of foam aeration. Besides, the paper presents the study of the effects of drilling fluid flow, as well as the rotation of drill pipes on the cuttings transport.

scholarly journals Effect of silica nano particles on the rheological and HTHP filtration properties of environment friendly additive in water-based drilling fluid

2021 ◽  
Author(s):  
Ved Prakash ◽  
Neetu Sharma ◽  
Munmun Bhattacharya
Keyword(s):  
Drilling Fluid ◽  
Cost Effective ◽  
Vital Role ◽  
Nano Particles ◽  
Rheological Parameters ◽  
Drilling Fluids ◽  
Filtration Loss ◽  
Water Based ◽  
Drilling Operations ◽  
Filtration Properties

AbstractRheological and filtration properties of drilling fluid contribute a vital role in successful drilling operations. Rheological parameters such as apparent viscosity (AV), plastic viscosity (PV), yield point (YP) and gel strength of drilling fluids are very essential for hydraulic calculations and lifting of drill cuttings during the drilling operation. Control of filtration loss volume is also very important for cost effective and successful drilling operations. Therefore, the main goal of this research is to improve the rheological and filtration properties of Grewia Optiva fibre powder (GOFP) by using 30–50 nm size of silica nano particles (SNP) in water-based drilling fluid. The experimental outcomes revealed that after hot rolling of mud samples at 100 °C for 16 h, the low pressure-low temperature (LPLT) and high pressure-high temperature (HPHT) filtration loss of GOFP additives was improved, after the addition of SNP on it. The mixture of 5% GOFP + 4% SNP has reduced the LPLT and HPHT filtration loss of drilling fluid by 74.03 and 78.12%, respectively, as compared to base mud. Thus, it was concluded that after the addition of 0.4% SNP, the LPLT and HPHT filtration control ability of GOFP additive in WBM were increased by 17.6 and 15%, respectively. The rheological parameters such as AV, PV, YP and gelation of drilling fluids were also improved by the addition of GOFP + SNP mixture in the base mud. Therefore, the implementation of GOFP + SNP mixture in water-based mud showed auspicious results which reaffirm the feasibility of using them in the successful drilling operations.

scholarly journals RDR Application: An Accurate HTHP Rheological Modeling for The Sulphonated Water-Based Drilling Fluid

2017 ◽  
Vol 10 (1) ◽  
pp. 251-262 ◽  
Author(s):  
Lin Xu ◽  
Han Gao ◽  
Ming-biao Xu ◽  
Fu-chang You ◽  
Xiao-liang Wang
Keyword(s):  
Shear Rate ◽  
Rheological Model ◽  
Predictive Accuracy ◽  
Drilling Fluid ◽  
Rate Coefficients ◽  
Drilling Fluids ◽  
Shear Rates ◽  
Water Based ◽  
Rheological Modeling ◽  
Modeling Strategy

Introduction: An accurate HTHP rheological model of drilling fluids is critical for the safe and economic drilling operation. However, general HTHP rheological modeling methods appear to be very limited in the predictive accuracy. Materials and Method: In this work, a particular relative dial readings(RDR) modeling experiment was conducted on a weighted sulphonated water-based drilling fluid within a certain temperature and pressure range(30-150°C, 0.1-100MPa), in combination to dial reading data of six specific shear rates 3, 6, 100, 200, 300, and 600rpm, to develop a highly accurate HTHP rheological model. The RDR modeling procedure was investigated in details, including relative dial reading, Arrhenius relation, polynomial of pressure coefficients, and polynomial of shear rate coefficients. An equation relating RDR to temperature, pressure, and shear rate was determined. Results: The predictive deviation was calculated to be lower than 11.7%, and large errors occurred under the conditions of high pressure and low shear rates; all of which meet the requirement of in-field predictive accuracy. These results not only provide an accurate HTHP rheological equation for the weighted sulphonated water-based drilling fluid, but also propose an effective HTHP rheological modeling strategy for drilling fluids.

scholarly journals Wet Drilled Cuttings Bed Rheology

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1644
Author(s):  
Camilo Pedrosa ◽  
Arild Saasen ◽  
Bjørnar Lund ◽  
Jan David Ytrehus
Keyword(s):  
Drilling Fluid ◽  
Drilling Fluids ◽  
Parallel Plates ◽  
Single Particles ◽  
Cuttings Transport ◽  
Transport Studies ◽  
Water Based ◽  
Fluid Properties ◽  
External Forces ◽  
Cuttings Bed

