scholarly journals Biocomposites Developed with Litchi Peel Based on Epoxy Resin: Mechanical Properties and Flame Retardant

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Tuan Anh Nguyen
Keyword(s):  
Mechanical Properties ◽  
Epoxy Resin ◽  
Low Cost ◽  
Natural Fibers ◽  
Phase Interface ◽  
Polymeric Materials ◽  
Two Phase ◽  
Sem Images ◽  
Limiting Oxygen Index ◽  
New Type

Bio-based composites are reinforced polymeric materials, which include one or two bio-based components. Biocomposites have recently attracted great attention for applications ranging from home appliances to the automotive industry. The outstanding advantages are low cost, biodegradability, lightness, availability, and solving environmental problems. In recent days, biodegradable natural fibers are attracting a great deal of interest from researchers to work on and develop a new type of composite material for diverse applications. The objective of this work is to evaluate fire resistance and mechanical properties of epoxy polymer composites reinforced with lychee peel (Vietnam), at 10 wt%, 20 wt%, and 30 wt% mass%. The study showed that the mechanical properties and flame retardancy tended to increase in the presence of lychee peel reinforcement. In the combined ratios, 20 wt% lychee rind gave a limiting oxygen index of 21.5%, with a burning rate of 23.45 mm/min. In terms of mechanical strength, in which the Izod impact strength increased by 26.46%, the compressive strength increased by 25.20% and the tensile strength increased by 20.62%. The microscopic images (SEM images) show that the particle distribution is quite good and the adhesion and wetting compatibility on the two-phase interface of lychee peel-epoxy resin are strong.

scholarly journals Hybrid Biocomposites Based on Used Coffee Grounds and Epoxy Resin: Mechanical Properties and Fire Resistance

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Tuan Anh Nguyen ◽  
Quang Tung Nguyen
Keyword(s):  
Mechanical Properties ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Oxygen Index ◽  
Low Cost ◽  
Sem Images ◽  
Coffee Grounds ◽  
Wide Range ◽  
Sustainable Materials ◽  
Flame Retardant Properties

Studies on using biomaterials hybridized with other materials to produce biomaterials have been paid more attention due to their low cost, abundance, renewability, and degradability. Therefore, these materials are ecofriendly and nontoxic to humans. A large number of used coffee grounds (SCGs) are often discarded and replacements are necessary for dealing with environmental problems. This work developed sustainable materials by reusing SCGs. Used coffee grounds were mixed with epoxy resin at different amounts: 30 wt %, 40 wt %, 50 wt %, and 60 wt %. SCGs were treated with 0.5 N NaOH, at SCGs/NaOH ratio of 1 : 2. SEM images showed that the material with 30 wt % SCGs has good compatibility without phase division on the SCGs-epoxy interface. Results of mechanical properties of epoxy composites with 30 wt % SCGs are as follows: tensile strength of 44.81 ± 10 MPa, flexural strength of 80.07 ± 0.16 MPa, compressive strength of 112.56 ± 0.11 MPa, and Izod strength and impact of 8.21 ± 0.19 kJ/m2. In terms of flame-retardant properties, the oxygen index is limited to 20.8% ± 0.20 and the burning rate according to UL94HB is 27.02 ± 0.29 mm/min. The obtained results indicate that it is possible to produce biohybrid composites from epoxy resin and SCGs. This work offers an ecofriendly alternative method to use the waste of the coffee industry. It contributes to improvements of the general characteristics of composites such as mechanical, thermal, and flame-retardant properties. This work proved that SCGs have a high potential to be used in a wide range of composite materials for civil engineering applications.

scholarly journals Fabrication, Characterization and Moisture Absorption Analysis of Sponge Fiber-Coir Reinforced Epoxy Resin Hybrid Composite

2020 ◽  
Vol 9 (1) ◽  
pp. 2744-2751
Keyword(s):  
Mechanical Properties ◽  
Epoxy Resin ◽  
Moisture Absorption ◽  
Natural Fiber ◽  
Low Cost ◽  
Matrix Material ◽  
Natural Fibers ◽  
Weight Percentage ◽  
Sponge Gourd ◽  
The Impact

