Novel Nanometric Reversible Low Power Bidirectional Universal Logarithmic Barrel Shifter with Overflow and Zero Flags

2015 ◽  
Vol 24 (04) ◽  
pp. 1550049 ◽  
Author(s):  
Nayereh Hosseininia ◽  
Soudabeh Boroumand ◽  
Majid Haghparast
Keyword(s):  
Low Power ◽  
High Speed ◽  
High Performance ◽  
Error Control ◽  
Digital Signal ◽  
General Purpose ◽  
Vlsi Circuits ◽  
Quantum Cost ◽  
Hardware Complexity ◽  
Barrel Shifter

One of the most important issues in designing VLSI circuits is power consumption. Reversible logic which is widely utilized in quantum computing, low power CMOS design, optical information processing, bioinformatics and nanotechnology-based systems decreases power loss. A reversible circuit has zero internal power dissipation because it does not lose information. Reversible barrel shifters are required to construct reversible embedded digital signal and general-purpose processors. Data shifting is often used in high-speed/low-power error-control applications, floating point normalization, address decoding and bit indexing. This paper proposes a novel reversible bidirectional universal barrel shifter which is applied in high speed and high performance applications. The proposed barrel shifter is designed in a single circuit with overflow and zero flags. It performs three operations consisting of rotating, logical and arithmetic shifting that transfers and shifts data in both directions. The design is evaluated and formulated in terms of number of garbage outputs, number of constant inputs, quantum cost, number of reversible gates and hardware complexity. All the scales are in nanometric area.

scholarly journals DESIGN OF AN EFFICIENT REVERSIBLE LOGIC BASED BIDIRECTIONAL BARREL SHIFTER

2013 ◽  
pp. 115-120
Author(s):  
O. ANJANEYULU ◽  
T. PRADEEP ◽  
C.V. KRISHNA REDDY
Keyword(s):  
High Speed ◽  
Optical Computing ◽  
Digital Signal ◽  
General Purpose ◽  
Reversible Logic ◽  
Quantum Cost ◽  
Fredkin Gate ◽  
Barrel Shifter ◽  
Proportional Increase ◽  
Signal Processors

Embedded digital signal processors and general purpose processors will use barrel shifters to manipulate data. This paper will present the design of the barrel shifter that performs logical shift right, arithmetic shift right, rotate right, logical shift left, arithmetic shift left, and rotate left operations. The main objective of the upcoming designs is to increase the performance without proportional increase in power consumption. In this regard reversible logic has become most popular technology in the field of low power computing, optical computing, quantum computing and other computing technologies. Rotating and data shifting are required in many operations such as logical and arithmetic operations, indexing and address decoding etc. Hence barrel shifters which can shift and rotate multiple bits in a single cycle have become a common choice of design for high speed applications. The design has been done using reversible fredkin and feynman gates. In the design the 2:1 mux can be implemented by fredkin gate which reduce quantum cost, number of ancilla bits and number of garbage outputs. The feynman gate will remove the fanout. By comparing the quantum cost, number of ancilla bits and number of garbage outputs the design is evaluated.

scholarly journals 4-bit Carry Look Ahead Adder Using MGDI Technique

2021 ◽  
Vol 9 (9) ◽  
pp. 855-860
Author(s):  
Shaik Mahammad Ameer Afridi
Keyword(s):  
Integrated Circuits ◽  
Low Power ◽  
Power Dissipation ◽  
High Performance ◽  
Digital Signal ◽  
Vlsi Circuits ◽  
Digital Vlsi ◽  
Look Ahead ◽  
Energy Trade ◽  
Integral Role