The cuttings transport efficiency of various drilling fluids has been studied in several approaches. This is an important aspect, since hole cleaning is often a bottleneck in well construction. The studies so far have targeted the drilling fluid cuttings’ transport capability through experiments, simulations or field data. Observed differences in the efficiency due to changes in the drilling fluid properties and compositions have been reported but not always fully understood. In this study, the cuttings bed, wetted with a single drilling fluid, was evaluated. The experiments were performed with parallel plates in an Anton Paar Physica 301 rheometer. The results showed systematic differences in the internal friction behaviors between tests of beds with oil-based and beds with water-based fluids. The observations indicated that cutting beds wetted with a polymeric water-based fluid released clusters of particles when external forces overcame the bonding forces and the beds started to break up. Similarly, it was observed that an oil-based fluid wetted bed allowed particles to break free as single particles. These findings may explain the observed differences in previous cutting transport studies.

Annular Frictional Pressure Losses During Drilling—Predicting the Effect of Drillstring Rotation

2014 ◽  
Vol 136 (3) ◽  
Author(s):  
Arild Saasen
Keyword(s):  
Rheological Properties ◽  
Pressure Loss ◽  
Drilling Fluid ◽  
Axial Flow ◽  
Drilling Fluids ◽  
Unstable Flow ◽  
Pressure Losses ◽  
Shear Dependent Viscosity ◽  
Water Based ◽  
Dependent Viscosity

Controlling the annular frictional pressure losses is important in order to drill safely with overpressure without fracturing the formation. To predict these pressure losses, however, is not straightforward. First of all, the pressure losses depend on the annulus eccentricity. Moving the drillstring to the wall generates a wider flow channel in part of the annulus which reduces the frictional pressure losses significantly. The drillstring motion itself also affects the pressure loss significantly. The drillstring rotation, even for fairly small rotation rates, creates unstable flow and sometimes turbulence in the annulus even without axial flow. Transversal motion of the drillstring creates vortices that destabilize the flow. Consequently, the annular frictional pressure loss is increased even though the drilling fluid becomes thinner because of added shear rate. Naturally, the rheological properties of the drilling fluid play an important role. These rheological properties include more properties than the viscosity as measured by API procedures. It is impossible to use the same frictional pressure loss model for water based and oil based drilling fluids even if their viscosity profile is equal because of the different ways these fluids build viscosity. Water based drilling fluids are normally constructed as a polymer solution while the oil based are combinations of emulsions and dispersions. Furthermore, within both water based and oil based drilling fluids there are functional differences. These differences may be sufficiently large to require different models for two water based drilling fluids built with different types of polymers. In addition to these phenomena washouts and tool joints will create localised pressure losses. These localised pressure losses will again be coupled with the rheological properties of the drilling fluids. In this paper, all the above mentioned phenomena and their consequences for annular pressure losses will be discussed in detail. North Sea field data is used as an example. It is not straightforward to build general annular pressure loss models. This argument is based on flow stability analysis and the consequences of using drilling fluids with different rheological properties. These different rheological properties include shear dependent viscosity, elongational viscosity and other viscoelastic properties.

Enhancement lubricity properties of water-based mud with nanoparticles

2020 ◽  
pp. 70-74
Author(s):  
V.V. Guliyev ◽  
◽  
◽  
Keyword(s):  
Yield Point ◽  
Coefficient Of Friction ◽  
Drilling Fluid ◽  
Research Work ◽  
Shear Thinning ◽  
Rheological Parameters ◽  
Drilling Process ◽  
Drilling Mud ◽  
Pseudoplastic Fluid ◽  
Water Based