Natural fiber reinforced composites are gaining popularity over conventional materials due its low cost, easy accessibility, non toxicity and most important feature - the biodegradability. Since broad varieties of natural fibers are available on earth, hence their merits can be incorporated in one by means of hybridization. Matured sponge gourd, which turns into a net structured fibrous mass on sun drying, is amalgamated with coconut coir as reinforcement along with epoxy resin as matrix material in a composite. The present study was carried out to explore the impact of change in weight percentages of sponge gourd fiber and coir on the mechanical properties and moisture affinity. The alkali treated fibers were turned into composites by dint of Hand Layup technique. The various mechanical properties were evaluated according to ASTM protocol. After the successful conclusion of the experiments, it was found that composite with maximum weight percentage of coir showed superlative tensile and impact strength whereas the composite with highest sponge fibre content showed maximum flexural strength. The composite with equal sponge fiber-coir weight percentage displayed lowest affinity towards moisture.

scholarly journals Influence of kaolin filler on the mechanical properties of Luffa cylindrica/ polyester composite

2021 ◽  
Author(s):  
Aliyu Yaro ◽  
Laminu Kuburi ◽  
Musa Abiodun Moshood
Keyword(s):  
Mechanical Properties ◽  
Polyester Resin ◽  
Unsaturated Polyester ◽  
Low Cost ◽  
Microstructural Analysis ◽  
Polymeric Materials ◽  
Weight Fraction ◽  
Industrial Applications ◽  
Luffa Cylindrica ◽  
Polyester Composite

Abstract Polymeric materials are used in different industrial applications because they retain good environmental properties, low-cost, and easy to produce compared to conventional materials. This study investigated the effect of adding kaolin micro-filler (KF) on the mechanical properties of Luffa Fiber (LCF) reinforced polyester resin. Luffa cylindrica fiber treated with 5% NaOH, varied in weight fraction (5, 10, and 15%wt) was used to reinforce unsaturated polyester resin using hand lay-up method, whereas for the hybrid composite kaolin filler were kept constant at 6wt% fraction while the fibers varied as in the mono-reinforced composite. The samples were machined for mechanical and microstructural analysis. Analysis of the result revealed that the addition of kaolin has enhanced greatly the mechanical properties of Luffa-fibre based composites. The result reveal of the microstructure analysis, shows that there is an improvement in fiber-matrix adhesion.

scholarly journals A Review on Diffusion Bonding between Titanium Alloys and Stainless Steels

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
De-feng Mo ◽  
Ting-feng Song ◽  
Yong-jian Fang ◽  
Xiao-song Jiang ◽  
Charles Q. Luo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Titanium Alloy ◽  
Titanium Alloys ◽  
Stainless Steels ◽  
Diffusion Bonding ◽  
Low Cost ◽  
Phase Interface ◽  
Intermetallic Phases ◽  
Voids Growth

High-quality joints between titanium alloys and stainless steels have found applications for nuclear, petrochemical, cryogenic, and aerospace industries due to their relatively low cost, lightweight, high corrosion resistance, and appreciable mechanical properties. This article reviews diffusion bonding between titanium alloys and stainless steels with or without interlayers. For diffusion bonding of a titanium alloy and a stainless steel without an interlayer, the optimized temperature is in the range of 800–950°C for a period of 60–120 min. Sound joint can be obtained, but brittle FeTi and Fe-Cr-Ti phases are formed at the interface. The development process of a joint mainly includes three steps: matching surface closure, growth of brittle intermetallic compounds, and formation of the Kirkendall voids. Growth kinetics of interfacial phases needs further clarification in terms of growth velocity of the reacting layer, moving speed of the phase interface, and the order for a new phase appears. The influence of Cu, Ni (or nickel alloy), and Ag interlayers on the microstructures and mechanical properties of the joints is systematically summarized. The content of FeTi and Fe-Cr-Ti phases at the interface can be declined significantly by the addition of an interlayer. Application of multi-interlayer well prevents the formation of intermetallic phases by forming solid solution at the interface, and parameters can be predicted by using a parabolic diffusion law. The selection of multi-interlayer was done based on two principles: no formation of brittle intermetallic phases and transitional physical properties between titanium alloy and stainless steel.

scholarly journals Epoxy resin filled with primary and secondary raw material – useable in agriculture