Abstract: Today's high-performance processor is built with arithmetic logic units that add and subtract key components. Design considerations related to low power and high performance digital VLSI circuits have become more prevalent in today's world. In order to develop low-power and high-performance processors, the designers need to design their adder circuits with the required speed and power dissipation for their applications. This topic introduces the concept of a adder using MGDI Technique. The Exact Speculative Carry Look Ahead Adder the use of the Modified-GDI (Modified-Gate Diffusion Input) is cautioned in this work. The delay, location and energy trade off performs a integral role in VLSI. We already comprehend that designs which are of CMOS fashion occupy extra area might also eat extra strength consumption. The switching conduct of the circuit reason the heating up of integrated circuits affects the working stipulations of the purposeful unit. The adders are the most important parts of countless applications such as microprocessors, microcontrollers and digital signal processors and additionally in actual time applications. Hence it is necessary to minimize the adder blocks to format a perfect processor. This work is proposed on a 16 bit carry seem to be in advance adder is designed through using MGDI gate and 4T XOR gates and a speculator blocks. The proposed MGDI raise Look Ahead adder occupies 68% much less region and the strength consumption and the propagation extend additionally considerably reduces when in contrast to the traditional carry Look Ahead adder why because the variety transistors extensively reduces from 1448 (Conventional) to 456 (Proposed CLA). The simulation consequences of the proposed format carried out in Xilinx. Keywords: Delay, power dissipation, voltage, transistor sizing.

Low-power consumption seamless wireless and wired links using transparent waveform transfer

2014 ◽  
Vol 3 (5-6) ◽  
Author(s):  
Tetsuya Kawanishi
Keyword(s):  
Power Consumption ◽  
Optical Fiber ◽  
Low Power ◽  
Millimeter Wave ◽  
Optical Fibers ◽  
High Speed ◽  
High Performance ◽  
Digital Signal ◽  
Low Power Consumption ◽  
Wireless Links

AbstractThis paper describes wired and wireless seamless networks consisting of radiowave and optical fiber links. Digital coherent technology developed for high-speed optical fiber transmission can mitigate signal deformation in radiowave links in the air as well as in optical fibers. Radio-over-fiber (RoF) technique, which transmits radio waveforms on intensity envelops of optical signals, can provide direct waveform transfer between optical and radio signals by using optical-to-electric or electric-to-optical conversion devices. Combination of RoF in millimeter-wave bands and digital coherent with high-performance digital signal processing (DSP) can provide wired and wireless seamless links where bit rate of wireless links would be close to 100 Gb/s. Millimeter-wave transmission distance would be shorter than a few kilometers due to large atmospheric attenuation, so that many moderate distance wireless links, which are seamlessly connected to optical fiber networks should be required to provide high-speed mobile-capable networks. In such systems, reduction of power consumption at media converters connecting wired and wireless links would be very important to pursue both low-power consumption and large capacity.

scholarly journals Introduction to the Special Issue on Digital Signal Processing in Radio Astronomy

2016 ◽  
Vol 05 (04) ◽  
pp. 1602002 ◽  
Author(s):  
D. C. Price ◽  
J. Kocz ◽  
M. Bailes ◽  
L. J. Greenhill
Keyword(s):  
Signal Processing ◽  
Digital Signal Processing ◽  
Radio Astronomy ◽  
Graphics Processing Units ◽  
High Speed ◽  
High Performance ◽  
Digital Signal ◽  
General Purpose ◽  
Special Issue ◽  
Dsp Systems

Advances in astronomy are intimately linked to advances in digital signal processing (DSP). This special issue is focused upon advances in DSP within radio astronomy. The trend within that community is to use off-the-shelf digital hardware where possible and leverage advances in high performance computing. In particular, graphics processing units (GPUs) and field programmable gate arrays (FPGAs) are being used in place of application-specific circuits (ASICs); high-speed Ethernet and Infiniband are being used for interconnect in place of custom backplanes. Further, to lower hurdles in digital engineering, communities have designed and released general-purpose FPGA-based DSP systems, such as the CASPER ROACH board, ASTRON Uniboard, and CSIRO Redback board. In this introductory paper, we give a brief historical overview, a summary of recent trends, and provide an outlook on future directions.

