scholarly journals Downconverting Module Architectures for High Performance Multipixel Cameras

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Diego Palombini ◽  
Maciej Jankowski ◽  
Ernesto Limiti
Keyword(s):  
High Performance ◽  
Local Oscillator ◽  
Frequency Range ◽  
Frequency Multiplication ◽  
Band Frequency ◽  
System Architectures ◽  
Sky Surveys ◽  
And Performance ◽  
Scanning Systems ◽  
Speed And Accuracy

Multipixel cameras represent an emerging topology for arrays receivers, improving speed and accuracy of both security scanning systems and radioastronomical sky surveys by means of a matrix of phased elements. Difficulties in the generation and proper distribution to each pixel of the local oscillator signal still limit their use to frequency ranges below a few GHz or at least seriously affect the complexity of the implementable cameras. This work presents a full comparison between two possible system architectures, alternatively based on LO frequency multiplication or subharmonic mixing strategies, aiming to overcome the aforesaid limitations: design and performance of two compact test vehicles in MMIC technology, both operating in the Q-band frequency range with ultrabroadband IF section, are reported.

scholarly journals Supersensitive Detector of Hydrosphere Pressure Variations

Sensors ◽  
2020 ◽  
Vol 20 (23) ◽  
pp. 6998
Author(s):  
Grigory Dolgikh ◽  
Sergey Budrin ◽  
Stanislav Dolgikh ◽  
Aleksandr Plotnikov
Keyword(s):  
High Performance ◽  
Michelson Interferometer ◽  
Frequency Range ◽  
Registration System ◽  
Operating Range ◽  
Neon Laser ◽  
Helium Neon Laser ◽  
Order Of Magnitude ◽  
Helium Neon ◽  
Speed And Accuracy

This paper presents an instrument based on an equal-arm Michelson interferometer and a frequency-stabilized helium-neon laser. It is designed to record hydrosphere pressure variations in the frequency range from 0 (conventionally) to 1000 Hz, with accuracy of 0.24 mPa at sea depths of up to 50 m. The operating range of the instrument can be increased by order of magnitude by improving the registration system speed, and accuracy can be enhanced by using larger diameter membranes and/or their smaller thickness. The paper demonstrates some experimental results obtained on the supersensitive detector of hydrosphere pressure variations, confirming its high performance in the infrasonic and sonic ranges.

Design of Local Oscillator Based on DDS of High Performance Short-Wave Receiver

2013 ◽  
Vol 834-836 ◽  
pp. 1140-1144 ◽  
Author(s):  
Yong Tai Chen ◽  
Chang Jing Sun ◽  
Bin Zang ◽  
Long Cheng ◽  
Jing Tang ◽  
...  
Keyword(s):  
High Performance ◽  
Gain Control ◽  
Local Oscillator ◽  
Short Wave ◽  
Frequency Multiplier ◽  
Test Results ◽  
Frequency Range ◽  
Front End ◽  
Tracking Filter ◽  
Spurious Signals

Phase noise and spurious signals of local oscillator will affect the performance of short-wave receiver. The structure of receiver's front-end part based on DDS is introduced to realize a high-performance local oscillator of short-wave receiver. Then measures were taken to improve the LO's performance, including using external directly frequency multiplier as DDS' clock to improve the purity of frequency spectrum, tracking filter to degrade harmonics and gain control circuit to remain constant amplitude in the desired frequency range. At last, test results show that the above-mentioned measures improve the receiver's performance.

Heterogeneous integration of a miniaturized W-band radar module

2015 ◽  
Vol 2015 (1) ◽  
pp. 000766-000770 ◽  
Author(s):  
K.-F. Becker ◽  
L. Georgi ◽  
R. Kahle ◽  
S. Voges ◽  
F. Brandenburger ◽  
...  
Keyword(s):  
Electromagnetic Waves ◽  
High Performance ◽  
Continuous Wave ◽  
Low Cost ◽  
Distance Measurement ◽  
Heterogeneous Integration ◽  
Frequency Range ◽  
Band Frequency ◽  
Technological Basis ◽  
W Band

