A Direct Bulk Coupling PMOS Colpitts QVCO Using Capacitive-Feedback Structure

2019 ◽  
Vol 28 (08) ◽  
pp. 1950125
Author(s):  
Jianqun Ding ◽  
Lijun Huang ◽  
Xianwu Mi ◽  
Dajiang He ◽  
Shenghai Chen ◽  
...  
Keyword(s):  
Power Dissipation ◽  
Figure Of Merit ◽  
Supply Voltage ◽  
Voltage Controlled Oscillator ◽  
Chip Area ◽  
Low Power Dissipation ◽  
Feedback Structure ◽  
Voltage Swing ◽  
Low Supply Voltage ◽  
Capacitive Feedback

In this paper, a full PMOS Colpitts quadrature voltage-controlled oscillator (QVCO) topology, suitable for low supply voltage and low power dissipation, is presented. For an enhanced voltage swing under a low supply voltage, the capacitive-feedback technique is employed. Quadrature coupling is achieved by employing direct bulk coupling technique, leading to reduction in both power and chip area. The proposed QVCO covers a 5% tuning range between 2.325 GHz and 2.435 GHz, and the phase noise is [Formula: see text]128.2 dBc/Hz at 1-MHz offset from the 2.34-GHz carrier while consuming only 0.535 mW from 0.55-V supply voltage, yielding a figure-of-merit (FoM) of 198 dBc/Hz.

Design of a Rail-to-Rail Operational Amplifier with Low Supply Voltage and Low Power Dissipation

2013 ◽  
Vol 380-384 ◽  
pp. 3275-3278
Author(s):  
Zhan Peng Jiang ◽  
Rui Xu ◽  
Hai Huang ◽  
Chang Chun Dong
Keyword(s):  
Power Dissipation ◽  
Operational Amplifier ◽  
Supply Voltage ◽  
High Gain ◽  
Op Amp ◽  
Rail To Rail ◽  
Dc Gain ◽  
Low Power Dissipation ◽  
Static Power ◽  
Low Supply Voltage

An rail-to-rail operational amplifier is presented in this paper, which is designed by with two op amp, the first level of the structure is the complementary differential structure which will providing input for the operational amplifier, the second level is designed with the structure of folding cascode to get a high gain. The operational amplifier is designed with the TSMC 0.35u m3.3VCMOS mixed analog-digital technology library. The simulated results show that the operational amplifier has a DC gain of 110dB,a GBW of 9.5MHz,a static power dissipation of 0.95mW,a phase margin of 73°,a voltage slew rate of 8.2V/μS,an input and output range of 0-3.3V,when operating at 3.3V power supply and a 20pF output load.

Ground-Adjustable Inductor for Wide-Tuning VCO Design

2012 ◽  
Vol 256-259 ◽  
pp. 2373-2378
Author(s):  
Wu Shiung Feng ◽  
Chin I Yeh ◽  
Ho Hsin Li ◽  
Cheng Ming Tsao
Keyword(s):  
Power Consumption ◽  
Tuning Range ◽  
Supply Voltage ◽  
Wide Band ◽  
Ultra Wide Band ◽  
Cmos Process ◽  
Voltage Controlled Oscillator ◽  
Wide Tuning Range ◽  
Chip Area ◽  
Ground Plate

A wide-tuning range voltage-controlled oscillator (VCO) with adjustable ground-plate inductor for ultra-wide band (UWB) application is presented in this paper. The VCO was implemented by standard 90nm CMOS process at 1.2V supply voltage and power consumption of 6mW. The tuning range from 13.3 GHz to 15.6 GHz with phase noise between -99.98 and -115dBc/Hz@1MHz is obtained. The output power is around -8.7 to -9.6dBm and chip area of 0.77x0.62mm2.