scholarly journals DESIGN OF HIGH PERFORMANCE MULTIPLIERLESS LINEAR PHASE FINITE IMPULSE RESPONSE FILTERS

2017 ◽  
Vol 10 (13) ◽  
pp. 66
Author(s):  
A Aparna ◽  
T Vigneswaran
Keyword(s):  
Low Power ◽  
Impulse Response ◽  
High Speed ◽  
High Performance ◽  
Finite Impulse Response ◽  
Research Work ◽  
Digital Signal ◽  
Fir Filter ◽  
Pass Filter ◽  
Finite Impulse Response Filters

This research work proposes the finite impulse response (FIR) filters design using distributed arithmetic architecture optimized for field programmable gate array. To implement computationally efficient, low power, high-speed FIR filter a two-dimensional fully pipelined structure is used. The FIR filter is dynamically reconfigured to realize low pass and high pass filter by changing the filter coefficients. The FIR filter is most fundamental components in digital signal processing for high-speed application. The aim of this research work is to design multiplier-less FIR filter for the requirements of low power and high speed various embedded applications. 

scholarly journals VLSI Architecture of High Performance Multiplier for High Speed Applications

2020 ◽  
Vol 9 (3) ◽  
pp. 442-445
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
High Performance ◽  
Vlsi Design ◽  
Vlsi Architecture ◽  
Digital Signal ◽  
Full Adder ◽  
Vital Role ◽  
Path Delay

In the application of digital signal process multipliers play a vital role. With advances in technology, several researchers have tried and try to design multipliers which supply high speed, low power consumption, regularity of layout and thus less space or maybe combination of them in one multiplier factor. Thus, Compact VLSI design for four bit multiplier factor is planned during this paper that is appropriate for low power and high speed applications. Multiplier factor with high performance is achieved through the novel style of hybrid single bit full adder and Dadda algorithmic rule. The important path delay and power consumption of the planned multiplier factor square measure reduced by 65.9% and 24.5% severally when put next with existing multipliers. The planned multiplier factor is synthesized exploitation CADENCE five.1.0 EDA tool and simulated exploitation spectre virtuoso.

Performance Analysis of Various Multipliers Using 8T-full Adder with 180nm Technology

2020 ◽  
Vol 13 (6) ◽  
pp. 864-870
Author(s):  
Sai Venkatramana Prasada G.S ◽  
G. Seshikala ◽  
S. Niranjana
Keyword(s):  
Low Power ◽  
Power Dissipation ◽  
High Speed ◽  
High Performance ◽  
Full Adder ◽  
Fundamental Operation ◽  
Wallace Tree ◽  
Power Delay Product ◽  
The Comparative Study ◽  
Wallace Tree Multiplier

Background: This paper presents the comparative study of power dissipation, delay and power delay product (PDP) of different full adders and multiplier designs. Methods: Full adder is the fundamental operation for any processors, DSP architectures and VLSI systems. Here ten different full adder structures were analyzed for their best performance using a Mentor Graphics tool with 180nm technology. Results: From the analysis result high performance full adder is extracted for further higher level designs. 8T full adder exhibits high speed, low power delay and low power delay product and hence it is considered to construct four different multiplier designs, such as Array multiplier, Baugh Wooley multiplier, Braun multiplier and Wallace Tree multiplier. These different structures of multipliers were designed using 8T full adder and simulated using Mentor Graphics tool in a constant W/L aspect ratio. Conclusion: From the analysis, it is concluded that Wallace Tree multiplier is the high speed multiplier but dissipates comparatively high power. Baugh Wooley multiplier dissipates less power but exhibits more time delay and low PDP.

scholarly journals Ultracompact and low-power-consumption silicon thermo-optic switch for high-speed data

Nanophotonics ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 937-945
Author(s):  
Ruihuan Zhang ◽  
Yu He ◽  
Yong Zhang ◽  
Shaohua An ◽  
Qingming Zhu ◽  
...  
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
High Performance ◽  
Pulse Amplitude ◽  
Telecommunication Networks ◽  
Low Power Consumption ◽  
Power Efficient ◽  
High Speed Data ◽  
On Chip

