Novel Method of Laser Direct Writing for Precise Patterning of Human Dermal Fibroblasts

Author(s):  
Nathan R. Schiele ◽  
Douglas B. Chrisey ◽  
David T. Corr

The ability to control a cell’s location, pattern geometry, and proximity to neighboring cells, in vitro, is highly desired to gain insight into cell-cell interactions, such as the modes of cellular signaling (direct cell contact, paracrine, or endocrine). A laser-based cell patterning technique, laser direct write, enables the precise spatial placement of living cells, with all the advantages of CAD/CAM control [1]. However, this technique is limited in usefulness due to the dependence on Matrigel® (BD Biosciences, Bedford, MA). The growth factor constituents of Matrigel® may interfere with many cellular processes under investigation and may preclude or greatly limit the utility of laser direct writing for precise cell cultures [2]. Therefore, to address this limitation, the objective of this study was to develop a Matrigel®-free laser direct writing method. Through the use of customized gelatin coatings on both the ribbon and receiving substrate, we effectively adapted the direct write technique to precisely pattern cells without the use of Matrigel®, as demonstrated with human dermal fibroblasts. The gelatin partially encapsulates the trypsinized cells on the ribbon, providing a volitization zone to protect the cells, and on the receiving substrate cushions the impact of transfer while maintaining moisture. Gelatin liquefies at 37°C, which allows it to be removed from the growth surface ensuring cellular proliferation, uninhibited by growth surface treatments. This represents a fundamental change from the original direct write technique in which cells must first form initial attachments to the ribbon via Matrigel® and then are written to a Matrigel® coated receiving substrate for their sustained growth. Additionally, we have developed a method to monitor the location of the patterned cells post-transfer to show that a gelatin coated-receiving substrate is effective as a patterning surface and ensures the registry of the pattern until cell attachment, even after the gelatin has been removed with the first growth medium application. This precise patterning technique can now be used in many biomedical applications, including those that involve cell types highly sensitive to growth factors, such as stem cells and cancer cells.

Viruses ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 1156
Author(s):  
Madelaine Sugasti-Salazar ◽  
Yessica Y. Llamas-González ◽  
Dalkiria Campos ◽  
José González-Santamaría

Mayaro virus (MAYV) hijacks the host’s cell machinery to effectively replicate. The mitogen-activated protein kinases (MAPKs) p38, JNK, and ERK1/2 have emerged as crucial cellular factors implicated in different stages of the viral cycle. However, whether MAYV uses these MAPKs to competently replicate has not yet been determined. The aim of this study was to evaluate the impact of MAPK inhibition on MAYV replication using primary human dermal fibroblasts (HDFs) and HeLa cells. Viral yields in supernatants from MAYV-infected cells treated or untreated with inhibitors SB203580, SP600125, U0126, or Losmapimod were quantified using plaque assay. Additionally, viral protein expression was analyzed using immunoblot and immunofluorescence. Knockdown of p38⍺/p38β isoforms was performed in HDFs using the PROTACs molecule NR-7h. Our data demonstrated that HDFs are highly susceptible to MAYV infection. SB203580, a p38 inhibitor, reduced MAYV replication in a dose-dependent manner in both HDFs and HeLa cells. Additionally, SB203580 significantly decreased viral E1 protein expression. Similarly, knockdown or inhibition of p38⍺/p38β isoforms with NR-7h or Losmapimod, respectively, affected MAYV replication in a dose-dependent manner. Collectively, these findings suggest that p38 could play an important role in MAYV replication and could serve as a therapeutic target to control MAYV infection.


2020 ◽  
Author(s):  
Zachary G. Davis ◽  
Aasim F. Hussain ◽  
Matthew B. Fisher

AbstractSeveral biofabrication methods are being investigated to produce scaffolds that can replicate the structure of the extracellular matrix. Direct-write, near-field electrospinning of polymer solutions and melts is one such method which combines fine fiber formation with computer-guided control. Research with such systems has focused primarily on synthetic polymers. To better understand the behavior of biopolymers used for direct-writing, this project investigated changes in fiber morphology, size, and variability caused by varying gelatin and acetic acid concentration, as well as, process parameters such as needle gauge and height, stage speed, and interfiber spacing. Increasing gelatin concentration at a constant acetic acid concentration improved fiber morphology from large, planar structures to small, linear fibers with a median of 2.3 µm. Further varying the acetic acid concentration at a constant gelatin concentration did not alter fiber morphology and diameter throughout the range tested. Varying needle gauge and height further improved the median fiber diameter to below 2 µm and variability of the first and third quartiles to within +/-1 µm of the median for the optimal solution combination of gelatin and acetic acid concentrations. Additional adjustment of stage speed did not impact the fiber morphology or diameter. Repeatable interfiber spacings down to 250 µm were shown to be capable with the system. In summary, this study illustrates the optimization of processing parameters for direct-writing of gelatin to produce fibers on the scale of collagen fibers. This system is thus capable of replicating the fibrous structure of musculoskeletal tissues with biologically relevant materials which will provide a durable platform for the analysis of single cell-fiber interactions to help better understand the impact scaffold materials and dimensions have on cell behavior.