A 12-BIT 400-MS/s CURRENT-STEERING DAC WITH DEGLITCHING TECHNIQUE

2014 ◽  
Vol 23 (01) ◽  
pp. 1450004 ◽  
Author(s):  
XIAOBO XUE ◽  
XIAOLEI ZHU ◽  
QIFENG SHI ◽  
LENIAN HE
Keyword(s):  
Dynamic Range ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Signal Frequency ◽  
Current Steering ◽  
Digital To Analog Converter ◽  
Measurement Results ◽  
Voltage Swing ◽  
Current Steering Dac ◽  
Low Supply Voltage

In this paper, a 12-bit current-steering digital-to-analog converter (DAC) employing a deglitching technique is proposed. The deglitching technique is realized by lowering the voltage swing of the control signal as well as by using a method of glitch counteraction (GC). A new switch–driver structure is designed to enable the effectiveness of the GC and provide sufficient driving capability under a low supply voltage. Moreover, the control signal's rise/fall asymmetry which increases the glitch error can be suppressed by using the proposed switch–driver structure. The 12-bit DAC is implemented in 180 nm CMOS technology. The measurement results show that the spurious free dynamic range (SFDR) at low signal frequency is 78.8 dB, and it is higher than 70 dB up to 60 MHz signal frequency at 400 MS/s. The measured INL and DNL are both less than ±0.6 LSB.

scholarly journals Analysis of Main LC-VCO Parameters for Multistandard Tranceivers

2017 ◽  
Vol 9 (3) ◽  
pp. 324-328 ◽  
Author(s):  
Vytautas Mačaitis ◽  
Romualdas Navickas
Keyword(s):  
Power Supply ◽  
Carrier Frequency ◽  
Power Dissipation ◽  
Figure Of Merit ◽  
Tuning Range ◽  
Supply Voltage ◽  
Quality Function ◽  
Voltage Controlled Oscillators ◽  
Cmos Ic ◽  
Ic Technology

This paper reviews CMOS LC Voltage Controlled Oscillators (VCO) for wireless multi-standard transceivers and wireless communications. The main parameters, such as IC technology, phase noise, carrier frequency, supply voltage, tuning range, power dissipation, figure of merit (FOMT and FOMTT) were reviewed in this paper. These parameters were taken of 20 articles published in 2012–2016 years. Of the reviewed articles it can be said that most VCOs was designed in 180 nm (55%) and 65 nm (25%) CMOS IC technology. FOMTT quality function has been proposed for extended VCO quality assessment. FOMTT quality function additionally evaluates VCO IC technology, and the power supply.

scholarly journals DIGITAL CONTROLLED OSCILLATOR (DCO) FOR ALL DIGITAL PHASE-LOCKED LOOP (ADPLL) – A REVIEW

2019 ◽  
Vol 82 (1) ◽  
Author(s):  
Florence Choong ◽  
Mamun Ibne Reaz ◽  
Mohamad Ibrahim Kamaruzzaman ◽  
Md. Torikul Islam Badal ◽  
Araf Farayez ◽  
...  
Keyword(s):  
Supply Voltage ◽  
Complementary Metal Oxide Semiconductor ◽  
Phase Locked Loop ◽  
Cmos Technology ◽  
Oxide Semiconductor ◽  
Cmos Process ◽  
Process Technology ◽  
Chip Area ◽  
Digital Phase ◽  
Low Power Dissipation

Digital controlled oscillator (DCO) is becoming an attractive replacement over the voltage control oscillator (VCO) with the advances of digital intensive research on all-digital phase locked-loop (ADPLL) in complementary metal-oxide semiconductor (CMOS) process technology. This paper presents a review of various CMOS DCO schemes implemented in ADPLL and relationship between the DCO parameters with ADPLL performance. The DCO architecture evaluated through its power consumption, speed, chip area, frequency range, supply voltage, portability and resolution. It can be concluded that even though there are various schemes of DCO that have been implemented for ADPLL, the selection of the DCO is frequently based on the ADPLL applications and the complexity of the scheme. The demand for the low power dissipation and high resolution DCO in CMOS technology shall remain a challenging and active area of research for years to come. Thus, this review shall work as a guideline for the researchers who wish to work on all digital PLL.

scholarly journals Floating Active Inductor Based Trans-Impedance Amplifier in 0.18 μm CMOS Technology for Optical Applications

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1547
Author(s):  
Xiangyu Chen ◽  
Yasuhiro Takahashi
Keyword(s):  
Power Dissipation ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Chip Area ◽  
Active Inductors ◽  
Low Pass ◽  
Optical Applications ◽  
Fifth Order