For radar applications, the W-band frequency range (75 – 110 GHz) is a good candidate for high-resolution distance measurement and remote detection of small or hidden objects in distances of 10 cm to ≫ 20 m. As electromagnetic waves in this frequency range can easily penetrate rough atmosphere like fog, smoke or dust, W-band radars are perfectly suited for automotive, aviation, industrial and security applications. Additional benefit is that atmosphere has an absorption minimum at 94 GHz, so relative small output power is sufficient to achieve long range coverage. By combining and enhancing knowledge from the disciplines of heterogeneous integration technology and compound semiconductor-technology, the Fraunhofer Institutes IAF, IPA and IZM developed a miniaturized and low cost 94 GHz radar module. Result of this approach is a highly miniaturized radar module built using a modular approach. The radar components are mounted on a dedicated RF-NF-hybrid PCB while the signal processing is done on a separate board stacked below. This hybrid RF-module is combined with highly integrated digital processing PCB via micro connectors in a way that the radar system and an adapted conical HDPE-lens fit into an aluminum housing of 42×80×27 mm3 with a weight of only 160 grams for the whole module. The paper will describe the technological basis for such a frequency modulated continuous wave [FMCW] W-band radar module and describe in detail the technological features that enabled the assembly of such a miniaturized but high-performance system. The module yields an evaluated distance measurement accuracy of 5 ppm (5 μm deviation per meter target distance) while its low weight and small dimensions pave the way for a variety of new applications, including mobile operation.

Trace nanoanalysis

1994 ◽  
Vol 52 ◽  
pp. 940-941
Author(s):  
D. E. Newbury ◽  
R. D. Leapman
Keyword(s):  
High Performance ◽  
Secondary Ion Mass Spectrometry ◽  
Detection Efficiency ◽  
Volume Element ◽  
And Performance ◽  
Trace Constituents ◽  
Secondary Ion ◽  
Concentration Levels ◽  
Structure Properties

Trace constituents, which can be very loosely defined as those present at concentration levels below 1 percent, often exert influence on structure, properties, and performance far greater than what might be estimated from their proportion alone. Defining the role of trace constituents in the microstructure, or indeed even determining their location, makes great demands on the available array of microanalytical tools. These demands become increasingly more challenging as the dimensions of the volume element to be probed become smaller. For example, a cubic volume element of silicon with an edge dimension of 1 micrometer contains approximately 5×1010 atoms. High performance secondary ion mass spectrometry (SIMS) can be used to measure trace constituents to levels of hundreds of parts per billion from such a volume element (e. g., detection of at least 100 atoms to give 10% reproducibility with an overall detection efficiency of 1%, considering ionization, transmission, and counting).

https://imsciences.edu.pk/files/journals/vol12_2/New%201%20MA.864.pdf

2020 ◽  
Vol 12 (2) ◽  
pp. 19-50 ◽  
Author(s):  
Muhammad Siddique ◽  
Shandana Shoaib ◽  
Zahoor Jan
Keyword(s):  
Organizational Performance ◽  
Structural Equation ◽  
High Performance ◽  
Service Sector ◽  
Performance Outcomes ◽  
Theory And Practice ◽  
Relational Coordination ◽  
Multiple Sources ◽  
And Performance ◽  
High Level

A key aspect of work processes in service sector firms is the interconnection between tasks and performance. Relational coordination can play an important role in addressing the issues of coordinating organizational activities due to high level of interdependence complexity in service sector firms. Research has primarily supported the aspect that well devised high performance work systems (HPWS) can intensify organizational performance. There is a growing debate, however, with regard to understanding the “mechanism” linking HPWS and performance outcomes. Using relational coordination theory, this study examines a model that examine the effects of subsets of HPWS, such as motivation, skills and opportunity enhancing HR practices on relational coordination among employees working in reciprocal interdependent job settings. Data were gathered from multiple sources including managers and employees at individual, functional and unit levels to know their understanding in relation to HPWS and relational coordination (RC) in 218 bank branches in Pakistan. Data analysis via structural equation modelling, results suggest that HPWS predicted RC among officers at the unit level. The findings of the study have contributions to both, theory and practice.

scholarly journals Numerical algorithms for high-performance computational science

2020 ◽  
Vol 378 (2166) ◽  
pp. 20190066 ◽  
Author(s):  
Jack Dongarra ◽  
Laura Grigori ◽  
Nicholas J. Higham
Keyword(s):  
High Performance ◽  
Numerical Algorithms ◽  
Computational Science ◽  
Floating Point ◽  
Important Criterion ◽  
Data Movement ◽  
Floating Point Arithmetic ◽  
High Performance Computers ◽  
Point Arithmetic ◽  
Speed And Accuracy

A number of features of today’s high-performance computers make it challenging to exploit these machines fully for computational science. These include increasing core counts but stagnant clock frequencies; the high cost of data movement; use of accelerators (GPUs, FPGAs, coprocessors), making architectures increasingly heterogeneous; and multi- ple precisions of floating-point arithmetic, including half-precision. Moreover, as well as maximizing speed and accuracy, minimizing energy consumption is an important criterion. New generations of algorithms are needed to tackle these challenges. We discuss some approaches that we can take to develop numerical algorithms for high-performance computational science, with a view to exploiting the next generation of supercomputers. This article is part of a discussion meeting issue ‘Numerical algorithms for high-performance computational science’.