Nanoscale ◽  
2021 ◽  
Author(s):  
Shuyu Liang ◽  
Yue-Feng Liu ◽  
Shenyuan Wang ◽  
Hong Xia ◽  
Hong-Bo Sun

Colloidal quantum dots (QDs) have exhibited great potentials for optoelectronic applications, including display, laser, anti-counterfeiting and information storage. However, high-resolution patterning technique of QDs is still a challenge, while precise...


2017 ◽  
Vol 28 (25) ◽  
pp. 3709-3723 ◽  
Author(s):  
Nicolas Aznar ◽  
Nina Sun ◽  
Ying Dunkel ◽  
Jason Ear ◽  
Matthew D. Buschman ◽  
...  

Cellular proliferation is antagonistically regulated by canonical and noncanonical Wnt signals; their dysbalance triggers cancers. We previously showed that a multimodular signal transducer, Daple, enhances PI3-K→Akt signals within the noncanonical Wnt signaling pathway and antagonistically inhibits canonical Wnt responses. Here we demonstrate that the PI3-K→Akt pathway serves as a positive feedback loop that further enhances noncanonical Wnt signals by compartmentalizing β-catenin. By phosphorylating the phosphoinositide- (PI) binding domain of Daple, Akt abolishes Daple’s ability to bind PI3-P-enriched endosomes that engage dynein motor complex for long-distance trafficking of β-catenin/E-cadherin complexes to pericentriolar recycling endosomes (PCREs). Phosphorylation compartmentalizes Daple/β-catenin/E-cadherin complexes to cell–cell contact sites, enhances noncanonical Wnt signals, and thereby suppresses colony growth. Dephosphorylation compartmentalizes β-catenin on PCREs, a specialized compartment for prolonged unopposed canonical Wnt signaling, and enhances colony growth. Cancer-associated Daple mutants that are insensitive to Akt mimic a constitutively dephosphorylated state. This work not only identifies Daple as a platform for cross-talk between Akt and the noncanonical Wnt pathway but also reveals the impact of such cross-talk on tumor cell phenotypes that are critical for cancer initiation and progression.


2013 ◽  
Vol 7 (3) ◽  
pp. 353-358 ◽  
Author(s):  
Cai Renye ◽  
◽  
Huang Jin ◽  

Cell direct-write, a promising technology for the creation of complex, three-dimensional tissue constructs, has great potential in tissue engineering, biological cytology, high-throughput drug screening and cell sensors. However, it has been found that cell damage due to the mechanical impact during cell direct-write is a possible hurdle for broad applications of fragile cell direct writing. The objective of this paper is to analyze the impact of the continuously jetted cell droplets on the hydro-gel coating substrate. In order to avoid the element distortion due to large-scale deformation, a mesh-free Smooth Particle Hydrodynamic method (SPH), is introduced to study the impact-induced cell mechanical loading profile during cell landing, including effective stress, plastic strain, velocity and acceleration, for better understanding and prediction of possible impact-induced cell damage. It is found that three important impact processes, cell-hydrogel, cellcell and cell-substrate impact, may occur during cell landing. It is concluded to decrease impact-induced cell damage, there are an appropriate firing period and jetting velocity.


2005 ◽  
Vol 14 (03) ◽  
pp. 399-407 ◽  
Author(s):  
KEUN BYOUNG YOON ◽  
BYEONG-SOO BAE ◽  
MICHAEL POPALL

The fabrication of single and multimode waveguides and optical characteristics were investigated. The singlemode waveguide was fabricated by a laser direct writing technique and a multimode waveguide was produced by means of a direct UV patterning technique using organic-inorganic hybrid materials. The fabrication of waveguide channels with these techniques are of interest for simple processes. The resulting single and multimode waveguides exhibited a near rectangular shape and low optical loss. The average propagation losses of these waveguides were 0.07 dB/cm (at 850 nm) and 0.3 dB/cm (at 1310 nm), respectively.