In this paper, a transimpedance amplifier (TIA) based on floating active inductors (FAI) is presented. Compared with conventional TIAs, the proposed TIA has the advantages of a wider bandwidth, lower power dissipation, and smaller chip area. The schematics and characteristics of the FAI circuit are explained. Moreover, the proposed TIA employs the combination of capacitive degeneration, the broadband matching network, and the regulated cascode input stage to enhance the bandwidth and gain. This turns the TIA design into a fifth-order low pass filter with Butterworth response. The TIA is implemented using 0.18 μ m Rohm CMOS technology and consumes only 10.7 mW with a supply voltage of 1.8 V. When used with a 150 fF photodiode capacitance, it exhibits the following characteristics: gain of 41 dB Ω and −3 dB frequency of 10 GHz. This TIA occupies an area of 180 μ m × 118 μ m.

scholarly journals Current mismatch reduction in charge pumps using regulated current stealing-injecting transistors for PLLs

2021 ◽  
Vol 24 (1) ◽  
pp. 61
Author(s):  
Mohd Khairi Zulkalnain ◽  
Yan Chiew Wong
Keyword(s):  
Metal Oxide ◽  
Supply Voltage ◽  
Channel Length ◽  
Feedback Mechanism ◽  
Phase Locked Loops ◽  
Voltage Controlled Oscillator ◽  
Op Amp ◽  
Compensation Technique ◽  
A Charge ◽  
Low Supply Voltage

A charge pump for phase locked loops (PLL) with a novel current mismatch compensation technique is proposed. The proposed circuit uses a simple yet effective current stealing-injecting (CSI) technique and feedback to reduce mismatch between the negative-channel-metal-oxide (NMOS) and positive-channel-metal-oxide (PMOS) transistors. The current stealing transistor steals the current from a replica branch and mirrors it to the output where it is added to the output branch by the injecting transistor. A feedback mechanism is used to set the drain voltages of both branches to be equal and mitigate channel length modulation and ensure high accuracy. The proposed circuit was designed on Silterra 130nm technology and simulated using Cadence Spectre. The simulation results show that the proposed circuit yields a maximum of 0.107% and minimum of 0.00465% current mismatch while operating at a low supply voltage of 800mV for a range of 100mV to 700mV. The proposed design uses only one rail-to-rail op amp for compensating the mismatch and an addition of 4 transistors and utilizing 75% of the supply voltage for high voltage controlled oscillator (VCO) tuning range.

Analytical Modeling of D.C. Parameters of Double Gate Junctionless MOSFET in Near and Subthreshold Regime for RF Circuit Application

2020 ◽  
Vol 10 (4) ◽  
pp. 457-470 ◽  
Author(s):  
Dipanjan Sen ◽  
Savio J. Sengupta ◽  
Swarnil Roy ◽  
Manash Chanda ◽  
Subir K. Sarkar
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Circuit Design ◽  
Power Dissipation ◽  
Supply Voltage ◽  
Dominant Factor ◽  
Double Gate ◽  
Cmos Inverter ◽  
Ultra Low Power ◽  
Voltage Swing

Aims:: In this work, a Junction-Less Double Gate MOSFET (JLDG MOSFET) based CMOS inverter circuit is proposed for ultra-low power applications in the near and sub-threshold regime operations. Background:: D.C. performances like power, delay and voltage swing of the proposed Inverter have been modeled analytically and analyzed in depth. JLDG MOSFET has promising features to reduce the short-channel effects compared to the planner MOSFET because of better gate control mechanism. So, proposed Inverter would be efficacious to offer less power dissipation and higher speed. Objective:: Impact of supply voltage, temperature, High-k gate oxide, TOX, TSI on the power, delay and voltage swing of the Inverter circuits have been detailed here. Methods: Extensive simulations using SILVACO ATLAS have been done to validate the proposed logic based digital circuits. Besides, the optimum supply voltage has been modelled and verified through simulation for low voltage operations. In depth analysis of voltage swing is added to measure the noise immunity of the proposed logic based circuits in Sub & Near-threshold operations. For ultra-low power operation, JLDG MOSFET can be an alternative compared to conventional planar MOSFET. Result:: Hence, the analytical model of delay, power dissipation and voltage swing have been proposed of the proposed logic based circuits. Besides, the ultra-low power JLDG CMOS inverter can be an alternative in saving energy, reduction of power consumption for RFID circuit design where the frequency range is a dominant factor. Conclusion:: The power consumption can be lowered in case of UHF, HF etc. RF circuits using the Double Gate Junction-less MOSFET as a device for circuit design.

Sign in / Sign up

Export Citation Format

Share Document