2014 ◽  
Vol 60 (No. 4) ◽  
pp. 165-171 ◽  
Author(s):  
P. Valášek ◽  
J. Kejval ◽  
M. Müller
Keyword(s):  
Mechanical Properties ◽  
Wear Resistance ◽  
Epoxy Resin ◽  
Filler Particle ◽  
Polymeric Materials ◽  
Raw Material ◽  
Nano Particles ◽  
Inorganic Particles ◽  
Increase Wear Resistance ◽  
Secondary Raw Material

Hard inorganic particles in the interaction with polymeric materials increase wear resistance. Also reactoplastics are suitable for filling with micro- and nano-particles for a purpose of some mechanical properties optimization. The paper compares chosen mechanical properties – hardness, wear resistance and tensile characteristics of epoxy resin filled with artificial corundum with various middle particles sizes and their ratio combination. Mentioned systems can be used in a sphere of the agricultural production at renovation of machine parts, they can serve for creating resistant layers on machines, floors and grillages at the same time. The aim of the carried out experiment is to compare the properties of reactoplastics filled with a primary and secondary raw material and to define an optimum ratio of the filler particle size relating to a given mechanical quality. The artificial corundum was chosen as the primary material, the waste corundum from the process of material mechanical treatment was chosen as the secondary one.    

scholarly journals Performance of lightweight mortar reinforced with doum palm fiber

2020 ◽  
pp. 002199832097519
Author(s):  
Fatma Naiiri ◽  
Allègue Lamis ◽  
Salem Mehdi ◽  
Zitoune Redouane ◽  
Zidi Mondher
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Natural Fiber ◽  
Cement Mortar ◽  
Low Cost ◽  
Natural Fibers ◽  
Construction Materials ◽  
Mechanical And Thermal Properties ◽  
Palm Fiber ◽  
And Control

Natural fibers are increasingly used in composites because of their low cost and good mechanical properties. Cement reinforced with natural fibersis contemplates as a new generation of construction materials with superior mechanical and thermal performance. This study of three sizes’effect of Doum palm fiber explores the mortar’s behavior reinforced with different fiber ratio. The aim is to determine the optimal addition to improve mechanical and thermal properties of natural fiber reinforced cements. Physical, mechanical and thermal properties of composite are examined. Tensile properties of Doum fibers are verified to determine their potential as reinforced material. Findings prove that the use of alkali-treated Doum fiber as reinforcement in cement mortar composite leads to the upgrading of the mechanical properties including thermo-physical properties against composites reinforced with raw fibers and control cement mortars. While, the compression and flexural strength of the cement mortar reinforced with alkali-treated Doum fiber with diameter 0.3 mm (CT3) are metered to be 11.11 MPa, 5.22 MPa, respectively for fiber content 0.5%. Additionally, based on thermo-physical tests, it is assessed that the thermal conductivity and diffusivity decrease for cement mortar reinforced with Doum fiber with diameter 0.2 mm (CT2).

scholarly journals Effect of reinforcements on polymer matrix bio-composites – an overview

2018 ◽  
Vol 25 (6) ◽  
pp. 1039-1058 ◽  
Author(s):  
Sumit Das Lala ◽  
Ashish B. Deoghare ◽  
Sushovan Chatterjee
Keyword(s):  
Mechanical Properties ◽  
Low Cost ◽  
Natural Fibers ◽  
High Strength ◽  
Low Density ◽  
Intrinsic Properties ◽  
Environment Friendly ◽  
Complex Shapes ◽  
Strength And Durability ◽  
Comprehensive Study

AbstractThe inherent properties of bio-composites such as biodegradability, environment friendly, low cost of production, high strength and durability make them a suitable replacement to traditional materials such as glass and nylon. Bio-polymers are finding wide applications due to their intrinsic properties such as low density, low thermal conductivity, corrosion resistance and ease of manufacturing complex shapes. This paper aims toward a comprehensive study on polymer bio-composites. The review mainly focuses on types of reinforcements such as natural fibers, seed shells, animal fibers, cellulose, bio-polymers, bio-chemicals and bioceramics which enhance the mechanical properties, such as tensile strength, compressive strength, flexural strength, Young’s modulus and creep behavior, of the composites. The pertinent study carried out in this review explores an enormous potentiality of the composites toward a wide variety of applications.