AbstractUltracompact and low-power-consumption optical switches are desired for high-performance telecommunication networks and data centers. Here, we demonstrate an on-chip power-efficient 2 × 2 thermo-optic switch unit by using a suspended photonic crystal nanobeam structure. A submilliwatt switching power of 0.15 mW is obtained with a tuning efficiency of 7.71 nm/mW in a compact footprint of 60 μm × 16 μm. The bandwidth of the switch is properly designed for a four-level pulse amplitude modulation signal with a 124 Gb/s raw data rate. To the best of our knowledge, the proposed switch is the most power-efficient resonator-based thermo-optic switch unit with the highest tuning efficiency and data ever reported.

scholarly journals DSPSR: Digital Signal Processing Software for Pulsar Astronomy

2011 ◽  
Vol 28 (1) ◽  
pp. 1-14 ◽  
Author(s):  
W. van Straten ◽  
M. Bailes
Keyword(s):  
Signal Processing ◽  
Digital Signal Processing ◽  
Graphics Processing Units ◽  
High Performance ◽  
Digital Signal ◽  
General Purpose ◽  
Design Decisions ◽  
Extensive Range ◽  
Processing Software ◽  
Graphics Processing

Abstractdspsr is a high-performance, open-source, object-oriented, digital signal processing software library and application suite for use in radio pulsar astronomy. Written primarily in C++, the library implements an extensive range of modular algorithms that can optionally exploit both multiple-core processors and general-purpose graphics processing units. After over a decade of research and development, dspsr is now stable and in widespread use in the community. This paper presents a detailed description of its functionality, justification of major design decisions, analysis of phase-coherent dispersion removal algorithms, and demonstration of performance on some contemporary microprocessor architectures.

LOW-POWER, PARALLEL INTERFACE WITH CONTINUOUS-TIME ADAPTIVE PASSIVE EQUALIZER AND CROSSTALK CANCELLATION

2005 ◽  
Vol 15 (02) ◽  
pp. 459-476
Author(s):  
C. PATRICK YUE ◽  
JAEJIN PARK ◽  
RUIFENG SUN ◽  
L. RICK CARLEY ◽  
FRANK O'MAHONY
Keyword(s):  
Low Power ◽  
Electromagnetic Interference ◽  
Continuous Time ◽  
High Speed ◽  
High Performance ◽  
Process Variations ◽  
Cmos Process ◽  
Power Circuit ◽  
Crosstalk Cancellation ◽  
Circuit Components

This paper presents the low-power circuit techniques suitable for high-speed digital parallel interfaces each operating at over 10 Gbps. One potential application for such high-performance I/Os is the interface between the channel IC and the magnetic read head in future compact hard disk systems. First, a crosstalk cancellation technique using a novel data encoding scheme is introduced to suppress electromagnetic interference (EMI) generated by the adjacent parallel I/Os . This technique is implemented utilizing a novel 8-4-PAM signaling with a data look-ahead algorithm. The key circuit components in the high-speed interface transceiver including the receive sampler, the phase interpolator, and the transmitter output driver are described in detail. Designed in a 0.13-μm digital CMOS process, the transceiver consumes 310 mW per 10-Gps channel from a I-V supply based on simulation results. Next, a 20-Gbps continuous-time adaptive passive equalizer utilizing on-chip lumped RLC components is described. Passive equalizers offer the advantages of higher bandwidth and lower power consumption compared with conventional designs using active filter. A low-power, continuous-time servo loop is designed to automatically adjust the equalizer frequency response for the optimal gain compensation. The equalizer not only adapts to different channel characteristics, but also accommodates temperature and process variations. Implemented in a 0.25-μm, 1P6M BiCMOS process, the equalizer can compensate up to 20 dB of loss at 10 GHz while only consumes 32 mW from a 2.5-V supply.

Sign in / Sign up

Export Citation Format

Share Document