2018 ◽  
Vol 5 (2) ◽  
pp. 85-92
Author(s):  
Rika Azyenela ◽  
Indah Julianto ◽  
Yohanes Widodo Wirohadidjojo

Senescent human dermal fibroblasts had reduced capacity in proliferation and collagen synthesis. It is due to unresponsiveness against transforming growth factor-β1 (TGF-β1) stimulation. Either platelet-rich fibrin (PRF)-lysate or hyaluronic acid (HA) can restore TGF-β1 signaling pathway. To determine whether HA addition to PRF lysate has a better activity than PRF-lysate alone in restoring senescent human dermal fibroblasts (HDFs) activities. HDF isolated from six different human skins was divided into normal HDFs and senescent HDFs which are induced by serum starvation. The senescent groups were then given 50% PRF-lysate and various levels of HA. Amelioration of TGF-β1 signaling was measured by cellular proliferation index and collagen deposition.  Addition of HA into PRF-lysate resulted in a significant increase in proliferation index and collagen deposition index than PRF-lysate alone. The best level of HA for this mixture ranged from 20.83 mM to 41.67 mM. HA in PRF lysate is an excellent candidate material for treating clinical signs related to senescent human dermal fibroblasts.   Ethical permission: This experiment had gain approval from the local ethical committee, Ref: KE/FK/471/EC/2016 dated 17-05-2016.


2001 ◽  
Vol 698 ◽  
Author(s):  
Craig B. Arnold ◽  
Ryan C. Wartena ◽  
Bhanu Pratap ◽  
Karen E. Swider-Lyons ◽  
Alberto Piqué

ABSTRACTWe are using a laser engineering approach to develop and optimize hydrous ruthenium dioxide (RuOxHy or RuO2·0.5 H2O) pseudocapacitors. We employ a novel laser forward transfer process, Matrix Assisted Pulsed Laser Evaporation Direct Write (MAPLE-DW), in combination with UV laser machining, to fabricate mesoscale pseudocapacitors and microbatteries under ambient temperature and atmospheric conditions. Thin films with the desired high surface area morphology are obtained without compromising their electrochemical performance. The highest capacitance structures are achieved by depositing mixtures of sulfuric acid with the RuO2·0.5 H2O electrode material. Our pseudocapacitors exhibit linear discharge behavior and their properties scale proportionately when assembled in parallel and series configurations.


2000 ◽  
Vol 624 ◽  
Author(s):  
D. J. Ehrlich ◽  
Richard Aucoin ◽  
M. J. Burns ◽  
Kenneth Nill ◽  
Scott Silverman

ABSTRACTLaser microchemical direct write deposition and etching methods have found an essential niche in debug and design for yield of wire-bonded and flip-chip integrated circuits. Future applications should develop in package-level system modification.


2018 ◽  
Vol 5 (1) ◽  
pp. 45-50
Author(s):  
Yohanes Widodo Wirohadidjojo ◽  
Arief Budiyanto ◽  
Hardyanto Soebono

Background: Ultraviolet A radiation (UVA) can photo-age skin by suppressing the proliferation, migration, and collagen deposition of human dermal fibroblasts (HDFs). This process occurs because UVA light can inhibit the gene expression of the TGF-β receptor in HDFs. Moreover, Wharton’s Jelly Stem Cells-Conditioned Medium (WJSC-CM) is hypothesized to release microvesicles that contain short m-RNA with regenerative properties. Objectives: This study aimed to determine the regenerative properties of WJSC-CM on UVA-Irradiated Human Dermal Fibroblasts (UVA-HDFs) Methods: Passaged fourth of  HDFs obtained from the foreskin of six (11- to 13-year-old) boys were repeatedly irradiated with a total of 10 J/cm2 UVA and treated with various concentrations of WJSC-CM. We used non-irradiated HDFs as positive control. After that, the consumption of TGF-β, cellular proliferation, cellular migration, and collagen deposition of each group were measured and compared. Results: Compared to the non-irradiated groups, the proliferation rates, migration rates, and collagen deposition of UVA-HDFs significantly decreased (p<0.05). WJSC-CM can improve the consumption of TGF-β, proliferation, and cellular migration of UVA-HDFs. However, WJSC-CM failed to improve the collagen deposition of UVA-HDFs (p>0.05). Conclusions: WJSC-CM has regenerative properties and is a candidate material for the treatment of prematurely ageing skin induced by UVA-irradiation.   Ethical permission: This experiment was permitted by the local ethical permission committee Ref:KE/FK/382/EC with permission letter dated 17-04-2013.


Sign in / Sign up

Export Citation Format

Share Document