Currently, a great number of drilling fluids with different additives are used all over the world. Such additives are applied to control the properties of the drilling mud. The main purpose for controlling is to achieve more effective and safe drilling process. This research work aims to develop Water-Based Mud (WBM) with a Coefficient of Friction (CoF) as low as Oil-Based Mud (OBM) and better rheological properties. As it is known, produced CoF by WBM is higher than OBM, which means high friction between wellbore or casing and drill string. It was the reason for studying the effect of nanosilica on drilling fluid properties such as lubricity, rheological parameters and filtrate loss volume of drilling mud. The procedures were carried out following API RP 13B and API 13I standards. Five concentrations of nanosilica were selected to be tested. According to the results obtained, it was defined that adding nanosilica into the mud decreases CoF of basic WBM by 26 % and justifies nanosilica as a good lubricating agent for drilling fluid. The decreasing trend in coefficient of friction and plastic viscosity for nanosilica was obtained until the concentration of 0.1 %. This reduction is due to the shear thinning or pseudoplastic fluid behavior. After 0.1 %, an increase at PV value trend indicates that it does not follow shear thinning behavior and after reaching a certain amount of dissolved solids in the mud, it acts like normal drilling fluid. The yield point of the mud containing nanoparticles was higher than the basic one. Moreover, a growth in the concentration leads to an increase in yield point value. The improvement of this fluid system cleaning capacity via hydraulics modification and wellhole stability by filter cake endurance increase by adding nanosilica is shown as well. The average well construction data of “Neft Dashlary” field was used for the simulation studies conducted for the investigation of hydraulics parameters of reviewed fluids for all series of experiments. The test results were accepted reliable in case of at least 3 times repeatability.

Hole-Cleaning Fibers Improve Cuttings-Carrying Capacity

2021 ◽  
Vol 73 (05) ◽  
pp. 63-64
Author(s):  
Chris Carpenter
Keyword(s):  
Flow Regime ◽  
Carrying Capacity ◽  
Rheological Model ◽  
Drilling Fluid ◽  
Test Method ◽  
Abu Dhabi ◽  
Rheological Parameters ◽  
Cleaning Efficiency ◽  
Hole Cleaning ◽  
Drilling Operations

This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 203147, “Investigating Hole-Cleaning Fibers’ Mechanism To Improve Cutting Carrying Capacity and Comparing Their Effectiveness With Common Polymeric Pills,” by Mohammad Saeed Karimi Rad, Mojtaba Kalhor Mohammadi, SPE, and Kourosh Tahmasbi Nowtarki, International Drilling Fluids, prepared for the 2020 Abu Dhabi International Petroleum Exhibition and Conference, Abu Dhabi, held virtually 9–12 November. The paper has not been peer reviewed. Hole cleaning in deviated wells is more challenging than in vertical wells because of the boycott effect or the eccentricity of the drillpipe. Poor hole cleaning can result in problems such as borehole packoff or excessive equivalent circulating density. The complete paper investigates a specialized fibrous material (Fiber 1) for hole-cleaning characteristics. The primary goal is to identify significant mechanisms of hole-cleaning fibers and their merits compared with polymeric high-viscosity pills. Hole-Cleaning Indices Based on a review of the literature, most effective parameters regarding hole cleaning in different well types were investigated. These parameters can be classified into the following five categories: - Well design (e.g., hole angle, drillpipe eccentricity, well trajectory) - Drilling-fluid properties (e.g., gel strength, mud weight) - Formation properties (e.g., lithology, cutting specific gravity, cuttings size and shape) - Hydraulic optimizations (e.g., flow regime, nozzle size, number of nozzles) - Drilling practices (e.g., drillpipe rotation speed, wellbore tortuosity, bit type, rate of penetration, pump rate) In this research, rheological parameters and parameters of the Herschel-Bulkley rheological model are considered to be optimization inputs to increase hole-cleaning efficiency of commonly used pills in drilling operations. The complete paper offers a detailed discussion of both the importance of flow regime and the role of the Herschel-Bulkley rheological model in reaching a better prognosis of drilling-fluid behavior at low shear rates. The properties of the fibrous hole-cleaning agent used in the complete paper are provided in Table 1. Test Method Two series of tests were performed. The medium of the first series is drilling water, with the goal of evaluating the efficiency of Fiber 1 in fresh pills. The second series of tests was per-formed with a simple polymeric mud as a medium common in drilling operations. Formulations and rheological properties of both test series are provided in Tables 4 and 5 of the complete paper, respectively.

ENVIRONMENTAL DRILLING SOLUTIONS ON THE POLYMERIC BASIS

2020 ◽  
Author(s):  
E.A. Flik ◽  
◽  
Y.E. Kolodyazhnaya
Keyword(s):  
Oil And Gas ◽  
Drilling Fluid ◽  
Oil And Gas Industry ◽  
Environmental Safety ◽  
Drilling Fluids ◽  
Gas Industry ◽  
Fluid Systems ◽  
Water Based

The article assesses the environmental safety of drilling fluids that are currently widely used in the oil and gas industry. It shows active development of water-based drilling fluid systems using xanthan biopolymer.

Sign in / Sign up

Export Citation Format

Share Document