Mechanical Properties and Microstructure of Aramid/Al2O3/Epoxy Resin Laminated Composites

2008 ◽  
Vol 55-57 ◽  
pp. 389-392
Author(s):  
Supreyak Kumfu ◽  
Wim Nhuapeng ◽  
Wandee Thamjaree ◽  
Tawee Tunkasiri
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Epoxy Resin ◽  
Laminated Composites ◽  
Scratch Resistance ◽  
Resin Matrix ◽  
Sem Images ◽  
Laminate Composites ◽  
Al2o3 Powder ◽  
Casting Technique

Aramid/Al2O3/epoxy resin laminated composites were fabricated using ultrasonic mixing and casting technique. This novo material could be exhibited to the ideal mechanical properties such as high tensile strength, hardness, flexural strength and lightweight which may be used to replace metal parts in vehicles. Moreover, Al2O3 powder was mixed to epoxy resin to improve the scratch resistance. To improve the bending force and interaction between Al2O3 powder phase and epoxy resin phase, the ultrasonic mixing was used for fabricating these laminate composites. The physicals and mechanical properties such as density, hardness, impact test, wear resistance and tensile strength of the composites samples were investigated. It was found that the amounts of percent by volume of the Al2O3 have affected the properties of the laminated composites. Furthermore, microstructures of specimens were also investigated by scanning electron microscope (SEM). From the results, SEM images showed good distribution and adhesion between reinforced phase and epoxy resin matrix phase.

scholarly journals Mechanical Properties and Biodegradability of the Kenaf/Soy Protein Isolate-PVA Biocomposites

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Jong Sung Won ◽  
Ji Eun Lee ◽  
Da Young Jin ◽  
Seung Goo Lee
Keyword(s):  
Mechanical Properties ◽  
Soy Protein ◽  
Low Cost ◽  
Soy Protein Isolate ◽  
Natural Fibers ◽  
Protein Isolate ◽  
Poly Vinyl Alcohol ◽  
Cross Linking ◽  
Adhesion Properties ◽  
The Cross

The effective utilization of original natural fibers as indispensable components in natural resins for developing novel, low-cost, eco-friendly biocomposites is one of the most rapidly emerging fields of research in fiber-reinforced composite. The objective of this study is to investigate the interfacial adhesion properties, water absorption, biodegradation properties, and mechanical properties of the kenaf/soy protein isolate- (SPI-) PVA composite. Experimental results showed that 20 wt% poly (vinyl alcohol) (PVA) and 8 wt% glutaraldehyde (GA) created optimum conditions for the consolidation of the composite. The increase of interfacial shear strength enhanced the composites flexural and tensile strength of the kenaf/SPI-PVA composite. The kenaf/SPI-PVA mechanical properties of the composite also increased with the content of cross-linking agent. Results of the biodegradation test indicated that the degradation time of the composite could be controlled by the cross-linking agent. The degradation rate of the kenaf/SPI-PVA composite with the cross-linking agent was lower than that of the composite without the cross-linking agent.

FDM Prototype Experimental Research of Processing Parameter Optimization to Achieve Higher Tensile Stress

2015 ◽  
Vol 220-221 ◽  
pp. 767-773 ◽  
Author(s):  
Ilmars Brensons ◽  
Svetlana Polukoshko ◽  
Andris Silins ◽  
Natalija Mozga
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Epoxy Resin ◽  
Fused Deposition Modeling ◽  
Low Cost ◽  
Rapid Prototype ◽  
Layer By Layer ◽  
Processing Parameter ◽  
Practical Applications ◽  
Fused Deposition

Fused Deposition Modeling (FDM) is one of most common ways of rapidly producing a part. Heated material (most commonly – plastic) is used to extrude it through a nozzle and deposit on a surface layer by layer until the part is fully produced. FDM has become one of the most popular in rapid production area due to its low cost, available materials and versatility.Due to fact that part is made layer by layer and each additional layer is deposited on top of a layer that is already a little below material melting point, part maintains different mechanical properties in various directions. These varying mechanical properties affect the part usability in practical applications. Critical point is tensile strength.The objective of this paper is to research optimal processing parameters for FDM prototyping to improve tensile strength. Several rapid prototype models (tensile test samples) with various geometry of longitudinal reinforcement channels were built. As reinforcing material, the epoxy resin was used, because it has higher tensile strength when solid and allows filling channels with various geometry. All made samples were tested for tensile strength. Experiment was carried out to confirm the effectiveness of this approach. From the results, it is found how different amount of epoxy resin affects part tensile strength.

Sign in / Sign up

Export Citation Format

Share Document