scholarly journals Study on strong spinning preparation method and mechanism of the industrial pure titanium ultrafine crystallization

2019 ◽  
Vol 14 ◽  
pp. 155892501989525
Author(s):  
Yu Yang ◽  
Yanyan Jia
Keyword(s):  
Heat Treatment ◽  
High Performance ◽  
Pure Titanium ◽  
Grain Structure ◽  
Theoretical Research ◽  
Ultrafine Grain ◽  
Forming Process ◽  
Spinning Process ◽  
And Performance ◽  
Material Utilization

Ultrafine crystallization of industrial pure titanium allowed for higher tensile strength, corrosion resistance, and thermal stability and is therefore widely used in medical instrumentation, aerospace, and passenger vehicle manufacturing. However, the ultrafine crystallizing batch preparation of tubular industrial pure titanium is limited by the development of the spinning process and has remained at the theoretical research stage. In this article, the tubular TA2 industrial pure titanium was taken as the research object, and the ultrafine crystal forming process based on “5-pass strong spin-heat treatment-3 pass-spreading-heat treatment” was proposed. Based on the spinning process test, the ultimate thinning rate of the method is explored and the evolution of the surface microstructure was analyzed by metallographic microscope. The research suggests that the multi-pass, medium–small, and thinning amount of spinning causes the grain structure to be elongated in the axial and tangential directions, and then refined, and the axial fiber uniformity is improved. The research results have certain scientific significance for reducing the consumption of high-performance metals improving material utilization and performance, which also promote the development of ultrafine-grain metals’ preparation technology.

High-Performance Image Filters via Sparse Approximations

2020 ◽  
Vol 3 (2) ◽  
pp. 1-19
Author(s):  
Kersten Schuster ◽  
Philip Trettner ◽  
Leif Kobbelt
Keyword(s):  
High Performance ◽  
Hardware Acceleration ◽  
Optimization Method ◽  
Translation Invariant ◽  
Approximation Quality ◽  
Trade Offs ◽  
Sparse Approximations ◽  
Image Filters ◽  
Good Trade ◽  
And Performance

We present a numerical optimization method to find highly efficient (sparse) approximations for convolutional image filters. Using a modified parallel tempering approach, we solve a constrained optimization that maximizes approximation quality while strictly staying within a user-prescribed performance budget. The results are multi-pass filters where each pass computes a weighted sum of bilinearly interpolated sparse image samples, exploiting hardware acceleration on the GPU. We systematically decompose the target filter into a series of sparse convolutions, trying to find good trade-offs between approximation quality and performance. Since our sparse filters are linear and translation-invariant, they do not exhibit the aliasing and temporal coherence issues that often appear in filters working on image pyramids. We show several applications, ranging from simple Gaussian or box blurs to the emulation of sophisticated Bokeh effects with user-provided masks. Our filters achieve high performance as well as high quality, often providing significant speed-up at acceptable quality even for separable filters. The optimized filters can be baked into shaders and used as a drop-in replacement for filtering tasks in image processing or rendering pipelines.

scholarly journals Low-Process–Voltage–Temperature-Sensitivity Multi-Stage Timing Monitor for System-on-Chip Applications

Electronics ◽  
2021 ◽  
Vol 10 (13) ◽  
pp. 1587
Author(s):  
Duo Sheng ◽  
Hsueh-Ru Lin ◽  
Li Tai
Keyword(s):  
High Performance ◽  
Power Reduction ◽  
System On Chip ◽  
Timing Information ◽  
Multi Stage ◽  
Dynamic Voltage ◽  
And Performance ◽  
On Chip ◽  
Maximum Measurement ◽  
Maximum Measurement Error

High performance and complex system-on-chip (SoC) design require a throughput and stable timing monitor to reduce the impacts of uncertain timing and implement the dynamic voltage and frequency scaling (DVFS) scheme for overall power reduction. This paper presents a multi-stage timing monitor, combining three timing-monitoring stages to achieve a high timing-monitoring resolution and a wide timing-monitoring range simultaneously. Additionally, because the proposed timing monitor has high immunity to the process–voltage–temperature (PVT) variation, it provides a more stable time-monitoring results. The time-monitoring resolution and range of the proposed timing monitor are 47 ps and 2.2 µs, respectively, and the maximum measurement error is 0.06%. Therefore, the proposed multi-stage timing monitor provides not only the timing information of the specified signals to maintain the functionality and performance of the SoC, but also makes the operation of the DVFS scheme more efficient and accurate in SoC design.

Sign in / Sign up

Export Citation Format

Share Document